RF / Microwave - Aeroflex Microelectronic Solutions

Limiters
Detectors
Switches, Switch Matrices
Attenuators
Phase Shifters
Directional Couplers
Power Dividers
Integrated Assemblies
RF / Microwave
Components & Subsystems
2011
Table of Contents
Limiters
4 - 11
Detectors
12 - 31
Switches/Switch Matrices
32 - 49
Attenuators
50 - 53
Phase Shifters
54 - 57
Couplers
58 -63
Power Dividers
64 - 70
Phase Trimmer
71
Integrated Assemblies
72 - 74
Index
75 - 80
w w w. a e r o f l e x . c o m / a c c
|
1 - 7 3 2 - 4 6 0 - 0 2 12
| 1
Introduction
Aeroflex Control Components (ACC) – formed in September 2010 from the merger of
Advanced Control Components and Aeroflex / KDI-IP – is a supplier of high-performance
solid-state RF and microwave components and sub-systems serving the military,
aerospace, commercial and instrumentation markets.
ACC’s 49,000 square foot facility is located in Eatontown, New Jersey, to
serve our US and International customers. Resources include
comprehensive in-house design, manufacturing and test capabilities to
40GHz. All manufacturing and test operations are performed in our
state-of-the-art production facility. ACC has an ISO-9001:2008 accredited
quality system and as part of our commitment to continuous improvement,
all employees participate in comprehensive training programs, keeping
pace with industry innovations. We are proud to have achieved
approved-supplier status on many military and space programs such as
Predator, MRAP, F-16, AEGIS, THAAD and dozens more.
Our team of design engineers has extensive experience in passive and active component
design and sub-system integration. By utilizing the latest and most advanced CAD
software, we offer comprehensive design, test, and manufacturing solutions.
Aeroflex Control Components is your source for the following standard
products
• Attenuators – Digital, Voltage Variable and Current Controlled
• Detectors – Schottky and Tunnel Detectors up to 40GHz
• Directional Couplers – Stripline Couplers in 6dB, 10dB, 20dB and 30dB Coupling
Values
• Limiters – Low Leakage and High Power Surface mount and coaxial to 40GHz
• Phase Shifters – Digital, Voltage Variable and Current Controlled
• Power Dividers – 2 way, 4 way, 6 way and 8 way Products up to 18GHz
• Switches – SPST to SP6T and Transfer switches 0.01 to 18GHz
• High Power T/R Switches – 0.01 to 6GHz up to 200W CW
Our custom capabilities include
• Custom PIN diode and GaAsFET based switches and switch assemblies
• Custom Integrated Assemblies with complete design, manufacturing and test to
40GHz
2 | w w w . a e r o f l e x . c o m / a c c | 1 - 7 3 2 - 4 6 0 - 0 2 12
Quick Turn Components
Over 2700 standard components available for delivery in 30 days or less. Including single pole, single - throw switches through
single pole, six throw switches, transfer switches, broad band switches and phase trimmers.
For Product Availability See Pages
Single Pole, Single - Throw Switches
Page 32,33
Single Pole, Two - Throw Switches
Page 34,35
Single Pole, Three - Throw Switches
Page 36,37
Single Pole, Four - Throw Switches
Page 38,39
Single Pole, Five - Throw Switches
Page 40,41
Single Pole, Six - Throw Switches
Page 42,43
Transfer Switches
Page 44,45
Broad Band Switches
Page 46,47
Phase Trimmer
Page 71
A library of standard and custom configurations are available to help you design the best jamming or transmitting system you can
imagine with over 2,700 catalog switches available in 30 days or less. Call or visit our website for details.
w w w. a e r o f l e x . c o m / a c c
|
1 - 7 3 2 - 4 6 0 - 0 2 12
| 3
Limiters
Pin Diode Limiters
PIN diode limiters are built to protect sensitive circuit elements such as receiver front
ends or detectors. They reduce high power inputs to a low level that can protect critical
components in the RF chain. Limiters may be categorized as conventional or feedback
types. The family of conventional limiters typically exhibits leakage levels up to +20dBm
with recovery times less than 40nsec. These models handle up to 100W peak power
levels and cover the frequency range form 100MHz to 40GHz. The limiters one dB
compression is around +11 dBm. Custom models with higher power handling are
available.
Features
atures
• Low Insertion Loss
• Low Leakage Power Circuit Protection
• High CW Power Handling
• Hermetically Sealed Modules
• Assorted Package Styles
• Custom Designs Available
PIN DIODE LIMITERS
Frequency Part Number
Range
(GHz)
0.1 - 1.1
0.5 - 2
0.1 - 4
1-4
2-4
0.5 - 6
2-8
0.5 - 8
1-8
4-8
2 - 12
8 - 12
0.5 - 18
2 – 18
8 - 18
18 - 26
18 - 40.0
ACLM-4538
ACLM-4530
ACLM-4637
ACLM-4581
ACLM-4531
ACLM-4700
ACLM-4540
ACLM-4606
ACLM-4597
ACLM-4532
ACLM-4535
ACLM-4533
ACLM-4601
ACLM-4537
ACLM-4539
ACLM-4765
ACLM-4776
Peak
Input
Power
(W)
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
CW
Maximum
Input Flat Leakage
Power (Peak Power)
(Watts)
(+dBm)
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
Maximum
Flat
Leakage
(CW Power)
(+dBm)
Maximum
Insertion
Loss
(dB)
Maximum
VSWR
Standard
Case
Styles
Optional
Case
Styles
18
18
17
17
17
17
17
17
17
17
18
18
18
18
18
21
20
0.4
0.4
0.5
0.5
0.5
0.7
1.0
1.0
1.0
1.0
1.5
1.5
1.8
1.8
1.8
2.5
4.0
1.4:1
1.4:1
1.4:1
1.4:1
1.4:1
1.5:1
1.5:1
1.5:1
1.5:1
1.5:1
1.6:1
1.6:1
1.9:1
1.9:1
1.9:1
2.0:1
2.5:1
C3
C3
C3
C3
C3
C3
C3
C3
C3
C3
C3
C3
C36
C36
C36
C36
C43
C36,C37,M22
C36,C37,M22
C36,C37,M22
C36,C37,M22
C36,C37,M22
C36,C37,M22
C36,C37,M22
C36,C37,M22
C36,C37,M22
C36,C37,M22
C36,C37,M22
C36,C37,M22
C37,M22
C37,M22
C37,M22
C37,M22
-
20
20
20
20
20
20
20
20
20
20
21
21
21
21
21
23
23
NOTES
SCREENING
1.
Typically CW leakage is measured at mid-band with 1W input.
2.
Higher power handling available. Contact the factory to discuss
specific requirements.
Power handling is linearly derated from full power at +25°C to
zero power at +150°C.
Standard Screening:
Internal Visual per MIL-STD-883, Method 2017
Temperature Cycle: -65°C to +100°C, 10 cycles
Optional High-Rel Screening (Ref MIL-PRF-38534):
Internal Visual per MIL-STD-883, Method 2017
Stabilization Bake per MIL-STD-883, Method 1008
Temperature Cycle per MIL-STD-883, Method 1010
Constant Acceleration per MIL-STD-883, Method 2001
Burn-in per MIL-STD-883, Method 1015
Leak Test per MIL-STD-883, Method 1014
External Visual per MIL-STD-883, Method 2009
3.
4 | w w w . a e r o f l e x . c o m / a c c | 1 - 7 3 2 - 4 6 0 - 0 2 12
Limiters
Pin Diode Limiters
OUTLINE CASE STYLE C3
OUTLINE CASE STYLE M22
SMA MALE
(INPUT)
0.120
0.080
SMA FEMALE
(OUTPUT)
0.250
0.120
0.532
0.246
±.003
0.312
0.012 TYP.
OUTPUT
INPUT
.29
.43
1.32±.02
(TYPICAL WEIGHT = 9.0g)
0.129
0.059
(TYPICAL WEIGHT =1.55g)
OUTLINE CASE STYLE C36
OUTLINE CASE STYLE C37
1.417±.010
0.530
(REF)
0.192
0.140
0.072
1.282±0.010
0.532
(REF)
0.250
0.192
0.250
0.140
0.072
BLACK DOT DENOTES
DEVICE INPUT PORT
0.480
SMA MALE
(INPUT)
SMA FEMALE
(OUTPUT)
R0.050±0.005 FULL RADIUS
SLOT (2 PLCS.)
0.480
0.625
SMA FEMALE
(INPUT)
R0.050±0.005 FULL RADIUS
SLOT (2 PLCS.)
0.625
SMA FEMALE
(OUTPUT)
2X 0.375
0.122
(TYPICAL WEIGHT = 13.0g)
(TYPICAL WEIGHT = 13.0g)
PART NUMBER ORDERING INFORMATION
Example:
ACLM-4533:
C3:
R:
1K:
ACLM-4533C3R1K
Conventional limiter, 8 - 12GHz
Package type
Reversed Connectors (Omit for standard configuration)
1kW peak power handling (Omit for standard 100W peak power handling)
w w w. a e r o f l e x . c o m / a c c
|
1 - 7 3 2 - 4 6 0 - 0 2 12
| 5
Limiters
Pin Diode Low Leakage Limiters
Low Leakage limiters are designed to have lower threshold and leakage levels than those
of conventional limiters in order to protect more sensitive components. They incorporate
input PIN diode limiters which are biased by a quasi-active driver. Most circuits include
DC blocks, which are required for proper operation.
In some very low frequency models, it is not possible to include DC blocks. The
application must be such that no low impedance DC path from the center conductor to
ground exists outside the unit. The limiter threshold (1dB compression) is typically
+5dBm.
Low Leakage limiters will also handle peak power levels above 100W (1usec pulse width,
0.001 duty cycle, and 1kHz repetition rate). Peak leakages are higher than CW leakages
as they are with conventional limiters. This becomes exaggerated at frequencies below
2GHz.
Features
• Low Insertion Loss
• Low Leakage Power Circuit Protection
• High CW Power Handling
• Hermetically Sealed Modules
• Assorted Package Styles
• Custom Designs Available
PIN DIODE LOW LEAKAGE LIMITERS
Frequency
Range
(GHz)
Part Number
Peak
Input
Power
(W)
0.02 - 0.1
0.1 - 0.2
0.02 - 0.5
0.03 - 1
0.1 - 1
0.1 - 2
0.5 - 2
1-2
2-4
0.5 - 6
0.5 - 8
2-8
4-8
0.4 - 12
8 - 12
1 - 18
2 - 18
6 - 18
8 - 18
18 - 26.5
ACLM-4885F
ACLM-4769F
ACLM-4594F
ACLM-4675F
ACLM-4786F
ACLM-4800F
ACLM-4650F
ACLM-4586F
ACLM-4732F
ACLM-4700F
ACLM-4759F
ACLM-4504F
ACLM-4572F
ACLM-4727F
ACLM-4571F
ACLM-4618F
ACLM-4619F
ACLM-4616F
ACLM-4797F
ACLM-4809F
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
CW
Maximum
Input
Flat
Power
Leakage
(Watts) (CW Power)
(+dBm)
1
1
3
3
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
15
11
13.5
13.5
13.5
13.5
13.5
13.5
13.5
13.5
13.5
13
13
13
13
13
13
13
13
15
Maximum
Insertion
Loss
(dB)
Maximum
VSWR
Standard
Case
Styles
Optional
Case
Styles
0.5
0.5
0.4
0.3
0.3
0.5
0.5
0.5
0.6
0.8
1.0
0.8
1.0
1.5
1.5
2.4
2.4
2.4
2.4
2.8
1.7:1
1.7:1
1.3:1
1.3:1
1.3:1
1.3:1
1.4:1
1.3:1
1.4:1
1.5:1
1.7:1
1.5:1
1.8:1
1.8:1
1.8:1
2.4:1
2.2:1
2.2:1
2.2:1
2.0:1
C3
C3
C3
C3
C3
C3
C3
C3
C3
C3
C3
C3
C3
C3
C3
C36
C36
C36
C36
C36
C36,C37,M10,M22
C36,C37,M10,M22
C36,C37,M10,M22
C36,C37,M10,M22
C36,C37,M10,M22
C36,C37,M10,M22
C36,C37,M10,M22
C36,C37,M10,M22
C36,C37,M22
C36,C37,M22
C36,C37,M22
C36,C37,M22
C36,C37,M22
C36,C37,M22
C36,C37,M22
C37,M22
C37,M22
C37,M22
C37,M22
C37,M22
NOTES
SCREENING
1.
Typically CW leakage is measured at mid-band with 1W input.
2.
Higher power handling available. Contact the factory to discuss
specific requirements.
Power handling is linearly derated from full power at +25°C to
zero power at +150°C.
Standard Screening:
Internal Visual per MIL-STD-883, Method 2017
Temperature Cycle: -65°C to +100°C, 10 cycles
Optional High-Rel Screening (Ref MIL-PRF-38534):
Internal Visual per MIL-STD-883, Method 2017
Stabilization Bake per MIL-STD-883, Method 1008
Temperature Cycle per MIL-STD-883, Method 1010
Constant Acceleration per MIL-STD-883, Method 2001
Burn-in per MIL-STD-883, Method 1015
Leak Test per MIL-STD-883, Method 1014
External Visual per MIL-STD-883, Method 2009
3.
6 | w w w . a e r o f l e x . c o m / a c c | 1 - 7 3 2 - 4 6 0 - 0 2 12
Limiters
Pin Diode Low Leakage Limiters
OUTLINE CASE STYLE C3
OUTLINE CASE STYLE C37
1.282±0.010
0.532
(REF)
0.192
SMA MALE
(INPUT)
0.250
0.140
0.072
BLACK DOT DENOTES
DEVICE INPUT PORT
SMA FEMALE
(OUTPUT)
0.480
0.625
0.312
SMA FEMALE
(INPUT)
R0.050±0.005 FULL RADIUS
SLOT (2 PLCS.)
.29
.43
1.32±.02
SMA FEMALE
(OUTPUT)
2X 0.375
(TYPICAL WEIGHT = 9.0g)
0.122
(TYPICAL WEIGHT = 13.0g)
OUTLINE CASE STYLE C36
OUTLINE CASE STYLE M22
1.417±.010
0.530
(REF)
0.192
0.120
0.080
0.140
0.250
0.120
0.532
0.250
0.072
0.480
0.246
±.003
0.012 TYP.
0.625
OUTPUT
INPUT
SMA MALE
(INPUT)
SMA FEMALE
(OUTPUT)
R0.050±0.005 FULL RADIUS
SLOT (2 PLCS.)
0.129
0.059
(TYPICAL WEIGHT =1.55g)
(TYPICAL WEIGHT = 13.0g)
OUTLINE CASE STYLE M10
.440
(REF)
.320
.270 SQ. MAX.
1
.015±.002
(TYP.)
.035
10
2
9
3
8
4
7
5
6
R.016
(4) PLCS.
.050 TYP
.200
.045
.085
.005
.080
MAX.
PIN
1
2
3
4
5
10
9
8
7
6
CONNECTION
N/C
INPUT
N/C
N/C
GND
GND
N/C
N/C
OUTPUT
N/C
(TYPICAL WEIGHT = 0.27g)
PART NUMBER ORDERING INFORMATION
Example:
ACLM-4504F:
C3:
R:
1K:
ACLM-4504FC3R1K
Low Leakage limiter, 2 - 8GHz
Package type
Reversed Connectors (Omit for standard configuration)
1kW peak power handling (Omit for standard 100W peak power handling)
w w w. a e r o f l e x . c o m / a c c
|
1 - 7 3 2 - 4 6 0 - 0 2 12
| 7
Limiters
Coaxial High Power Limiters
This series of high power limiters was developed to protect sensitive receiver circuits
from close proximity threats (e.g. high power radar or communication transmitters). The
standard models handle up to 60W CW while the higher power models can handle up to
100W CW. All models handle 1000W peak and exhibit low insertion loss and leakage
levels. The limiters are available in either type N (male-to-male) or SMA connector
versions
Features
• Low Insertion Loss
• Low Leakage Power Circuit Protection
• High CW Power Handling
• Assorted Package Styles
COAXIAL HIGH POWER LIMITERS
Frequency
Range
(MHz)
Part Number
Peak
Input
Power
(KW)
CW
Input
Power
(Watts)
Maximum
Flat
Leakage
(CW Power)
(+dBm)
Maximum
Insertion
Loss
(dB)
Maximum
VSWR
Standard
Case
Styles
Optional
Case
Styles
0.5 - 30
30 - 100
10 - 500
100 - 500
100 - 1000
200 - 1000
1200 - 1400
2 - 1500
200 - 1500
0.1 - 2000
1 - 2000
20 - 2000
500 - 2000
1000 - 2000
2 - 2500
0.1 - 3000
500 - 3000
2000 - 3000
600 - 3100
2700 - 3100
3000 - 3700
2000 - 4000
ACLM-4869
ACLM-4870
ACLM-4827
ACLM-4930
ACLM-4871
ACLM-4903
ACLM-4603
ACLM-4932
ACLM-4904
ACLM-4897
ACLM-4874
ACLM-4924
ACLM-4947
ACLM-4851
ACLM-4918
ACLM-4896
ACLM-4829
ACLM-4828
ACLM-4891
ACLM-4852
ACLM-4905
ACLM-4943
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
14
14
14
14
14
14
14
14
14
14
14
13
14
14
13
13
13
13
13
13
13
13
0.1
0.1
0.1
0.2
0.2
0.2
0.25
0.25
0.25
0.3
0.3
0.35
0.35
0.35
0.38
0.4
0.5
0.5
0.5
0.5
0.8
1.2
1.25:1
1.25:1
1.25:1
1.25:1
1.28:1
1.28:1
1.25:1
1.25:1
1.25:1
1.25:1
1.25:1
1.25:1
1.25:1
1.25:1
1.25:1
1.25:1
1.25:1
1.25:1
1.25:1
1.25:1
1.9:1
2.0:1
C46
C46
C46
C46
C46
C46
C46
C46
C46
C46
C46
C46
C46
C46
C46
C46
C46
C46
C46
C46
C46
C46
C24,C25,C88,C89,M70
C24,C25,C88,C89,M70
C24,C25,C88,C89,M70
C24,C25,C88,C89,M70
C24,C25,C88,C89,M70
C24,C25,C88,C89,M70
C24,C25,C88,C89,M70
C24,C25,C88,C89,M70
C24,C25,C88,C89,M70
C24,C25,C88,C89,M70
C24,C25,C88,C89,M70
C24,C25,C88,C89,M70
C24,C25,C88,C89,M70
C24,C25,C88,C89,M70
C25,C25,C88,C89,M70
C24,C25,C88,C89,M70
C24,C25,C88,C89,M70
C24,C25,C88,C89,M70
C24,C25,C88,C89,M70
C24,C25,C88,C89,M70
C24,C25,C88,C89,M70
C24,C25,C88,C89,M70
*All models rated for 60W CW are available as 100W CW versions. The part number requires the suffix ”H” added following the part number to
indicate higher power rating. Refer to part number ordering information for details.
NOTES
SCREENING
1.
2.
Test conditions: Full rated power for 30 seconds.
Insertion loss is slightly higher for the high power versions.
3.
Most models are broadband and will operate beyond the
frequency ranges shown.
Typical leakage is 3dB below the maximum shown.
Power handling is linearly derated from full power at +25°C to
zero power at +150°C.
All models require external DC blocks for proper operation.
Standard Screening:
Internal Visual per MIL-STD-883, Method 2017
Temperature Cycle: -65°C to +100°C, 10 cycles
Optional High-Rel Screening (Ref MIL-PRF-38534):
Stabilization Bake per MIL-STD-883, Method 1008
Temperature Cycle per MIL-STD-883, Method 1010
Constant Acceleration per MIL-STD-883,
Method 2001
Burn-in per MIL-STD-883, Method 1015
External Visual per MIL-STD-883, Method 2009
4.
5.
6.
8 | w w w . a e r o f l e x . c o m / a c c | 1 - 7 3 2 - 4 6 0 - 0 2 12
Limiters
Coaxial High Power Limiters
OUTLINE CASE STYLE C24
OUTLINE CASE STYLE C25
3.90±.02
Ø.790
2.730±0.020
1.86
SMA MALE
INPUT
1.20
.38
.33
.13
.75
.38
.38
.75
.49
Ø.746
SMA FEMALE
OUTPUT
.50
REF.
TYPE "N"
MALE CONNECTOR
Ø0.125 THRU
(4) PLCS.
(TYPICAL WEIGHT = 46.0g)
(TYPICAL WEIGHT = 96.0g)
OUTLINE CASE STYLE C46
OUTLINE CASE STYLE M70
1.86
2.61±.020
.75
.38
2X Ø.036
PIN
1.86
1.20
.38
.33
2X .07
.13
.38
.75
1.20
.49
.44
.12
.33
SMA FEMALE
(2) PLCS.
Ø0.125 THRU
(4) PLCS.
.38
.75
(TYPICAL WEIGHT = 46.0g)
.52
.22
4X .125 THRU
(TYPICAL WEIGHT = 23.27g)
OUTLINE CASE STYLE C88
OUTLINE CASE STYLE C89
3.70±.02
Ø.790
3.80±.02
Ø.746
Ø.625
Ø.746
TYPE "N"
BULKHEAD MOUNT JACK
FEMALE CONNECTOR
TYPE "N"
BULKHEAD MOUNT JACK
FEMALE CONNECTOR
(OUTPUT)
TYPE "N"
MALE CONNECTOR
(INPUT)
(TYPICAL WEIGHT = 76.09g)
(TYPICAL WEIGHT = 85.81g)
PART NUMBER ORDERING INFORMATION
Example:
ACLM-4924:
H:
C46:
ACLM-4924HC46
High Power Limiter, 20 - 2000MHz
100W CW Power Handling (omit for standard 60 W CW Power Handling)
Package type
w w w. a e r o f l e x . c o m / a c c
|
1 - 7 3 2 - 4 6 0 - 0 2 12
| 9
Limiters
Surface Mount Limiters
This series of surface mount limiters was developed to offer higher power handling than
our conventional limiters in a small compact design. Covering the band from 20 – 6000
MHz these devices can limit input power levels of 10W CW over the operating temperature
range of -55C to +85C. Peak power handling is rated to 1kW with a 1us pulse width and
a 0.1% duty cycle. Typical leakage levels are less than 12.5dBm (measured at 1W input).
These units are available in both drop-in and surface mount packages. Coaxial
configurations are available upon request
Features
• Low Insertion Loss
• Low Leakage Power Circuit Protection
• High CW Power Handling
• Hermetically Sealed Modules
SURFACE MOUNT LIMITERS
Frequency
Range
(GHz)
Part Number
Peak
Input
Power
(W)
0.02 – 3.0
0.02 – 6.0
2.0 – 6.0
0.02 - 1.0
ACLM-4812F
ACLM-4748F
ACLM-4805F
ACLM-4866F
1000
1000
1000
1000
CW
Maximum
Input
Flat
Power
Leakage
(Watts) (CW Power)
(+dBm)
10
10
10
10
12.5
12.5
12.5
12.5
Maximum
Insertion
Loss
(dB)
Maximum
VSWR
Standard
Case
Styles
Optional
Case
Styles
1.0
1.0
1.0
0.7
1.4:1
1.4:1
1.4:1
1.4:1
M17
M17
M17
M17
M16, M22
M22
M22
M16, M22
NOTES
SCREENING
1.
Typically CW leakage is measured at mid-band with 1W input.
2.
Power handling is rated from -55°C to +85°C.
Standard Screening:
Internal Visual per MIL-STD-883, Method 2017
Temperature Cycle: -65°C to +100°C, 10 cycles
Optional High-Rel Screening (Ref MIL-PRF-38534):
Internal Visual per MIL-STD-883, Method 2017
Stabilization Bake per MIL-STD-883, Method 1008
Temperature Cycle per MIL-STD-883, Method 1010
Constant Acceleration per MIL-STD-883, Method 2001
Burn-in per MIL-STD-883, Method 1015
Leak Test per MIL-STD-883, Method 1014
External Visual per MIL-STD-883, Method 2009
PART NUMBER ORDERING INFORMATION
Example:
ACLM-4812:
M16:
ACLM-4812FM16
10 W Limiter, 20 - 6000MHz
Package type
10 | w w w . a e r o f l e x . c o m / a c c | 1 - 7 3 2 - 4 6 0 - 0 2 12
Limiters
Surface Mount Limiters
OUTLINE CASE STYLE M15
OUTLINE CASE STYLE M22
.440
(REF)
.320
.270 SQ. MAX.
.015±.002
(TYP.)
.035
1
10
2
9
3
8
4
7
5
6
R.016
(4) PLCS.
0.120
0.080
0.250
0.120
0.532
.050 TYP
.200
0.246
±.003
0.012 TYP.
OUTPUT
INPUT
.045
.085
0.129
0.059
.005
(TYPICAL WEIGHT =1.55g)
.080
MAX.
(TYPICAL WEIGHT = 0.27g)
PIN
1
2
3
4
5
CONNECTION
GND
INPUT
INPUT
GND
GND
PIN
10
9
8
7
6
CONNECTION
GND
OUTPUT
OUTPUT
GND
GND
OUTLINE CASE STYLE M17
.266 [6.76]
.060 [1.52]
.016 [0.40]
.276 [7.00]
SQUARE
PIN IDENTIFIER
.070 [1.78] X2
1
.020 [0.50] X2
.034 [0.87] X8
.010 [0.25] X2
.039 [1.00] X6
ELECTRICAL
AND THERMAL
CU/MO BASE
.079 [2.00] X2
ATTENTION:
THIS IS A TOP VIEW (AS MOUNTED)
(TYPICAL WEIGHT = 0.18g)
PINOUT MATRIX
PIN
1
2
3
4
5
6
7
8
FUNCTION
N/C
GND
RF INPUT
GND
N/C
N/C
N/C
N/C
PIN
9
10
11
12
13
14
15
16
FUNCTION
N/C
N/C
GND
OUTPUT
GND
N/C
N/C
N/C
NOTE: FOR BEST ELECTRICAL PERFORMANCE BASE AND CORNER TAB MUST BE
GROUNDED
w w w. a e r o f l e x . c o m / a c c
|
1 - 7 3 2 - 4 6 0 - 0 2 12
| 11
Detectors
Bias Coaxial Schottky Detectors
High sensitivity and superior electrical and environmental reliability characterize these
module detectors. They are hermetically sealed and contain internal RF matching, DC
return, and RF bypass capacitor. In addition, the video port can be protected from static
or transient voltages. This feature prevents damage due to handling (usually static) or
system video transients. Models may be chosen for broadband RF performance or for
optimized narrow bands. They may be used in microstrip or stripline applications for
power monitoring, broadband ECM receivers, radar equipment, beacon or multi-channel
receivers.
Features
• Static Protection
• High Sensitivity
• Small Size
BIASED COAXIAL SCHOTTKY DETECTORS
Frequency
Range
(MHz)
Part Number
Minimum
Sensitivity
K
(mV/mW)
Flatness
vs
Frequency
(+/-dB)
Typical (2)
TSS
(dBm)
Nominal
Video
Capacitance
(pF)
Standard
Case
Styles
Optional
Case
Styles
0.1 - 1
0.1 - 2
0.5 - 2
1-4
2-4
2-6
1-6
4-8
0.5 - 12
1 - 12
2 - 12
8 - 12
0.5 - 18
1 - 18
2 - 18
6 - 18
12 - 18
ACSP-2517N
ACSP-2538N
ACSP-2501N
ACSP-2630N
ACSP-2502N
ACSP-2546N
ACSP-2656N
ACSP-2503N
ACSP-2658N
ACSP-2762N
ACSP-2507N
ACSP-2504N
ACSP-2572N
ACSP-2759N
ACSP-2506N
ACSP-2523N
ACSP-2505N
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2100
1800
1500
1800
1800
2000
0.28
0.3
0.3
0.3
0.2
0.3
0.5
0.3
1.3
1.5
1.1
0.4
1.5
1.25
1.5
1.0
0.6
-52
-52
-53
-53
-53
-53
-53
-53
-52
-51
-53
-53
-52
-50
-51
-51
-52
270
270
75
39
20
12
12
12
75
20
12
12
12
20
12
12
12
C3
C3
C3
C3
C3
C3
C3
C3
C3
C3
C3
C3
C3
C3
C3
C3
C3
C8,C15, C32
C8,C15, C32
C8,C15, C32
C8,C15, C32
C8,C15, C32
C8,C15, C32
C8,C15, C32
C8,C15, C32
C8,C15, C32
C8,C15, C32
C8,C15, C32
C8,C15, C32
C15, C32
C15, C32
C15, C32
C15, C32
C15, C32
NOTES
EACH DETECTOR MODEL CONTAINS
1.
Input Impedance Matching
DC return
RF bypass capacitor
Detector diode
Video protection diode
2.
3.
4.
5.
Available in both negative and positive polarities, substitute “N” or “P” in part
number.
Tangential Signal Sensitivity (TSS) is a measure of low level sensitivity with
respect to noise. It is measured using a video amplifier with a 2MHz
bandwidth and a 3dB noise figure.
Video capacitance is used for RF bypass. This value can be changed if
required for video response time or other considerations. Contact the factory
if value other than those shown are needed.
Video protection is available on most models. This feature helps to prevent
damage to the detector diode from incidents occurring at the video port.
Transient electromagnetic spikes, static contact, or voltage surges can easily
damage a detector diode. A video protection diode will clamp the voltage at
a value less than the detector breakdown voltage. NOTE: Inclusion of this
protection will cause the output voltage to compress and clamp. This occurs
at about +10dBm input to the detector. If operation above +10dBm is
required then the output protection should be modified or excluded. Contact
the factory for assistance.
Zero bias schottky versions are available for most of listed biased schottky
models with only minor differences in specifications.
•
The zero bias schottky has an impedance of several thousand ohms.
•
Zero bias schottky detectors exhibit less sensitive TSS due to the high
diode impedance (typically a 3dB reduction).
•
The temperature performance of the zero bias schottky is poor when
operating at low input power levels. This difference becomes small at high
levels (above 0dBm input power). The part number of zero bias versions
includes a “Z” following the polarity indicator.
12 | w w w . a e r o f l e x . c o m / a c c | 1 - 7 3 2 - 4 6 0 - 0 2 12
APPLICATIONS
Transmitter Monitoring
Radar Equipment
Missile Guidance Systems
Input to Low-Noise Amplifiers
Broadband Or Narrowband ECM Receivers
Power and Signal Monitors
Doppler Radar and Beacon Receivers
Matched units available for Multi-channel Receivers,
Amplitude Comparator Systems and Discriminators
Detectors
Bias Coaxial Schottky Detectors
OUTLINE CASE STYLE C3
OUTLINE CASE STYLE C8
SMA MALE
(INPUT)
TYPE-N MALE
(INPUT)
SMA FEMALE
(OUTPUT)
BNC FEMALE
(OUTPUT)
0.312
0.625
0.825
.29
.43
1.32±.02
(TYPICAL WEIGHT = 9.0g)
2.80±.02
(TYPICAL WEIGHT = 60.8g)
OUTLINE CASE STYLE C15
OUTLINE CASE STYLE C32
2.00
0.420
0.430
1.16±.02
0.500±.010
.312
(7.92MM)
BNC FEMALE
(OUTPUT)
SMA MALE
(INPUT)
SMA FEMALE
(OUTPUT)
SMA MALE
(INPUT)
(TYPICAL WEIGHT = 7.09g)
(TYPICAL WEIGHT = 26.9g)
SCREENING
PART NUMBER ORDERING INFORMATION
Standard Screening:
Internal Visual per MIL-STD-883, Method 2017
Temperature Cycle: -65°C to +100°C, 10 cycles
Optional High-Rel Screening (Ref MIL-PRF-38534):
Internal Visual per MIL-STD-883, Method 2017
Stabilization Bake per MIL-STD-883, Method 1008
Temperature Cycle per MIL-STD-883, Method 1010
Constant Acceleration per MIL-STD-883,
Method 2001
Burn-in per MIL-STD-883, Method 1015
Leak Test per MIL-STD-883, Method 1014
External Visual per MIL-STD-883, Method 2009
Example:
ACSP-2503NZC3V-20
ACSP-2503: Biased Coaxial Schottky Detector, 4 - 8GHz
N:
Negative output polarity
Z:
Zero bias version (Omit for biased version)
V:
Add Video Protection
20:
20 pF custom output capacitance
(Omit for standard value)
w w w. a e r o f l e x . c o m / a c c
|
1 - 7 3 2 - 4 6 0 - 0 2 12
| 13
Detectors
Bias Coaxial Schottky Detectors
(with Internal Pads or Resistors)
This family of padded input detectors allows for higher input power read and
better VSWR than pure biased schottky units. They come in a variety of package styles.
Module versions for microstrip or stripline applications are also available.
Features
• Static Protection
• High Sensitivity
• Small Size
BIASED COAXIAL SCHOTTKY DETECTORS
Frequency
Range
(MHz)
Part Number
Minimum
Sensitivity
K
(mV/mW)
Flatness
vs
Frequency
(+/-dB)
Typical
VSWR
Nominal
Video
Capacitance
(pF)
Standard
Case
Styles
Optional
Case
Styles
0.005 - 0.05
0.05-0.5
0.001 - 1
0.1 - 1
0.01 - 4
0.01 - 4
4-8
8 - 12
0.01 - 20
0.01 - 20
ACSP-2531N
ACSP-2543N
ACSP-2609N
ACSP-2761N
ACSP-2755N
ACSP-2655N
ACSP-2602N
ACSP-2667N
ACSP-2644N
ACSP-2643N
750
1600
1800
1200
1800
600
600
750
500
900
0.1
0.3
0.2
0.2
0.4
0.4
0.3
0.5
1.0
1.5
2.0:1
2.0:1
2.0:1
2.0:1
2.0:1
1.25:1
1.5:1
1.9:1
1.8:1
2.8:1
1000
270
470
1000
270
270
10
10
12
75
C3
C3
C3
C3
C3
C3
C3
C3
C3
C3
C8,C15
C8,C15
C8,C15
C8,C15
C8,C15
C8,C15
C8,C15,C32
C8,C15,C32
C15,C32
C15,C32
NOTES
EACH DETECTOR MODEL CONTAINS
1.
Input Impedance Matching
DC return
RF bypass capacitor
Detector diode
2.
3.
4.
5.
6.
Standard output polarity is negative. If positive output is required, substitute
“P” for “N” in part number.
Measured into an open circuit load (>10k ohm).
VSWR measured at or below -20dBm input power level
Video capacitance is used for RF by pass. This value can be changed if
required for video response time or other considerations.
Contact the factory if value other than those shown is needed.
Standard bias is 100 microamps.
Zero bias schottky versions are available for most of the listed bias schottky
models with only minor differences in specifications.
•
The zero bias schottky has an impedance of several thousand ohms.
•
Zero bias schottky detectors exhibit less sensitive TSS due to the high
diode impedance (typicaly 3dB reduction).
•
The temerature performance of the zero bias schottky is poor when
operating at low input power levels. This difference becomes small at high
levels (above 0 dBm input power). The part number of zero bias versions
includes a “z” following the polarity indicator.
14 | w w w . a e r o f l e x . c o m / a c c | 1 - 7 3 2 - 4 6 0 - 0 2 12
APPLICATIONS
Transmitter Monitoring
Radar Equipment
Missile Guidance Systems
Input to Low-Noise Amplifiers
Broadband Or Narrowband ECM Receivers
Power and Signal Monitors
Doppler Radar and Beacon Receivers
Matched units available for Multi-channel Receivers
Amplitude Comparator Systems and Discriminators
Detectors
Bias Coaxial Schottky Detectors
(with Internal Pads or Resistors)
OUTLINE CASE STYLE C3
OUTLINE CASE STYLE C8
TYPE-N MALE
(INPUT)
SMA MALE
(INPUT)
BNC FEMALE
(OUTPUT)
SMA FEMALE
(OUTPUT)
0.625
0.825
0.312
.29
.43
1.32±.02
(TYPICAL WEIGHT = 9.0g)
2.80±.02
(TYPICAL WEIGHT = 60.8g)
OUTLINE CASE STYLE C15
OUTLINE CASE STYLE C32
2.00
0.420
0.430
1.16±.02
0.500±.010
.312
(7.92MM)
SMA FEMALE
(OUTPUT)
SMA MALE
(INPUT)
BNC FEMALE
(OUTPUT)
SMA MALE
(INPUT)
(TYPICAL WEIGHT = 7.09g)
(TYPICAL WEIGHT = 26.9g)
SCREENING
PART NUMBER ORDERING INFORMATION
Standard Screening:
Internal Visual per MIL-STD-883, Method 2017
Temperature Cycle: -65°C to +100°C, 10 cycles
Optional High-Rel Screening (Ref MIL-PRF-38534):
Internal Visual per MIL-STD-883, Method 2017
Stabilization Bake per MIL-STD-883, Method 1008
Temperature Cycle per MIL-STD-883, Method 1010
Constant Acceleration per MIL-STD-883,
Method 2001
Burn-in per MIL-STD-883, Method 1015
Leak Test per MIL-STD-883, Method 1014
External Visual per MIL-STD-883, Method 2009
Example:
ACSP-2503:
N:
ACSP-2503NZC3V-20
Biased Coaxial Schottky Detector, 4 - 8GHz
Negative output polarity
Z:
Zero bias version (Omit for biased version)
V:
Add Video Protection
20:
20 pF custom output capacitance (Omit for standard
value)
w w w. a e r o f l e x . c o m / a c c
|
1 - 7 3 2 - 4 6 0 - 0 2 12
| 15
Detectors
Bolt Channel Schottky Detectors
Static protection and easy mounting are important features of these high sensitivity
detectors. They offer excellent octave or broadband RF performance and rugged
construction for harsh environments. The static protection virtually eliminates damage
due to handling or from video transients. The Bolt Channel package allows for very simple
and reliable screw-on mounting. The modified package saves additional space by
eliminating one thru hole. The standard output polarity is positive. Negative output
versions are available with slightly lower sensitivity.
Features
• Microstrip or Stripline Compatible
• Static Protection
• High Sensitivity
• Small Size
• Easy Mounting
BOLT CHANNEL SCHOTTKY DETECTORS
Frequency
Range
(MHz)
Part Number
Minimum
Sensitivity
K
(mV/mW)
Flatness
vs
Frequency
(+/-dB)
Typical
VSWR
Nominal
Video
Capacitance
(pF)
Standard
Case
Styles
Optional
Case
Styles
0.95 - 1.25
1 - 1.5
2-6
2 - 12
2 - 18
8 - 18
12 - 18
17 - 18
ACSM-2036P
ACSM-2155P
ACSM-2030P
ACSM-2032P
ACSM-2031P
ACSM-2033P
ACSM-2034P
ACSM-2139P
2000
1700
2000
2000
1700
1700
1800
1700
0.2
0.25
0.3
1.0
1.3
1.0
0.75
0.5
-53
-52
-53
-52
-51
-51
-51
-51
20
75
12
12
12
12
12
9
M51
M51
M51
M51
M51
M51
M51
M51
-
NOTES
EACH DETECTOR MODEL CONTAINS
1.
Input Impedance Matching
DC return
RF bypass capacitor
Detector diode
2.
3.
4.
5.
Available in both negative and positive polarities, substitute “N” or “P” in part
number.
Tangential Signal Sensitivity (TSS) is a measure of low level sensitivity with
respect to noise. It is measured using a video amplifier with a 2MHz
bandwidth and a 3dB noise figure.
Video capacitance is used for RF bypass. This value can be changed if
required for video response time or other considerations. Contact the factory
if value other than those shown are needed.
Video protection is available on most models. This feature helps to prevent
damage to the detector diode from incidents occurring at the video port.
Transient electromagnetic spikes, static contact, or voltage surges can easily
damage a detector diode. A video protection diode will clamp the voltage at
a value less than the detector breakdown voltage. NOTE: Inclusion of this
protection will cause the output voltage to compress and clamp. This occurs
at about +10dBm input to the detector. If operation above +10dBm is
required then the output protection should be modified or excluded. Contact
the factory for assistance.
Zero bias schottky versions are available for most of listed biased schottky
models with only minor differences in specifications.
•
The zero bias schottky has an impedance of several thousand ohms.
•
•
Zero bias schottky detectors exhibit less sensitive TSS due to the high
diode impedance (typically a 3dB reduction).
The temperature performance of the zero bias schottky is poor when
operating at low input power levels. This difference becomes small at high
levels (above 0dBm input power). The part number of zero bias versions
includes a “Z” following the polarity indicator.
16 | w w w . a e r o f l e x . c o m / a c c | 1 - 7 3 2 - 4 6 0 - 0 2 12
APPLICATIONS
Transmitter Monitoring
Radar Equipment
Missile Guidance Systems
Input to Low-Noise Amplifiers
Broadband Or Narrowband ECM Receivers
Power and Signal Monitors
Doppler Radar and Beacon Receivers
Matched units available for Multi-channel Receivers,
Amplitude Comparator Systems and Discriminators
Detectors
Bolt Channel Schottky Detectors
OUTLINE CASE STYLE M51
SCREENING
0.280±.005
0.079±.002
Ø0.096±.003 THRU
(2) PLCS.
0.160
0.080±.001
0.135±.010
(2) PLCS.
DETAIL
NOT TO SCALE
COLORED DOT
INPUT
Standard Screening:
Internal Visual per MIL-STD-883, Method 2017
Temperature Cycle: -65°C to +100°C, 10 cycles
Optional High-Rel Screening (Ref MIL-PRF-38534):
Internal Visual per MIL-STD-883, Method 2017
Stabilization Bake per MIL-STD-883, Method 1008
Temperature Cycle per MIL-STD-883, Method 1010
Constant Acceleration per MIL-STD-883, Method 2001
Burn-in per MIL-STD-883, Method 1015
Maximum Input Power: +20dBm Leak Test per MIL-STD-883,
Method 1014
External Visual per MIL-STD-883, Method 2009
0.205±.003
0.020 MIN
0.004
MIN
0.126±.004
(2) PLCS.
SEE DETAIL
(TYPICAL WEIGHT = 0.54g)
0.062±.002
PART NUMBER ORDERING INFORMATION
Example:
ACSM-2033PZM51V-20
ACSM-2033: Bolt Channel Schottky Detector, 8 -18GHz
P:
Positive output polarity
Z:
Zero bias version (Omit for biased version)
V:
Add Video Protection
20:
20 pF custom output capacitance (Omit for standard
value)
w w w. a e r o f l e x . c o m / a c c
|
1 - 7 3 2 - 4 6 0 - 0 2 12
| 17
Detectors
Schottky Diode Module Detectors
High sensitivity and superior electrical and environmental reliability characterize these
module detectors. They are hermetically sealed and contain internal RF matching, DC
return, and RF bypass capacitor. In addition, the video port can be protected from static
or transient voltages. This feature prevents damage due to handling (usually static) or
system video transients. Models may be chosen for broadband RF performance or for
optimized narrow bands. They may be used in microstrip or stripline applications for
power monitoring, broadband ECM receivers, radar equipment, beacon or multi-channel
receivers.
Features
eatures
• Static Protection
• High Sensitivity
• Small Size
• Environmental specifications are
standard.
SCHOTTKY DIODE MODULE DETECTORS
Frequency
Range
(MHz)
Part Number
Minimum
Sensitivity
K
(mV/mW)
Flatness
vs
Frequency
(+/-dB)
Typical
VSWR
Nominal
Video
Capacitance
(pF)
Standard
Case
Styles
Optional
Case
Styles
0.1 - 1
0.5 - 2
1-2
0.5 - 4
1-4
2-4
1-8
2-8
4-8
2 - 12
8 - 12
1 - 18
2 - 18
8 - 18
12 - 18
ACSM-2035N
ACSM-2001N
ACSM-2066N
ACSM-2108N
ACSM-2038N
ACSM-2002N
ACSM-2075N
ACSM-2014N
ACSM-2003N
ACSM-2007N
ACSM-2004N
ACSM-2047N
ACSM-2006N
ACSM-2015N
ACSM-2005N
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
1800
1800
1800
2000
0.25
0.4
0.2
0.4
0.4
0.4
0.5
0.5
0.4
0.9
0.65
1.0
1.0
0.7
0.6
-52
-53
-53
-53
-53
-53
-53
-53
-53
-52
-52
-51
-51
-52
-52
270
75
20
20
20
20
20
20
20
20
12
20
12
12
12
M12*
M12*
M12*
M12*
M12*
M12*
M12*
M12*
M12*
M12*
M12*
M12*
M12*
M12*
M12*
M17, M47
M17, M47
M17,M47,M51
M17,M43,M51
M17,M51
M17,M51
M17
M17
M17 ,M51
M17
M17
M17
M17
M17
M17
*Application note regarding drop in modules.
NOTES
EACH DETECTOR MODEL CONTAINS
1.
Input Impedance Matching
DC return
RF bypass capacitor
Detector diode
2.
3.
4.
5.
Available in both negative and positive polarities, substitute “N” or “P” in part
number.
Tangential Signal Sensitivity (TSS) is a measure of low level sensitivity with
respect to noise. It is measured using a video amplifier with a 2MHz
bandwidth and a 3dB noise figure.
Video capacitance is used for RF bypass. This value can be changed if
required for video response time or other considerations. Contact the factory
if value other than those shown are needed.
Video protection is available on most models. This feature helps to prevent
damage to the detector diode from incidents occurring at the video port.
Transient electromagnetic spikes, static contact, or voltage surges can easily
damage a detector diode. A video protection diode will clamp the voltage at
a value less than the detector breakdown voltage. NOTE: Inclusion of this
protection will cause the output voltage to compress and clamp. This occurs
at about +10dBm input to the detector. If operation above +10dBm is
required then the output protection should be modified or excluded. Contact
the factory for assistance.
Zero bias schottky versions are available for most of listed biased schottky
models with only minor differences in specifications.
•
The zero bias schottky has an impedance of several thousand ohms.
•
Zero bias schottky detectors exhibit less sensitive TSS due to the high
diode impedance (typically a 3dB reduction).
•
The temperature performance of the zero bias schottky is poor when
operating at low input power levels. This difference becomes small at high
levels (above 0dBm input power). The part number of zero bias versions
includes a “Z” following the polarity indicator.
18 | w w w . a e r o f l e x . c o m / a c c | 1 - 7 3 2 - 4 6 0 - 0 2 12
APPLICATIONS
Transmitter Monitoring
Radar Equipment
Missile Guidance Systems
Input to Low-Noise Amplifiers
Broadband Or Narrowband ECM Receivers
Power and Signal Monitors
Doppler Radar and Beacon Receivers
Matched units available for Multi-channel Receivers,
Amplitude Comparator Systems and Discriminators
Detectors
Schottky Diode Module Detectors
OUTLINE CASE STYLE M17
OUTLINE CASE STYLE M12
0.120
0.080
0.250
0.120
0.330
.266 [6.76]
0.123
.060 [1.52]
.016 [0.40]
0.246
±.003
CL
0.012 TYP.
.276 [7.00]
SQUARE
OUTPUT
INPUT
.070 [1.78] X2
PIN IDENTIFIER
1
.020 [0.50] X2
.034 [0.87] X8
0.129
.010 [0.25] X2
CL
0.065
.039 [1.00] X6
PINOUT MATRIX
PIN
FUNCTION
1
N/C
2
GND
3
RF INPUT
4
GND
5
N/C
6
N/C
7
N/C
8
N/C
9
N/C
10
N/C
GND
11
OUTPUT
12
GND
13
14
N/C
15
N/C
16
N/C
NOTE: FOR BEST ELECTRICAL
PERFORMANCE BASE AND CORNER
TAB MUST BE GROUNDED
ELECTRICAL
AND THERMAL
CU/MO BASE
.079 [2.00] X2
ATTENTION:
THIS IS A TOP VIEW (AS MOUNTED)
(TYPICAL WEIGHT = 0.27g)
(TYPICAL WEIGHT = 1.0g)
OUTLINE CASE STYLE M47
OUTLINE CASE STYLE M43
.400 MAX.
.210
.166 SQ. MAX.
.120
.050
(3) PLCS.
1
8
2
7
3
6
4
5
.120
PIN FUNCTION
.150
.060
MAX.
.250
.430
.080
.015±.003 TYP.
1
2
3
4
5
6
7
8
2X
Ø.015
N/C
RF INPUT
N/C
GROUND
N/C
OUTPUT
N/C
GROUND
.005±.002
Ø.187
.005
MAX
(TYPICAL WEIGHT = 1.09g)
(TYPICAL WEIGHT = 0.18g)
OUTLINE CASE STYLE M51
0.280±.005
0.079±.002
Ø0.096±.003 THRU
(2) PLCS.
0.160
0.080±.001
0.135±.010
(2) PLCS.
DETAIL
NOT TO SCALE
COLORED DOT
INPUT
0.205±.003
0.020 MIN
0.004
MIN
0.126±.004
(2) PLCS.
0.062±.002
SEE DETAIL
(TYPICAL WEIGHT = 0.54g)
SCREENING
PART NUMBER ORDERING INFORMATION
Standard Screening:
Internal Visual per MIL-STD-883, Method 2017
Temperature Cycle: -65°C to +100°C, 10 cycles
Optional High-Rel Screening (Ref MIL-PRF-38534):
Internal Visual per MIL-STD-883, Method 2017
Stabilization Bake per MIL-STD-883, Method 1008
Temperature Cycle per MIL-STD-883, Method 1010
Constant Acceleration per MIL-STD-883, Method 2001
Burn-in per MIL-STD-883, Method 1015
Leak Test per MIL-STD-883, Method 1014
External Visual per MIL-STD-883, Method 2009
Example:
ACSM-2015NZM51X20
ACSM-2015: Schottky Module Detector,
8 -18GHz
N:
Negative output polarity
Z:
Zero bias version (Omit for biased version)
X:
No video protection
20:
20 pF custom output capacitance (Omit for standard
value)
w w w. a e r o f l e x . c o m / a c c
|
1 - 7 3 2 - 4 6 0 - 0 2 12
| 19
Detectors
Maximally Flat Schottky Detectors
These schottky diode detectors are designed for optimum output voltage flatness vs.
input frequency. Excellent flatness performance is maintained up through +15dBm input
power.
Features
Many forms of detectors exhibit uneven expansion and unacceptable flatness at higher
power levels. Our design minimizes this effect making the detectors more useful and
accurate as broadband power monitors
• Broadband Performance
• Exceptional Temperature Stability
• Low Video Resistance (110 typical)
• No Bias Required
ACSP-2154 (1 -18 GHz) MAXIMALLY FLAT SCHOTTKY DETECTOR
Nominal
Output
Voltage
Flatness
vs
Frequency
(+/-dB)
VSWR
Maximum
RF Input
Power
(dBm)
Standard
Case
Styles
Optional
Case
Styles
12mV @ -20dBm
100mV @ -10dBm
500mV @ 0dBm
1V @ +5dBm
0.5dB @ -20dBm
0.7dB @ -10dBm
0.7dB @ 0dBm
1.0dB @ +5dBm
2:1 @ -20dBm
3:1 @ -10dBm
4.5:1 @ 0dBm
+20
M22
C36,C37
EACH DETECTOR MODEL CONTAINS
SCREENING
DC return
RF bypass capacitor
Detector diode
Internal Visual per MIL-STD-883, Method 2017
Temperature Cycle: -65°C to +100°C, 10 cycles
Optional High-Rel Screening (Ref MIL-PRF-38534):
Internal Visual per MIL-STD-883, Method 2017
Stabilization Bake per MIL-STD-883, Method 1008
Temperature Cycle per MIL-STD-883, Method 1010
Constant Acceleration per MIL-STD-883,
Method 2001
Burn-in per MIL-STD-883, Method 1015
Leak Test per MIL-STD-883, Method 1014
External Visual per MIL-STD-883, Method 2009
APPLICATIONS
Transmitter Monitoring
Radar Equipment
Missile Guidance Systems
Input to Low-Noise Amplifiers
Broadband Or Narrowband ECM Receivers
Power and Signal Monitors
Doppler Radar and Beacon Receivers
Matched units available for Multi-channel Receivers, Amplitude
Comparator Systems and Discriminators
20 | w w w . a e r o f l e x . c o m / a c c | 1 - 7 3 2 - 4 6 0 - 0 2 12
PART NUMBER ORDERING INFORMATION
Example:
ACSP-2154:
P:
ACSP-2154PM22
Maximally Flat Schottky Detector, 1 -18GHz
Positive output polarity
M22:
Package
Detectors
Maximally Flat Schottky Detectors
OUTLINE CASE STYLE M22
0.120
0.080
OUTLINE CASE STYLE C36
1.417±.010
0.530
(REF)
0.250
0.120
0.532
0.192
0.140
0.072
0.250
0.246
±.003
0.012 TYP.
0.480
OUTPUT
INPUT
SMA MALE
(INPUT)
0.625
SMA FEMALE
(OUTPUT)
R0.050±0.005 FULL RADIUS
SLOT (2 PLCS.)
0.129
0.059
(TYPICAL WEIGHT =1.55g)
(TYPICAL WEIGHT = 13.0g)
OUTLINE CASE STYLE M17
OUTLINE CASE STYLE C37
.266 [6.76]
.060 [1.52]
1.282±0.010
0.532
(REF)
.016 [0.40]
0.192
0.250
0.140
0.072
BLACK DOT DENOTES
DEVICE INPUT PORT
.276 [7.00]
SQUARE
PIN IDENTIFIER
.070 [1.78] X2
0.480
1
.020 [0.50] X2
.034 [0.87] X8
.010 [0.25] X2
.039 [1.00] X6
SMA FEMALE
(INPUT)
R0.050±0.005 FULL RADIUS
SLOT (2 PLCS.)
0.625
SMA FEMALE
(OUTPUT)
2X 0.375
ELECTRICAL
AND THERMAL
CU/MO BASE
0.122
.079 [2.00] X2
(TYPICAL WEIGHT = 13.0g)
ATTENTION:
THIS IS A TOP VIEW (AS MOUNTED)
(TYPICAL WEIGHT = 0.18g)
PINOUT MATRIX
PIN
1
2
3
4
5
6
7
8
FUNCTION
N/C
GND
RF INPUT
GND
N/C
N/C
N/C
N/C
PIN
9
10
11
12
13
14
15
16
FUNCTION
N/C
N/C
GND
OUTPUT
GND
N/C
N/C
N/C
NOTE: FOR BEST ELECTRICAL PERFORMANCE BASE AND CORNER TAB MUST BE
GROUNDED
w w w. a e r o f l e x . c o m / a c c
|
1 - 7 3 2 - 4 6 0 - 0 2 12
| 21
Detectors
Padded Zero Bias Schottky Detectors
Detectors with internal attenuators are often requested. They are typically used in
circuits where an improved RF match is needed or where the power levels applied are
higher than is typical for low level detectors. Frequently, they are used in laboratory
applications with associated instruments such as broadband power leveling or monitoring.
These detectors are all zero bias, making them convenient to use.
Features
• Superior Flatness vs. Frequency
• Wide Frequency Range
• Improved Return Loss
• Higher Power Handling
PADDED ZERO BIAS SCHOTTKY DETECTORS
Frequency
Range
(GHz)
Part
Number
Flatness
vs
Frequency
(+/-dB)
TSS
(dBm)
Internal
Attenuation
(dB)
Low
Level
Sensitivity
(mV/mW)
2-4
0.01 - 8
7.9 - 8.4
7.9 - 8.4
0.01 - 12.4
0.01 - 18
0.01 - 18
5 - 18
0.01 - 20
0.01 - 20
ACSP-2579NZ
ACSP-2539NZ
ACSP-2518NZ
ACSP-2519NZ
ACSP-2663NZ
ACSP-2544NZ
ACSP-2551NZ
ACSP-2521NZ
ACSP-2643NZ
ACSP-2644NZ
0.2
0.5
0.1
0.1
0.5/octave
0.5/octave
0.5/octave
0.5/octave
0.5/octave
1.0
-45
-45
-45
-48
-45
-45
-44
-44
-46
-44
6
6
6
3
6
6
7
6
3
7
500
500
500
1000
500
500
400
500
1000
500
Standard
Case
Styles
Optional
Case
Styles
C3
C3
C3
C3
C3
C3
C3
C3
C3
C3
C8,C15
C8,C15,C32
C8,C15,C32
C8,C15,C32
C8,C15,C32
C15,C32
C15,C32
C15,C32
C15,C32
C15,C32
NOTES
EACH DETECTOR MODEL CONTAINS
1.
DC return
RF bypass capacitor
Detector diode
2.
3.
Available in both negative and positive polarities, substitute “N” or “P” in part
number.
Measured into an open circuit load ( >10k ohm).
Video protection is available on most models. This feature helps to prevent
damage to the detector diode from incidents occurring at the video port.
Transient electromagnetic spikes, static contact, or voltage surges can easily
damage a detector diode. A video protection diode will clamp the voltage at
a value less than the detector breakdown voltage. NOTE: Inclusion of this
protection will cause the output voltage to compress and clamp. This occurs
at about +10dBm input to the detector. If operation above +10dBm is
required then the output protection should be modified or excluded. Contact
the factory for assistance.
22 | w w w . a e r o f l e x . c o m / a c c | 1 - 7 3 2 - 4 6 0 - 0 2 12
APPLICATIONS
Transmitter Monitoring
Missile Guidance Systems
Input to Low-Noise Amplifiers
Broadband Or Narrowband ECM Receivers
Power and Signal Monitors
Doppler Radar and Beacon Receivers
Matched units available for Multi-channel Receivers,
Amplitude Comparator Systems and Discriminators
Laboratory Test Equipment
Detectors
Padded Zero Bias Schottky Detectors
OUTLINE CASE STYLE C3
OUTLINE CASE STYLE C8
SMA MALE
(INPUT)
TYPE-N MALE
(INPUT)
SMA FEMALE
(OUTPUT)
BNC FEMALE
(OUTPUT)
0.312
0.625
0.825
.29
.43
1.32±.02
(TYPICAL WEIGHT = 9.0g)
2.80±.02
(TYPICAL WEIGHT = 60.8g)
OUTLINE CASE STYLE C15
OUTLINE CASE STYLE C32
2.00
0.420
1.16±.02
0.430
.312
(7.92MM)
0.500±.010
SMA FEMALE
(OUTPUT)
SMA MALE
(INPUT)
(TYPICAL WEIGHT = 7.09g)
BNC FEMALE
(OUTPUT)
SMA MALE
(INPUT)
(TYPICAL WEIGHT = 26.9g)
SCREENING
PART NUMBER ORDERING INFORMATION
Standard Screening:
Internal Visual per MIL-STD-883, Method 2017
Temperature Cycle: -65°C to +100°C, 10 cycles
Optional High-Rel Screening (Ref MIL-PRF-38534):
Internal Visual per MIL-STD-883, Method 2017
Stabilization Bake per MIL-STD-883, Method 1008
Temperature Cycle per MIL-STD-883, Method 1010
Constant Acceleration per MIL-STD-883, Method 2001
Burn-in per MIL-STD-883, Method 1015
Leak Test per MIL-STD-883, Method 1014
External Visual per MIL-STD-883, Method 2009
Example:
ACSP-2663:
N:
ACSP-2663NZC3
Bolt Channel Schottky Detector, 8 -18GHz
Negative output polarity
Z:
Zero bias version (Omit for biased version)
C3:
Package
w w w. a e r o f l e x . c o m / a c c
|
1 - 7 3 2 - 4 6 0 - 0 2 12
| 23
Detectors
Coaxial Tunnel Diode Detectors
Superior performance and high reliability are designed into these detectors. They offer
extremely stable output voltage over wide temperature excursions, typically ±0.15dB from
-65°C to +100°C at 1GHz and approx. ±0.3dB at 18GHz. No bias is required for
operation. Designs are available, in selected frequency bands, from 100MHz (or lower)
to 18GHz. Typical output impedance is in the range of 95 to 125. This allows for fast
pulsed video response and use in wide bandwidth requirements. Video bandwidths may
be modified by selection of the RF bypass capacitor and load value. Square law typically
ranges from TSS up to -17dBm. The upper limit can be raised as high as -13dBm with
selected load values. The output polarity is usually negative but can be made positive if
requested.
Features
• Exceptional Temperature Stability
• Low Video Resistance (112 typical)
• Flat Output vs. Frequency Over
Broadband Performance
• Very Fast Pulse Response
• No Bias Required
• Flexible Design Options
• Environmental specifications are
standard.
COAXIAL TUNNEL DIODE DETECTORS
Frequency
Range
(GHz)
Part
Number
Minimum
Sensitivity
K
(mV/mW)
Flatness
vs
Frequency
(+/-dB)
Typical
TSS
(dBm)
Typical
VSWR
0.1 - 0.5
0.1 - 1
0.5 - 1
0.1 - 2
0.5 - 2
1-2
0.1 - 4
2-4
2-6
1 - 12
2-8
4-8
4-8
6 - 12
8 - 12
2 - 18
0.5 - 18
1 - 18
6 - 18
7 - 18
8 - 18
12 - 18
ACTP-1523N
ACTP-1572N
ACTP-1524N
ACTP-1629N
ACTP-1501N
ACTP-1525N
ACTP-1573N
ACTP-1502N
ACTP-1514N
ACTP-1663N
ACTP-1555N
ACTP-1503N
ACTP-1648N
ACTP-1583N
ACTP-1504N
ACTP-1528N
ACTP-1584N
ACTP-1625N
ACTP-1563N
ACTP-1662N
ACTP-1506N
ACTP-1505N
800
900
800
900
800
800
800
800
800
700
750
750
650
750
700
650
600
650
600
650
650
700
0.3
0.4
0.2
0.35
0.35
0.25
0.3
0.2
0.5
0.85
0.5
0.4
0.4
0.4
0.4
1.0
1.3
1.1
0.9
1.0
0.7
0.4
-51
-51
-51
-51
-51
-51
-51
-51
-51
-50
-51
-51
-50
-50
-50
-50
-50
-50
-50
-50
-50
-51
2.5:1
2.5:1
2.5:1
2.3:1
2.3:1
2.5:1
2.3:1
2.3:1
2.3:1
2.5:1
2.5:1
2.5:1
2.0:1
2.5:1
2.4:1
2.8:1
3.0:1
2.7:1
2.8:1
2.7:1
2.3:1
2.1:1
Nominal
Video
Capacitance
(pF)
Standard
Case
Styles
Optional
Case
Styles
270
270
39
75
39
20
75
20
20
20
20
9
12
12
9
12
20
20
12
12
12
9
C3
C3
C3
C3
C3
C3
C3
C3
C3
C3
C3
C3
C3
C3
C3
C3
C3
C3
C3
C3
C3
C3
C8,C15,C62
C8,C15,C62
C8,C15
C8,C15,C62
C15
C15
C8,C15,C62
C15
C32,C5,C15
C8,C15,C62
C8,C15
C32
C8, 15
C8,C15
C32
C32,C15
C32,C15
C32,C15
C32
-
NOTES
APPLICATIONS
1.
Transmitter Monitoring
Missile Guidance Systems
Input to Low-Noise Amplifiers
Broadband Or Narrowband ECM Receivers
Power and Signal Monitors
Doppler Radar and Beacon Receivers
Matched units available for Multi-channel Receivers,
Amplitude Comparator Systems and Discriminators
2.
3.
4.
5.
Available in both negative and positive polarities, substitute “N” or “P” in part
number.
Diode values can be changed to alter the level of sensitivity. As sensitivity is
increased, VSWR will degrade. VSWR will improve as sensitivity is lowered.
Flatness and TSS will also be influenced by these changes. If your
applications require something special, please contact the factory.
Tangential Signal Sensitivity (TSS) is a measure of low level sensitivity with
respect to noise. It is measured using a video amplifier with a 2MHz
bandwidth and a 3dB noise figure.
VSWR measured at or below -20dBm input power level.
Video capacitance is used for RF bypass. This value can be changed if
required for video response time or other considerations. Contact the factory
if value other than those shown are needed.
24 | w w w . a e r o f l e x . c o m / a c c | 1 - 7 3 2 - 4 6 0 - 0 2 12
Detectors
Coaxial Tunnel Diode Detectors
OUTLINE CASE STYLE C3
OUTLINE CASE STYLE C8
TYPE-N MALE
(INPUT)
SMA MALE
(INPUT)
BNC FEMALE
(OUTPUT)
SMA FEMALE
(OUTPUT)
0.625
0.825
0.312
.29
.43
1.32±.02
(TYPICAL WEIGHT = 9.0g)
2.80±.02
(TYPICAL WEIGHT = 60.8g)
OUTLINE CASE STYLE C15
OUTLINE CASE STYLE C32
2.00
1.16±.02
0.420
0.430
.312
(7.92MM)
0.500±.010
BNC FEMALE
(OUTPUT)
SMA MALE
(INPUT)
SMA FEMALE
(OUTPUT)
SMA MALE
(INPUT)
(TYPICAL WEIGHT = 7.09g)
(TYPICAL WEIGHT = 26.9g)
OUTLINE CASE STYLE C62
1.22±.050
.312
SMA FEMALE
INPUT
SMA FEMALE
OUTPUT
(TYPICAL WEIGHT = 8.0g)
SCREENING
PART NUMBER ORDERING INFORMATION
Standard Screening:
Internal Visual per MIL-STD-883, Method 2017
Temperature Cycle: -65°C to +100°C, 10 cycles
Optional High-Rel Screening (Ref MIL-PRF-38534):
Internal Visual per MIL-STD-883, Method 2017
Stabilization Bake per MIL-STD-883, Method 1008
Temperature Cycle per MIL-STD-883, Method 1010
Constant Acceleration per MIL-STD-883, Method 2001
Burn-in per MIL-STD-883, Method 1015
External Visual per MIL-STD-883, Method 2009
Example:
ACTP-1555:
ACTP-1555NC3-12
Coaxial Tunnel Diode Detector, 2 -8GHz
N:
Negative output polarity
C3:
Package
12:
12pF custom video capacitance
(Omit for standard value)
w w w. a e r o f l e x . c o m / a c c
|
1 - 7 3 2 - 4 6 0 - 0 2 12
| 25
Detectors
Tunnel Diode Detectors
The detectors listed are standard products. There are many possible variations, which
can be selected as options. Package configurations can be changed if desired.
Performance characteristics may be modified to meet special requirements (e.g. the
sensitivity might be moved higher or lower with a corresponding effect on VSWR). RF
bypass capacitance values can be selected on some models. Contact the factory for
special needs.
Features
• Exceptional Temperature Stability
• Low Video Resistance (112 typical)
• Flat Output vs. Frequency Over
Broadband Performance
• Very Fast Pulse Response
• No Bias Required
• Flexible Design Options
TUNNEL DIODE DETECTORS
Frequency
Range
(GHz)
Part
Number
Minimum
Sensitivity
K
(mV/mW)
Flatness
vs
Frequency
(+/-dB)
Typical
TSS
(dBm)
Typical
VSWR
0.005 - 0.5
0.05 - 0.5
0.01 - 0.75
0.1 - 1
0.01 - 2
0.1 - 2
0.5 - 2
1-2
0.1 - 4
0.5 - 4
2-4
0.1 - 6
2-6
2-8
4-8
8 - 12
0.5 - 18
2 - 18
6 - 18
8 - 18
1 - 20
ACTM-1078N
ACTM-1155N
ACTM-1080N
ACTM-1037N
ACTM-1069N
ACTM-1071N
ACTM-1001N
ACTM-1013N
ACTM-1073N
ACTM-1054N
ACTM-1002N
ACTM-1017N
ACTM-1006N
ACTM-1007N
ACTM-1003N
ACTM-1012N
ACTM-1020N
ACTM-1009N
ACTM-1058N
ACTM-1066N
ACTM-1144N
800
700
800
900
400
900
900
850
800
800
850
700
900
750
800
650
600
650
700
700
600
0.2
0.3
0.3
0.2
0.3
0.2
0.25
0.2
0.25
0.35
0.35
0.35
0.4
0.5
0.35
0.4
1.25
1.0
1.0
0.9
1.3
-50
-49
-50
-51
-49
-51
-51
-51
-50
-51
-51
-50
-51
-50
-51
-50
-49
-50
-49
-49
-49
2.2:1
2.2:1
2.4:1
2.3:1
1.5:1
2.0:1
2.5:1
1.9:1
2.0:1
2.0:1
2.0:1
2.2:1
2.5:1
2.5:1
1.9:1
2.0:1
3.3:1
3.0:1
2.5:1
2.5:1
3.0:1
Nominal
Standard
Video
Case
Capacitance Styles
(pF)
Optional
Case
Styles
1000
470
1000
270
1000
75
75
20
75
39
39
75
20
20
20
12
20
20
9
9
20
M35
M35
M35
M34
M35
M35
M34,M47
M34,M35,M47,M51
—
M34,M35,M47,M51
M34,M35,M47,M51
—
M51
M51
M51
M51
—
—
M51
—
M51
M12*
M12*
M12*
M12*
M12*
M12*
M12*
M12*
M12*
M12*
M12*
M12*
M12*
M12*
M12*
M12*
M12*
M12*
M12*
M12*
M12*
*Application note regarding drop in modules.
NOTES
APPLICATIONS
1.
Transmitter Monitoring
Missile Guidance Systems
Input to Low-Noise Amplifiers
Broadband Or Narrowband ECM Receivers
Power and Signal Monitors
Doppler Radar and Beacon Receivers
2.
3.
4.
5.
Available in both negative and positive polarities, substitute “N” or “P” in part
number.
Diode values can be changed to alter the level of sensitivity. As sensitivity is
increased, VSWR will degrade. VSWR will improve as sensitivity is lowered.
Flatness and TSS will also be influenced by these changes. If your applications
require something special, please contact the factory.
Tangential Signal Sensitivity (TSS) is a measure of low level sensitivity with
respect to noise. It is measured using a video amplifier with a 2MHz
bandwidth and a 3dB noise figure.
VSWR measured at or below -20dBm input power level.
Video capacitance is used for RF bypass. This value can be changed if
required for video response time or other considerations. Contact the factory
if value other than those shown are needed.
26 | w w w . a e r o f l e x . c o m / a c c | 1 - 7 3 2 - 4 6 0 - 0 2 12
Matched units available for Multi-channel Receivers,
Amplitude Comparator Systems and Discriminators
Detectors
Tunnel Diode Detectors
OUTLINE CASE STYLE M12
0.120
0.080
OUTLINE CASE STYLE M17
0.250
0.120
0.330
.266 [6.76]
.060 [1.52]
0.123
0.246
±.003
CL
0.012 TYP.
.016 [0.40]
.276 [7.00]
SQUARE
OUTPUT
INPUT
PIN IDENTIFIER
.070 [1.78] X2
1
.020 [0.50] X2
.034 [0.87] X8
0.129
.010 [0.25] X2
CL
0.065
.039 [1.00] X6
PINOUT MATRIX
PIN
FUNCTION
1
N/C
2
GND
3
RF INPUT
4
GND
5
N/C
6
N/C
7
N/C
8
N/C
9
N/C
10
N/C
GND
11
OUTPUT
12
GND
13
14
N/C
15
N/C
16
N/C
NOTE: FOR BEST ELECTRICAL
PERFORMANCE BASE AND CORNER
TAB MUST BE GROUNDED
ELECTRICAL
AND THERMAL
CU/MO BASE
.079 [2.00] X2
(TYPICAL WEIGHT = 1.0g)
ATTENTION:
THIS IS A TOP VIEW (AS MOUNTED)
(TYPICAL WEIGHT = 0.27g)
OUTLINE CASE STYLE M47
OUTLINE CASE STYLE M51
.400 MAX.
.210
.166 SQ. MAX.
0.280±.005
0.079±.002
.015±.003 TYP.
.050
(3) PLCS.
1
8
2
7
6
4
5
0.160
PIN FUNCTION
.150
3
Ø0.096±.003 THRU
(2) PLCS.
1
2
3
4
5
6
7
8
N/C
RF INPUT
N/C
GROUND
N/C
OUTPUT
N/C
GROUND
0.080±.001
0.135±.010
(2) PLCS.
DETAIL
NOT TO SCALE
COLORED DOT
INPUT
0.205±.003
0.020 MIN
.060
MAX.
0.004
MIN
.005±.002
0.126±.004
(2) PLCS.
0.062±.002
SEE DETAIL
.005
MAX
(TYPICAL WEIGHT = 0.54g)
(TYPICAL WEIGHT = 0.18g)
SCREENING
Standard Screening:
Internal Visual per MIL-STD-883, Method 2017
Temperature Cycle: -65°C to +100°C, 10 cycles
Optional High-Rel Screening (Ref MIL-PRF-38534):
Internal Visual per MIL-STD-883, Method 2017
Stabilization Bake per MIL-STD-883, Method 1008
Temperature Cycle per MIL-STD-883, Method 1010
Constant Acceleration per MIL-STD-883, Method 2001
Burn-in per MIL-STD-883, Method 1015
External Visual per MIL-STD-883, Method 2009
PART NUMBER ORDERING
INFORMATION
Example:
ACTP-1002:
ACTM-1002NM12-20
Coaxial Tunnel Diode Module, 2 -4GHz
N:
Negative output polarity
M12:
Package
20:
20pF custom video capacitance
(Omit for standard value)
w w w. a e r o f l e x . c o m / a c c
|
1 - 7 3 2 - 4 6 0 - 0 2 12
| 27
Detectors
High Frequency Tunnel Detectors
Exceptional thermal stability and flatness vs. frequency characterize these tunnel
detectors from Aeroflex Control Components, Inc. Several models are available which
operate over all or a portion of the frequency range of 18 to 40 GHz. The temperature
stability is +/- 0.3dB over the range of -65°C to +100°C. The typical output impedance
is 115. This allows for extremely fast video response when operating in the square law
range, typically -20dBm or lower. The input power rating is +14dBm maximum.
Features
• Exceptional Temperature Stability
• Low Video Resistance (115 typical)
• Broadband Performance
• No Bias Required
HIGH FREQUENCY TUNNEL DETECTORS
Frequency
Range
(GHz)
18
18
26
36
18
-
26
30
36
39
40
Part
Number
Flatness
vs
Frequency
(+/-dB)
Minimum
Output
Voltage
(mV)
Standard
Case
Styles
Optional
Case
Styles
ACTP-1799N
ACTP-1796N
ACTP-1798N
ACTP-1797N
ACTP-1795N
0.5
0.5
1
0.4
1
4
4
4
4
4
C36
C7
C7
C7
C7
C37,M61
C63,M61
C63,M61
C63M61
C63,M61
SCREENING
EACH DETECTOR MODEL CONTAINS
Standard Screening:
Internal Visual per MIL-STD-883, Method 2017
Temperature Cycle: -65°C to +100°C, 10 cycles
Optional High-Rel Screening (Ref MIL-PRF-38534):
Internal Visual per MIL-STD-883, Method 2017
Stabilization Bake per MIL-STD-883, Method 1008
Temperature Cycle per MIL-STD-883, Method 1010
Constant Acceleration per MIL-STD-883, Method 2001
Burn-in per MIL-STD-883, Method 1015
External Visual per MIL-STD-883, Method 2009
DC return
RF bypass capacitor
Detector diode
28 | w w w . a e r o f l e x . c o m / a c c | 1 - 7 3 2 - 4 6 0 - 0 2 12
APPLICATIONS
Transmitter Monitoring
Missile Guidance Systems
Input to Low-Noise Amplifiers
Broadband Or Narrowband ECM Receivers
Power and Signal Monitors
Doppler Radar and Beacon Receivers
Matched units available for Multi-channel Receivers,
Amplitude Comparator Systems and Discriminators
Detectors
High Frequency Tunnel Detectors
OUTLINE CASE STYLE C7
OUTLINE CASE STYLE C36
1.417±.010
0.530
(REF)
1.410
0.192
0.530
K MALE
R.F. INPUT
0.192
0.140
0.072
0.250
0.250
0.140
SMA FEMALE
VIDEO OUTPUT
0.480
0.481
SMA MALE
(INPUT)
0.625
SMA FEMALE
(OUTPUT)
R0.050±0.005 FULL RADIUS
SLOT (2 PLCS.)
R0.050±0.005 FULL RADIUS
SLOT (2 PLCS.)
(TYPICAL WEIGHT = 14.27)
(TYPICAL WEIGHT = 13.0g)
OUTLINE CASE STYLE C37
OUTLINE CASE STYLE C63
1.282±0.010
0.532
(REF)
0.192
1.282±0.010
0.532
(REF)
0.250
0.140
0.072
0.192
BLACK DOT DENOTES
DEVICE INPUT PORT
0.250
0.140
0.072
BLACK DOT DENOTES
DEVICE INPUT PORT
0.480
SMA FEMALE
(INPUT)
R0.050±0.005 FULL RADIUS
SLOT (2 PLCS.)
0.625
0.480
SMA FEMALE
(OUTPUT)
K FEMALE
(INPUT)
R0.050±0.005 FULL RADIUS
SLOT (2 PLCS.)
2X 0.375
0.625
SMA FEMALE
(VIDEO OUTPUT)
0.122
(TYPICAL WEIGHT = 13.0g)
(TYPICAL WEIGHT = 13.5g)
OUTLINE CASE STYLE M61
0.050
0.035
0.532
0.110
0.090
0.246
±.003
0.012 TYP.
OUTPUT
INPUT
0.129
(TYPICAL WEIGHT = 0.81g)
PART NUMBER ORDERING
INFORMATION
Example:
ACTP-1795:
ACTP-1795NC7
High Frequency Tunnel Diode Detector, 18 -40GHz
N:
Negative output polarity
C7:
Package
w w w. a e r o f l e x . c o m / a c c
|
1 - 7 3 2 - 4 6 0 - 0 2 12
| 29
Detectors
Surface Mount Detectors
Aeroflex Control Components offers a series of tunnel detectors built in surface mount
modules. These modules include complete detector circuits with DC returns and RF
bypass capacitors. Options include input pads or limiters to modify the operational range
or offer input protection. The small size of surface mount packages allows for easier
design and lower cost. They offer high reliability and are hermetically sealed, making
them ideal for operation in harsh environments. Thermal stability is one of the prime
advantages of tunnel diode detectors. Frequencies range from 10MHz to 4GHz. The
output will not vary more than +/-0.15dB over the temperature range of -65°C to +100°C
at these low frequencies. They have high sensitivity without any bias needed for
operation. Standard output polarity is negative, but positive polarity output is an option.
Features
• Thermal Stability
• Small Size
• No Bias Required
• Low Video Impedance
SURFACE MOUNT DETECTORS
Frequency
Range
(GHz)
Part
Number
Minimum
Sensitivity
K
(mV/mW)
Flatness
vs
Frequency
(+/-dB)
Typical
VSWR
Standard
Video
Capacitance
(pF)
0.01 - 0.5
0.25 - 0.75
0.5 - 1
0.5 - 2
1-2
0.1 - 4
2-4
ACTM-1114N
ACTM-1133N
ACTM-1146N
ACTM-1136N
ACTM-1137N
ACTM-1129N
ACTM-1130N
800
900
1000
1000
1000
900
900
0.3
0.2
0.2
0.2
0.2
0.4
0.3
2.3:1
2.3:1
2.3:1
2.3:1
2.3:1
2.3:1
2.3:1
270
270
270
75
75
270
12
Standard
Case
Styles
Optional
Case
Styles
M47
M47
M47
M47
M47
M47
M47
M10,
M10,
M10,
M10,
M10,
M10,
M10,
M17
M17
M17
M17
M17
M17
M17
NOTES
APPLICATIONS
1.
Transmitter Monitoring
Missile Guidance Systems
Input to Low-Noise Amplifiers
Broadband Or Narrowband ECM Receivers
Power and Signal Monitors
Doppler Radar and Beacon Receivers
Matched units available for Multi-channel Receivers,
Amplitude Comparator Systems and Discriminators
2.
3.
4.
Available in both negative and positive polarities, substitute “N” or “P” in part
number.
Diode values can be changed to alter the level of sensitivity. As sensitivity is
increased, VSWR will degrade. VSWR will improve as sensitivity is lowered.
Flatness and TSS will also be influenced by these changes. If your applications
require something special, please contact the factory.
VSWR measured at or below -20dBm input power level.
Video capacitance is used for RF bypass. This value can be changed if
required for video response time or other considerations. Contact the factory
if value other than those shown are needed.
30 | w w w . a e r o f l e x . c o m / a c c | 1 - 7 3 2 - 4 6 0 - 0 2 12
Detectors
Surface Mount Detectors
OUTLINE CASE STYLE M10
OUTLINE CASE STYLE M47
.400 MAX.
.210
.166 SQ. MAX.
.440
(REF)
.320
.270 SQ. MAX.
.035
.015±.003 TYP.
.015±.002
(TYP.)
R.016
(4) PLCS.
1
10
2
9
3
8
4
7
5
6
.050
(3) PLCS.
.050 TYP
.200
1
8
2
7
3
6
4
5
PIN FUNCTION
.150
PIN
1
2
3
4
5
10
9
8
7
6
.045
.085
.005
.080
MAX.
CONNECTION
N/C
INPUT
N/C
N/C
GND
GND
N/C
N/C
OUTPUT
N/C
1
2
3
4
5
6
7
8
.060
MAX.
(TYPICAL WEIGHT = 0.27g)
N/C
RF INPUT
N/C
GROUND
N/C
OUTPUT
N/C
GROUND
.005±.002
.005
MAX
(TYPICAL WEIGHT = 0.18g)
OUTLINE CASE STYLE M17
.266 [6.76]
.060 [1.52]
.016 [0.40]
.276 [7.00]
SQUARE
.070 [1.78] X2
PIN IDENTIFIER
1
.020 [0.50] X2
.034 [0.87] X8
.010 [0.25] X2
.039 [1.00] X6
PINOUT MATRIX
PIN
FUNCTION
1
N/C
2
GND
3
RF INPUT
4
GND
5
N/C
6
N/C
7
N/C
8
N/C
9
N/C
10
N/C
GND
11
OUTPUT
12
GND
13
14
N/C
15
N/C
16
N/C
NOTE: FOR BEST ELECTRICAL
PERFORMANCE BASE AND CORNER
TAB MUST BE GROUNDED
ELECTRICAL
AND THERMAL
CU/MO BASE
.079 [2.00] X2
ATTENTION:
THIS IS A TOP VIEW (AS MOUNTED)
(TYPICAL WEIGHT = 0.27g)
SCREENING
Standard Screening:
Internal Visual per MIL-STD-883, Method 2017
Temperature Cycle: -65°C to +100°C, 10 cycles
Optional High-Rel Screening (Ref MIL-PRF-38534):
Internal Visual per MIL-STD-883, Method 2017
Stabilization Bake per MIL-STD-883, Method 1008
Temperature Cycle per MIL-STD-883, Method 1010
Constant Acceleration per MIL-STD-883, Method 2001
Burn-in per MIL-STD-883, Method 1015
Leak Test per MIL-STD-883, Method 1014
External Visual per MIL-STD-883, Method 2009
PART NUMBER ORDERING
INFORMATION
Example:
ACTM-1130:
ACTM-1130NM47-20
Surface Mount Tunnel Detector, 2 -4GHz
N:
Negative output polarity
M47:
Package
20:
20pF custom video capactiance
(Omit for standard value)
w w w. a e r o f l e x . c o m / a c c
|
1 - 7 3 2 - 4 6 0 - 0 2 12
| 31
Switches
Single-Pole, Single-Throw Switches
The S1 series of single pole, single throw PIN diode switches span the frequency range
of 10MHz to 18GHz and are available with absorptive or reflective inputs. The switches
are available in a wide variety of standard frequency ranges from cost-effective
narrowband to high-performance broadband. Each switch incorporates a TTL-compatible
driver for convenient system integration and operates from +5V and -12V to -18V DC
power supplies. All switches incorporate DC blocks at the RF ports. Standard screened
switches incorporate epoxy sealed lids and undergo a stringent yet cost effective
screening cycle. The switches are also available with hermetic seal and high-rel screening
for military and aerospace applications.
REFLECTIVE SWITCHES
Applications
ations
• EW Systems
• Test Equipment
• Electronic Simulators
• Communications Systems
• Modulators
ABSORPTIVE SWITCHES
Frequency
Range (GHz)
Part
Number
Insertion Loss
(dB max)
VSWR
(max)
Isolation
(dB min)
Part
Number
Insertion Loss
(dB max)
VSWR
(max)
Isolation
(dB min)
Switching Speed
(nsec max)
MAX RF
(W CW)
0.01 – 0.1
0.01 – 0.5
0.01 – 1
0.01 – 2
0.01 – 4
0.01 - 6
0.1 – 0.5
0.1 – 1
0.1 – 2
0.1 – 4
0.1 – 8
0.1 – 10
0.5 – 1
0.5 – 2
0.5 – 4
0.5 – 6
0.5 – 12
0.5 – 18
1–2
1–4
1–8
1 – 10
1 – 12
1 – 14
1 – 18
2–4
2–6
2–8
2 – 10
2 – 12
2 – 16
2 – 18
4–8
4 – 10
4 – 12
4 – 16
4 – 18
6 – 10
6 – 12
6 – 18
8 – 10
8 – 12
8 – 18
10 – 18
12 – 18
S1H1R
S1H2R
S1H3R
S1H4R
S1H5R
S1H6R
S1V1R
S1V2R
S1V3R
S1V4R
S1V5R
S1V6R
S1U1R
S1U2R
S1U3R
S1U4R
S1U5R
S1U6R
S1L1R
S1L2R
S1L3R
S1L4R
S1L5R
S1L6R
S1L7R
S1S1R
S1S2R
S1S3R
S1S4R
S1S5R
S1S6R
S1S7R
S1C1R
S1C2R
S1C3R
S1C4R
S1C5R
S1C6R
S1C7R
S1C8R
S1X1R
S1X2R
S1X3R
S1K1R
S1K2R
0.8
0.9
1.2
1.8
2.5
2.7
0.9
1.2
1.8
2.5
3.2
3.5
1.0
1.4
2.0
2.2
2.5
2.8
0.8
1.1
1.8
1.9
2.0
2.2
2.7
1.0
1.3
1.7
1.8
2.0
2.5
2.7
1.1
1.2
1.5
1.9
2.0
1.2
1.5
2.0
1.2
1.5
2.0
2.0
2.0
1.5
1.5
1.5
1.6
1.8
1.9
1.5
1.5
1.6
1.8
2.0
2.0
1.5
1.6
1.8
1.9
2.0
2.0
1.5
1.6
1.8
2.0
2.0
2.0
2.0
1.6
1.7
1.8
1.8
1.9
2.0
2.0
1.6
1.7
1.8
2.0
2.0
1.7
1.8
2.0
1.7
1.8
2.0
2.0
2.0
75
75
75
75
75
75
80
80
80
75
70
70
80
80
75
70
65
60
80
80
75
70
65
65
60
70
70
70
70
65
60
60
70
70
65
60
60
70
65
60
70
65
60
60
60
S1H1
S1H2
S1H3
S1H4
S1H5
S1H6
S1V1
S1V2
S1V3
S1V4
S1V5
S1V6
S1U1
S1U2
S1U3
S1U4
S1U5
S1U6
S1L1
S1L2
S1L3
S1L4
S1L5
S1L6
S1L7
S1S1
S1S2
S1S3
S1S4
S1S5
S1S6
S1S7
S1C1
S1C2
S1C3
S1C4
S1C5
S1C6
S1C7
S1C8
S1X1
S1X2
S1X3
S1K1
S1K2
0.9
1.0
1.3
1.9
2.6
2.8
1.0
1.3
1.9
2.8
3.3
3.6
1.1
1.5
2.1
2.3
2.7
3.0
0.9
1.2
1.9
2.0
2.2
2.4
3.0
1.1
1.4
1.8
2.0
2.2
2.7
3.0
1.8
2.0
2.2
2.7
2.8
2.0
2.2
2.8
1.9
2.2
2.8
2.8
2.8
1.5
1.5
1.5
1.6
1.8
1.9
1.5
1.5
1.6
1.8
2.0
2.0
1.5
1.6
1.8
2.0
2.0
1.9
1.5
1.6
1.8
2.0
2.0
2.0
2.0
1.6
1.7
1.8
1.8
1.9
2.0
2.0
1.6
1.7
1.8
2.0
2.0
1.7
1.8
2.0
1.7
1.8
2.0
2.0
2.0
80
80
80
80
80
80
80
80
80
80
75
75
80
80
80
75
70
65
85
85
80
75
70
70
65
75
75
75
70
70
65
65
75
70
70
65
65
70
70
65
70
70
65
65
65
250
250
250
250
250
250
250
250
250
250
250
250
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0.5
0.5
1
1
1
1
0.5
0.5
0.5
1
1
1
1
0.5
0.5
0.5
1
1
0.5
0.5
0.5
1
0.5
0.5
0.5
0.5
0.5
0.5
0.5
32 | w w w . a e r o f l e x . c o m / a c c | 1 - 7 3 2 - 4 6 0 - 0 2 12
Switches
Single-Pole, Single-Throw Switches
NOTES
PART NUMBER ORDERING INFORMATION
DC Bias
(Standard)
DC Bias
(-5 option)
DC Bias
(-12 option)
Control
Add
Add
Add
Add
Add
Add
Add
Add
+5V ±0.5V @ 50mA max
-15V ±3V @ 50mA max
+5V ±0.5V @ 60mA max
-5V ±0.5V @ 60mA max
+15V ±3V @ 50mA max
-15V ±3V @ 50mA max
TTL 0 = Low Loss
TTL 1 = Isolation
Absorptive switch
50 ohm terminations at both RF ports
(in isolation mode)
Switching speed is defined as 50%TTL to 90% (t-on) and 50%TTL to
10%RF (t-off)
“-RC” suffix
“-H” suffix
“-5” suffix
“-5-RC” suffix
“-5-H” suffix
“-12” suffix
“-12-RC” suffix
“-12-H” suffix
RoHS-compliant
Hermetic seal
±5V DC supplies
±5V DC supplies, RoHS-compliant
±5V DC supplies, Hermetic seal
±12V to 18V DC supplies
±12V to 18V DC supplies, RoHS-compliant
±12V to 18V DC supplies, Hermetic seal
*For Screening Specifications , Environmental specifications and Custom
Options, please refer to page 46.
MECHANICAL SPECIFICATIONS
Case Style
Finish
Bias & Control Pins
Weight
Mounting
S1 Outline
Gold Plate per MIL-G-45204
ø0.02” x 0.15” long
20g max
ø0.10” through holes (4) places
OUTLINE CASE STYLE S1
0.15
1.20
0.35
1.00
0.10
0.10
0.45
ACC
J1 SN:
0000
G
+V
DC: J2
WWYY
-V
0.70
E1
0.90
MODEL NUMBER
SMA FEMALE
(2) PLCS.
0.15
Ø0.10 THRU
MOUNTING HOLE
(4) PLCS.
Ø0.020 X 0.15 LG
SOLDER PIN
(4) PLCS.
0.38
0.15 (3) PLCS.
0.38
REF.
w w w. a e r o f l e x . c o m / a c c
|
1 - 7 3 2 - 4 6 0 - 0 2 12
| 33
Switches
Single-Pole, Two-Throw Switches
The S2 series of single pole, two throw PIN diode switches span the frequency range of
10MHz to 18GHz and available with with absorptive or reflective inputs. The switches are
available in a wide variety of standard frequency ranges from cost-effective narrowband
to high-performance broadband. Each switch incorporates a TTL-compatible driver for
convenient system integration and operates from +5V and -12V to -18VDC power
supplies. All switches incorporate DC blocks at the RF ports. Standard screened switches
incorporate epoxy sealed lids and undergo a stringent yet cost effective screening cycle.
The switches are also available with hermetic seal and high-rel screening for military and
aerospace applications.
REFLECTIVE SWITCHES
Applications
• EW Systems
• Communications Systems
• Antenna Selectors
• Test Equipment
• Electronic Simulators
• Filter Selectors
ABSORPTIVE SWITCHES
Frequency
Range (GHz)
Part
Number
Insertion Loss
(dB max)
VSWR
(max)
Isolation
(dB min)
0.01 – 0.1
0.01 – 0.5
0.01 – 1
0.01 – 2
0.01 – 4
0.01 – 6
0.1 – 0.5
0.1 – 1
0.1 – 2
0.1 – 4
0.1 – 8
0.1 – 10
0.5 – 1
0.5 – 2
0.5 – 4
0.5 – 6
0.5 – 12
0.5 – 18
1–2
1–4
1–8
1 – 10
1 – 12
1 – 14
1 – 18
2–4
2–6
2–8
2 – 10
2 – 12
2 – 16
2 – 18
4–8
4 – 10
4 – 12
4 – 16
4 – 18
6 – 10
6 – 12
6 – 18
8 – 10
8 – 12
8 – 18
10 – 18
12 – 18
S2H1R
S2H2R
S2H3R
S2H4R
S2H5R
S2H6R
S2V1R
S2V2R
S2V3R
S2V4R
S2V5R
S2V6R
S2U1R
S2U2R
S2U3R
S2U4R
S2U5R
S2U6R
S2L1R
S2L2R
S2L3R
S2L4R
S2L5R
S2L6R
S2L7R
S2S1R
S2S2R
S2S3R
S2S4R
S2S5R
S2S6R
S2S7R
S2C1R
S2C2R
S2C3R
S2C4R
S2C5R
S2C6R
S2C7R
S2C8R
S2X1R
S2X2R
S2X3R
S2K1R
S2K2R
0.8
0.9
1.2
1.8
2.6
2.8
0.9
1.2
1.8
2.6
3.2
3.5
1.0
1.4
2.0
2.2
2.6
3.0
0.9
1.2
1.9
2.0
2.1
2.4
2.9
1.1
1.4
1.8
1.9
2.1
2.7
2.9
1.7
1.8
2.0
2.6
2.8
1.9
2.0
2.8
1.8
1.9
2.8
2.8
2.8
1.5
1.5
1.5
1.6
1.8
1.9
1.5
1.5
1.6
1.8
2.0
2.0
1.5
1.6
1.8
1.9
2.0
2.0
1.5
1.6
1.8
2.0
2.0
2.0
2.0
1.6
1.7
1.8
1.8
1.9
2.0
2.0
1.6
1.7
1.8
2.0
2.0
1.7
1.8
2.0
1.7
1.8
2.0
2.0
2.0
75
75
75
75
75
75
80
80
80
75
70
70
80
80
75
75
70
65
80
80
75
70
65
65
60
70
70
70
65
65
60
60
70
65
65
60
60
65
65
60
65
65
60
60
60
34 | w w w . a e r o f l e x . c o m / a c c | 1 - 7 3 2 - 4 6 0 - 0 2 12
Part
Insertion Loss
Number
(dB max)
S2H1
S2H2
S2H3
S2H4
S2H5
S2H6
S2V1
S2V2
S2V3
S2V4
S2V5
S2V6
S2U1
S2U2
S2U3
S2U4
S2U5
S2U6
S2L1
S2L2
S2L3
S2L4
S2L5
S2L6
S2L7
S2S1
S2S2
S2S3
S2S4
S2S5
S2S6
S2S7
S2C1
S2C2
S2C3
S2C4
S2C5
S2C6
S2C7
S2C8
S2X1
S2X2
S2X3
S2K1
S2K2
0.9
1.0
1.3
1.9
2.7
2.9
1.0
1.3
1.9
2.9
3.3
3.6
1.1
1.5
2.1
2.3
2.8
3.2
1.0
1.3
2.0
2.1
2.2
2.6
3.1
1.2
1.5
1.9
2.1
2.2
2.9
3.1
1.9
2.1
2.2
2.9
3.0
2.1
2.2
3.0
2.1
2.2
3.0
3.0
3.0
VSWR
(max)
Isolation
(dB min)
Switching Speed
(nsec max)
MAX RF
(W CW)
1.5
1.5
1.5
1.6
1.8
1.9
1.5
1.5
1.6
1.8
2.0
2.0
1.5
1.6
1.8
1.9
2.0
2.0
1.5
1.6
1.8
2.0
2.0
2.0
2.0
1.6
1.7
1.8
1.8
1.9
2.0
2.0
1.6
1.7
1.8
2.0
2.0
1.7
1.8
2.0
1.7
1.8
2.0
2.0
2.0
80
80
80
80
80
80
80
80
80
80
75
75
80
80
80
75
70
65
85
85
80
75
70
70
65
75
75
75
70
70
65
65
75
70
70
65
65
70
70
65
70
70
65
65
65
250
250
250
250
250
250
250
250
250
250
250
250
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0.5
0.5
1
1
1
0.5
0.5
0.5
0.5
1
1
1
0.5
0.5
0.5
0.5
1
1
0.5
0.5
0.5
1
0.5
0.5
0.5
0.5
0.5
0.5
0.5
Switches
Single-Pole, Two-Throw Switches
NOTES
PART NUMBER ORDERING INFORMATION
DC Bias
(Standard)
DC Bias
(-5 option)
DC Bias
(-12 option)
Control
Standard
Add
Add
Add
Add
Add
Add
Add
Add
Add
Add
Add
Add
Add
Add
Add
Add
Add
+5V ±0.5V @ 80mA max
-15V ±3V @ 50mA max
+5V ±0.5V @ 100mA max
-5V ±0.5V @ 60mA max
+15V ±3V @ 80mA max
-15V ±3V @ 50mA max
TTL 0 = Low Loss
TTL 1 = Isolation
E1 controls J2 – J1
E2 controls J3 – J1
Single Bit Control
E1=0: J2 – J1 low loss,
(-1 option)
J3 – J1 isolation
(E2=N/C)
E1=1:
J3 – J1 low loss,
J2 – J1 isolation
Absorptive switch
50 ohm terminations at both
RF ports
(in isolation mode)
Switching speed is defined as 50%TTL to 90% (t-on)
and 50%TTL to 10%RF (t-off)
“-RC” suffix
“-H” suffix
“-5” suffix
“-5-RC” suffix
“-5-H” suffix
“-12” suffix
“-12-RC” suffix
“-12-H” suffix
“-1” suffix
“-1-RC” suffix
“-1-H” suffix
“-1-5” suffix
“-1-5-RC” suffix
“-1-5-H” suffix
“-1-12” suffix
“-1-12-RC” suffix
“-1-12-H” suffix
RoHS-compliant
Hermetic seal
±5V DC supplies
±5V DC supplies, RoHS-compliant
±5V DC supplies, Hermetic seal
±12V to 18V DC supplies
±12V to 18V DC supplies, RoHS-compliant
±12V to 18V DC supplies, Hermetic seal
Single bit logic control
Single bit logic control, RoHS-compliant
Single bit logic control, Hermetic seal
Single bit logic control, ±5V DC supplies
Single bit logic control, ±5V DC supplies, RoHS-compliant
Single bit logic control, ±5V DC supplies, Hermetic seal
Single bit logic control, ±12V to 18V DC supplies
Single bit logic control, ±12V to 18V DC supplies, RoHS compliant
Single bit logic control, ±12V to 18V DC supplies, Hermetic seal
*For Screening Specifications , Environmental
specifications and Custom Options, please refer to
page 46.
MECHANICAL SPECIFICATIONS
Case Styles
S2 Outline (Two bit control)
S2-1 Outline (Single bit control)
Gold Plate per MIL-G-45204, Chem film per MIL-C-5541
SMA Female per MIL-C-39012
ø0.02” x 0.15” long
20g max
ø0.10” through holes (4) places
Finish
Connectors
Bias & Control Pins
Weight
Mounting
OUTLINE CASE STYLE S2
OUTLINE CASE STYLE S2-1
0.60
0.15
0.60
0.15
1.20
1.000
1.20
1.000
0.35
0.10
0.35
0.10
MODEL NUMBER
MODEL NUMBER
0.10
0.10
J1
0.45
2-PLS
ACC
0.90
0.700
J2 SN:
0000
SMA FEMALE
3-PLS
Ø0.100 THRU
MOUNTING HOLE
4- PLS.
Ø0.020 X 0.15 LG
SOLDER PIN
5-PLS
DC: J3
WWYY
SMA FEMALE
3-PLS
Ø0.100 THRU
MOUNTING HOLE
4- PLS.
Ø0.020 X 0.15 LG
SOLDER PIN
5-PLS
0.30
0.30
0.150 4-PLS
0.150 4-PLS
0.15
0.38
REF
0.45
2-PLS
G
+V
-V
DC: J3
WWYY
N/C
E1
J2 SN:
0000
G
+V
-V
0.700
E1
E2
0.90
J1
ACC
0.15
0.38
REF
w w w. a e r o f l e x . c o m / a c c
|
1 - 7 3 2 - 4 6 0 - 0 2 12
| 35
Switches
Single-Pole, Three-Throw Switches
The S3 series of single pole, three throw PIN diode switches span the frequency range
of 10MHz to 18GHz and are available with absorptive or reflective inputs. The switches
are available in a wide variety of standard frequency ranges from cost-effective
narrowband to high-performance broadband. Each switch incorporates a TTL-compatible
driver for convenient system integration and operates from +5V and -12V to -18V DC
power supplies. All switches incorporate DC blocks at the RF ports. Standard screened
switches incorporate epoxy sealed lids and undergo a stringent yet cost effective
screening cycle. The switches are also available with hermetic seal and high-rel
screening for military and aerospace applications.
REFLECTIVE SWITCHES
Frequency
Range (GHz)
0.01 – 0.1
0.01 – 0.5
0.01 – 1
0.01 – 2
0.01 – 4
0.01 – 6
0.1 – 0.5
0.1 – 1
0.1 – 2
0.1 – 4
0.1 – 8
0.1 – 10
0.5 – 1
0.5 – 2
0.5 – 4
0.5 – 6
0.5 – 12
0.5 – 18
1–2
1–4
1–8
1 – 10
1 – 12
1 – 14
1 – 18
2–4
2–6
2–8
2 – 10
2 – 12
2 – 16
2 – 18
4–8
4 – 10
4 – 12
4 – 16
4 – 18
6 – 10
6 – 12
6 – 18
8 – 10
8 – 12
8 – 18
10 – 18
12 – 18
Part
Insertion Loss VSWR
Number
(dB max)
(max)
S3H1R
S3H2R
S3H3R
S3H4R
S3H5R
S3H6R
S3V1R
S3V2R
S3V3R
S3V4R
S3V5R
S3V6R
S3U1R
S3U2R
S3U3R
S3U4R
S3U5R
S3U6R
S3L1R
S3L2R
S3L3R
S3L4R
S3L5R
S3L6R
S3L7R
S3S1R
S3S2R
S3S3R
S3S4R
S3S5R
S3S6R
S3S7R
S3C1R
S3C2R
S3C3R
S3C4R
S3C5R
S3C6R
S3C7R
S3C8R
S3X1R
S3X2R
S3X3R
S3K1R
S3K2R
0.9
1.0
1.3
1.9
2.7
2.9
1.0
1.3
1.9
2.7
3.4
3.7
1.1
1.5
2.1
2.3
2.7
3.2
1.0
1.3
2.0
2.1
2.3
2.6
3.1
1.2
1.5
1.9
2.0
2.3
2.9
3.1
1.8
1.9
2.2
2.8
3.0
2.0
2.2
3.0
1.9
2.1
3.0
3.0
3.0
1.5
1.5
1.5
1.6
1.8
1.9
1.5
1.5
1.6
1.8
2.0
2.0
1.5
1.6
1.8
1.9
2.0
2.0
1.5
1.6
1.8
2.0
2.0
2.0
2.0
1.6
1.7
1.8
1.8
1.9
2.0
2.0
1.6
1.7
1.8
2.0
2.0
1.7
1.8
2.0
1.7
1.8
2.0
2.0
2.0
Applications
• EW Systems
• Communications Systems
• Antenna Selectors
• Test Equipment
• Electronic Simulators
• Filter Selectors
ABSORPTIVE SWITCHES
Isolation
(dB min)
Part
Number
Insertion Loss
(dB max)
VSWR
(max)
Isolation
(dB min)
Switching Speed
(nsec max)
MAX RF
(W CW)
75
75
75
75
75
75
80
80
80
75
70
70
80
80
75
70
65
60
80
80
75
70
65
65
60
70
70
70
65
65
60
60
70
65
65
60
60
65
65
60
65
65
60
60
60
S3H1
S3H2
S3H3
S3H4
S3H5
S3H6
S3V1
S3V2
S3V3
S3V4
S3V5
S3V6
S3U1
S3U2
S3U3
S3U4
S3U5
S3U6
S3L1
S3L2
S3L3
S3L4
S3L5
S3L6
S3L7
S3S1
S3S2
S3S3
S3S4
S3S5
S3S6
S3S7
S3C1
S3C2
S3C3
S3C4
S3C5
S3C6
S3C7
S3C8
S3X1
S3X2
S3X3
S3K1
S3K2
1.0
1.1
1.4
2.0
2.8
3.0
1.1
1.4
2.0
3.0
3.5
3.8
1.2
1.6
2.2
2.4
2.8
3.4
1.1
1.4
2.1
2.2
2.4
2.8
3.3
1.4
1.6
2.0
2.2
2.4
3.1
3.3
2.0
2.2
2.4
3.1
3.2
2.2
2.4
3.2
2.2
2.4
3.2
3.2
3.2
1.5
1.5
1.5
1.6
1.8
1.9
1.5
1.5
1.6
1.8
2.0
2.0
1.5
1.6
1.8
1.9
2.0
2.0
1.5
1.6
1.8
2.0
2.0
2.0
2.0
1.6
1.7
1.8
1.8
1.9
2.0
2.0
1.6
1.7
1.8
2.0
2.0
1.7
1.8
2.0
1.7
1.8
2.0
2.0
2.0
80
80
80
80
80
80
80
80
80
80
75
75
80
80
80
75
70
65
85
85
80
75
70
70
65
75
75
75
70
70
65
65
75
70
70
65
65
70
70
65
70
70
65
65
65
250
250
250
250
250
250
250
250
250
250
250
250
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
1
1
1
1
1
1
1
1
1
1
0.5
0.5
1
1
1
1
0.5
0.5
1
1
0.5
0.5
0.5
0.5
0.5
1
1
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
36 | w w w . a e r o f l e x . c o m / a c c | 1 - 7 3 2 - 4 6 0 - 0 2 12
Switches
Single-Pole, Three-Throw Switches
NOTES
PART NUMBER ORDERING INFORMATION
DC Bias
(Standard)
DC Bias
(-5 option)
DC Bias
(-12 option)
Control
Add
Add
Add
Add
Add
+5V ±0.5V @ 120mA max
-15V ±3V @ 50mA max
+5V ±0.5V @ 150mA max
-5V ±0.5V @ 60mA max
+15V ±3V @ 120mA max
-15V ±3V @ 50mA max
TTL 0 = Low Loss
TTL 1 = Isolation
E1 controls J2 – J1
E2 controls J3 – J1
E3 controls J4 – J1
Absorptive switch:
Internal 50 terminations at J2, J3, and J4
(in isolation mode).
Switching speed is defined as 50%TTL to 90% (t-on) and 50%TTL to
10%RF (t-off)
“-RC” suffix
“-H” suffix
“-5” suffix
“-5-RC” suffix
“-5-H” suffix
Add “-12” suffix
Add “-12-RC”suffix
Add “-12-H” suffix
RoHS-compliant
Hermetic seal
±5V DC supplies
±5V DC supplies, RoHS-compliant
±5V DC supplies, Hermetic seal
±12V to 18V DC supplies
±12V to 18V DC supplies, RoHS-compliant
±12V to 18V DC supplies, Hermetic seal
*For Screening Specifications , Environmental specifications and
Custom Options, please refer to page 46.
MECHANICAL SPECIFICATIONS
Case Styles
Finish
Connectors
Bias & Control Pins
Weight
Mounting
S3 Outline
Gold plate per MIL-G-45204, Chem film per MIL-C-5541
SMA Female per MIL-C-39012
ø0.02” x 0.15” long
35g max
ø0.10” through holes (4) places
OUTLINE CASE STYLE S3
0.40
0.20
0.40
0.15
TYP.
0.15
TYP.
1.20
1.000
0.10
MODEL NUMBER
0.10
+V
1.20 1.000
J1 -V
0.40
0.60
(2) PLCS.
G
E3
ACC
J4
J2
E1 SN:
0000
0.40
0.50
Ø0.020 X 0.15 LG
SOLDER PIN
(6) PLCS.
DC:
WWYY
J3
SMA FEMALE
(4) PLCS.
E2
Ø0.100 THRU
MOUNTING HOLE
(4) PLCS.
0.60
(2) PLCS.
0.38
REF
0.40
w w w. a e r o f l e x . c o m / a c c
|
1 - 7 3 2 - 4 6 0 - 0 2 12
| 37
Switches
Single-Pole, Four-Throw Switches
The S4 series of single pole, four throw PIN diode switches span the frequency range off
10MHz to 18GHz and are available with absorptive or reflective inputs. The switches are
available in a wide variety of standard frequency ranges from cost-effective narrowband
to high-performance broadband. Each switch incorporates a TTL-compatible driver for
convenient system integration and operates from +5V and -12V to -18V DC power
supplies. All switches incorporate DC blocks at the RF ports. Standard screened
switches incorporate epoxy sealed lids and undergo a stringent yet cost effective
screening cycle. The switches are also available with hermetic seal and high-rel
screening for military and aerospace applications.
REFLECTIVE SWITCHES
Applications
• EW Systems
• Communications Systems
• Antenna Selectors
• Test Equipment
• Electronic Simulators
• Filter Selectors
ABSORPTIVE SWITCHES
Frequency
Range (GHz)
Part
Number
Insertion Loss
(dB max)
VSWR
(max)
Isolation
(dB min)
Part
Number
Insertion Loss
(dB max)
VSWR
(max)
Isolation
(dB min)
0.01 – 0.1
0.01 – 0.5
0.01 – 1
0.01 – 2
0.01 – 4
0.01 – 6
0.1 – 0.5
0.1 – 1
0.1 – 2
0.1 – 4
0.1 – 8
0.1 – 10
0.5 – 1
0.5 – 2
0.5 – 4
0.5 – 6
0.5 – 12
0.5 – 18
1–2
1–4
1–8
1 – 10
1 – 12
1 – 14
1 – 18
2–4
2–6
2–8
2 – 10
2 – 12
2 – 16
2 – 18
4–8
4 – 10
4 – 12
4 – 16
4 – 18
6 – 10
6 – 12
6 – 18
8 – 10
8 – 12
8 – 18
10 – 18
12 – 18
S4H1R
S4H2R
S4H3R
S4H4R
S4H5R
S4H6R
S4V1R
S4V2R
S4V3R
S4V4R
S4V5R
S4V6R
S4U1R
S4U2R
S4U3R
S4U4R
S4U5R
S4U6R
S4L1R
S4L2R
S4L3R
S4L4R
S4L5R
S4L6R
S4L7R
S4S1R
S4S2R
S4S3R
S4S4R
S4S5R
S4S6R
S4S7R
S4C1R
S4C2R
S4C3R
S4C4R
S4C5R
S4C6R
S4C7R
S4C8R
S4X1R
S4X2R
S4X3R
S4K1R
S4K2R
1.0
1.1
1.4
2.0
2.8
3.0
1.1
1.4
2.0
2.8
3.5
3.8
1.2
1.6
2.2
2.5
2.8
3.4
1.1
1.4
2.1
2.2
2.5
2.8
3.3
1.3
1.6
2.0
2.1
2.5
3.1
3.3
1.9
2.0
2.4
3.0
3.2
2.1
2.4
3.2
2.0
2.3
3.2
3.2
3.2
1.5
1.5
1.5
1.6
1.8
1.9
1.5
1.5
1.6
1.8
2.0
2.0
1.5
1.6
1.8
1.9
2.0
2.0
1.5
1.6
1.8
2.0
2.0
2.0
2.0
1.6
1.7
1.8
1.8
1.9
2.0
2.0
1.6
1.7
1.8
2.0
2.0
1.7
1.8
2.0
1.7
1.8
2.0
2.0
2.0
75
75
75
75
75
75
80
80
80
75
70
70
80
80
75
70
65
60
80
80
75
70
65
65
60
70
70
70
65
65
60
60
70
65
65
60
60
65
65
60
65
65
60
60
60
S4H1
S4H2
S4H3
S4H4
S4H5
S4H6
S4V1
S4V2
S4V3
S4V4
S4V5
S4V6
S4U1
S4U2
S4U3
S4U4
S4U5
S4U6
S4L1
S4L2
S4L3
S4L4
S4L5
S4L6
S4L7
S4S1
S4S2
S4S3
S4S4
S4S5
S4S6
S4S7
S4C1
S4C2
S4C3
S4C4
S4C5
S4C6
S4C7
S4C8
S4X1
S4X2
S4X3
S4K1
S4K2
1.1
1.2
1.5
2.1
2.9
3.1
1.2
1.5
2.1
2.9
3.6
3.9
1.3
1.7
2.3
2.6
3.0
3.6
1.2
1.5
2.2
2.3
2.6
3.0
3.7
1.4
1.7
2.2
2.3
2.6
3.3
3.7
2.2
2.3
2.6
3.3
3.4
2.3
2.6
3.4
2.3
2.6
3.4
3.4
3.4
1.5
1.5
1.5
1.6
1.8
1.9
1.5
1.5
1.6
1.8
2.0
2.0
1.5
1.6
1.8
1.9
2.0
2.0
1.5
1.6
1.8
2.0
2.0
2.0
2.0
1.6
1.7
1.8
1.8
1.9
2.0
2.0
1.6
1.7
1.8
2.0
2.0
1.7
1.8
2.0
1.7
1.8
2.0
2.0
2.0
80
80
80
80
80
80
80
80
80
80
75
75
80
80
80
75
70
65
85
85
80
75
70
70
65
75
75
75
70
70
65
65
75
70
70
65
65
70
70
65
70
70
65
65
65
38 | w w w . a e r o f l e x . c o m / a c c | 1 - 7 3 2 - 4 6 0 - 0 2 12
Switching Speed MAX RF
(nsec max)
(W CW)
250
250
250
250
250
250
250
250
250
250
250
250
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
1
1
1
1
1
1
1
1
1
1
0.5
0.5
1
1
1
0.5
0.5
0.5
1
1
0.5
0.5
0.5
0.5
0.5
1
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
Switches
Single-Pole, Four-Throw Switches
NOTES
PART NUMBER ORDERING INFORMATION
DC Bias
(Standard)
DC Bias
(-5 option)
DC Bias
(-12 option)
Control
Standard
+5V ±0.5V @ 160mA max
-15V ±3V @ 50mA max
+5V ±0.5V @ 200mA max
-5V ±0.5V @ 60mA max
+15V ±3V @ 160mA max
-15V ±3V @ 50mA max
TTL 0 = Low Loss
TTL 1 = Isolation
E1 controls J2 – J1
E2 controls J3 – J1
E3 controls J4 – J1
E4 controls J5 – J1
Two-line control:
(-2 option)
E2 E1 Low loss path
0 0
J2 – J1
0 1
J3 – J1
1 0
J4 – J1
1 1
J5 – J1
Absorptive switch: Internal 50 terminations at J2, J3,
J4 and J5 (in isolation mode).
Switching speed is defined as 50%TTL to 90% (t-on)
and 50%TTL to 10%RF (t-off)
Add
Add
Add
Add
Add
“-RC” suffix
“-H” suffix
“-5” suffix
“-5-RC” suffix
“-5-H” suffix
RoHS-compliant
Hermetic seal
±5V DC supplies
±5V DC supplies, RoHS-compliant
±5V DC supplies, Hermetic seal
Add
Add
Add
Add
Add
Add
Add
Add
“-12” suffix
“-12-RC” suffix
“-12-H” suffix
“-2”
“-2-RC” suffix
“-2-H” suffix
“-2-5” suffix:
“-2-5-RC” suffix
±12V to 18V DC supplies
±12V to 18V DC supplies, RoHS-compliant
±12V to 18V DC supplies, Hermetic seal
Two-bit logic control
Two-bit logic control, RoHS-compliant
Two-bit logic control, Hermetic seal
Two-bit logic control, ±5V DC supplies
Two-bit logic control, ±5V DC supplies, RoHS-compliant
Add
Add
Add
Add
“-2-5-H” suffix
“-2-12” suffix
“-2-12-RC” suffix
“-2-12-H” suffix
Two-bit
Two-bit
Two-bit
Two-bit
logic
logic
logic
logic
control,
control,
control,
control,
±5V DC
±12V to
±12V to
±12V to
supplies, Hermetic seal
18V DC supplies
18V DC supplies, RoHS-compliant
18V DC supplies, Hermetic seal
*For Screening Specifications , Environmental specifications and Custom Options, please
refer to page 46.
MECHANICAL SPECIFICATIONS
Case Styles
S4 Outline (Standard logic)
S4-2 Outline (Two-bit logic)
Gold plate per MIL-G-45204
SMA Female per MIL-C-39012
ø0.02” x 0.15” long
60g max
ø0.10” through holes (2) places
Finish
Connectors
Bias & Control Pins
Weight
Mounting
OUTLINE CASE STYLE S4
OUTLINE CASE STYLE S4-2
0.38
REF.
1.50
2X
Ø0.100 THRU
MOUNTING HOLE
0.75
0.31
TYP
0.75
0.31
TYP
0.25
0.25
MODEL NUMBER
MODEL NUMBER
J3
J3
J4
1.360
DC:
WWYY
SN:
0000
J2
J4
ACC
ACC
DC:
WWYY
SN:
0000
J2
1.50
J5
1.360
1.50
J5
45°
J1
J1
A
7X
Ø0.020 X 0.15 LG
SOLDER PIN
A
B
0.07
5X
SMA FEMALE
7X
Ø0.020 X 0.15 LG
SOLDER PIN
0.28
0.560
VIEW A-A
0.33
VIEW B-B
0.15
TYP.
0.45
CL
0.75
B
-V
-V
N
E /C
N 2
E1 /C
A
0.75
B
G
G
E
E 4
E 3
E1 2
+V
A
+V
45°
0.33
0.38
REF.
1.50
2X
Ø0.100 THRU
MOUNTING HOLE
0.15
(2) PLCS.
0.08
(3) PLCS.
B
0.07
5X
SMA FEMALE
0.28
0.560
VIEW A-A
VIEW B-B
0.15
TYP.
0.45
CL
0.15
(2) PLCS.
0.08
(3) PLCS.
CL
CL
w w w. a e r o f l e x . c o m / a c c
|
1 - 7 3 2 - 4 6 0 - 0 2 12
| 39
Switches
Single-Pole, Five-Throw Switches
The S5 series of single pole, five throw PIN diode switches span the frequency range of
10MHz to 18GHz and are available with absorptive or reflective inputs. The switches are
available in a wide variety of standard frequency ranges from cost-effective narrowband
to high-performance broadband. Each switch incorporates a TTL-compatible driver for
convenient system integration and operates from +5V and -12V to -18V DC power
supplies. All switches incorporate DC blocks at the RF ports. Standard screened switches
incorporate epoxy sealed lids and undergo a stringent yet cost effective screening cycle.
The switches are also available with hermetic seal and high-rel screening for military and
aerospace applications.
REFLECTIVE SWITCHES
Applications
• EW Systems
• Communications Systems
• Antenna Selectors
• Test Equipment
• Electronic Simulators
• Filter Selectors
ABSORPTIVE SWITCHES
Frequency
Range (GHz)
Part
Number
Insertion Loss
(dB max)
VSWR
(max)
Isolation
(dB min)
Part
Number
Insertion Loss
(dB max)
VSWR
(max)
Isolation
(dB min)
0.01 – 0.1
0.01 – 0.5
0.01 – 1
0.01 – 2
0.01 – 4
0.01 – 6
0.1 – 0.5
0.1 – 1
0.1 – 2
0.1 – 4
0.1 – 8
0.1 – 10
0.5 – 1
0.5 – 2
0.5 – 4
0.5 – 6
0.5 – 12
0.5 – 18
1–2
1–4
1–8
1 – 10
1 – 12
1 – 14
1 – 18
2–4
2–6
2–8
2 – 10
2 – 12
2 – 16
2 – 18
4–8
4 – 10
4 – 12
4 – 16
4 – 18
6 – 10
6 – 12
6 – 18
8 – 10
8 – 12
8 – 18
10 – 18
12 – 18
S5H1R
S5H2R
S5H3R
S5H4R
S5H5R
S5H6R
S5V1R
S5V2R
S5V3R
S5V4R
S5V5R
S5V6R
S5U1R
S5U2R
S5U3R
S5U4R
S5U5R
S5U6R
S5L1R
S5L2R
S5L3R
S5L4R
S5L5R
S5L6R
S5L7R
S5S1R
S5S2R
S5S3R
S5S4R
S5S5R
S5S6R
S5S7R
S5C1R
S5C2R
S5C3R
S5C4R
S5C5R
S5C6R
S5C7R
S5C8R
S5X1R
S5X2R
S5X3R
S5K1R
S5K2R
1.1
1.2
1.5
2.1
2.9
3.1
1.2
1.5
2.1
2.9
3.6
3.9
1.3
1.7
2.3
2.6
3.0
3.6
1.2
1.5
2.2
2.3
2.7
3.0
3.5
1.4
1.7
2.1
2.2
2.7
3.3
3.5
2.0
2.1
2.6
3.2
3.4
2.2
2.6
3.4
2.1
2.5
3.4
3.4
3.4
1.5
1.5
1.5
1.6
1.8
1.9
1.5
1.5
1.6
1.8
2.0
2.0
1.5
1.6
1.8
1.9
2.0
2.0
1.5
1.6
1.8
2.0
2.0
2.0
2.0
1.6
1.7
1.8
1.8
1.9
2.0
2.0
1.6
1.7
1.8
2.0
2.0
1.7
1.8
2.0
1.7
1.8
2.0
2.0
2.0
75
75
75
75
75
75
80
80
80
75
70
70
80
80
75
70
65
60
80
80
75
70
65
65
60
70
70
70
65
65
60
60
70
65
65
60
60
65
65
60
65
65
60
60
60
S5H1
S5H2
S5H3
S5H4
S5H5
S5H6
S5V1
S5V2
S5V3
S5V4
S5V5
S5V6
S5U1
S5U2
S5U3
S5U4
S5U5
S5U6
S5L1
S5L2
S5L3
S5L4
S5L5
S5L6
S5L7
S5S1
S5S2
S5S3
S5S4
S5S5
S5S6
S5S7
S5C1
S5C2
S5C3
S5C4
S5C5
S5C6
S5C7
S5C8
S5X1
S5X2
S5X3
S5K1
S5K2
1.2
1.3
1.6
2.2
3.0
3.2
1.3
1.6
2.2
3.0
3.8
4.0
1.4
1.8
2.4
2.8
3.2
3.8
1.3
1.6
2.3
2.4
2.8
3.2
3.9
1.5
1.8
2.3
2.4
2.8
3.5
3.9
2.3
2.4
2.8
3.5
3.6
2.4
2.8
3.6
2.4
2.8
3.6
3.6
3.6
1.5
1.5
1.5
1.6
1.8
1.9
1.5
1.5
1.6
1.8
2.0
2.0
1.5
1.6
1.8
1.9
2.0
2.0
1.5
1.6
1.8
2.0
2.0
2.0
2.0
1.6
1.7
1.8
1.8
1.9
2.0
2.0
1.6
1.7
1.8
2.0
2.0
1.7
1.8
2.0
1.7
1.8
2.0
2.0
2.0
80
80
80
80
80
80
80
80
80
80
75
75
80
80
80
75
70
65
85
85
80
75
70
70
65
75
75
75
70
70
65
65
75
70
70
65
65
70
70
65
70
70
65
65
65
40 | w w w . a e r o f l e x . c o m / a c c | 1 - 7 3 2 - 4 6 0 - 0 2 12
Switching Speed MAX RF
(nsec max)
(W CW)
250
250
250
250
250
250
250
250
250
250
250
250
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
1
1
1
1
1
1
1
1
1
1
0.5
0.5
1
1
1
0.5
0.5
0.5
1
1
0.5
0.5
0.5
0.5
0.5
1
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
Switches
Single-Pole, Five-Throw Switches
NOTES
MECHANICAL SPECIFICATIONS
DC Bias
(Standard)
DC Bias
(-5 option)
DC Bias
(-12 option)
Control
Standard
Case Styles
+5V ±0.5V @ 200mA max
-15V ±3V @ 50mA max
+5V ±0.5V @ 250mA max
-5V ±0.5V @ 60mA max
+5V ±0.5V @ 200mA max
-15V ±3V @ 50mA max
TTL 0 = Low Loss
TTL 1 = Isolation
E1 controls J2 – J1
E2 controls J3 – J1
E3 controls J4 – J1
E4 controls J5 – J1
E5 controls J6 – J1
Three-line control:
E3 E2 E1 Low loss path
(-3 option)
0 0 0
J2 – J1
0 0 1
J3 – J1
0 1 0
J4 – J1
0 1 1
J5 – J1
1 0 0
J6 – J1
1 0 1
All off
1 1 0
All off
1 1 1
All off
Absorptive switch: Internal 50 terminations at J2, J3,
J4, J5 and J6 (in isolation mode).
Switching speed is defined as 50%TTL to 90% (t-on)
and 50%TTL to 10%RF (t-off)
Finish
Connectors
Bias & Control Pins
Weight
Mounting
PART NUMBER ORDERING INFORMATION
*For Screening Specifications , Environmental
specifications and Custom Options, please refer to
page 46.
Add
Add
Add
Add
Add
“-RC” suffix
“-H” suffix
“-5” suffix
“-5-RC” suffix
“-5-H” suffix
RoHS-compliant
Hermetic seal
±5V DC supplies
±5V DC supplies, RoHS-compliant
±5V DC supplies, Hermetic seal
Add
Add
Add
Add
Add
Add
Add
Add
“-12” suffix
“-12-RC” suffix
“-12-H” suffix
“-3”
“-3-RC” suffix
“-3-H” suffix
“-3-5” suffix:
“-3-5-RC” suffix
±12V to 18V DC supplies
±12V to 18V DC supplies, RoHS-compliant
±12V to 18V DC supplies, Hermetic seal
Three-bit logic control
Three-bit logic control, RoHS-compliant
Three-bit logic control, Hermetic seal
Three-bit logic control, ±5V DC supplies
Three-bit logic control, ±5V DC supplies, RoHS-compliant
Add
Add
Add
Add
“-3-5-H” suffix
“-3-12” suffix
“-3-12-RC” suffix
“-3-12-H” suffix
Three-bit
Three-bit
Three-bit
Three-bit
OUTLINE CASE STYLE S5
2X
Ø0.100 THRU
MOUNTING HOLE
S5 Outline (Standard logic)
S5-3 Outline (Three-bit logic)
Gold plate per MIL-G-45204
SMA Female per MIL-C-39012
ø0.02” x 0.15” long
60g max
ø0.10” through holes (2) places
logic
logic
logic
logic
control,
control,
control,
control,
0.38
REF.
1.50
2X
Ø0.100 THRU
MOUNTING HOLE
0.25
0.31
TYP
J4
J3
J5
1.360
1.50
J6
E
E 5
E 4
E 3
E1 2
-V
0.07
A
6X
SMA FEMALE
0.560
Ø0.020 X 0.15 LG
SOLDER PIN
0.33
VIEW B-B
0.15
TYP.
0.45
CL
0.07
0.28
8X
0.560
VIEW A-A
B
6X
SMA FEMALE
Ø0.020 X 0.15 LG
SOLDER PIN
0.33
-V
G
B
0.28
8X
0.75
B
J1
J1
A
G
A
0.75
+V
+V
B
1.360
1.50
J6
45°
45°
A
DC:
WWYY
SN:
0000
J2
E
N 3
E /C
N 2
E1 /C
DC:
WWYY
SN:
0000
J5
ACC
ACC
0.25
0.31
TYP
MODEL NUMBER
J2
0.38
REF.
1.50
0.75
J4
J3
supplies, Hermetic seal
18V DC supplies
18V DC supplies, RoHS-compliant
18V DC supplies, Hermetic seal
OUTLINE CASE STYLE S5-3
0.75
MODEL NUMBER
±5V DC
±12V to
±12V to
±12V to
0.15
(2) PLCS.
0.08
(4) PLCS.
VIEW A-A
VIEW B-B
0.15
TYP.
0.45
CL
0.15
(2) PLCS.
0.08
(4) PLCS.
CL
CL
w w w. a e r o f l e x . c o m / a c c
|
1 - 7 3 2 - 4 6 0 - 0 2 12
| 41
Switches
Single-Pole, Six-Throw Switches
The S6 series of single pole, six throw PIN diode switches span the frequency range of
10MHz to 18GHz and are available with absorptive or reflective inputs. The switches are
available in a wide variety of standard frequency ranges from cost-effective narrowband
to high-performance broadband. Each switch incorporates a TTL-compatible driver for
convenient system integration and operates from +5V and -12V to -18V DC power
supplies. All switches incorporate DC blocks at the RF ports. Standard screened switches
incorporate epoxy sealed lids and undergo a stringent yet cost effective screening cycle.
The switches are also available with hermetic seal and high-rel screening for military and
aerospace applications.
REFLECTIVE SWITCHES
Applications
• EW Systems
• Communications Systems
• Antenna Selectors
• Test Equipment
• Electronic Simulators
• Filter Selectors
ABSORPTIVE SWITCHES
Frequency
Range (GHz)
Part
Number
Insertion Loss
(dB max)
VSWR
(max)
Isolation
(dB min)
Part
Number
Insertion Loss
(dB max)
VSWR
(max)
Isolation
(dB min)
Switching Speed
(nsec max)
MAX RF
(W CW)
0.01 – 0.1
0.01 – 0.5
0.01 – 1
0.01 – 2
0.01 – 4
0.01 – 6
0.1 – 0.5
0.1 – 1
0.1 – 2
0.1 – 4
0.1 – 8
0.1 – 10
0.5 – 1
0.5 – 2
0.5 – 4
0.5 – 6
0.5 – 12
0.5 – 18
1–2
1–4
1–8
1 – 10
1 – 12
1 – 14
1 – 18
2–4
2–6
2–8
2 – 10
2 – 12
2 – 16
2 – 18
4–8
4 – 10
4 – 12
4 – 16
4 – 18
6 – 10
6 – 12
6 – 18
8 – 10
8 – 12
8 – 18
10 – 18
12 – 18
S6H1R
S6H2R
S6H3R
S6H4R
S6H5R
S6H6R
S6V1R
S6V2R
S6V3R
S6V4R
S6V5R
S6V6R
S6U1R
S6U2R
S6U3R
S6U4R
S6U5R
S6U6R
S6L1R
S6L2R
S6L3R
S6L4R
S6L5R
S6L6R
S6L7R
S6S1R
S6S2R
S6S3R
S6S4R
S6S5R
S6S6R
S6S7R
S6C1R
S6C2R
S6C3R
S6C4R
S6C5R
S6C6R
S6C7R
S6C8R
S6X1R
S6X2R
S6X3R
S6K1R
S6K2R
1.2
1.3
1.6
2.2
3.0
3.2
1.3
1.6
2.2
3.0
3.7
4.0
1.5
1.8
2.4
2.7
3.2
3.8
1.3
1.6
2.3
2.4
2.9
3.2
3.7
1.5
1.8
2.2
2.3
2.9
3.5
3.7
2.1
2.2
2.8
3.4
3.6
2.3
2.8
3.6
2.2
2.7
3.6
3.6
3.6
1.5
1.5
1.5
1.6
1.8
1.9
1.5
1.5
1.6
1.8
2.0
2.0
1.5
1.6
1.8
1.9
2.0
2.0
1.5
1.6
1.8
2.0
2.0
2.0
2.0
1.6
1.7
1.8
1.8
1.9
2.0
2.0
1.6
1.7
1.8
2.0
2.0
1.7
1.8
2.0
1.7
1.8
2.0
2.0
2.0
75
75
75
75
75
75
80
80
80
75
70
70
80
80
75
70
65
60
80
80
75
70
65
65
60
70
70
70
65
65
60
60
70
65
65
60
60
65
65
60
65
65
60
60
60
S6H1
S6H2
S6H3
S6H4
S6H5
S6H6
S6V1
S6V2
S6V3
S6V4
S6V5
S6V6
S6U1
S6U2
S6U3
S6U4
S6U5
S6U6
S6L1
S6L2
S6L3
S6L4
S6L5
S6L6
S6L7
S6S1
S6S2
S6S3
S6S4
S6S5
S6S6
S6S7
S6C1
S6C2
S6C3
S6C4
S6C5
S6C6
S6C7
S6C8
S6X1
S6X2
S6X3
S6K1
S6K2
1.3
1.4
1.7
2.3
3.1
3.3
1.4
1.7
2.3
3.1
3.8
4.1
1.5
1.9
2.5
3.0
3.4
4.1
1.4
1.7
2.4
2.5
3.0
3.4
4.1
1.6
1.9
2.4
2.5
3.0
3.7
4.0
2.4
2.5
3.0
3.7
3.9
2.5
3.0
3.9
2.5
3.0
3.9
3.9
3.9
1.5
1.5
1.5
1.6
1.8
1.9
1.5
1.5
1.6
1.8
2.0
2.0
1.5
1.6
1.8
1.9
2.0
2.0
1.5
1.6
1.8
2.0
2.0
2.0
2.0
1.6
1.7
1.8
1.8
1.9
2.0
2.0
1.6
1.7
1.8
2.0
2.0
1.7
1.8
2.0
1.7
1.8
2.0
2.0
2.0
80
80
80
80
80
80
80
80
80
80
75
75
80
80
80
75
70
65
85
85
80
75
70
70
65
75
75
75
70
70
65
65
75
70
70
65
65
70
70
65
70
70
65
65
65
250
250
250
250
250
250
250
250
250
250
250
250
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
1
1
1
1
0.5
1
1
1
1
0.5
0.5
0.5
1
1
0.5
0.5
0.5
0.5
1
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
42 | w w w . a e r o f l e x . c o m / a c c | 1 - 7 3 2 - 4 6 0 - 0 2 12
Switches
Single-Pole, Six-Throw Switches
NOTES
MECHANICAL SPECIFICATIONS
DC Bias
(Standard)
DC Bias
(-5 option)
DC Bias
(-12 option)
Control
Standard
Case Styles
+5V ±0.5V @ 240mA max
-15V ±3V @ 50mA max
+5V ±0.5V @ 300mA max
-5V ±0.5V @ 60mA max
+5V ±0.5V @ 240mA max
-15V ±3V @ 50mA max
TTL 0 = Low Loss
TTL 1 = Isolation
E1 controls J2 – J1
E2 controls J3 – J1
E3 controls J4 – J1
E4 controls J5 – J1
E5 controls J6 – J1
E6 controls J7 – J1
Three-line control:
E3 E2 E1 Low loss path
(-3 option)
0 0 0
J2 – J1
0 0 1
J3 – J1
0 1 0
J4 – J1
0 1 1
J5 – J1
1 0 0
J6 – J1
1 0 1
J7 – J1
1 1 0
All off
1 1 1
All off
Absorptive switch: Internal 50 terminations at J2, J3,
J4, J5, J6 and J7 (in isolation mode).
Switching speed is defined as 50%TTL to 90% (t-on)
and 50%TTL to 10%RF (t-off)
S6 Outline (Standard logic)
S6-3 Outline (Three-bit logic)
Gold plate per MIL-G-45204
SMA Female per MIL-C-39012
ø0.02” x 0.15” long
65g max
ø0.10” through holes (2) places
Finish
Connectors
Bias & Control Pins
Weight
Mounting
PART NUMBER ORDERING INFORMATION
*For Screening Specifications , Environmental
specifications and Custom Options please refer to
page 46.
Add
Add
Add
Add
Add
“-RC” suffix
“-H” suffix
“-5” suffix
“-5-RC” suffix
“-5-H” suffix
RoHS-compliant
Hermetic seal
±5V DC supplies
±5V DC supplies, RoHS-compliant
±5V DC supplies, Hermetic seal
Add
Add
Add
Add
Add
Add
Add
“-12” suffix
“-12-RC” suffix
“-12-H” suffix
“-3”
“-3-RC” suffix
“-3-H” suffix
“-3-5” suffix:
±12V to 18V DC supplies
±12V to 18V DC supplies, RoHS-compliant
±12V to 18V DC supplies, Hermetic seal
Three-bit logic control
Three-bit logic control, RoHS-compliant
Three-bit logic control, Hermetic seal
Three-bit logic control, ±5V DC supplies
Add “-3-5-RC” suffix
Three-bit logic control, ±5V DC supplies, RoHS-compliant
Add
Add
Add
Add
Three-bit
Three-bit
Three-bit
Three-bit
“-3-5-H” suffix
“-3-12” suffix
“-3-12-RC” suffix
“-3-12-H” suffix
OUTLINE CASE STYLE S6
logic
logic
logic
logic
control,
control,
control,
control,
±5V DC
±12V to
±12V to
±12V to
supplies, Hermetic seal
18V DC supplies
18V DC supplies, RoHS-compliant
18V DC supplies, Hermetic seal
OUTLINE CASE STYLE S6-3
0.38
REF.
1.50
2X
Ø0.100 THRU
MOUNTING HOLE
0.75
0.38
REF.
1.50
2X
Ø0.100 THRU
MOUNTING HOLE
0.75
0.31
TYP
MODEL NUMBER
MODEL NUMBER
J4
1.50
J6
J2
45°
TYP
0.75
J7
J1
9X
Ø0.020 X 0.15 LG
SOLDER PIN
0.10
0.07
0.560
VIEW A-A
0.055
(8) PLCS.
0.75
J7
9X
Ø0.020 X 0.15 LG
SOLDER PIN
0.07
0.28
0.12
A
7X
0.35
CL
1.50
J6
J1
0.28
0.12
1.360
DC:
WWYY
SN:
0000
N
N /
+ / C
N V C
G /
E C
- 3
EV
E1 2
E
E 6
+ 5
E V
G 4
E
- 3
EV
E1 2
ACC
1.360
DC:
WWYY
SN:
0000
J5
J3
A
ACC
J2
45°
TYP
J4
J5
J3
A
0.10
0.31
TYP
SMA FEMALE,
FIELD REPLACEABLE
(Ø0.015 X 0.08 PIN)
(7) PLCS.
0.560
A
0.60
7X
0.35
0.055
(8) PLCS.
CL
SMA FEMALE,
FIELD REPLACEABLE
(Ø0.015 X 0.08 PIN)
(7) PLCS.
VIEW A-A
w w w. a e r o f l e x . c o m / a c c
0.60
|
1 - 7 3 2 - 4 6 0 - 0 2 12
| 43
Switches
Transfer Switches
The XF series of PIN diode transfer switches span the frequency range of 10MHz to
18GHz. The switches are available in a wide variety of standard frequency ranges from
cost-effective narrowband to high-performance broadband. Each switch incorporates a
TTL-compatible driver for convenient system integration and operates from +5V and -12V
to -18V DC power supplies. All switches incorporate DC blocks at the RF ports. Standard
screened switches incorporate epoxy sealed lids and undergo a stringent yet cost
effective screening cycle. The switches are also available with hermetic seal and high-rel
screening for military and aerospace applications.
Applications
cations
• EW Systems
• Communications Systems
• Antenna Selectors
• Test Equipment
• Electronic Simulators
• Filter Selectors
TRANSFER SWITCHES
Frequency
Range
(GHz)
Part
Number
Insertion
Loss
(dB max)
VSWR
(max)
Isolation
(dB min)
Switching
Speed
(nsec max)
MAX RF
(W CW)
0.01 – 0.1
0.01 – 0.5
0.01 – 1
0.01 – 2
0.01 – 4
0.01 – 6
0.1 – 0.5
0.1 – 1
0.1 – 2
0.1 – 4
0.1 – 8
0.1 – 10
0.5 – 1
0.5 – 2
0.5 – 4
0.5 – 6
0.5 – 12
0.5 – 18
1–2
1–4
1–8
1 – 10
1 – 12
1 – 14
1 – 18
2–4
2–6
2–8
2 – 10
2 – 12
2 – 16
2 – 18
4–8
4 – 10
4 – 12
4 – 16
4 – 18
6 – 10
6 – 12
6 – 18
8 – 10
8 – 12
8 – 18
10 – 18
12 – 18
XFH1
XFH2
XFH3
XFH4
XFH5
XFH6
XFV1
XFV2
XFV3
XFV4
XFV5
XFV6
XFU1
XFU2
XFU3
XFU4
XFU5
XFU6
XFL1
XFL2
XFL3
XFL4
XFL5
XFL6
XFL7
XFS1
XFS2
XFS3
XFS4
XFS5
XFS6
XFS7
XFC1
XFC2
XFC3
XFC4
XFC5
XFC6
XFC7
XFC8
XFX1
XFX2
XFX3
XFK1
XFK2
0.8
1.0
1.3
1.9
2.7
3.0
1.0
1.3
1.9
2.7
3.4
3.7
1.1
1.5
2.1
2.4
2.8
3.3
1.0
1.3
2.0
2.1
2.2
2.6
3.1
1.2
1.5
1.9
2.0
2.2
2.9
3.1
1.9
2.1
2.2
2.9
3.0
2.1
2.2
3.0
2.1
2.2
3.0
3.0
3.0
1.5
1.5
1.5
1.6
1.8
1.9
1.5
1.5
1.6
1.8
2.0
2.0
1.5
1.6
1.8
1.9
2.0
2.0
1.5
1.6
1.8
2.0
2.0
2.0
2.0
1.6
1.7
1.8
1.8
1.9
2.0
2.0
1.6
1.7
1.8
2.0
2.0
1.7
1.8
2.0
1.7
1.8
2.0
2.0
2.0
80
80
80
80
80
80
80
80
80
80
75
75
80
80
75
75
70
65
80
80
80
75
70
70
65
75
75
75
70
70
65
65
75
70
70
65
65
70
70
65
70
70
65
65
65
250
250
250
250
250
250
250
250
250
250
250
250
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0.5
0.5
1
1
1
1
0.5
0.5
0.5
1
1
1
1
0.5
0.5
0.5
1
1
0.5
0.5
0.5
1
0.5
0.5
0.5
0.5
0.5
0.5
0.5
44 | w w w . a e r o f l e x . c o m / a c c | 1 - 7 3 2 - 4 6 0 - 0 2 12
Switches
Transfer Switches
NOTES
PART NUMBER ORDERING INFORMATION
DC Bias
(Standard)
DC Bias
(-5 option)
DC Bias
(-12 option)
Control
Standar
Add
Add
Add
Add
Add
Add
Add
Add
+5V ±0.5V @ 100mA max
-15V ±3V @ 50mA max
+5V ±0.5V @ 120mA max
-5V ±0.5V @ 60mA max
+5V ±0.5V @ 100mA max
-15V ±3V @ 50mA max
TTL 0 = Low Loss
TTL 1 = Isolation
J1-J2, J3-J4 Low Loss
J1-J4, J2-J3 Isolation
J1-J4, J2-J3 Low Loss
J1-J2, J3-J4 Isolation
Switching speed is defined as 50%TTL to 90% (t-on) and 50%TTL to
10%RF (t-off)
“-RC” suffix
“-H” suffix
“-5” suffix
“-5-RC” suffix
“-5-H” suffix
“-12” suffix
“-12-RC” suffix
“-12-H” suffix
RoHS-compliant
Hermetic seal
±5V DC supplies
±5V DC supplies, RoHS-compliant
±5V DC supplies, Hermetic seal
±12V to 18V DC supplies
±12V to 18V DC supplies, RoHS-compliant
±12V to 18V DC supplies, Hermetic seal
*For Screening Specifications , Environmental specifications and Custom
Options please refer to page 46.
MECHANICAL SPECIFICATIONS
Case Styles
Finish
Connectors
Bias & Control Pins
Weight
Mounting
XF Outline
Gold plate per MIL-G-45204, Chem film per MIL-C-5541
SMA Female per MIL-C-39012
ø0.02” x 0.15” long
35g max
ø0.10” through holes (4) places
OUTLINE CASE STYLE XF
0.40
0.40
0.20
0.15
TYP.
0.15
TYP.
1.20
1.000
0.10
Ø0.020 X 0.15 LG
SOLDER PIN
(6) PLCS.
MODEL NUMBER
0.10
+V
J1 -V
0.60
(2) PLCS.
G
ACC
1.20
1.000
J4
J2
SN:
0000
DC:
WWYY
J3
E1
SMA FEMALE
(4) PLCS.
Ø0.100 THRU
MOUNTING HOLE
(4) PLCS.
0.60
(2) PLCS.
0.38
REF
0.40
w w w. a e r o f l e x . c o m / a c c
|
1 - 7 3 2 - 4 6 0 - 0 2 12
| 45
Switches
Ultra Broadband Pin Diode Switches
The SWM Series pin diode switches operate over the full range 0.5GHz to 18GHz in a
single unit. Aeroflex Control Components has integrated microstrip soft substrate with
thick film hybrid drivers. The housing is epoxy sealed to meet the gross leak requirements
of MIL-STD-883. The SMA connectors are removable.
REFLECTIVE SWITCHES
Frequency
Range (GHz)
ABSORPTIVE SWITCHES
Part
Number
Insertion Loss
(dB max)
VSWR
(max)
On Only
Isolation
(dB min)
Part
Number
0.5 - 18
SWM-1100
2.6
1.8:1
50
SWM-1100A
0.5 - 18
0.5 - 18
0.5 - 18
SWM-1200
SWM-1300
SWM-1400
2.5
3.0
3.0
1.8:1
2:1
2:1
50
60
60
SWM-1200A
SWM-1300A
SWM-1400A
Insertion Loss
(dB max)
VSWR
(max)
Isolation
(dB min)
Switching MAX RF
Speed
(W CW)
(nsec max)
2.6
1.8:1
50
100
1
3.0
3.5
3.7
2.0:1
2.0:1
2.0:1
50
60
60
100
100
100
1
1
1
ELECTRICAL SPECIFICATIONS
DC Voltage (SWM-1100)
±5V ±0.5V @ ±75mA max
DC Voltage (SWM-1200)
±5V ±0.5V @ ±100mA max
DC Voltage (SWM-1300)
±5V ±0.5V @ ±125mA max
DC Voltage (SWM-1400)
±5V ±0.5V @ ±175mA max
Logic
TTL "0" enables thru path
Switching speed is defined as 50%TTL to 90% (t-on) and 50%TTL to 10%RF (t-off)
*GENERAL SPECIFICATIONS AND NOTES
ENVIRONMENTAL SPECIFICATIONS
SCREENING
MIL-E-5400, MIL-STD-202,
Operating Temp
Storage Temp
Humidity
Shock
Altitude
Vibration
Thermal Shock
Temperature Cycle
Internal Visual per MIL-STD-883, Method 2017
Temperature Cycle: -65°C to +100°C, 10 cycles
Hermetically-sealed switches are fine and gross leak checked per
MIL-STD-883, Method 1014
Optional High-Rel screening available upon request. Contact the factory to discuss
your screening requirements
MIL-E-16400
-55°C to +85°C
-65°C to +125°C
MIL-STD-202F, M103, Cond B
MIL-STD-202F, M213, Cond B
MIL-STD-202F, M105, Cond B
MIL-STD-202F, M204, Cond B
MIL-STD-202F, M107, Cond A
MIL-STD-202F, M105C, Cond D
46 | w w w . a e r o f l e x . c o m / a c c | 1 - 7 3 2 - 4 6 0 - 0 2 12
CUSTOM OPTIONS – CONTACT FACTORY
Gray epoxy paint per MIL-C-22750
Video transient suppression
GPO connectors
ECL logic input
Phase and amplitude matching
Other frequency ranges available from 1MHz to 26GHz
Reversed logic
Available without SMA connectors for drop-in applications
High-Rel screening
Switches
Ultra Broadband Pin Diode Switches
OUTLINE CASE STYLE SWM-1100
OUTLINE CASE STYLE SWM-1200
1.00
1.00
.210
.210
.38
2 PLS
.50
.40
.40
.06
.38
3 PLS
.17
.28
.06
.210
±.03
.06
.210
J3 64537
SWM-1200
J2
.017 DIA PIN
4 PLS
.880
HAND STAMP
DATE CODE
XXXX
.89
-5V
.16
.17
J1
LOGIC
.078 DIA THRU
6 MTG HOLES
.28
HAND STAMP
DATE CODE
GND
+5V
XXXX
J1
LOGIC
-5V
GND
+5V
J2 64537
SWM-1100A
.89
.078 DIA THRU
6 MTG HOLES
.16 ±.03
.06
.017 DIA PIN
4 PLS
.880
.24
.09 TYP
.21 MAX
LOGIC
0
1
.50
J1-J2
ON
OFF
.24
.09 TYP
.21 MAX
.62
LOGIC
0
1
.50
.77
.62
J1-J2
ON
OFF
J1-J3
OFF
ON
.77
OUTLINE CASE STYLE SWM-1300
OUTLINE CASE STYLE SWM-1400
1.20
1.20
.200
TYP
.200
TYP
.60
.60
.44
.44
.06
.06
HAND STAMP
DATE CODE
HAND STAMP
DATE CODE
.06
.30
J5
J2
.20
.60
1.20
.16 ±.03
.078 DIA THRU
10 MTG HOLES
.017 DIA
6 PLS
INPUT
J1
.30
64537
SWM-1400
.600
.60
J4
LOGIC 5
LOGIC 4
-5 V
+5 V
GND
LOGIC 3
LOGIC 2
J3
LOGIC 4
-5 V
+5 V
GND
LOGIC 3
LOGIC 2
J3
.600
J4
1.20
INPUT
J1
64537
SWM-1300
.06
J2
.20
.16 ±.03
.38
TYP
.078 DIA THRU
10 MTG HOLES
.017 DIA
6 PLS
.38
TYP
.40
.40
.24 MAX
.15 TYP
.10 5 PLS
.50
LOGIC
L2
L3
L4
L5
ON
J1-J2
J1-J3
J1-J4
J1-J5
OFF
J3,J4,J5
J2,J4,J5
J2,J3,J5
J2,J3,J4
.24 MAX
.15 TYP
.10 5 PLS
.50
w w w. a e r o f l e x . c o m / a c c
|
1 - 7 3 2 - 4 6 0 - 0 2 12
| 47
Switches
High Power T/R Switches
The ACC series of High Power T/R diode switches span the frequency range of 5MHz
Hz to
6GHz and are available with absorptive output on the RX port and reflective port on
n the
TX side. The switches are available in a wide variety of standard frequency ranges. Each
switch incorporates a TTL-compatible driver for convenient system integration and
operates from +5V to +12v and -50V to -150V DC power supplies (depending on RF
power requirements). All switches incorporate DC blocks at the RF ports. Some switches
are also available with hermetic seal and high-rel screening for military and aerospace
applications.
HIGH POWER T/R SWITCHES
Insertion Loss
Frequency Part Number (dB max)
Range (GHz)
RX Mode
.005 - .05
.05 - 0.5
.5 - 1.0
1.0 - 2.0
2.0 - 4.0
2.0 - 6.0
ACSW-5729
ACSW-5730
ACSW-5731
ACSW-5732
ACSW-5733
ACSW-5734
(dB max)
TX Mode
1.2
1.2
0.8
0.8
2.0
1.5
1.0
1.0
0.6
0.4
0.5
0.5
VSWR
(Max)
(Max)
RX Mode TX Mode
1.8:1
1.8:1
1.75:1
1.75:1
2.0:1
2.0:1
1.8:1
1.8:1
1.75:1
1.75:1
1.5:1
1.5:1
Isolation
(dB max)
RX Mode
(dB min)
TX Mode
60
60
60
60
70
1
70 / 50
20
20
20
20
17
15
Switching RF POWER Outline
Speed
MAX RF2
(μsec max)
(W CW )
10
10
10
10
8
8
50
50
100
100
100
100
A
A
A
A
B
B
Plating
1
1
1
2
2
2
NOTES
1.
2.
70dB @ 2 - 4 GHz, 50dB @ 4 - 6 GHz
Units are cold switching.
ELECTRICAL SPECIFICATIONS
DC Voltage
DC Voltage
TTL 0
TTL 1
+12V ±0.5V @ 100mA max
-100V ±3V @ 10mA max
TX MODE
RX MODE
J1 = COMMON
J2 = RX
J3 = TX
Switching speed is defined as 50%TTL to 90% (t-on) and 50%TTL to 10%RF (t-off)
MECHANICAL SPECIFICATIONS
Finish
Connectors
Bias & Control
1. Electroless Nickel per AMS2404E, Class 3, 250u inches Min.
2. Gold Plate per MIL-C-45204 Type III Grade A, 15 - 20 u inches over 2 Electrodes Nickel per MIL-C-26074 CLASS 3,
250 u inches Min.
SMA FEMALE
MINATURE D TYPE
*For Screening Specifications , Environmental specifications and Custom Options please refer to page 46.
48 | w w w . a e r o f l e x . c o m / a c c | 1 - 7 3 2 - 4 6 0 - 0 2 12
Switches
High Power T/R Switches
OUTLINE CASE STYLE A
OUTLINE CASE STYLE B
CONNECTOR I/O CHART
PIN#
1
2
3
4
5
6
7
8
9
3X SMA
FEMALE
0.86
3X 0.36
DESCRIPTION
TTL
GND
+12V
NC
-100V
NC
NC
NC
NC
3X SMA
FEMALE
0.86
3X 0.36
2.00
3X 0.38
0.06 TYP
1.72
3X 0.38
0.06 TYP
2X 0.63
J1
J1
J3
CONTROL COMPONENTS
J3
2X 0.63
CONTROL COMPONENTS
J2
2X 1.520
1.72
J2
64537
2X 1.520
1.72
64537
S/N
4X 0.130
THRU
S/N
0.36
TYP
J4
0.36
TYP
J4
4X Ø0.130
THRU
0.185 MAX
2X 0.10
2X 0.10
2X 1.800
0.185 MAX.
2X 0.10
2X 0.10
2X 2-56X.135 MIN DP.
2X 1.520
2X 2-56X.135 MIN DP.
0.61
2X 0.31
0.718
0.61
0.565
PIN #1
2X 0.31
0.58
MICRO-D PLUG
9 PIN
0.565
PIN #1
MICRO-D PLUG
9 PIN
w w w. a e r o f l e x . c o m / a c c
|
1 - 7 3 2 - 4 6 0 - 0 2 12
| 49
Attenuators
Standard Digital Attenuators
Aeroflex Control Components’ line of switched-bit PIN diode digital attenuators offers
precision, reliability, and repeatability for the most demanding applications. The AT series
digital attenuators are available in convenient binary 4-, 5-, and 6-bit configurations with
0.5dB resolution and up to 63dB total attenuation. The attenuators require only a single
+5V DC power supply and feature TTL-compatible control logic. All switches incorporate
DC blocks at the RF ports. Standard screened devices incorporate epoxy sealed lids and
undergo a stringent yet cost effective screening cycle. The attenuators are also available
with hermetic seal and high-rel screening for mil and space applications.
Applications
• EW Systems
• Communications Systems
• Automatic Gain Control
• Test Equipment
• Electronic Simulators
• Leveling Circuits
STANDARD DIGITAL ATTENUATORS
Frequency
Range
(GHz)
Part
Number
Type
Total
Attenuation
(dB)
LSB
(dB)
MSB
(dB)
Insertion
Loss
(dB max)
VSWR
(max)
1–2
ATL4A
ATL4B
ATL4C
ATL4D
ATL5A
ATL5B
ATL5C
ATL6A
ATL6B
4-BIT
4-BIT
4-BIT
4-BIT
5-BIT
5-BIT
5-BIT
6-BIT
6-BIT
7.5
15
30
60
15.5
31
62
31.5
63
0.5
1
2
4
0.5
1
2
0.5
1
4
8
16
32
8
16
32
16
32
2.5
2.5
2.5
2.5
2.8
2.8
2.8
3.3
3.3
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.6
1.6
2 –4
ATS4A
ATS4B
ATS4C
ATS4D
ATS5A
ATS5B
ATS5C
ATS6A
ATS6B
4-BIT
4-BIT
4-BIT
4-BIT
5-BIT
5-BIT
5-BIT
6-BIT
6-BIT
7.5
15
30
60
15.5
31
62
31.5
63
0.5
1
2
4
0.5
1
2
0.5
1
4
8
16
32
8
16
32
16
32
2.9
2.9
2.9
2.9
3.1
3.1
3.1
3.7
3.7
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.7
1.7
4–6
ATC4A
ATC4B
ATC4C
ATC4D
ATC5A
ATC5B
ATC5C
ATC6A
ATC6B
4-BIT
4-BIT
4-BIT
4-BIT
5-BIT
5-BIT
5-BIT
6-BIT
6-BIT
7.5
15
30
60
15.5
31
62
31.5
63
0.5
1
2
4
0.5
1
2
0.5
1
4
8
16
32
8
16
32
16
32
3.2
3.2
3.2
3.2
3.5
3.5
3.5
4.0
4.0
1.7
1.7
1.7
1.7
1.7
1.8
1.8
2.0
2.0
CONTROL LOGIC TABLE
Part Number
E1
E2
E3
E4
E5
E6
ATL4A / ATS4A / ATC4A
ATL4B / ATS4B / ATC4B
ATL4C / ATS4C / ATC4C
ATL4D / ATS4D / ATC4D
ATL5A / ATS5A / ATC5A
ATL5B / ATS5B / ATC5B
ATL5C / ATS5C / ATC5C
ATL6A / ATS6A / ATC6A
ATL6B / ATS6B / ATC6B
0.5dB
1dB
2dB
4dB
0.5dB
1dB
2dB
0.5dB
1dB
1dB
2dB
4dB
8dB
1dB
2dB
4dB
1dB
2dB
2dB
4dB
8dB
16dB
2dB
4dB
8dB
2dB
4dB
4dB
8dB
16dB
32dB
4dB
8dB
16dB
4dB
8dB
N/C
N/C
N/C
N/C
8dB
16dB
32dB
8dB
16dB
N/C
N/C
N/C
N/C
N/C
N/C
N/C
16dB
32dB
50 | w w w . a e r o f l e x . c o m / a c c | 1 - 7 3 2 - 4 6 0 - 0 2 12
Attenuators
Standard Digital Attenuators
ADDITIONAL ELECTRICAL SPECIFICATIONS
MECHANICAL SPECIFICATIONS
DC Bias:
Case Style
Finish
Connectors
Bias & Control Pins
Weight
Mounting
Switching Speed:
Operating RF Power:
Attenuation Accuracy:
Attenuation Flatness:
Logic Control:
+5V ±0.5V @ 130mA max (4-Bit models)
+5V ±0.5V @ 160mA max (5-Bit models)
+5V ±0.5V @ 190mA max (6-Bit models)
250nsec max (50%TTL-90%RF)
75nsec max (50%TTL-10%RF)
175nsec max (10%RF-90%RF)
25nsec max (90%RF-10%RF)
1W CW max
+/-0.4dB (0-20dB attenuation)
+/-2% (above 20dB attenuation)
+/-0.5dB max
TTL 0 = Low Loss
TTL 1 = Attenuation
ENVIRONMENTAL SPECIFICATIONS
MIL-E-5400, MIL-STD-202,
Operating Temp
Storage Temp
Humidity
Shock
Altitude
Vibration
Thermal Shock
Temperature Cycle
MIL-E-16400
-55°C to +85°C
-65°C to +125°C
MIL-STD-202F, M103, Cond B
MIL-STD-202F, M213, Cond B
MIL-STD-202F, M105, Cond B
MIL-STD-202F, M204, Cond B
MIL-STD-202F, M107, Cond A
MIL-STD-202F, M105C, Cond D
AT Outline
Gold plate per MIL-G-45204
SMA Female per MIL-C-39012
ø0.02” x 0.15” long
19g max
ø0.10” through holes (4) places
SCREENING
Internal Visual per MIL-STD-883, Method 2017
Temperature Cycle: -65°C to +100°C, 10 cycles
Hermetically-sealed attenuators are fine and gross leak checked per
MIL-STD-883, Method 1014
Optional High-Rel screening available upon request. Contact the factory
to discuss your screening requirements
PART NUMBER ORDERING INFORMATION
ATxxx: Standard version
ATxxx-RC: RoHS-compliant
ATxxx-H: Hermetic seal
CUSTOM OPTIONS – CONTACT FACTORY
Gray epoxy paint per MIL-C-22750
Video transient suppression
GPO connectors
ECL logic input
Phase and amplitude tracking
Other frequency ranges available from 1MHz to 26GHz
Reversed logic
Available without SMA connectors for drop-in applications
High rel screening
OUTLINE CASE STYLE AT
2.30
2.140
0.080
0.20
0.10
0.08
ATS6B
ACC
0.690
J1
SN:
0000
DC:
WWYY
GND
+5V
E5
E4
E3
E2
E1
E6
0.85
0.425
Ø0.020 X 0.15 LG
SOLDER PIN
(8) PLCS.
J2
SMA FEMALE
(2) PLCS.
Ø0.100 THRU
(4) PLCS.
0.38
(REF)
0.10
(8) PLCS.
0.80
0.10
(7) PLCS.
w w w. a e r o f l e x . c o m / a c c
|
1 - 7 3 2 - 4 6 0 - 0 2 12
| 51
Attenuators
Pin Diode Attenuators
The GT series PIN Diode attenuator is an 8 or 10 bit digitally controlled voltage variable
attenuator optimized for low insertion loss while maintaining maximum attenuation range
at best attenuation flatness. Using new linearization techniques and state of the art
manufacturing practices, this attenuator family has unsurpassed attenuation linearity over
temperature. Linearization over temperature is achieved using the latest microcontroller
architecture.
With the highest performance density and most compact package available, this product
family is ideally suited for high performance ESM, ECM, Instrumentation, Simulation and
Synthesizer applications.
Applications
• Unsurpassed Attenuation Linearity over
Frequency & Temperature
• 8 or 10 bit digital control
• Smooth transition between states
• Available in 32 or 64 dB Attenuation
range
• Remotely programmable parallel or
serial control interface
PIN DIODE ATTENUATORS
Part
Number
Frequency
Range
(GHz)
Type
Attenuation Switching
Range
Speed
(dB)
(usec)
GT-R502-32
GT-R502-64
0.5 -2.0
0.5 -2.0
8-BIT
8-BIT
0 - 32
0 - 64
2.5
2.5
GT-0206-32
GT-0206-64
2–6
2-6
8-BIT
8-BIT
0 - 32
0 - 64
2.5
2.5
GT-0218-32
GT-0218-64
2 – 18
2 - 18
8-BIT
8-BIT
0 - 32
0 - 64
2.5
2.5
GT-0618-32
GT-0618-64
6 - 18
6 - 18
8-BIT
8-BIT
0 - 32
0 - 64
2.5
2.5
Attenuation
Flatness
(dB)
Step
Size
LSB
(dB)
P1dB
Compression
Point
(dBm)
Insertion
Loss
(dB max)
VSWR
(max)
±1.5
±1.5 to 32
±2.5 to 64
±1.5
±1.5 to 32
±2.5 to 64
±1.5
±3.25 to 32
±4.25 to 64
±2.25
±2.25 to 32
±3.75 to 64
0.125
0.250
10
10
3.5
3.5
2.0:1
2.0:1
0.125
0.250
10
10
2.3
2.3
2.0:1
2.0:1
0.125
0.250
10
10
6.5
6.5
2.0:1
2.0:1
0.125
0.250
10
10
3.3
3.3
2.0:1
2.0:1
CONTROL LOGIC TABLE
Bit Size
0.25
0.5
1
2
4
8
16
32
Attenuation State
Logic
Logic
Logic
Logic
Logic
Logic
Logic
Logic
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
1
0
1
0
1
0
0
0
1
0
0
1
1
0
0
1
1
0
1
0
1
1
0
1
1
0
0
1
1
0
0
1
1
0
0
0
0
1
1
1
1
Ref (Insertion Loss)
10 dB
20 dB
30 dB
40 dB
50 dB
60 dB
63.75 dB
CONNECTOR WIRING CHART
PIN
NOTES:
1
FUNCTION
RETURN
PIN
12
FUNCTION
N/C (b9*)
2
3
4
5
6
7
8
9
10
11
STROBE
b0
b1
b2
b3
b4
b5
b6
b7
N/C (b8*)
13
N/C
14
N/C
15
+V
16
RETURN
17
-V
18
N/C
19
RETURN
20
N/C
21
N/C
*Used on 10 bit option
52 | w w w . a e r o f l e x . c o m / a c c | 1 - 7 3 2 - 4 6 0 - 0 2 12
1.
2.
3.
4.
Mean Attenuation = average attenuation over the frequency
range at constant command.
Measurements at 0 dBm input power unless otherwise noted.
Attenuation range must be specified by adding a “32 or 64” to
the end of the part number (eg. GT061832)
Standard Control Interface is 8 bit. Control interface is also
available in 10 bit interface. Add suffix (10) after attenuation
range suffix. Other custom options available upon request.
Attenuators
Pin Diode Attenuators
ADDITIONAL ELECTRICAL SPECIFICATIONS
SCREENING
DC Supply:
Internal Visual per MIL-STD-883, Method 2017
Temperature Cycle -65°C to +100°C, 10 cycles
Hermetically-sealed attenuators are fine and gross leak checked per
MIL-STD-883, Method 1014; RF side only
Optional High-Rel screening available upon request
Contact the factory to discuss your screening requirements
+5V ±0.5V @ +275mA
-5V ±0.5V @ -50mA
8 Bits command
Control:
1 Strobe line
Positive edge latched
Logic Levels:
TTL/HMOS
Attenuation Accuracy:
+/-0.15 dB or +/-1.5% whichever is greater
Attenuation Stability over +/-0.025 dB/°C
Temperature:
GT
-0206
-64
-10
-F
-H
ENVIRONMENTAL SPECIFICATIONS
MIL-E-5400, MIL-STD-202,
Operating Temp
Storage Temp
Humidity
Shock
Altitude
Vibration
Thermal Shock
Temperature Cycle
MIL-E-16400
-30°C to +70°C
-55°C to +125°C
MIL-STD-202F, M103, Cond B
MIL-STD-202F, M213, Cond B
MIL-STD-202F, M105, Cond B
MIL-STD-202F, M204, Cond B
MIL-STD-202F, M107, Cond A
MIL-STD-202F, M105C, Cond D
Series
Frequency Range
Attenuation Range (32) or (64)
10 bits
Free Running
Hemetic Seal
CUSTOM OPTIONS – CONTACT FACTORY
Gray epoxy paint per MIL-C-22750
Video transient suppression
GPO connectors
ECL logic input
Phase and amplitude tracking
Other frequency ranges available from 1MHz to 26GHz
Reversed logic
Available without SMA connectors for drop-in applications
High-Rel screening
MECHANICAL SPECIFICATIONS
Case Style
Finish
Connectors
Bias & Control Pins
Weight
Mounting
PART NUMBER ORDERING INFORMATION
GT Outline
Gold plate per MIL-G-45204
SMA Female per MIL-C-39012
ø0.02” x 0.15” long
90g max
ø0.12” through holes (4) places
OUTLINE CASE STYLE GT (Figure 1)
OUTLINE CASE STYLE GT (Figure 2)
2.30
2.30
2.05
2.05
.13
.13
.10
.10
.50
.63
J1
1.00
.80
J2
1.25
J1
CONTROL COMPONENTS
64537
J2
1.05
SERNO
GT-R502-64
J3
J3
.38
2 PLS
.12 DIA THRU
4 MTG HOLES
.38
2 PLS
SMA FEMALE CONNECTOR
PER MIL-PRF-39012
2 PLS
SMA FEMALE CONNECTOR
PER MIL-PRF-39012
2 PLS
.75
12
.49
1
PIN 1
.12 DIA THRU
4 MTG HOLES
13
2
14
3
15
4
16
5
17
6
18
7
19
8
20
9
.75
21
10
11
12
.50
MICRO-D 21 PIN
SOCKET CONNECTOR
1
MOUNTING SURFACE
TO BE FREE OF PAINT
13
2
14
3
15
4
16
5
17
6
18
7
19
8
20
9
21
10
MICRO-D 21 PIN
SOCKET CONNECTOR
PIN 1
w w w. a e r o f l e x . c o m / a c c
11
|
1 - 7 3 2 - 4 6 0 - 0 2 12
| 53
Phase Shifters
Analog Diode Phase Shifters
Features
An Analog Phase Shifter Continuously Changes the phase of a microwave signal by
varying a DC voltage. Since the DC voltage applied to the diode is reverse bias, the
current drain is negligible (typically less than 10A). A Balanced stripline configuration
keeps the VSWR and amplitude ripple to a minimum for all values of phase.
• Octave bands up to 18GHz
• Fast Phase responce as low as 10nS
• RF power operation 10mW peak/CW,
RF power survival 100mW peak/CW
• Bias connection using pin or connector
options
• Custom configurations available
CONTINOUSLY VARIABLE
Frequency
Range
(GHz)
Part
Number
Phase
Shift
(Degrees)
Insertion
Loss
Max (dB)
0.25 - 0.5
0.5 - 1.0
0.5 - 1.0
1-2
2-4
2-4
4-8
4-8
7 - 12
8 - 12
8 - 10
PQ-17
PQ-27
PQ-28
PQ-34
PQ-44
PQ-45
PQ-59
PQ-60
PQ-66
PQ-72
PQ-73
360
180
360
360
180
360
40
360
360
60
180
4.5
4
5
5.5
4
6
1.25
8
14
2
6
Amplitude
Ripple
Max
(+/-dB)
VSWR
Max
1.25
0.4
1.25
1.5
0.5
1.5
0.3
1.5
2
0.5
1
2
1.75
2
2
1.75
2
Outline
10
3
4
8
3
5
2
9
9
2
7
1.75
2
2.5
2
2
MECHANICAL OUTLINES
Outline
A'
B'
C'
D'
E'
F'
G'
1
2
3
4
5
6
7
8
9
10
2.75
1.25
5.00
7.75
6.50
2.00
3.00
6.50
5.00
7.75
2.25
2.00
2.00
2.50
2.00
2.00
2.00
2.50
2.00
2.50
1.38
0.63
N/A
N/A
N/A
1.00
1.50
N/A
N/A
N/A
2.05
1.80
1.80
2.30
1.80
1.80
1.80
2.30
1.80
2.30
2.25
0.75
4.50
7.25
6.00
1.50
2.50
6.00
4.50
7.25
0.53
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.50
0.75
3 PLS
3 PLS
4 PLS
4 PLS
4 PLS
3 PLS
3 PLS
4 PLS
4 PLS
4 PLS
ENVIRONMENTAL SPECIFICATIONS
NOTES
MIL-E-5400, MIL-STD-202,
Operating Temp
Storage Temp
Humidity
Shock
Altitude
Vibration
Thermal Shock
Temperature Cycle
1.
2.
MIL-E-16400
-30°C to +70°C
-55°C to +125°C
MIL-STD-202F, M103, Cond B
MIL-STD-202F, M213, Cond B
MIL-STD-202F, M105, Cond B
MIL-STD-202F, M204, Cond B
MIL-STD-202F, M107, Cond A
MIL-STD-202F, M105C, Cond D
3.
4.
SCREENING
Internal Visual per MIL-STD-883,
Method 2017
Temperature Cycle: -65°C to +100°C, 10 cycles
Hermetically-sealed phase shifters are fine and gross leak checked per
MIL-STD-883, Method 1014
Optional High-Rel screening available upon request. Contact the factory
to discuss your screening requirements
54 | w w w . a e r o f l e x . c o m / a c c | 1 - 7 3 2 - 4 6 0 - 0 2 12
Monotonicity is Guaranteed.
The Phase shift varies with frequency at any voltage setting. This
variation, referenced to 0° at logic 0 for each frequency, is
approximately ±15% for octave models, 10% for models with
25% bandwidth, and ±7.5% for models with 10% bandwidth.
Phase flatness of the QQ-65 & QQ-74 is ±25%.
A Connector, (SMA Female) is available in place of the bias pin
at no extra charge. This will be placed at the center of the
surface marked "H" on the drawing. This is the .38 x "A"
surface. If a SMA Female is desired, add the suffix "C" to the
model number (e.g., PQ-45C)
Linearization models available, call for outline and details.
Phase Shifters
Analog Diode Phase Shifters
OUTLINE CASE STYLE PQ
ADDITIONAL ELECTRICAL SPECIFICATIONS
DC Supply:
`B'
`D'
Case Style
Connectors
Control Connector
Bias & Control Pins
Mounting
`E'
.125 DIA
THRU `G'
MTG HOLES `C'
.25
RF
`A'
MECHANICAL SPECIFICATIONS
BIAS
GND
`H' SURFACE
RF
`F'
.38
2 PLS
+5V ±0.5V @ +275mA
-5V ±0.5V @ -50mA
8 Bits command
Control:
1 Strobe line
Positive edge latched
Logic Levels:
TTL/HMOS
Attenuation Accuracy:
+/-0.15 dB or +/-1.5% whichever is greater
Attenuation Stability over +/-0.025 dB/°C
Temperature:
BIAS
PIN
GROUND
.10
PQ Outline
SMA Female per MIL-C-39012
Micro-D 21 Pin
ø0.02” x 0.15” long
ø0.10” through holes (4) places
CUSTOM OPTIONS – CONTACT FACTORY
Gray epoxy paint per MIL-C-22750
Video transient suppression
GPO connectors
ECL logic input
Phase and amplitude tracking
Other frequency ranges available from 1MHz to 26GHz
Reversed logic
Available without SMA connectors for drop-in applications
High-Rel screening
.40
w w w. a e r o f l e x . c o m / a c c
|
1 - 7 3 2 - 4 6 0 - 0 2 12
| 55
Phase Shifters
Digitally Controlled Analog Phase Shifters
Aeroflex Control Components’ digitally controlled Phase Shifters vary the phase of a
Microwave signal in responce to a TTL compatible logic input signal . The unit Consists
of an analog phase shifter, series PQ, plus a digital to analog converter. A balanced Strip
line configuration keeps the VSWR and amplitude change to a minimum for all values of
phase. Standard units operate with 8 BITS allowing 256 discrete values of phase. if 10
BITS are required add -10 to the model number (e.g., QQ-34-10) if 12 BITS are required
add -12 to the model number (e.g., QQ-34-12)
Features
• 8 bit Digital logic standard
• Octave bands up to 18 GHz
• RF power operation 10mW peak/CW,
RF power survival 100mW peak/CW
• Custom configurations available
8, 10 OR 12 BITS
Frequency
Range
(GHz)
Part
Number
Phase
Shift
(Degrees)
Insertion
Loss
Max (dB)
0.25 - 0.5
0.5 - 1.0
0.5 - 1.0
1-2
2-4
2-4
4-8
7 - 12
8 - 10
QQ-17
QQ-27
QQ-28
QQ-34
QQ-44
QQ-45
QQ-60
QQ-66
QQ-73
360
180
360
360
180
360
360
360
180
4.5
4
5
5.5
4
6
8
14
6
Amplitude
Ripple
Max
(+/-dB)
VSWR
Max
1.25
0.4
1.25
1.5
0.5
1.5
1.5
2
1
2
1.75
2
2
1.75
2
2
2.5
2
Outline
2
1
5
5
6
3
1
1
4
MECHANICAL OUTLINES
Outline
A'
B'
C'
D'
E'
F'
G'
1
2
3
4
5
6
5.00
7.75
6.50
3.00
7.75
5.50
2.00
2.50
2.00
2.00
2.50
2.00
N/A
N/A
N/A
1.50
N/A
N/A
1.80
2.30
1.80
1.80
2.30
1.80
4.50
7.25
6.00
2.50
7.25
4.50
0.50
0.75
0.25
0.30
0.25
0.25
4 PLS
4 PLS
4 PLS
3 PLS
4 PLS
4 PLS
ENVIRONMENTAL SPECIFICATIONS
NOTES
MIL-E-5400, MIL-STD-202,
Operating Temp
Storage Temp
Humidity
Shock
Altitude
Vibration
Thermal Shock
Temperature Cycle
1.
2.
3.
4.
MIL-E-16400
-30°C to +70°C
-55°C to +125°C
MIL-STD-202F, M103, Cond B
MIL-STD-202F, M213, Cond B
MIL-STD-202F, M105, Cond B
MIL-STD-202F, M204, Cond B
MIL-STD-202F, M107, Cond A
MIL-STD-202F, M105C, Cond D
SCREENING
Internal Visual per MIL-STD-883, Method 2017
Temperature Cycle: -65°C to +100°C, 10 cycles
Hermetically-sealed phase shifters are fine and gross leak checked per
MIL-STD-883, Method 1014
Optional High-Rel screening available upon request. Contact the factory
to discuss your screening requirements
56 | w w w . a e r o f l e x . c o m / a c c | 1 - 7 3 2 - 4 6 0 - 0 2 12
5.
The voltages required are ±15V @ 50mA.
Switching speed on all models is 200nS.
Monotonicity is Guaranteed.
The Phase shift varies with frequency at any voltage setting.
This variation, referenced to 0° at logic 0 for each frequency, is
approximately ±15% for octave models, 10% for models with
25% bandwidth, and ±7.5% for models with 10% bandwidth.
Phase flatness of the QQ-65 & QQ-74 is ±25%.
Least Significant BIT = Total Phase Shift divided by the number
of steps. 8 BITS = 256 steps.
Phase Shifters
Digitally Controlled Analog Phase Shifters
OUTLINE CASE STYLE QQ
ADDITIONAL ELECTRICAL SPECIFICATIONS
DC Supply:
`B'
`D'
`F'
.38
2 PLS
+5V ±0.5V @ +275mA
-5V ±0.5V @ -50mA
8 Bits command
Control:
1 Strobe line
Positive edge latched
Logic Levels:
TTL/HMOS
Attenuation Accuracy:
+/-0.15 dB or +/-1.5% whichever is greater
Attenuation Stability over +/-0.025 dB/°C
Temperature:
MECHANICAL SPECIFICATIONS
`E'
.125 DIA
THRU `G'
MTG HOLES `C'
.25
POWER/LOGIC
`A'
Case Style
Connectors
Control Connector
Bias & Control Pins
Mounting
PIN 8
PIN 1
.10
QQ Outline
SMA Female per MIL-C-39012
Micro-D 21 Pin
ø0.02” x 0.15” long
ø0.10” through holes (4) places
CUSTOM OPTIONS – CONTACT FACTORY
Gray epoxy paint per MIL-C-22750
Video transient suppression
GPO connectors
ECL logic input
Phase and amplitude tracking
Other frequency ranges available from 1MHz to 26GHz
Reversed logic
Available without SMA connectors for drop-in applications
High-Rel screening
1.00
RF
PIN 9
PIN 15
.19
w w w. a e r o f l e x . c o m / a c c
|
1 - 7 3 2 - 4 6 0 - 0 2 12
| 57
Couplers
Hybrid Couplers
Aeroflex Control Components' Hybrid couplers, series QH and MH are available
ble in 6dB,
R and
d
10dB, 20dB, and 30dB coupling values. These units feature high directivity and low VSWR
are conservatively rated to ensure the most reliable service and performance. The direction
al couplers on this page are unequalled in terms of size and performance. The volume of
these couplers make them ideally suited for applications involving high density packaging.
QH SERIES 3dB 90° HYBRID
Frequency
Range
(GHz)
Part
Number
Nomonal
Coupling
(dB)
.025 - .05
0.05 - 0.1
2.0 - 8.0
.05 -.10
0.1 - 0.2
0.2 - 0.4
0.25 - 0.5
0.5 - 1.0
1.0 - 2.0
1.0 - 2.0
1.5 - 3.0
1.5 - 3.0
2.0 - 4.0
2.6 - 5.2
4.0 - 8.0
7.0 - 11.0
7.0 - 12.4
12.0 - 18.0
8.0 - 16.0
12.0 -18.0
8.0 - 18.0
QH-17
QH-18
QH-19
QH-20
QH-21
QH-23
QH-26
QH-28
QH-31
QH-32
QH-33
QH-34
QH-36
QH-43
QH-45
QH-48
QH-51
QH-55
QH-57
QH-58
QH-88
3.0 +.15/-0
3.0 +.15/-0
3.0 +.15/-0
3.0 +.15/-0
3.0 +.15/-0
3.0 +.15/-0
3.0 +.15/-0
3.0 +.15/-0
3.0 +.15/-0
3.0 +.15/-0
3.0 +.20/-0
3.0 +.15/-0
3.0 +.20/-0
3.0 +.20/-0
3.0 +.25/-0
3.0 +.25/-0
3.0 +.35/-0
3.0 +.35/-0
3.0 +.50/-0
3.0 +.50/-0
3.0 +.50/-0
Max
Max
Deviation
Insertion
From Nominal Loss (dB)
Coupling (dB)
±.40
±.40
±.40
±.40
±.40
±.40
±.40
±.40
±.40
±.40
±.40
±.45
±.45
±.45
±.50
±.50
±.50
±.50
±.60
±.60
±.60
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.20
0.20
0.20
0.20
0.25
0.25
0.35
0.35
0.50
0.50
0.50
Min
Iso.
(dB)
VSWR
Max
Phase
Balance
Degrees
"A"
in
"B"
in
"C"
in
"D"
in
"E"
in
"F"
in
"G"
in
22
22
22
22
22
22
22
22
22
22
22
22
22
20
20
20
17
17
16
16
16
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.20
1.20
1.20
1.20
1.20
1.20
1.25
1.30
1.30
1.35
1.35
1.45
1.50
1.50
±1.0
±1.0
±1.0
±1.0
±1.0
±1.0
±1.0
±1.0
±2.0
±2.0
±2.5
±2.5
±2.5
±3.0
±3.0
±3.0
±4.0
±4.0
±5.0
±5.0
±5.0
3.00
3.00
3.00
2.90
2.15
1.90
1.65
2.80
1.65
1.25
1.25
1.00
1.00
1.00
0.90
0.90
0.95
0.95
0.95
0.95
0.95
2.00
2.00
2.00
1.90
1.60
1.25
1.15
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.55
0.55
0.55
0.55
1.08
0.95
0.82
0.55
0.82
0.82
0.63
0.50
0.50
0.50
0.45
0.45
0.48
0.48
0.48
0.48
0.48
1.90
1.90
1.90
1.90
1.70
-
1.80
1.80
1.80
1.70
1.40
1.05
0.95
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
-
MH SERIES 3dB 180° HYBRID
Frequency
Range
(GHz)
Part
Number
0.2 - 0.4
0.25 - 0.5
0.5 -1.0
1.0 - 2.0
1.5 - 3.0
2.0 - 4.0
2.6 - 5.2
4.0 - 8.0
MH-22
MH-24
MH-29
MH-33
MH-36
MH-39
MH-42
MH-46
MH-51
MH-52
MH-54
MH-58
7.0 - 11.0
7.0 - 12.4
8.0 - 16.0
Nomonal
Coupling
(dB)
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
Max
Max
Deviation
Insertion
From Nominal Loss (dB)
Coupling (dB)
+.25/-0
+.25/-0
+.25/-0
+.30/-0
+.30/-0
+.30/-0
+.35/-0
+.35/-0
+.45/-0
+.45/-0
+.45/-0
+.45/-0
±.50
±.50
±.50
±.50
±.50
±.55
±55
±.60
±.60
±.60
±.60
±.60
0.25
0.25
0.25
0.30
0.30
0.30
0.30
0.35
0.45
0.45
0.45
0.45
Min
Iso.
(dB)
VSWR
Max
Phase
Balance
Degrees
"A"
in
"B"
in
"C"
in
"D"
in
"E"
in
"F"
in
"G"
in
20
20
20
18
18
18
18
17
17
17
15
15
1.30
1.30
1.30
1.30
1.30
1.35
1.40
1.45
1.50
1.50
1.50
1.50
±4.0
±4.0
±4.0
±4.0
±4.0
±4.0
±4.0
±4.0
±5.0
±5.0
±5.0
±5.0
4.00
4.00
3.25
2.00
2.00
1.55
1.25
1.00
1.00
1.00
1.00
1.00
3.00
3.00
1.70
1.70
2.50
1.70
1.70
1.10
1.10
1.10
1.10
1.10
0.20
0.20
0.20
0.20
2.25
0.20
0.20
0.55
0.55
0.55
0.55
0.55
0.26
0.26
1.30
1.30
0.50
1.30
1.30
-
3.80
3.80
3.05
1.80
0.50
1.35
1.05
0.80
0.80
0.80
0.80
0.80
0.25
0.25
0.40
0.38
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.28
0.25
0.38
0.25
0.25
0.25
0.25
0.25
0.25
MECHANICAL SPECIFICATIONS
SCREENING
Case Style
Connectors
Control Connector
Bias & Control Pins
Mounting
Internal Visual per MIL-STD-883, Method 2017
Temperature Cycle
-65°C to +100°C, 10 cycles
Hermetically-sealed hybrid couplers are fine and gross leak checked
per MIL-STD-883, Method 1014
Optional High-Rel screening available upon request
Contact the factory to discuss your screening requirements
QH or MH Outline
SMA Female per MIL-C-39012
Micro-D 21 Pin
ø0.02” x 0.15” long
ø0.10” through holes (4) places
58 | w w w . a e r o f l e x . c o m / a c c | 1 - 7 3 2 - 4 6 0 - 0 2 12
Couplers
Hybrid Couplers
OUTLINE CASE STYLE QH
OUTLINE CASE STYLE MH
“A”
“F”
.10
“A”
SMA FEMALE
CONNECTOR
RECEPTACLE
PER MIL-PRF-39012
4 PLS
OUT 1
.38
“E”
“F”
“C”
.38
TYP
OUT 2
J2
J1
J3
J4
“B”
“B”
.50
“D”
“E”
“G”
IN
ISOL
.38
2X Ø.140±.002
.093 DIA THRU
MTG HOLE 4 PLS
J2
J3
.38
J1
“D”
J4
“C”
ENVIRONMENTAL SPECIFICATIONS
CUSTOM OPTIONS – CONTACT FACTORY
MIL-E-5400, MIL-STD-202,
Operating Temp
Storage Temp
Humidity
Shock
Altitude
Vibration
Thermal Shock
Temperature Cycle
Gray epoxy paint per MIL-C-22750
Video transient suppression
GPO connectors
ECL logic input
Phase and amplitude tracking
Other frequency ranges available from 1MHz to 26GHz
Reversed logic
Available without SMA connectors for drop-in applications
High rel screening
MIL-E-16400
-30°C to +70°C
-55°C to +125°C
MIL-STD-202F, M103, Cond B
MIL-STD-202F, M213, Cond B
MIL-STD-202F, M105, Cond B
MIL-STD-202F, M204, Cond B
MIL-STD-202F, M107, Cond A
MIL-STD-202F, M105C, Cond D
w w w. a e r o f l e x . c o m / a c c
|
1 - 7 3 2 - 4 6 0 - 0 2 12
| 59
Couplers
Directional Couplers
Aeroflex Control Components' miniature stripline couplers, series CA are available in
6dB, 10dB, 20dB, and 30dB coupling values. These units feature high directivity and low
w
VSWR and are concervatively rated to ensure the most reliable service and performance.
The direction al couplers on this page are unequalled in terms of size and performance.
The volume of these couplers make them ideally suited for applications involving high
density packaging.
CA SERIES
Frequency
Range
(GHz)
Part
Number
Frequency
Flatness
(dB)
Min
Directivity
(dB)
Max
Input /Output
VSWR
Max Loss
Above Coupling
Loss (dB)
Max
Peak
Power
(kW)
Max
Avg. Power
Watts
Outline
0.5 - 1.0
0.5 - 2.0
0.75 - 1.5
0.8 - 2.5
1.0 - 2.0
1.5 - 3.0
2.0 - 4.0
2.0 - 8.0
2.6 - 5.2
4.0 - 8.0
6.0 - 18.0
7.0 - 12.4
8.0 - 16.0
8.0 - 18.0
12.4 - 18.0
CA-51X
CA-52X
CA-55X
CA-57X
CA-59X
CA-63X
CA-67X
CA-69X
CA-71X
CA-75X
CA-77X
CA-79X
CA-83X
CA-87X
CA91X
±0.75
±0.75
±0.75
±0.75
±0.75
±0.75
±0.75
±0.75
±0.75
±0.75
±0.75
±0.50
±0.70
±0.70
±0.50
20
20
20
20
20
20
20
17
20
18
14
17
15
14
15
1.2
1.2
1.2
1.2
1.2
1.2
1.25
1.3
1.25
1.25
1.45
1.3
1.4
1.45
1.4
0.15
0.20
0.20
0.20
0.20
0.20
0.20
0.30
0.25
0.30
0.55
0.45
0.50
0.55
0.55
3
3
3
3
3
3
3
2
3
3
2
2
2
2
2
50
50
50
50
50
50
40
20
40
40
20
30
30
20
30
1
2
3
3
4
5
6
7
8
8
8
8
8
8
8
CA SERIES OUTLINES (inches)
OUTLINE
1
2
3
4
5
6
7
8
* Note 2
A
3.1
3.4
2.5
1.8
1.4
1.0
1.3
0.9
B*
0.5
0.5
0.5
0.55
0.5
0.5
0.5
0.5
SCREENING
C
0.8
0.95
0.6
0.43
0.5
-
D
1.5
1.5
1.3
0.94
0.4
-
E
0.5
0.65
0.45
NOTES
1.
2.
3.
4.
Rugged 4 hole connector construction insures superiority.
For all 30dB couplers "B" dimension is .55 inches.
50 Ohm termination is supplied on each unit delivered. Power rating
is 1 Watt at 25°C.
Coupling includes frequency flatness & coupling measurement in
reference to the input port. Coupling is standard on these units.
60 | w w w . a e r o f l e x . c o m / a c c | 1 - 7 3 2 - 4 6 0 - 0 2 12
Internal Visual per MIL-STD-883, Method 2017
Temperature Cycle -65°C to +100°C, 10 cycles
Hermetically-sealed switches are fine and gross leak checked per
MIL-STD-883, Method 1014
Optional High-Rel screening available upon request
Contact the factory to discuss your screening requirements
Couplers
Directional Couplers
OUTLINE CASE STYLE CA
ENVIRONMENTAL SPECIFICATIONS
.19
.38
.20
.20
TERMINATION
CPL
“B”
.075
OUT
IN
MIL-E-16400
-30°C to +70°C
-55°C to +125°C
MIL-STD-202F, M103, Cond B
MIL-STD-202F, M213, Cond B
MIL-STD-202F, M105, Cond B
MIL-STD-202F, M204, Cond B
MIL-STD-202F, M107, Cond A
MIL-STD-202F, M105C, Cond D
MECHANICAL SPECIFICATIONS
.56 MAX
.38
3 PLS
MIL-E-5400, MIL-STD-202,
Operating Temp
Storage Temp
Humidity
Shock
Altitude
Vibration
Thermal Shock
Temperature Cycle
.215
Case Style
Connectors
Control Connector
Bias & Control Pins
Weight
Mounting
CA Outline
SMA Female per MIL-C-39012
Micro-D 21 Pin
ø0.02” x 0.15” long
19g max
ø0.10” through holes (4) places
“E”
“A”
.093 DIA THRU
MOUNTING HOLE
PART NUMBER ORDERING INFORMATION
Example:
CA-51X:
6:
1:
2:
3:
CA-516
X in the part number represents coupling value
6dB+/-1.0dB
10dB+/-1.2dB
20dB+/-1.2dB
30dB+/-1.2dB
w w w. a e r o f l e x . c o m / a c c
|
1 - 7 3 2 - 4 6 0 - 0 2 12
| 61
Couplers
Dual Directional Couplers
Aeroflex Control Components' forward and reverse dual directional stripline couplers,
plers, are
available in 6dB, 10dB, 20dB, and 30dB coupling values. These units feature high
directivity and low VSWR and are concervatively rated to ensure the most reliable service
and performance. The directional couplers on this page are unequalled in terms of size
and performance. The volume of these couplers make them ideally suited for applications
involving high density packaging.
CA SERIES
Frequency
Range
(GHz)
Part
Number
Minimum
Directivity
(dB)
Max
Prim /Sec
VSWR
Maximum
Insertion Loss
Above Coupling
Loss (dB)
"L"
inches (mm)
0.5 - 1.0
1.0 - 2.0
1.5 - 3.0
2.0 - 4.0
4.0 - 8.0
7.0 - 12.0
12.4 - 18.0
CLD-510-X
CLD-1020-X
CLD-1530-X
CLD-2040-X
CLD-4080-X
CLD-7012-X
CLD-1218-X
25
23
20
20
20
17
14
1.15
1.15
1.20
1.20
1.25
1.30
1.50
0.40
0.40
0.40
0.40
0.50
0.80
0.90
7.0 (177.8)
7.6 (193.0)
2.8 (71.1)
2.4 (61.0)
2.0 (50.8)
2.0 (50.8)
2.0 (50.8)
"H"
inches (mm)
0.5
0.5
0.5
0.5
0.5
0.5
0.5
(12.7)
(12.7)
(12.7)
(12.7)
(12.7)
(12.7)
(12.7)
NOTES
SCREENING
1.
2.
3.
Internal Visual per MIL-STD-883, Method 2017
Temperature Cycle -65°C to +100°C, 10 cycles
Hermetically-sealed switches are fine and gross leak checked per
MIL-STD-883, Method 1014
Optional High-Rel screening available upon request
Contact the factory to discuss your screening requirements
4.
Rugged 4 hole connector construction insures superiority.
For all 30dB couplers "B" dimension is .55 inches.
50 Ohm termination is supplied on each unit delivered. Power rating
is 1 Watt at 25°C.
Coupling includes frequency flatness & coupling measurement in
reference to the input port. Coupling is standard on these units.
ENVIRONMENTAL SPECIFICATIONS
PART NUMBER ORDERING INFORMATION
MIL-E-5400, MIL-STD-202,
Operating Temp
Storage Temp
Humidity
Shock
Altitude
Vibration
Thermal Shock
Temperature Cycle
Example:
CLD-1020-X:
6:
10:
20:
30:
MIL-E-16400
-30°C to +70°C
-55°C to +125°C
MIL-STD-202F, M103, Cond B
MIL-STD-202F, M213, Cond B
MIL-STD-202F, M105, Cond B
MIL-STD-202F, M204, Cond B
MIL-STD-202F, M107, Cond A
MIL-STD-202F, M105C, Cond D
MECHANICAL SPECIFICATIONS
Case Style
Connectors
Control Connector
Bias & Control Pins
Mounting
CLD Outline
SMA Female per MIL-C-39012
Micro-D 21 Pin
ø0.02” x 0.15” long
ø0.10” through holes (4) places
62 | w w w . a e r o f l e x . c o m / a c c | 1 - 7 3 2 - 4 6 0 - 0 2 12
CLD-1020-X
X in the part number represents coupling value
6dB+/-1.0dB
10dB+/-1.2dB
20dB+/-1.2dB
30dB+/-1.2dB
Couplers
Directional Couplers
OUTLINE CASE STYLE CLD
TYPE “SMA” FEMALE
(4) PLS.
.62”
J3
J4
J1
.38”
TYP.
J2
“L”
“H”
.38”
w w w. a e r o f l e x . c o m / a c c
|
1 - 7 3 2 - 4 6 0 - 0 2 12
| 63
Power Dividers
2 Way In-Phase Power Divider / Combiners
Available as 2 way standard products, these feature Wilkinson structures to optimize
performance over selected bandwidths. Custom designs are also available in other
configurations such as asymmetric and multi input/output applications.
YL & YLS SERIES
Frequency
Range
(GHz)
Part
Number
0.5 - 1.0
0.5 - 2.0
0.75 - 1.5
0.95 - 1.3
1.0 - 2.0
1.0 - 4.0
1.5 - 3.0
1.7 - 2.4
2.0 - 4.0
3.2 - 3.7
3.6 - 4.3
4.0 - 8.0
5.7 - 6.5
6.0 - 18.0
7.0 -14.0
7.1 - 7.7
1.0 - 12.4
8.0 - 12.4
14.0 - 16.0
12.0 -18.0
2.0 - 18.0
9.0 - 18.0
0.225 - 2.5
YL-18
YL-70
YL-19
YL-80
YL-23
YL-71
YL-25
YL-82
YL-33
YL-42
YL-84
YL-48
YL-86
YL-74
YL-56
YL-88
YL-76
YL-90
YL-94
YL-92
YL-78
YL-58
D3225
1.20 / 1.15
1.25 / 1.20
1.20 / 1.15
1.20 / 1.15
1.25 / 1.20
1.30 / 1.20
1.25 / 1.20
1.25 / 1.20
1.25 / 1.20
1.25 / 1.20
1.25 / 1.20
1.30 / 1.25
1.25 / 1.20
1.50 / 1.40
1.40 / 1.35
1.30 / 1.25
1.50 / 1.40
1.40 / 1.35
1.40 / 1.35
1.50 / 1.40
1.50 / 1.40
1.45 / 1.40
1.5
0.2
0.5
0.2
0.2
0.3
0.5
0.3
0.2
0.3
0.3
0.3
0.4
0.3
1
0.5
0.4
1
0.6
1.4
0.7
1.1
0.7
1
0.75 - 1.5
1.5 - 3.0
2.0 - 4.0
4.0 - 8.0
7.0 - 14.0
0.5 - 2.0
3.6 - 4.3
3.6 - 4.3
8.0 - 12.4
12.0 - 18.0
YLS-19
YLS-25
YLS-33
YLS-48
YLS-56
YLS-70
YLS-80
YLS-84
YLS-90
YLS-92
D301M
1.20 / 1.15
1.25 / 1.20
1.25 / 1.20
1.30 / 1.25
1.40 / 1.35
1.25 / 1.15
1.20 / 1.15
1.25 / 1.20
1.35 / 1.30
1.50 / 1.40
1.70 / 1.30
1.60 / 1.30
1.50 /1.30
1.50 / 1.40
1.50 / 1.40
1.60 / 1.50
1.70 / 1.60
1.0 - 1.5
1.5 - 2.0
2.0 - 4.0
4.0 - 8.0
8.0 - 12.0
12.0 - 16.0
16.0 - 18.0
Max
In/Out
VSWR
Max
Insertion
Loss (dB)
Phase
Balance
Degrees
Amp
Balance
(dB)
"A"
in
"B"
in
"C"
in
"D"
in
"E"
in
22
20
21
23
20
20
20
23
21
21
23
18
22
16
19
22
16
18
16
18
18
19
13
2
2
2
2
2
2
3
2
3
3
2
4
2
6
6
3
6
3
8
6
8
8
3
0.15
0.2
0.15
0.1
0.2
0.2
0.2
0.1
0.2
0.2
0.15
0.3
0.15
0.4
0.4
0.15
0.4
0.2
0.2
0.3
0.4
0.4
0.25
1.5
1.3
1.3
1.15
1
1
0.8
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.26
1.75
1.75
1.75
1.25
1.75
1.75
1.25
0.82
1
1
1
0.75
1
0.82
0.75
0.75
2.75
0.82
0.82
0.82
1.5
0.82
1
1.3
1.1
1.1
0.95
0.8
0.8
0.6
0.65
0.65
0.65
0.65
0.65
0.65
0.65
0.65
0.65
0.65
0.65
0.65
0.65
0.65
0.65
-
0.88
0.88
0.88
0.63
0.88
0.88
0.63
0.38
0.5
0.5
0.5
0.3
0.5
0.38
0.3
0.3
1.38
0.38
0.38
0.38
0.75
0.38
-
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
-
0.2
0.3
0.3
0.4
0.5
0.4
0.2
0.3
0.5
0.7
21
21
21
20
19
22
23
23
20
18
2
3
3
4
6
2
2
2
3
6
0.15
0.2
0.2
0.3
0.4
0.2
0.1
0.15
0.2
0.3
1.3
0.8
0.85
0.85
0.85
1.3
1.15
0.85
0.85
0.85
1.75
1.25
1
0.75
0.82
1.75
1.25
1
0.82
0.82
1.1
0.6
0.65
0.65
0.65
1.1
0.95
0.65
0.65
0.65
0.88
0.63
0.5
0.3
0.38
0.88
0.63
0.5
0.38
0.38
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.5
0.5
0.4
0.5
0.8
0.9
1.2
12
15
20
18
16
15
12
1
1
1
2
3
4
7
0.2
0.2
0.2
0.2
0.2
0.3
0.4
0.5
1.625
-
1.5
0.375
64 | w w w . a e r o f l e x . c o m / a c c | 1 - 7 3 2 - 4 6 0 - 0 2 12
Min
Iso.
(dB)
Power Dividers
2 Way In-Phase Power Divider / Combiners
OUTLINE CASE STYLE YL
OUTLINE CASE STYLE YLS & D301M
“A”
.38
“A” / 2
.10
“C”
`A'
`C'
.19
.38
LABEL
A/2
SMA FEMALE
CONNECTOR
3 PLS
.10
.38
3 PLS
IN
IN
“D”
B/2
.093 DIA THRU
2 MTG HOLES
“B”
`B'
Ø.093 THRU
2 PLS
OUT
OUT
OUT
OUT
`E'
.38
TYP
“E”
“C”
SMA FEMALE
CONN, 3 PLS
MECHANICAL SPECIFICATIONS
ENVIRONMENTAL SPECIFICATIONS
Case Style
Connectors
MIL-E-5400, MIL-STD-202,
Operating Temp
Storage Temp
Humidity
Shock
Altitude
Vibration
Thermal Shock
Temperature Cycle
YL Outline
SMA Female per MIL-C-39012
NOTES
Please Contact the Factory for Custom Specifications
MIL-E-16400
-55°C to +85°C
-55°C to +125°C
MIL-STD-202F, M103, Cond B
MIL-STD-202F, M213, Cond B
MIL-STD-202F, M105, Cond B
MIL-STD-202F, M204, Cond B
MIL-STD-202F, M107, Cond A
MIL-STD-202F, M105C, Cond D
w w w. a e r o f l e x . c o m / a c c
|
1 - 7 3 2 - 4 6 0 - 0 2 12
| 65
Power Dividers
3 Way In-Phase Power Divider / Combiners
Available as 3 way standard products, these feature Wilkinson structures to optimize
performance over selected bandwidths. Custom designs are also available in other
configurations such as asymmetric and multi input/output applications.
YT SERIES
Frequency
Range
(GHz)
Part
Number
0.95 - 1.25
1.2 - 1.4
1.7 - 2.4
5.2 - 6.0
3.7 - 4.2
5.4 - 5.9
5.2 - 6.0
6.8 - 8.5
7.5 - 8.5
8.4 - 9.7
9.5 - 11.0
11.0 - 14.0
13.1 - 13.5
15.0 - 18.0
YT-18
YT-22
YT-23
YT-26
YT-41
YT-55
YT-56
YT-68
YT-71
YT-89
YT-92
YT-95
YT-94
YT-98
Max
In/Out
VSWR
1.25 / 1.20
1.20 / 1.15
1.30 / 1.25
1.25 / 1.20
1.30 / 1.25
1.35 / 1.30
1.35 / 1.30
1.40 / 1.35
1.35 / 1.30
1.40 / 1.35
1.45 / 1.40
1.50 / 1.45
1.35 / 1.30
1.50 / 1.45
Max
Insertion
Loss (dB)
0.5
0.5
0.5
0.5
0.5
0.6
0.6
0.8
0.6
0.5
0.5
0.75
0.65
1.1
Min
Iso.
(dB)
20
22
20
22
20
20
18
18
20
17
17
16
20
16
Phase
Balance
Degrees
Amp
Balance
(dB)
"A"f"
in
"B"
in
"C"
in
"D"
in
"E"
in
2
2
2
2
2
3
3
4
3
4
4
5
3
5
0.2
0.2
0.2
0.2
0.2
0.25
0.25
0.25
0.25
0.3
0.3
0.3
0.25
0.45
2
2
2
2
2
1.75
1.75
1.75
1.75
1.75
1.75
1.75
1.75
1.75
5
5
3
3
3
2
2
2
2
1.5
1.5
1.5
1.5
1.5
1.8
1.8
1.8
1.8
1.8
1.55
1.55
1.55
1.55
1.55
1.55
1.55
1.55
1.55
4.6
4.6
2.6
2.6
2.6
1.6
1.6
1.6
1.6
1.1
1.1
1.1
1.1
1.1
0.4
0.4
0.4
0.4
0.4
0.25
0.25
0.25
0.25
0.38
0.38
0.38
0.38
0.38
MECHANICAL SPECIFICATIONS
ENVIRONMENTAL SPECIFICATIONS
Case Style
Connectors
MIL-E-5400, MIL-STD-202,
Operating Temp
Storage Temp
Humidity
Shock
Altitude
Vibration
Thermal Shock
Temperature Cycle
YT Outline
SMA Female per MIL-C-39012
NOTES
Please Contact the Factory for Custom Specifications
66 | w w w . a e r o f l e x . c o m / a c c | 1 - 7 3 2 - 4 6 0 - 0 2 12
MIL-E-16400
-55°C to +85°C
-55°C to +125°C
MIL-STD-202F, M103, Cond B
MIL-STD-202F, M213, Cond B
MIL-STD-202F, M105, Cond B
MIL-STD-202F, M204, Cond B
MIL-STD-202F, M107, Cond A
MIL-STD-202F, M105C, Cond D
Power Dividers
3 Way In-Phase Power Divider / Combiners
OUTLINE CASE STYLE YT
“B”
.38
OUT
“D”
OUT
.60
OUT
D/C
“C”
64537
“A”
IN
.60
“E”
.10
.093 DIA THRU
4 MOUNT HOLES
.38
.20
w w w. a e r o f l e x . c o m / a c c
|
1 - 7 3 2 - 4 6 0 - 0 2 12
| 67
Power Dividers
4 & 8 Way In-Phase Power Divider / Combiners
Available as 4 or 8 way standard products, these feature Wilkinson structures to optimize
performance over selected bandwidths. Custom designs are also available in other
configurations such as asymmetric and multi input/output applications.
YF SERIES 4 WAY
Frequency
Range
(GHz)
Part
Number
Max
In/Out
VSWR
Max
Insertion
Loss (dB)
Min
Iso.
(dB)
Phase
Balance
Degrees
Amp
Balance
(dB)
"A"
in
"B"
in
"C"
in
"D"
in
"E"
in
0.5 - 1.0
0.5 - 2.0
0.75 - 1.5
0.95 - 1.3
1.0 - 2.0
1.0 - 4.0
1.5 - 3.0
1.7 - 2.4
2.0 - 4.0
2.0 - 8.0
3.7 - 4.3
5.7 - 6.5
4.0 - 8.0
7.0 - 14.0
8.0 - 12.4
2.0 - 18.0
6.0 - 18.0
9.0 - 18.0
12.0 -18.0
14.0 - 16.0
YF-23
YF-51
YF-25
YF-33
YF-28
YF-54
YF-30
YF-35
YF-38
YF-55
YF-37
YF-42
YF-45
YF-46
YF-53
YF-57
YF-56
YF-49
YF-59
YF-60
D418M
1.25 / 1.20
1.40 / 1.30
1.25 / 1.20
1.25 / 1.20
1.30 / 1.20
1.45 / 1.35
1.30 / 1.20
1.30 / 1.25
1.30 / 1.20
1.50 / 1.40
1.30 / 1.25
1.30 / 1.25
1.40 / 1.30
1.50 / 1.40
1.50 / 1.40
1.70 / 1.50
1.70 / 1.50
1.70 / 1.50
1.50 / 1.40
1.45 / 1.40
0.5
1
0.5
0.4
0.5
1
0.6
0.5
0.8
1.2
0.5
0.6
1
1
1
2
1.5
1.3
1.3
1.2
20
18
20
21
20
18
20
21
18
16
21
20
18
18
18
14
14
15
17
17
3
4
3
3
3
4
3
3
3
5
3
3
5
7
5
10
10
8
6
6
0.3
0.4
0.3
0.1
0.3
0.4
0.3
0.2
0.3
0.5
0.2
0.2
0.5
0.6
0.5
0.7
0.7
0.7
0.6
0.4
2
2.6
2.6
2
2
1.6
3.2
2
1.6
2
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
2.25
2.75
2.75
2
1.75
2
2.5
2
1.5
2.25
1.5
1
1.5
1.75
1.75
2.9
1.75
1.75
1.75
1.75
1.8
2.4
2.4
1.8
1.8
1.4
3
1.8
1.4
1.8
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
0.25
0.25
0.25
0.25
0.25
0.2
0.2
0.25
0.2
0.25
0.2
0.5
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.5
0.7
0.7
0.5
0.5
0.4
0.4
0.5
0.4
0.5
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
1.80 / 1.35
1.80 / 1.35
1.80 / 1.45
1.80 / 1.45
1.70 / 1.45
1.70 / 1.45
1.80 / 1.45
0.7
0.8
1.0
1.2
1.4
1.8
2.0
10
14
17
17
17
15
12
1
2
4
6
10
13
15
0.2
0.2
0.3
0.4
0.5
0.6
0.6
2
3.2
1.6
0.2
0.4
1.0 - 1.5
1.5 - 2.0
2.0 - 4.0
4.0 - 8.0
8.0 - 12.0
12.0 - 16.0
16.0 - 18.0
YE SERIES 8 WAY
Frequency
Range
(GHz)
Part
Number
Max
In/Out
VSWR
Max
Insertion
Loss (dB)
Min
Iso.
(dB)
Phase
Balance
Degrees
Amp
Balance
(dB)
"A"
in
"B"
in
"C"
in
"D"
in
"E"
in
0.5 - 1.0
1.0 - 2.0
2.0 - 4.0
2.0 - 8.0
4.0 - 8.0
1.7 - 2.4
3.7 - 4.3
5.7 - 6.5
6.0 - 18.0
8.0 - 12.4
2.0 - 18.0
12.0 - 18.0
14.0 - 16.0
YE-09
YE-11
YE-21
YE-28
YE-41
YE-51
YE-61
YE-66
YE-68
YE-81
YE-88
YE-76
YE-86
1.35 / 1.30
1.40 / 1.35
1.45 / 1.40
1.70 / 1.65
1.60 / 1.55
1.35 / 1.30
1.35 / 1.30
1.35 / 1.30
2.00 / 1.90
1.70 / 1.65
2.00 / 1.90
1.80 / 1.75
1.60 / 1.50
0.7
0.8
1.1
1.5
1.4
0.7
0.7
0.9
2.3
1.2
3.2
1.8
1.6
20
18
17
16
16
19
19
19
13
15
13
13
14
3
4
4
8
7
4
5
5
15
6
15
15
10
0.35
0.35
0.35
0.7
0.6
0.3
0.3
0.3
1
0.4
1
0.6
0.5
4.5
4
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
2.75
2.25
2
4
2
2.5
2
2
2.85
2.5
3.75
2.5
1.5
4.3
3.8
3
3
3
3
3
3
3
3
3
3
3
0.5
0.25
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.5
0.5
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
68 | w w w . a e r o f l e x . c o m / a c c | 1 - 7 3 2 - 4 6 0 - 0 2 12
Power Dividers
4 & 8 Way In-Phase Power Divider / Combiners
OUTLINE CASE STYLE YF
OUTLINE CASE STYLE YE
“A”
.38
.19
“A” /2
.38
TYP
“A”
IN
“A” / 2
“C”
.10
“B” / 2
IN
.093 DIA
THRU HOLE
2 MTG
HOLES
“B”
64537
YE-51
“B”
8-WAY POWER DIVIDER
Ø.125
MTG HOLES
2 PLS
“B” / 2
OUT
OUT
OUT
D/C
OUT
OUT
.10
OUT
OUT
OUT
.10
“E”
TYP 7 PLS
“D”
“E”
TYP
OUT
OUT
OUT
OUT
.39
CONN
SMA FEM
9 PLS
“C”
MECHANICAL SPECIFICATIONS
ENVIRONMENTAL SPECIFICATIONS
Case Style
Connectors
MIL-E-5400, MIL-STD-202,
Operating Temp
Storage Temp
Humidity
Shock
Altitude
Vibration
Thermal Shock
Temperature Cycle
YE or YF Outline
SMA Female per MIL-C-39012
NOTES
Please Contact the Factory for Custom Specifications
MIL-E-16400
-55°C to +85°C
-55°C to +125°C
MIL-STD-202F, M103, Cond B
MIL-STD-202F, M213, Cond B
MIL-STD-202F, M105, Cond B
MIL-STD-202F, M204, Cond B
MIL-STD-202F, M107, Cond A
MIL-STD-202F, M105C, Cond D
w w w. a e r o f l e x . c o m / a c c
|
1 - 7 3 2 - 4 6 0 - 0 2 12
| 69
Power Dividers
Series D200M Divider / Combiner
The maximum power rating of the three internal resistors is 0.5 KW peak 0.25 W Avg. The
internal resistors are arranged in a delta formation. When used as a divider, two branches
of the delta each dissipate one quarter of the power at the input. Microminiature chip film
resistors are used to optimize phase and amplitude balance performance.
ENVIRONMENTAL SPECIFICATIONS
D200M (MECHANICHAL)
MIL-E-5400, MIL-STD-202, MIL-E-16400
Operating Temp
-55°C to +85°C
Storage Temp
-55°C to +125°C
Humidity
MIL-STD-202F, M103, Cond B
Shock
MIL-STD-202F, M213, Cond B
Altitude
MIL-STD-202F, M105, Cond B
Vibration
MIL-STD-202F, M204, Cond B
Thermal Shock
MIL-STD-202F, M107, Cond A
Temperature Cycle
MIL-STD-202F, M105C, Cond D
Frequency Range (GHz)
DC - 2
2-4
4 - 18
Maximum Input Power:
Impedence:
Phase Balance:
Amplitude Balance:
Maximum Load Isolation:
Operating Temp:
OUTLINE CASE STYLE D200
PWR
D IV
50
.75
TYP
.38
TYP
.75
HEX
.38
MATES WITH TYPE
SMA MALE CONN
PER MIL-PRF-39012
3 PLS
70 | w w w . a e r o f l e x . c o m / a c c | 1 - 7 3 2 - 4 6 0 - 0 2 12
VSWR
1.35
1.50
1.70
.25 W
50 Ohms
±5 Degrees
±0.25dB
6dB
-55°C to +125°C
Insertion Loss
6.5
7.0
7.5
Phase Trimmers
Continuously Variable Phase Trimmer
A Phase Trimmer continuously changes the phase of a microwave signal by varying an
adjustment screw.
PV-18 (MECHANICAL)
Frequency
Range
(GHz)
Phase
Shift
Phase
Adjustment
Insertion
Loss
VSWR
RF Power
Operating Temp
1 - 18
20° minimum/
25°Typ at 1GHz
360° minimum/
450° Typ at 18GHz
(At Maximum
Adjustment)
The Phase is
continuously
adjustable with a
12 -15 turn screw
1dB maximum
(1 - 8GHz)
1.5 maximum
(8 - 18GHz)
1.5:1 maximum
(1 - 8GHz)
1.9:1 maximum
(8 - 18GHz)
3W CW and
3KW Peak Max
operational
-55°C to +85°C
OUTLINE CASE STYLE PV
SMA FEMALE CONNECTOR
PER MIL-PRF-39012
2 PLS
1.73
1.60
.65
.49
.24
.12
.65
1.20
.60
.28
.38, TYP
1.400
.10
.10
1.000
2-56 UNC-2B X .15 DP
MOUNTING HOLES, 4 PLS
w w w. a e r o f l e x . c o m / a c c
|
1 - 7 3 2 - 4 6 0 - 0 2 12
| 71
Custom Integrated Microwave Assemblies
Integrated Microwave Products
Aeroflex Control Components' extensive experience in multifunction microwave assemblies including: High Power T/R Switches,
Switch Matrices, Frequency Converters, Multiport Antenna Steering Systems, and Switched Amplifiers. These are just some of the
products we produce. Please Contact the factory for further assistance.
4 X 4 Switch / Combiner Matrix
Technical Features
• PIN Diode/ MMIC switch matrix features operation in popular
radar bands.
• Multiple RF technologies including microstrip and lumped
components for switches and power combiners provide
dense modular packaging, with digital drive circuitry and
multiple layer rf/digital PCB’s
• RF cross-over connections eliminated with blind mate
connectors and 90° rotation.
• Modular Construction
Time Delay Unit
Technical Features
• Ultra-Precise Switched Time Delay Units
• S-Band, L-Band, X-Band & Ku-Band
• 6 and 8 BIT Configurations
• Precise Phase & Attenuation
• Temperature Phase Compensated
• Controlled Constant Temperature surface
• Combination of switched microstrip and coaxial lines
Sub Elements
• PIN Switches
• Amplifier Modules
• Directional couplers
• Attenuators
• Digital logic
Application
• Phased Array and Aperture lens Antenna Systems
• Simulator Systems
Integrated Phase Shifter/Attenuator
Technical Features
• Frequency in S-Band
• 360° Minimum Phase Shift
• 60dB Minimum Attenuation
• ± 15 Volts power supply
• Analog Phase control (5 to 15V)
• 11 BIT Digital Attenuation Control
• VSWR 1.5:1
• Typical insertion loss 10dB
• 0 to 70° C Operation
• Clam Shell design to allow independent control of Phase
Shifter and Attenuator
Application
72 | w w w . a e r o f l e x . c o m / a c c | 1 - 7 3 2 - 4 6 0 - 0 2 12
• Simulation Systems
Custom Integrated Microwave Assemblies
Antenna Switch
Technical Features
• Pin diode switch assembly
• Communication pins
• 1.9 - 2.5 and 6.4 - 7.0GHz
• Phase relationships provide horizontal and vertical polarization
for microwave radio markets
• Vertical / Horizontal antenna switching
• High Isolator / low loss
IFF Switch Assembly
Technical Features
T
• 4kWatts peak power
• 1030 to 1090 MHz
• Integral power monitor high directivity couplers
• Sum -Diff Switching
• Integral self test couplers
• Full range of IFF products for switching, detecting, filter
duplexer T/ switching
• Mode V and Mode S operation
Ka-Band Upconverter
Technical Features
• Small, low power design
• Integrated digital attenuator for Gain control
• TX enable command
• BIT monitoring for LO, RF and IF
• Low spurious
Application
• UAV
Technical Features
• Integrated PLL Synthesizer
Dual Downconverter
• Built in Noise Circuitry for system testing
• Matched Amplitude and phase
• All surface mount design
• Wideband operation
Application
• UAV
4-12GHz Four Channel Compressive Receiver with Integral 2x4 Matrix Switch
Technical Features
• Modular design
• Integral Tunnel Diode detector circuitry
• CAN Bus Comm. architecture
• Integrated Temp sensors and BIT
Application
• Radio Astronomy
w w w. a e r o f l e x . c o m / a c c
|
1 - 7 3 2 - 4 6 0 - 0 2 12
| 73
Custom Integrated Microwave Assemblies
Switch Matrix 50 MHz to 3 GHz
Technical Features
• 8x2 non blocking
• 5Watts input power handling
Application
• Shipboard
• Multiple Antenna combining
Switch Matrix Assembly
Technical Features
• EW band operation
• 3 Band combining for full EW antenna combining
• Cal port for in-system BIT testing
• +28v input with DC/DC converters for power efficiency
• High IP3 and 1dB compression
• Modular design
• RS-422 interface
Ka-Band Dual Down Converter
Technical Features
• Common Lo for phase matching
• Integrated TX enable
• BIT monitoring
• Temperature sensing
Application
• Radar systems
EW Tri-Band 3x3 Blocking Matrix Switch
Technical Features
• Cal Input Ports
• Small low power design
• Integrated BIT detection
• Low Loss Wilkinson design
Application
• Airborne EW systems
Technical Features
• Full EW band
EW Switch Matrix
• Dual 1x10 Matrix
• Low Loss
• 6U VME design
Application
74 | w w w . a e r o f l e x . c o m / a c c | 1 - 7 3 2 - 4 6 0 - 0 2 12
• UAV
Index
PART NO.
ACLM-4504F
ACLM-4530
ACLM-4531
ACLM-4532
ACLM-4533
ACLM-4535
ACLM-4537
ACLM-4538
ACLM-4539
ACLM-4540
ACLM-4571F
ACLM-4572F
ACLM-4581
ACLM-4586F
ACLM-4594F
ACLM-4597
ACLM-4601
ACLM-4603
ACLM-4606
ACLM-4616F
ACLM-4618F
ACLM-4619F
ACLM-4637
ACLM-4650F
ACLM-4675F
ACLM-4700
ACLM-4700F
ACLM-4727F
ACLM-4732F
ACLM-4759F
ACLM4748F
ACLM-4765
ACLM-4769F
ACLM-4776
ACLM-4786F
ACLM-4797F
ACLM-4800F
ACLM-4805F
ACLM-4809F
ACLM4812F
ACLM-4827
ACLM-4828
ACLM-4829
ACLM-4851
ACLM-4852
ACLM-4866
ACLM-4869
ACLM-4870
ACLM-4871
ACLM-4874
ACLM-4885F
ACLM-4891
ACLM-4896
ACLM-4897
ACLM-4903
PAGE NO.
6
4
4
4
4
4
4
4
4
4
6
6
4
6
6
4
4
8
4
6
6
6
4
6
6
4
6
6
6
6
10
4
6
4
6
6
6
10
6
10
8
8
8
8
8
10
8
8
8
8
6
8
8
8
8
PART NO.
ACLM-4904
ACLM-4905
ACLM-4918
ACLM-4924
ACLM-4930
ACLM-4932
ACLM-4943
ACLM-4947
PAGE NO.
8
8
8
8
8
8
8
8
ACSP-2154
ACSP-2501N
ACSP-2502N
ACSP-2503N
ACSP-2504N
ACSP-2505N
ACSP-2506N
ACSP-2507N
ACSP-2517N
ACSP-2518NZ
ACSP-2519NZ
ACSP-2521NZ
ACSP-2523N
ACSP-2531N
ACSP-2538N
ACSP-2539NZ
ACSP-2543N
ACSP-2544NZ
ACSP-2546N
ACSP-2551NZ
ACSP-2572N
ACSP-2579NZ
ACSP-2602N
ACSP-2609N
ACSP-2630N
ACSP-2643N
ACSP-2643NZ
ACSP-2644N
ACSP-2644NZ
ACSP-2655N
ACSP-2656N
ACSP-2658N
ACSP-2663NZ
ACSP-2667N
ACSP-2755N
ACSP-2759N
ACSP-2761N
ACSP-2762N
20
12
12
12
12
12
12
12
12
22
22
22
12
14
12
22
14
22
12
22
12
22
14
14
12
14
22
14
22
14
12
12
22
14
14
12
14
12
ACSM-2001N
ACSM-2002N
ACSM-2003N
ACSM-2004N
ACSM-2005N
ACSM-2006N
ACSM-2007N
18
18
18
18
18
18
18
PART NO.
PAGE NO.
ACSM-2014N
ACSM-2015N
ACSM-2030P
ACSM-2031P
ACSM-2032P
ACSM-2033P
ACSM-2034P
ACSM-2035N
ACSM-2036P
ACSM-2038N
ACSM-2047N
ACSM-2066N
ACSM-2075N
ACSM-2108N
ACSM-2139P
ACSM-2155P
18
18
16
16
16
16
16
18
16
18
18
18
18
18
16
16
ACSW-5729
ACSW-5730
ACSW-5731
ACSW-5732
ACSW-5733
ACSW-5734
48
48
48
48
48
48
ACTM-1001N
ACTM-1002N
ACTM-1003N
ACTM-1006N
ACTM-1007N
ACTM-1009N
ACTM-1012N
ACTM-1013N
ACTM-1017N
ACTM-1020N
ACTM-1037N
ACTM-1054N
ACTM-1058N
ACTM-1066N
ACTM-1069N
ACTM-1071N
ACTM-1073N
ACTM-1078N
ACTM-1080N
ACTM-1114N
ACTM-1129N
ACTM-1130N
ACTM-1133N
ACTM-1136N
ACTM-1137N
ACTM-1144N
ACTM-1146N
ACTM-1155N
ACTM-1505N
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
30
30
30
30
30
30
26
30
26
26
ACTP-1501N
24
PART NO.
PAGE NO.
ACTP-1502N
ACTP-1503N
ACTP-1504N
ACTP-1505N
ACTP-1506N
ACTP-1514N
ACTP-1523N
ACTP-1524N
ACTP-1525N
ACTP-1528N
ACTP-1555N
ACTP-1563N
ACTP-1572N
ACTP-1573N
ACTP-1583N
ACTP-1584N
ACTP-1625N
ACTP-1629N
ACTP-1648N
ACTP-1662N
ACTP-1663N
ACTP-1795N
ACTP-1796N
ACTP-1797N
ACTP-1798N
ACTP-1799N
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
28
28
28
28
28
ATC4A
ATC4B
ATC4C
ATC4D
ATC5A
ATC5B
ATC5C
ATC6A
ATC6B
50
50
50
50
50
50
50
50
50
ATL4A
ATL4B
ATL4C
ATL4D
ATL5A
ATL5B
ATL5C
50
50
50
50
50
50
50
ATL6A
ATL6B
ATS4A
ATS4B
ATS4C
ATS4D
ATS5A
ATS5B
ATS5C
ATS6A
50
50
50
50
50
50
50
50
50
50
w w w. a e r o f l e x . c o m / a c c
|
1 - 7 3 2 - 4 6 0 - 0 2 12
| 75
Index
PART NO.
PAGE NO.
PART NO.
PAGE NO.
PART NO.
PAGE NO.
PART NO.
PAGE NO.
S1H2(R)
S1H3(R)
S1H4(R)
S1H5(R)
S1H6(R)
S1K1(R)
S1K2(R)
S1L1(R)
S1L2(R)
S1L3(R)
S1L4(R)
S1L5(R)
S1L6(R)
S1L7(R)
S1S1(R)
S1S2(R)
S1S3(R)
S1S4(R)
S1S5(R)
S1S6(R)
S1S7(R)
S1U1(R)
S1U2(R)
S1U3(R)
S1U4(R)
S1U5(R)
S1U6(R)
S1V1(R)
S1V2(R)
S1V3(R)
S1V4(R)
S1V5(R)
S1V6(R)
S1X1(R)
S1X2(R)
S1X3(R)
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
S2L3(R)
S2L4(R)
S2L5(R)
S2L6(R)
S2L7(R)
S2S1(R)
S2S2(R)
S2S3(R)
S2S4(R)
S2S5(R)
S2S6(R)
S2S7(R)
S2U1(R)
S2U2(R)
S2U3(R)
S2U4(R)
S2U5(R)
S2U6(R)
S2V1(R)
S2V2(R)
S2V3(R)
S2V4(R)
S2V5(R)
S2V6(R)
S2X1(R)
S2X2(R)
S2X3(R)
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
S2C1(R)
S2C2(R)
S2C3(R)
S2C4(R)
S2C5(R)
S2C6(R)
S2C7(R)
S2C8(R)
S2H1(R)
S2H2(R)
S2H3(R)
S2H4(R)
S2H5(R)
S2H6(R)
S2K1(R)
S2K2(R)
S2L1(R)
S2L2(R)
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
S3C1(R)
S3C2(R)
S3C3(R)
S3C4(R)
S3C5(R)
S3C6(R)
S3C7(R)
S3C8(R)
S3H1(R)
S3H2(R)
S3H3(R)
S3H4(R)
S3H5(R)
S3H6(R)
S3K1(R)
S3K2(R)
S3L1(R)
S3L2(R)
S3L3(R)
S3L4(R)
S3L5(R)
S3L6(R)
S3L7(R)
S3S1(R)
S3S2(R)
S3S3(R)
S3S4(R)
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
ATS6B
50
PV-18
71
CA-51X
CA-52X
CA-55X
CA-57X
CA-59X
CA-63X
CA-67X
CA-69X
CA-71X
CA-75X
CA-77X
CA-79X
CA-83X
CA-87X
CA91X
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
PQ-17
PQ-27
PQ-28
PQ-34
PQ-44
PQ-45
PQ-59
PQ-60
PQ-66
PQ-72
PQ-73
54
54
54
54
54
54
54
54
54
54
54
CLD-2040-X
CLD-4080-X
CLD-7012-X
CLD-1218-X
62
62
62
62
D200M
D201M
D301M
D3225
D306M
D307M
D410M
D418M
D807M
D810M
70
70
64
64
66
66
68
68
68
68
GT-R502-32
GT-R502-64
GT-0206-32
GT-0206-64
GT-0218-32
GT-0218-64
GT-0618-32
GT-0618-64
52
52
52
52
52
52
52
52
QH-17
QH-18
QH-19
QH-20
QH-21
QH-23
QH-26
QH-28
QH-31
QH-32
QH-33
QH-34
QH-36
QH-43
QH-45
QH-48
QH-51
QH-55
QH-57
QH-58
QH-88
58
58
58
58
58
58
58
58
58
58
58
58
58
58
58
58
58
58
58
58
58
MH-22
MH-24
MH-29
MH-33
MH-36
MH-39
MH-42
MH-46
MH-51
MH-52
MH-54
MH-58
58
58
58
58
58
58
58
58
58
58
58
58
QQ-07
QQ-27
QQ-28
QQ-34
QQ-44
QQ-45
QQ-60
QQ-66
QQ-73
56
56
56
56
56
56
56
56
56
S1C1(R)
S1C2(R)
S1C3(R)
S1C4(R)
S1C5(R)
S1C6(R)
S1C7(R)
S1C8(R)
S1H1(R)
32
32
32
32
32
32
32
32
32
76 | w w w . a e r o f l e x . c o m / a c c | 1 - 7 3 2 - 4 6 0 - 0 2 12
Index
PART NO.
PAGE NO.
PART NO.
PAGE NO.
PART NO.
PAGE NO.
PART NO.
S3S5(R)
S3S6(R)
S3S7(R)
S3U1(R)
S3U2(R)
S3U3(R)
S3U4(R)
S3U5(R)
S3U6(R)
S3V1(R)
S3V2(R)
S3V3(R)
S3V4(R)
S3V5(R)
S3V6(R)
S3X1(R)
S3X2(R)
S3X3(R)
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
S4V1(R)
S4V2(R)
S4V3(R)
S4V4(R)
S4V5(R)
S4V6(R)
S4X1(R)
S4X2(R)
S4X3(R)
38
38
38
38
38
38
38
38
38
S4C1(R)
S4C2(R)
S4C3(R)
S4C4(R)
S4C5(R)
S4C6(R)
S4C7(R)
S4C8(R)
S4H1R
S4H2R
S4H3R
S4H4R
S4H5R
S4H6R
S4K1(R)
S4K2(R)
S4L1(R)
S4L2(R)
S4L3(R)
S4L4(R)
S4L5(R)
S4L6(R)
S4L7(R)
S4S1(R)
S4S2(R)
S4S3(R)
S4S4(R)
S4S5(R)
S4S6(R)
S4S7(R)
S4U1(R)
S4U2(R)
S4U3(R)
S4U4(R)
S4U5(R)
S4U6(R)
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
S5C1(R)
S5C2(R)
S5C3(R)
S5C4(R)
S5C5(R)
S5C6(R)
S5C7(R)
S5C8(R)
S5H1(R)
S5H2(R)
S5H3(R)
S5H4(R)
S5H5(R)
S5H6(R)
S5K1(R)
S5K2(R)
S5L1(R)
S5L2(R)
S5L3(R)
S5L4(R)
S5L5(R)
S5L6(R)
S5L7(R)
S5S1(R)
S5S2(R)
S5S3(R)
S5S4(R)
S5S5(R)
S5S6(R)
S5S7(R)
S5U1(R)
S5U2(R)
S5U3(R)
S5U4(R)
S5U5(R)
S5U6(R)
S5V1(R)
S5V2(R)
S5V3(R)
S5V4(R)
S5V5(R)
S5V6(R)
S5X1(R)
S5X2(R)
S5X3(R)
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
S6C1(R)
S6C2(R)
S6C3(R)
S6C4(R)
S6C5(R)
S6C6(R)
S6C7(R)
S6C8(R)
S6H1(R)
S6H2(R)
S6H3(R)
S6H4(R)
S6H5(R)
S6H6(R)
S6K1(R)
S6K2(R)
S6L1(R)
S6L2(R)
S6L3(R)
S6L4(R)
S6L5(R)
S6L6(R)
S6L7(R)
S6S1(R)
S6S2(R)
S6S3(R)
S6S4(R)
S6S5(R)
S6S6(R)
S6S7(R)
S6U1(R)
S6U2(R)
S6U3(R)
S6U4(R)
S6U5(R)
S6U6(R)
S6V1(R)
S6V2(R)
S6V3(R)
S6V4(R)
S6V5(R)
S6V6(R)
S6X1(R)
S6X2(R)
S6X3(R)
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
XFC1
XFC2
XFC3
XFC4
XFC5
XFC6
XFC7
XFC8
XFH1
XFH2
XFH3
XFH4
XFH5
XFH6
XFK1
XFK2
XFL1
XFL2
XFL3
XFL4
XFL5
XFL6
XFL7
XFS1
XFS2
XFS3
XFS4
XFS5
XFS6
XFS7
XFU1
XFU2
XFU3
XFU4
XFU5
XFU6
XFV1
XFV2
XFV3
XFV4
XFV5
XFV6
XFX1
XFX2
XFX3
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
SWM-1100
SWM-1100A
SWM-1200
SWM-1200A
SWM-1300
SWM-1300A
SWM-1400
SWM-1400A
46
46
46
46
46
46
46
46
YE-09
YE-11
YE-21
YE-28
YE-41
YE-51
YE-61
YE-66
YE-68
68
68
68
68
68
68
68
68
68
w w w. a e r o f l e x . c o m / a c c
|
PAGE NO.
1 - 7 3 2 - 4 6 0 - 0 2 12
| 77
Index
PART NO.
PAGE NO.
PART NO.
PAGE NO.
YE-76
YE-81
YE-86
YE-88
68
68
68
68
YLS-80
YLS-84
YLS-90
YLS-92
64
62
62
62
YF-23
YF-25
YF-28
YF-30
YF-33
YF-35
YF-37
YF-38
YF-42
YF-45
YF-46
YF-49
YF-51
YF-53
YF-54
YF-55
YF-57
YF-56
YF-59
YF-60
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
YT-18
YT-22
YT-23
YT-26
YT-41
YT-55
YT-56
YT-68
YT-71
YT-89
YT-92
YT-94
YT-95
YT-98
66
66
66
66
66
66
66
66
66
66
66
66
66
66
YL-18
YL-19
YL-23
YL-25
YL-33
YL-42
YL-48
YL-56
YL-58
YL-70
YL-71
YL-74
YL-76
YL-78
YL-80
YL-82
YL-84
YL-86
YL-88
YL-90
YL-92
YL-94
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
YLS-19
YLS-25
YLS-33
YLS-48
YLS-56
YLS-70
64
64
64
64
64
64
78 | w w w . a e r o f l e x . c o m / a c c | 1 - 7 3 2 - 4 6 0 - 0 2 12
PART NO.
PAGE NO.
PART NO.
PAGE NO.
Index
Terms and Conditions of Sale
1.) PRICE. Price is F.O.B. Shipping point.
2.) PAYMENT. Upon approval of credit, payment is due on or before 30 days after date shipped. Partial payment is required on the
basis of partial shipments of the total order.
3.) DELIVERY. Estimates as to time of delivery are based on conditions prevailing at the offer date and apply from the date of receipt
of a definitive contract or purchase order. All agreements as to delivery are subject to the contingencies of strikes, fires, accidents,
or causes of delay beyond the control of AEROFLEX. Where a delay in delivery or failure to deliver is caused by factors beyond the
control of AEROFLEX, such delay or failure to deliver shall not be deemed a breach or default of this Agreement and AEROFLEX
shall have no liability for any damages, injury, costs or expenses incurred by the Buyer as a result of such delay or failure to deliver.
4.) ACCEPTANCE. Buyer shall be deemed to have accepted items sold hereunder when such items are delivered to the carrier for
shipment to Buyer.
5.) RISK OF LOSS. The risk of loss for any items sold hereunder shall pass to Buyer at that time when such items are delivered to the
carrier for shipment.
6.) NON CONFORMING DELIVERY. All claims for shortages or other non-conformity of delivery or of the items shipped must be
made in writing within ten (10) days of Buyer's receipt of shipment. AEROFLEX shall have an unqualified right to cure any nonconformity. In no event shall AEROFLEX be liable for incidental or consequential damages arising from or relating to a nonconforming shipment. Buyer shall not return any items hereunder as non-conforming without the prior consent of AEROFLEX.
7.) Shipment shall be made using the carrier specified on the purchase order, with freight pre-paid and added to the invoices
submitted to Buyer for payment or charged directly to buyer’s account. When a carrier is not specified, shipment shall be made by
the carrier selected at the discretion of AEROFLEX.
8.) WARRANTY. AEROFLEX warrants its products from its date of shipment and for the period of 1 year to be free from defects
caused by faulty materials or poor workmanship, provided:
a.) AEROFLEX is notified in writing by Buyer of such defect prior to the expiration of the warranty period; and
b.) After receiving return authorization from AEROFLEX, the defective item is returned to AEROFLEX, Eatontown, New Jersey,
with transportation charges prepaid by Buyer; and
c.) AEROFLEX's examination of such unit shall disclose to its satisfaction that such defect(s) exist and have not been caused
by misuse, neglect, improper installation, improper storage, repair alteration or accident; and
d.) An Evaluation Fee will be charged to Buyer to cover inspection and testing costs for any item returned by Buyer under this
paragraph which is found to be within specifications and/or otherwise not the responsibility of AEROFLEX under the terms
and conditions of this paragraph or any other part of this Agreement.
THE LIABILITY OF AEROFLEX UNDER THIS WARRANTY IS LIMITED TO REPLACING, REPAIRING, OR ISSUING A CREDIT, AT ITS
OPTION, FOR ANY SUCH ITEM RETURNED BY BUYER UNDER THE TERMS OF THIS WARRANTY. IN NO EVENT SHALL
AEROFLEX BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE. THIS IS THE SOLE WARRANTY
MADE BY AEROFLEX. NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE MADE BY AEROFLEX. AEROFLEX SPECIFICALLY
DISCLAIMS ALL OTHER WARRANTIES.
9.) PRODUCT IMPROVEMENT AND/OR DESIGN CHANGES. AEROFLEX expressly reserves the right to make product improvements
and/or design changes to any of its products without incurring any obligation or liability to make the same changes or improvements
to any items sold previously.
10.) PRODUCT SPECIFICATIONS. Published specifications whether contained herein or in any other materials or documents
distributed to Buyer by AEROFLEX do not become final or binding on AEROFLEX until approved by AEROFLEX. AEROFLEX expressly
reserves the right to change or modify specifications at any time without prior notice.
11.) SPECIAL TOOLING. Any and all special tooling that is purchased, designed, or constructed by AEROFLEX, for the purpose of
filling this order shall be and shall remain the property of AEROFLEX.
w w w. a e r o f l e x . c o m / a c c
|
1 - 7 3 2 - 4 6 0 - 0 2 12
| 79
Index
Terms and Conditions of Sale
12.) TAXES. Any state, local or use tax, or other governmental charge imposed upon the items sold hereunder shall be paid by the
Buyer. Buyer shall also make any and all necessary reports and filings required in connection with any such taxes or charges. Failure
of the Buyer to comply with the terms of this paragraph shall be a breach of this entire Agreement.
13.) ASSIGNMENT AND DELEGATION. Buyer may not assign any of its rights nor delegate any of its duties hereunder without the
express written consent of AEROFLEX.
14.) SELLER'S AGENTS. The Buyer acknowledges that he has been advised that no agent, employee, or representative of the Seller
has any authority to bind the Seller to any affirmation, promise, representation, or warranty is specifically set forth in this Agreement.
It does not form a basis of this agreement and shall not be enforceable against the Seller.
15.) CANCELLATION. This Agreement may not be cancelled in whole or in part without the written consent of AEROFLEX. Such
consent shall in no event be given unless Buyer pays to AEROFLEX, AEROFLEX s costs and expenses (including without limitation,
the cost of materials, labor, engineering expense, overhead and all commitments to its suppliers and subcontractors) plus profit, all
as determined by AEROFLEX.
16.) ENTIRE AGREEMENT. This Agreement states and constitutes the entire agreement between the parties, hereto and all prior
communications, representations and agreements, written or oral between Buyer and AEROFLEX are superseded by this Agreement.
No other statements, representation, covenant or warranty not contained herein shall be binding on AEROFLEX.
17.) AMENDMENT AND MODIFICATION. No provision, term or condition of this Agreement may be waived, modified, amended,
varied or supplemented in any respect except in writing signed by an authorized representative of AEROFLEX. No invoice, purchase
order, voucher or other documents or materials submitted to AEROFLEX by Buyer shall amend, modify, vary or supplement this
Agreement. AEROFLEX's failure to object to any provision that conflicts with any provision, term or condition of this Agreement,
whether contained in Buyer’s purchase order or other documents or materials supplied to AEROFLEX by Buyer, shall not be
construed as an acceptance thereof or as a waiver of any provision, term or condition contained herein.
18.) NO IMPLIED WAIVERS. The failure of either party at any time to require performance by the other of any provision hereof shall
in no way affect the right to require performance at any time, thereafter, nor shall the waiver by either party of a breach of any
provision hereof be taken or held to be a waiver of any succeeding breach of such provision or as a waiver of the provision itself.
19.) SEPARABILITY AND SAVINGS. If any part of this Agreement is held invalid under the laws of New Jersey; such part shall be
waived and the balance of the Agreement shall continue in full force and effect.
20.) APPLICABLE LAW. Unless expressly modified or contradicted herein, all the rights and obligations of the parties shall be
governed by the Uniform Commercial Code as enacted in the State of New Jersey.
80 | w w w . a e r o f l e x . c o m / a c c | 1 - 7 3 2 - 4 6 0 - 0 2 12
AEROFLEX CONTROL COMPONENTS
Services & Certifications
• Hybrid micro-electronic assembly
• Wire Bonding & PCB assembly
• RF and microwave test to 40 GHz
• Product design
• ISO9001-2008 Certified
WEB SITE
TELEPHONE
E-MAIL
www.aeroflex.com/acc
1-732-460-0212
Our passion for performance is defined by three
attributes represented by these three icons:
solution-minded, performance-driven and customer-focused.
[email protected]
Part No. ACC1-6-10-11
Specifications are subject to change without notice.