Power DomiLED InGaN White DWW-KZKG - Catalogue-v2

DOMINANT
Opto Technologies
Innovating Illumination
Power DomiLED
TM
DATA SHEET:
Power DomiLEDTM
InGaN White : DWW-KZKG
TM
With its significant power in terms brightness, viewing angle and variety of
application possibilities, Power DomiLED™ truly is a standout performer!
Ideal for automotive interior lighting as well as home, office and industrial
applications, it is also a proven performer in electronic signs and signals.
Features:
>
>
>
>
>
>
>
High brightness surface mount LED.
120° viewing angle.
Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm.
Qualified according to JEDEC moisture sensitivity Level 2.
Compatible to IR reflow soldering.
Environmental friendly; RoHS compliance.
Built in ESD protection.
Applications:
> Automotive:
Exterior applications, eg: signal lighting, Center High Mounted Stop Light
(CHMSL)
> Industrial: white goods (eg: Oven, microwave, etc.), light bar, illuminated
advertising.
> Lighting: architecture lighting, general lighting, garden light, channel light.
© 2005 DomiLED is a trademark of DOMINANT Opto Technologies.
All rights reserved. Product specifications are subject to change without notice.
1
26/02/2015 V2.0
DOMINANT
TM
InGaN White : DWW-KZKG
Opto Technologies
Innovating Illumination
Optical Characteristics (Tj=25˚C)
Part Ordering
Number
Color
DWW-KZKG-Y2Z-1
White
Viewing
Angle˚
Luminous Intensity @ 60mA IV (mcd)
Min.
Typ.
Max.
3550.0
120
5600.0
7150.0
NOTE
1. All part number above comes in a quantity of 2000 units per reel.
2. Luminous intensity is measured with an accuracy of ± 11%.
3. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel.
4. InGaN wavelength is very sensitive to drive current. Operating at lower current is not recommended and may yield unpredictable performance.
Current pulsing should be used for dimming purposes.
Electrical Characteristics at Tj=25˚C
Part Number
DWW-KZKG
Min. (V)
Vf @ If = 60mA
Typ. (V)
Max. (V)
2.90
3.10
3.50
Forward voltages are measure using a current pulse of 1 ms and with an accuracy of ± 0.1V.
Absolute Maximum Ratings
Maximum Value
Unit
DC forward current
80
mA
Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.1)
120
mA
Not designed for reverse bias
V
ESD threshold (HBM)
4000
V
LED junction temperature
150
˚C
Operating temperature
-40 … +110
˚C
Storage temperature
-40 … +125
˚C
300
mW
280
K/W
130
K/W
Reverse voltage; Ir (max) = 10µA
Power dissipation (at room temperature)
Thermal resistance
- Junction / ambient, Rth JA
- Junction / solder point, Rth JS
(Mounting on DOMINANT standard PCB)
2
26/02/2015 V2.0
DOMINANT
TM
InGaN White : DWW-KZKG
Opto Technologies
Innovating Illumination
Characteristics
Symbol
Part Number
Value
Unit
Temperature coefficient of VF (typ)
IF = 60mA; 0 ˚C <= T <= 100 ˚C
TCV
DWW-KZKG
-4.4
mV / K
Temperature coefficient of IV (typ)
TCIV
DWW-KZKG
-0.21
%/K
Temperature coefficient of Cx (typ)
IF = 60mA; 0 ˚C <= T <= 100 ˚C
TCCx
DWW-KZKG
-0.0001
Temperature coefficient of Cy (typ)
IF = 60mA; 0 ˚C <= T <= 100 ˚C
TCCy
DWW-KZKG
-0.0001
IF = 60mA; 0 ˚C <= T <= 100 ˚C
3
26/02/2015 V2.0
DOMINANT
TM
InGaN White : DWW-KZKG
Opto Technologies
Innovating Illumination
DWW, White Color Grouping
Color Bin Structure
0.3900
0.3800
0.3700
PL
0.3600
OL
PK
0.3500
0.3400
NL
0.3300
ML
0.3200
0.3100
LL
OK
NK
MK
0.3000
LK
KL
0.2900
0.2800
KK
JL
0.2700
JK
0.2600
0.2500
0.2400
0.2300
0.2700
0.2800
0.2900
0.3000
0.3100
0.3200
0.3300
0.3400
0.3500
0.3600
0.3700
Chromaticity coordinate groups are measured with an accuracy of ± 0.01.
1
2
3
4
Cx
0.2910
0.2960
0.3044
0.3004
Cy
0.2680
0.2590
0.2718
0.2830
Cx
0.2850
0.2910
0.3004
0.2960
Cy
0.2790
0.2680
0.2830
0.2956
Cx
0.3004
0.3044
0.3128
0.3100
Cy
0.2830
0.2718
0.2848
0.2982
Cx
0.2960
0.3004
0.3100
0.3070
Cy
0.2956
0.2830
0.2982
0.3122
Cx
0.3100
0.3128
0.3205
0.3197
Cy
0.2982
0.2848
0.2964
0.3137
Cx
0.3070
0.3100
0.3197
0.3189
Cy
0.3122
0.2982
0.3137
0.3303
Cx
0.3197
0.3205
0.3288
0.3288
Cy
0.3137
0.2964
0.3092
0.3282
Cx
0.3189
0.3197
0.3288
0.3288
Cy
0.3303
0.3137
0.3282
0.3453
Cx
0.3288
0.3288
0.3386
0.3386
Cy
0.3282
0.3092
0.3242
0.3427
Cx
0.3288
0.3288
0.3386
0.3386
Cy
0.3453
0.3282
0.3427
0.3592
Bin
JK
JL
KK
KL
LK
LL
MK
ML
NK
NL
4
26/02/2015 V2.0
DOMINANT
TM
InGaN White : DWW-KZKG
Opto Technologies
Innovating Illumination
1
2
3
4
Cx
0.3386
0.3386
0.3484
0.3484
Cy
0.3427
0.3242
0.3392
0.3571
Cx
0.3386
0.3386
0.3484
0.3484
Cy
0.3592
0.3427
0.3571
0.3730
Cx
0.3484
0.3484
0.3582
0.3582
Cy
0.3571
0.3392
0.3542
0.3716
Cx
0.3484
0.3484
0.3582
0.3582
Cy
0.3730
0.3571
0.3716
0.3792
Bin
OK
OL
PK
PL
InGaN wavelength is very sensitive to drive current. Operating at lower current is not recommended and may yield unpredictable
performance current pulsing should be used for dimming purposed.
5
26/02/2015 V2.0
DOMINANT
TM
InGaN White : DWW-KZKG
Opto Technologies
Innovating Illumination
Luminous Intensity Group at Tj=25˚C
Luminous Intensity
IV (mcd)
Brightness Group
Y2
3550.0 ... 4500.0
Z1
4500.0 ... 5600.0
Z2
5600.0 ... 7150.0
Luminous intensity is measured with an accuracy of ± 11%.
Vf Bining (Optional)
Vf Bin @ 60 mA
Forward Voltage (V)
V0
2.70 ... 3.00
V1
3.00 ... 3.30
V2
3.30 ... 3.60
Forward Voltage, Vf is measured with an accuracy of ± 0.1 V.
Please consult sales and marketing for special part number to incorporate Vf bining.
6
26/02/2015 V2.0
DOMINANT
TM
InGaN White : DWW-KZKG
Opto Technologies
Innovating Illumination
Relative Intensity, Normalized at 60mA
Relative Intensity; Normalized at 30mA
Relative Intensity; Normalized at 60mA
Relative
Intensity
Vs
Current
Relative
Intensity
Vs
Forward
Current
Relative
Intensity
VsForward
Forward
Current
Flux
Vs
Forward
Current
1.61.6 1.8
Col_2
1.4
0.80.8
2.5 2.5
1
2
0.8
11
0
1
0.5 0.5
0.5
0.20.2 0.2
0
2
2
1.5
1.5 1.5
0.40.4 0.4
0
3
3
2.5
1.2
0
Col_2
3
1.4
0.60.6 0.6
0
Variables
3.5 3.5
Forward Voltage; V
Forward Voltage, VF
Forward Voltage; V
Forward Voltage
1 1
4
3.54
Variables
1.4 1.6
1.21.2
Forward
Voltage
Current
Forward
Voltage
Forward
Current
Forward
Voltage
Vs Vs
Forward
VF
Vs
Forward
Current
0
0
0
10 20
20
20 40
30 60
40
60
40 80
80
0
50 100
100
0
0
0
10 20
20
Forward
Current;
mA
Forward
Current,
mA
Forward
Current,
mA
90 60 1
Col_2
0.8
Rja=280K/W
0.6
50 30 0.5
40
30
20
0.4
0.3
20 10 0.2
10
0
0.9
90
0.8
80
0.7
70
0.6
60
0.5
50
0.4
40
0.3
30
Forward Current, mA
60 40
0.2
20
0.1
0.1
10
0
0
0
0
40 80
80
50 100
100
1 100
Variables
0.9
0.7
60
Maximum
VsVs
Ambient
Temperature
Relative Current
Intensity
Wavelength
Relative Intensity
Forward Current (mA)
Forward Current, mA
Relative Intensity
70
30 60
IF (mA)
Relative
Intensity
VsTemperature
Wavelength
Maximum
Current
Vs
Ambient
Temperature
Max Current
Vs
Ambient
50
40
Forward
Current;
mA
Forward
Current;
mA
Forward
Current,
mA
Forward
Current,
mA
IF (mA)
80
20 40
0 400
10 20 30 40 500
50 60 70 80 600
90 100 110 120 700
0
10
400 0 450
10 20 30 40 50 60 70 80 90 100 110
Wavelength,
nm
Ambient
Temperature
2050030
40
60
550 50 600
7065080
90
700100
Ambient Temperature
Wavelength,
nm
Ambient Temperature,
°C
Col_1
Radiation Pattern
Max
Pulse
Current
vs Duty Cycle
20°
10°
0°
30°
1.0
300
Pulse Current; mA
40°
50°
60°
70°
80°
90°
0.8
250
200
0.6
150
0.4
100
0.2
50
0
0
1
10
Duty Cycle (%); Tp<=10ms
100
7
26/02/2015 V2.0
DOMINANT
TM
PRELIMINARY
InGaN
White : DWW-KZKG
UNDER DEVELOPMENT
Opto Technologies
DOMINANT Opto Technologies
Innovating Illumination
Engineering
reference data are not verified. The specifications are subject to
TM
Power DomiLED • InGaN Whitechange
: DWW-KZKG
Package Outlines
without notice.
Power DomiLED InGaN White – DWW-KZKG
Material 
High brightness surface mount LED for automotive exterior applications.
Material

120 viewing angle.

Small package outline (LxWxH) of 2.8 x 3.2 x 1.8 mm.

Qualified according to JEDEC moisture sensitivity Level 2.
Lead-frame
Package

High Temperature Resistant Plastic, PPA
Compatible to both IR reflow soldering and TTW
soldering.
 Superior
Encapsulant

Cu Alloy With Au Plating
corrosion resistant.
Silicone Resin
Built-in ESD protection.
Soldering Leads
20/04/14
Au Plating
8
PowerDomiLED DWW-KZKG -InGaN- Catalogue-pv1.docx
Page 1 of 9
26/02/2015 V2.0
DOMINANT
TM
InGaN White : DWW-KZKG
Opto Technologies
Innovating Illumination
Recommended Solder Pad
9
26/02/2015 V2.0
DOMINANT
TM
InGaN White : DWW-KZKG
Opto Technologies
Innovating Illumination
Taping and orientation
• Reels come in quantity of 2000 units.
• Reel diameter is 180 mm.
10
26/02/2015 V2.0
DOMINANT
TM
InGaN White : DWW-KZKG
Opto Technologies
Innovating Illumination
Packaging Specification
11
26/02/2015 V2.0
DOMINANT
TM
InGaN White : DWW-KZKG
Opto Technologies
Innovating Illumination
Packaging Specification
Moisture sensitivity level
Barcode label
DOMINANT
ROHS Compliant
LOT NO : lotno
PB Free
PART NO : partno
QTY : product quantity per reel S/N : serial no D/C: date code
GROUP : group
Reel
Label
Moisture absorbent material +
Moisture indicator
The reel, moisture absorbent material and moisture indicator are
sealed inside the moisture proof foil bag
Average 1pc Power DomiLED
1 completed bag (2000pcs)
0.034
0.034
190 ± 10
190
10
Weight
Weight(gram)
(gram)
Cardboard
Box
DOMINANT TM
For Power DomiLED
Cardboard Box
Size
TM
Dimensions (mm)
Empty Box
Weight (kg)
Reel / Box
Quantity / Box (pcs)
Small
300 x 250 x 250
0.58
15 reels MAX
30,000 MAX
Large
416 x 516 x 476
1.74
96 reels MAX
192,000 MAX
12
26/02/2015 V2.0
DOMINANT
TM
InGaN White : DWW-KZKG
Opto Technologies
Innovating Illumination
Recommended Pb-free Soldering Profile
Classification Reflow Profile (JEDEC J-STD-020D)
300
Min 260˚C
Min 30s
275
250
225
Temperature (˚C)
Ramp-up
3˚C/sec max.
217˚C
200
60-150s
175
150
125
Rampdown
6˚C/sec
max.
100
75
Preheat 60-120s
50
25
480s max
0
50
100
150
200
Time (sec)
13
26/02/2015 V2.0
DOMINANT
TM
InGaN White : DWW-KZKG
Opto Technologies
Innovating Illumination
Revision History
Page
Subjects
Date of Modification
-
Initial Release
13 Jan 2015
3
Add Characteristics
26 Feb 2015
NOTE
All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT
Opto Technologies does not assume any liability arising out of the application or use of any product described herein.
DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function
or design.
DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies.
14
26/02/2015 V2.0
DOMINANT
TM
Opto Technologies
Innovating Illumination
InGaN White : DWW-KZKG
About Us
DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED
Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries
and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs
are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art
manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More
information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com.
Please contact us for more information:
DOMINANT Opto Technologies Sdn. Bhd
Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia.
Tel: +606 283 3566 Fax: +606 283 0566
E-mail: [email protected]
DOMINANT
Opto Technologies
Innovating Illumination
TM