DOMINANT Opto Technologies Innovating Illumination Power DomiLED TM DATA SHEET: Power DomiLEDTM InGaN White : DWW-DZKG TM With its significant power in terms brightness, viewing angle and variety of application possibilities, Power DomiLED™ truly is a standout performer! Ideal for automotive interior lighting as well as home, office and industrial applications, it is also a proven performer in electronic signs and signals. Features: > > > > > > > High brightness surface mount LED. 120° viewing angle. Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to IR reflow soldering. Environmental friendly; RoHS compliance. Superior corrosion resistance. Applications: > Automotive: Interior applications, eg: switches, telematics, climate control system, dashboard, etc. Exterior applications, eg: signal lighting, Center High Mounted Stop Light (CHMSL) > Signage: full colour display video notice board, signage, special effect lighting. > Industrial: white goods (eg: Oven, microwave, etc.), light bar, illuminated advertising. > Lighting: architecture lighting, general lighting, garden light, channel light. © 2005 DomiLED is a trademark of DOMINANT Opto Technologies. All rights reserved. Product specifications are subject to change without notice. 1 09/09/2014 V3.0 DOMINANT TM InGaN White : DWW-DZKG Opto Technologies Innovating Illumination Optical Characteristics (Tj=25˚C) Part Ordering Number Color Viewing Luminous Intensity @ 30mA IV (mcd) Angle˚ Min. Typ. Max. Total Flux @ 30mA mlm (Typ) DWW-DZKG-W2X-1 White 120 1400.0 2240.0 2850.0 6500.0 DWW-DZKG-W2X-JKPL White 120 1400.0 2240.0 2850.0 6500.0 DWW-DZKG-XY1-1 White 120 1800.0 2850.0 3550.0 8300.0 DWW-DZKG-XY1-JKPL White 120 1800.0 2850.0 3550.0 8300.0 NOTE 1. All part number above comes in a quantity of 2000 units per reel. 2. Luminous intensity is measured with an accuracy of ± 11%. 3. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. 4. InGaN wavelength is very sensitive to drive current. Operating at lower current is not recommended and may yield unpredictable performance. Current pulsing should be used for dimming purposes. Electrical Characteristics at Tj=25˚C Part Number Min. (V) DWW-DZKG 2.90 Vf @ If = 30mA Typ. (V) 3.20 Max. (V) 3.60 Forward voltages are measure using a current pulse of 1 ms and with an accuracy of ± 0.1V. Absolute Maximum Ratings Maximum Value Unit DC forward current 50 mA Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.1) 100 mA Not designed for reverse bias V ESD threshold (HBM) 4000 V LED junction temperature 125 ˚C Operating temperature -40 … +110 ˚C Storage temperature -40 … +125 ˚C 200 mW 300 K/W 180 K/W Reverse voltage; Ir (max) = 10µA Power dissipation (at room temperature) Thermal resistance - Junction / ambient, Rth JA - Junction / solder point, Rth JS (Mounting on FR4 with pad size >= 16 mm2 per pad) 2 09/09/2014 V3.0 DOMINANT TM InGaN White : DWW-DZKG Opto Technologies Innovating Illumination Characteristics Symbol Part Number Value Unit Temperature coefficient of VF (typ) IF = 30mA; 0 ˚C <= T <= 100 ˚C TCV DWW-DZKG -7.10 mV / K Temperature coefficient of IV (typ) TCIV DWW-DZKG -0.14 %/K Temperature coefficient of Cx (typ) IF = 30mA; 0 ˚C <= T <= 100 ˚C TCCx DWW-DZKG -0.00007 Temperature coefficient of Cy (typ) IF = 30mA; 0 ˚C <= T <= 100 ˚C TCCy DWW-DZKG -0.00003 IF = 30mA; 0 ˚C <= T <= 100 ˚C 3 09/09/2014 V3.0 DOMINANT TM InGaN White : DWW-DZKG Opto Technologies Innovating Illumination DWW, White Color Grouping For this color bin selection, part number will be DWW-DZKG-xxxx-1 Dominant White Bin Structure 0.44 0.42 0.40 E3 0.38 E4 E1 0.36 C3 0.34 C4 C1 0.32 C2 A3 0.30 A1 0.28 V3 0.26 V1 0.24 E2 A4 A2 V4 V2 0.22 0.20 0.18 0.16 0.24 0.26 0.28 0.3 0.32 0.34 0.36 Chromaticity coordinate groups are measured with an accuracy of ± 0.01. 1 2 3 4 Cx 0.2525 0.2650 0.2650 0.2525 Cy 0.2318 0.2525 0.2700 0.2493 Cx 0.2525 0.2650 0.2650 0.2525 Cy 0.2143 0.2350 0.2525 0.2318 Cx 0.2650 0.2775 0.2775 0.2650 Cy 0.2525 0.2732 0.2907 0.2700 Cx 0.2650 0.2775 0.2775 0.2650 Cy 0.2350 0.2557 0.2732 0.2525 Cx 0.2775 0.2900 0.2900 0.2775 Cy 0.2732 0.2939 0.3114 0.2907 Cx 0.2775 0.2900 0.2900 0.2775 Cy 0.2557 0.2764 0.2939 0.2732 Cx 0.2900 0.3025 0.3025 0.2900 Cy 0.2939 0.3146 0.3321 0.3114 Cx 0.2900 0.3025 0.3025 0.2900 Cy 0.2764 0.2971 0.3146 0.2939 Cx 0.3025 0.3150 0.3150 0.3025 Cy 0.3146 0.3354 0.3529 0.3321 Cx 0.3025 0.3150 0.3150 0.3025 Cy 0.2971 0.3179 0.3354 0.3146 Cx 0.3150 0.3275 0.3275 0.3150 Cy 0.3354 0.3561 0.3736 0.3529 Cx 0.3150 0.3275 0.3275 0.3150 Cy 0.3179 0.3386 0.3561 0.3354 Bin V1 V2 V3 V4 A1 A2 A3 A4 C1 C2 C3 C4 4 09/09/2014 V3.0 DOMINANT TM InGaN White : DWW-DZKG Opto Technologies Innovating Illumination Bin E1 E2 E3 E4 Bin 1 2 3 4 Cx 0.3275 0.3400 0.3400 0.3275 Cy 0.3561 0.3768 0.3943 0.3736 Cx 0.3275 0.3400 0.3400 0.3275 Cy 0.3386 0.3593 0.3768 0.3561 Cx 0.3400 0.3525 0.3525 0.3400 Cy 0.3768 0.3975 0.4150 0.3943 Cx 0.3400 0.3525 0.3525 0.3400 Cy 0.3593 0.3800 0.3975 0.3768 Dominant color coordinate is measured with an accuracy of ± 0.01. 5 09/09/2014 V3.0 005 825 960 955 100 970 070 120 386 426 386 591 484 571 484 730 205 956 197 131 288 081 288 282 582 715 582 792 DOMINANT TM InGaN White : DWW-DZKG Opto Technologies Innovating Illumination DWW, White Color Grouping For this color bin selection, part number will be DWW-DZKG-xxxx-JKPL 4 0.3045 0.2715 0.3005 0.2825 0.3130 0.2840 0.3100 0.2970 0.3386 0.3235 0.3386 0.3426 0.3484 0.3388 0.3484 0.3571 0.3130 0.2840 0.3100 0.2970 0.3205 0.2956 0.3197 0.3131 0.3582 0.3542 0.3582 0.3715 1 0.2960 0.2590 0.291 0.2680 0.3045 0.2715 0.3005 0.2825 0.3288 0.3081 0.3288 0.3282 0.3386 0.3235 0.3386 0.3426 0.3100 0.2970 0.3070 0.3120 0.3197 0.3131 0.3189 0.3302 0.3484 0.3388 0.3484 0.3571 Color Bin Structure 0.3900 0.3800 0.3700 PL 0.3600 OL 0.3500 NL 0.3400 0.3300 ML 0.3200 0.3100 JL KK KL NK NL OK OL LK LL MK ML PK PL NK LK KL 0.2900 KK JL 0.2800 0.2700 JK 0.2600 0.2500 0.2400 0.2300 0.2700 0.2800 0.2900 0.3000 0.3100 0.3200 0.3300 0.3400 0.3500 0.3600 0.3700 Chromaticity coordinate groups are measured with an accuracy of ± 0.01. 1 2 3 4 Cx 0.2960 0.2910 0.3005 0.3045 Cy 0.2590 0.2680 0.2825 0.2715 Cx 0.291 0.2850 0.2960 0.3005 Cy 0.2680 0.2790 0.2955 0.2825 Cx 0.3045 0.3005 0.3100 0.3130 Cy 0.2715 0.2825 0.2970 0.2840 Cx 0.3005 0.2960 0.3070 0.3100 Cy 0.2825 0.2955 0.3120 0.2970 Cx 0.3288 0.3288 0.3386 0.3386 Cy 0.3081 0.3282 0.3426 0.3235 Cx 0.3288 0.3288 0.3386 0.3386 Cy 0.3282 0.3453 0.3591 0.3426 Cx 0.3386 0.3386 0.3484 0.3484 Cy 0.3235 0.3426 0.3571 0.3388 Cx 0.3386 0.3386 0.3484 0.3484 Cy 0.3426 0.3591 0.3730 0.3571 Cx 0.3100 0.3197 0.3205 0.3130 Cy 0.2970 0.3131 0.2956 0.2840 Cx 0.3070 0.3189 0.3197 0.3100 Cy 0.3120 0.3302 0.3131 0.2970 Cx 0.3197 0.3288 0.3288 0.3205 Cy 0.3131 0.3282 0.3081 0.2956 Cx 0.3189 0.3288 0.3288 0.3197 Cy 0.3302 0.3452 0.3282 0.3131 Cx 0.3484 0.3484 0.3582 0.3582 Cy 0.3388 0.3571 0.3715 0.3542 Cx 0.3484 0.3484 0.3582 0.3582 Cy 0.3571 0.3730 0.3792 0.3715 Bin JK OK MK LL 0.3000 PK InGaN wavelength is very sensitive to drive current. Operating at lower current is not recommended and may yield unpredictable performance. Current pulsing should be used for dimming purposes. 6 09/09/2014 V3.0 DOMINANT TM InGaN White : DWW-DZKG Opto Technologies Innovating Illumination Luminous Intensity Group at Tj=25˚C Luminous Intensity IV (mcd) Brightness Group W2 1400.0 ... 1800.0 X1 1800.0 ... 2240.0 X2 2240.0 ... 2850.0 Y1 2850.0 ... 3550.0 Luminous intensity is measured with an accuracy of ± 11%. Vf Bining (Optional) Vf Bin @ 30 mA Forward Voltage (V) V0 2.70 ... 3.00 V1 3.00 ... 3.30 V2 3.30 ... 3.60 Forward Voltage, Vf is measured with an accuracy of ± 0.1 V. Please consult sales and marketing for special part number to incorporate Vf bining. 7 09/09/2014 V3.0 DOMINANT TM InGaN White : DWW-DZKG Opto Technologies Innovating Illumination Forward Voltage Vs Forward Current 1.6 4 1.4 3.5 1.2 3 Forward Voltage; V Relative Intensity; Normalized at 30mA Relative Intensity Vs Forward Current 1 0.8 0.6 0.4 2.5 2 1.5 1 0.2 0.5 0 0 0 10 20 30 40 50 0 10 20 30 40 50 Forward Current, mA Forward Current; mA Maximum Current Vs Ambient Temperature Relative Intensity Vs Wavelength 1 0.9 50 0.8 Relative Intensity Forward Current, mA 60 40 30 20 0.7 0.6 0.5 0.4 0.3 0.2 10 0.1 0 0 0 10 20 30 40 50 60 70 80 90 100 110 120 400 450 500 550 600 650 700 Wavelength, nm Ambient Temperature Radiation Pattern 30° 20° 10° 0° 1.0 40° 0.8 50° 0.6 60° 0.4 70° 0.2 80° 90° 0 8 09/09/2014 V3.0 PRELIMINARY UNDER DEVELOPMENT InGaN White : DWW-DZKG DOMINANT DOMINANT Opto Technologies TM Opto Technologies Innovating Illumination Engineering reference data are not verified. The specifications are subject to change without notice. Power DomiLED • InGaN White : DWW-DZKG Package Outlines TM Power DomiLED InGaN White – DWW-DZKG LED is protected by ESD device which is connected parallel to LED Chip. Material High brightness surface mount LED. 120 viewing angle. Material Small package outline (LxWxH) of 2.8 x 3.2 x 1.8 mm. Lead-frame Package Compatible Cu Alloy With Au Plating Qualified according to JEDEC moisture sensitivity Level 2. High soldering. Temperature Resistant Plastic, PPA to both IR reflow soldering and TTW Superior corrosion resistant. Encapsulant Silicone Resin Soldering Leads Au Plating 9 20/01/13 PowerDomiLED DWW-DZKG -InGaN- Catalogue-pv1 09/09/2014 V3.0 Page 1 of 9 DOMINANT TM InGaN White : DWW-DZKG Opto Technologies Innovating Illumination Recommended Solder Pad 10 09/09/2014 V3.0 DOMINANT TM InGaN White : DWW-DZKG Opto Technologies Innovating Illumination Taping and orientation • Reels come in quantity of 2000 units. • Reel diameter is 180 mm. 11 09/09/2014 V3.0 DOMINANT TM InGaN White : DWW-DZKG Opto Technologies Innovating Illumination Packaging Specification 12 09/09/2014 V3.0 DOMINANT TM InGaN White : DWW-DZKG Opto Technologies Innovating Illumination Packaging Specification Moisture sensitivity level Barcode label DOMINANT ROHS Compliant LOT NO : lotno PB Free PART NO : partno QTY : product quantity per reel S/N : serial no D/C: date code GROUP : group Reel Label Moisture absorbent material + Moisture indicator The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Average 1pc Power DomiLED 1 completed bag (2000pcs) 0.034 0.034 190 ± 10 190 10 Weight Weight(gram) (gram) Cardboard Box DOMINANT TM For Power DomiLED Cardboard Box Size TM Dimensions (mm) Empty Box Weight (kg) Reel / Box Quantity / Box (pcs) Small 300 x 250 x 250 0.58 15 reels MAX 30,000 MAX Large 416 x 516 x 476 1.74 96 reels MAX 192,000 MAX 13 09/09/2014 V3.0 DOMINANT TM InGaN White : DWW-DZKG Opto Technologies Innovating Illumination Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 255-260˚C 10-30s 275 250 225 Temperature (˚C) Ramp-up 3˚C/sec max. 217˚C 200 60-150s 175 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-180s 50 25 480s max 0 50 100 150 200 Time (sec) 14 09/09/2014 V3.0 DOMINANT TM InGaN White : DWW-DZKG Opto Technologies Innovating Illumination Revision History Page Subjects Date of Modification - Initial Release 26 Apr 2013 2, 3 Add new partno: DWW-DZKG-W2X-JKPL, DWW-DZKG-XY1-JKPL Add color bin structure 11 Jun 2013 3 Add Characteristics 09 Sep 2014 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Opto Technologies does not assume any liability arising out of the application or use of any product described herein. DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function or design. DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies. 15 09/09/2014 V3.0 DOMINANT TM Opto Technologies InGaN White : DWW-DZKG Innovating Illumination About Us DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: DOMINANT Opto Technologies Sdn. Bhd Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia. Tel: +606 283 3566 Fax: +606 283 0566 E-mail: [email protected] DOMINANT Opto Technologies Innovating Illumination TM