EURO EUROQUARTZ QUARTZ FREQUENCY CONTROL PRODUCTS FREQUENCYCONTROL CONTROLPRODUCTS PRODUCTS PRODUCT RANGE EUROQUARTZ PRODUCT RANGE EUROQUARTZ NEW PRODUCTS Euroquartz manufactures a comprehensive range of Euroquartz policy is to ensure that the product range frequency-control products. This catalogue contains offered is produced to the highest quality and is up-to- brief outline details of commonly used components. date in range and extent. Therefore, updated and new The Euroquartz website contains full specification products are continually under development. Details of details of the complete range of frequency-control new products and services are always available from components manufactured by Euroquartz. the Euroquartz website. www.euroquartz.co.uk CATALOGUE CONTENTS w w w. e u r o q u a r t z . c o . u k EURO QUARTZ CONTROL PRODUCTS PRODUCTS FREQUENCY CONTROL FREQUENCY CONTROL PRODUCTS 1 VCXO QUARTZ CRYSTALS SMD CRYSTALS Product Dimensions Frequency Page L x W x H (mm) Range (MHz) 49USMX 11.2 x 4.9 x 4.3 3 ~70 6 UM-1SMD 8.0 x 8.0 x 4.0 1 ~ 250 6 UM-5SMD 8.0 x 6.0 x 4.0 6 ~ 250 6 86SMX 13 x 5 x 5 3 ~ 100 6 MPS 12 x 4.5 x 4.3 3.58 ~75 6 MK 11.7 x 4.9 x 4.9 3.2 ~ 70 6 MQ 7 x 5 x 1.1 9 ~ 90 7 MF 6 x 3.5 x 1 12 ~ 100 7 FA 3.2 x 2.5 x 0.7 20 ~ 50 7 90SMX 9 x 4 x 2.7 32.768k 7 AG 7 x 1.5 x 1.4 32k ~ 75k 7 FC 5 x 1.9 x 0.9 32.768k 7 THROUGH-HOLE CRYSTALS HC49 11.6 x 4.8 x 13.6 HC50 11.6 x 4.8 x 13.6 HC49/4H 11.3 x 4.8 x 3.4 UM-1 8.0 x 3.4 x 8.0 UM-5 8.0 x 3.4 x 6.0 MIN. CYLINDER 3x8 MIN. CYLINDER 2x6 MIN. CYLINDER 3x8 MIN. CYLINDER 2x6 1 ~ 193 1 ~ 193 3.28 ~ 100 1 ~ 193 6 ~ 193 16k ~ 150k 16k ~ 150k 3.58 ~ 70 3.58 ~ 70 8 8 8 8 8 8 8 8 8 SMD OSCILLATORS HCMOS/TTL 91SMO 7 x 5 x 1.1 1 ~ 133 95SMO 7 x 5 x 1.1 1 ~ 70 90SMO 14 x 9.8 x 4.7 1 ~ 70 DIL14-SMD 20.4 x 12.8 x 5.1 30k ~ 133M DIL8-SMD 12.8 x 12.8 x 5.1 1 ~ 133 LPO-42 11.4 x 9.6 x 2.5 1Hz ~ 160k THROUGH-HOLE OSCILLATORS HCMOS/TTL 9 9 9 9 9 9 OSCILLATORS DIL14 DIL8 MIL.SPEC SG-51 SPG (Program.) LPO 20.4 x 12.8 x 5.1 30k ~ 133M 12.8 x 12.8 x 5.1 1 ~ 133 20.4 x 12.8 x 5.1 30k ~ 70M 19.8 x 6.36 x 5.3 1.025 ~ 26 20.5 x 6.65 x 4.5 0.00027~1 14 and 8 pin DIL 1Hz ~ 160k 10 10 10 10 10 10 19.44 ~ 250 19.44 ~ 250 19.44 ~ 250 19.44 ~ 250 19.44 ~ 250 11 11 11 11 11 1 ~ 156 1 ~ 156 1 ~ 156 1 ~ 156 1 ~ 156 12 12 12 12 12 OSCILLATORS ECL/PECL EQXO-1000P 14 DIL HPE-615 14 DIL 5 pin HPE-614 14 DIL 6 pin HPE-64 SMD 6 pad HPE-57 SMD 5 x 7 x 2.5 SINE WAVE OSCILLATORS EQSXO-1000 EQSXO-1000GW EQCXO-1000 EQCXO-1000GW HCS-44 14 DIL SMD 14 DIL 14 DIL SMD 14 DIL SMD 4 pad Detailed specifications for all products are available from the Euroquartz website: www.euroquartz.co.uk Product Package Style THROUGH-HOLE VCXO EQVCXO-1000 VCXO-1000 VCXO-2000 VCXO-3000 VCXO-4000 14 DIL 14 DIL 8 DIL 21.3 x 11.7 x 4.7 18.3 x 11.7 x 4.7 Frequency Page Range (MHz) 8 ~ 30 500k ~ 160M 500k ~ 160M 500k ~ 160M 500k ~ 160M 13 13 13 13 13 VCXO SMD HCMOS/TTL VCXO-5000 SMD 4 pad 500k ~ 160M VCXO-6000 SMD 6 pad 500k ~ 160M VCXO-97000 SMD 7 x 5mm 500k ~ 160M VCXO ECL/PECL 14 14 14 GP-414 GP-64 GP-57 14 DIL SMD 6 pad SMD 7 x 5mm 20 ~ 200 20 ~ 200 20 ~ 200 14 14 14 1 ~ 60 1 ~ 60 1 ~ 60 1 ~ 60 1 ~ 60 1 ~ 60 1 ~ 60 1 ~ 60 1 ~ 60 1 ~ 60 1 ~ 60 1 ~ 60 15 15 15 15 15 15 16 16 16 16 16 16 TCXO TCXO HCMOS/CLIPPED SINE M38 14 DIL Compat. M39 14 DIL Compat. M47 SMD 14 DIL M14 14 DIL M24 SMD 14 DIL M15 14 DIL M25 14 DIL M42 SMD 4 Pad M44 SMD 4 Pad M62 SMD 6 Pad M64 SMD 6 Pad M57 SMD 7 x 5mm OCXO OC14 OC24 14 DIL 14 DIL SMD 1 ~ 156 1 ~ 156 17 17 MONOLITHIC CRYSTAL FILTERS MCF HC49/T, UM-1/5, MCF MCF HC49/T, UM-1/5, MCF MCF HC49/T, UM-1/5, MCF 10.7MHz 21.4MHz 45MHz 18 19 19 FILTERS 20 CUSTOM FILTERS RESONATORS ZTA ZTT ZTB ZTBF Coaxial Dielectric Ceramic Res. Ceramic Res. with caps. Ceramic Res. Ceramic Res. SMD ¼ wavelength coax. res. Disk and cylinder type 2 ~ 25MHz 2 ~ 25MHz 190 ~ 1250kHz 375 ~ 1250kHz 380 ~ 1000MHz 1 ~ 25.5GHz 21 21 21 21 21 21 CUSTOM PARTS - Contact Euroquartz Sales email: [email protected] tel: +44 (0)1460 230000 fax: +44 (0)1460 230001 Stability over Temperature Range 49USMX Metal case on composite plastic base Hermetic Seal 11.2 x 4.9 x 4.3 4.3 11.2 Fundamental 3.0 to 40 Third Overtone 25 to 70 ±10ppm to ±100ppm From ±20ppm to ±100ppm over 0° to +50C° ~ -40° to +90°C 4.9 4.2 UM-1 SMD 0.6 4.0 8.0 1.2 Ø0.35 8.0 12.5 1.45 2.0 3.75 Fundamental Metal can 1.0 to 45 Resistance weld Hermetic seal in Third Overtone 21 to 135 an inert atmosphere. Glass Fifth Overtone 60 to 192 to metal seals Seventh Overtone 125 to 250 8.0 x 8.0 x 4.0 ±3ppm to ±50ppm From ±3ppm to ±50ppm over 0° to +50°C ~ -55° to +105°C Notes Availability Economical crystal Can be supplied in 2.5mm height All standard frequencies and specifications in stock 3 lead base with centre earth wire available Available made to order on quick turnround 8.0 UM-5 SMD 0.6 1.45 4.0 6.0 10.5 1.2 Ø0.35 3.0 8.0 3.75 Fundamental Metal can 6.0 to 45 Resistance weld Hermetic seal in Third Overtone 21 to 135 an inert atmosphere. Glass Fifth Overtone 60 to 192 to metal seals Seventh Overtone 125 to 250 8.0 x 6.0 x 4.0 ±3ppm to ±50ppm From ±3ppm to ±50ppm over 0° to +50°C ~ -55° to +105°C ±30ppm to ±100ppm From ±50ppm to ±100ppm over 0° to 50°C ~ -40 to +85°C Industrystandard part. Stocked in all standard frequencies ±30ppm to ±100ppm From ±50ppm to ±100ppm over 0° to 50°C ~ -40° to +85°C Functionally and pad compatible with 86SMX High Tg, good thermal matching Available on short lead times ±10ppm to ±30ppm From ±10ppm to ±100ppm over 0° ~ +50°C ~ -40° ~ +85°C Low frequencies from 3.2MHz in true SMD package Available on short lead times 86SMX 13.1 Plastic Encapsulated 13 x 5 x 5 5.0 9.4 5.0 Fundamental 3.0 to 32 Third Overtone 32 to 100 3 lead base with centre earth wire available Available made to order on quick turnround 1.2 1.6 MPS 12.0 4.25 1.20 9.4 2.10 Metal case on Fundamental composite base 3.579 to 45 Hermetically sealed Third Overtone 25 to 75 12 x 4.5 x 4.25 0.8 MK 11.7 2.0 2.0 1.1 4.9 2.9 Metal case on composite base Fundamental Hermetically sealed 3.2 to 40 High Tg, good Third Overtone thermal matching 25 to 70 11.7 x 4.9 x 4.9 5.0 EUROQUARTZ LIMITED Blacknell Lane, CREWKERNE Somerset UK. TA18 7HE FREQUENCY CONTROL PRODUCTS Tolerance at 25°C 2 FREQUENCY CONTROL PRODUCTS Mode Frequency Range (MHz) EURO QUARTZ Description Dimensions (mm) Part Outline w w w. e u r o q u a r t z . c o . u k QUARTZ CRYSTAL UNITS - SURFACE-MOUNT EURO QUARTZ C R Y S TA L S EURO EUROQUARTZ QUARTZ FREQUENCY CONTROL PRODUCTS FREQUENCYCONTROL CONTROLPRODUCTS PRODUCTS C R Y S TA L S QUARTZ CRYSTAL UNITS - SURFACE-MOUNT Description Dimensions (mm) Part Outline MQ 1.0 w w w. e u r o q u a r t z . c o . u k 2.54 5.0 1.0 1.4 3.5 0.9 1.5 FA 4 3 1 2 3.2 2.5 0.7 Ceramic 3.2 x 2.5 x 0.7 Fundamental 20.0 to 50.0 ±50ppm From ±12ppm Other tolerances over -20° to +70°C upon request Plastic Encapsulated 9 x 4 x 2.65 Fundamental 32.768kHx to 75.000kHz Plastic 7 x 1.5 x 1.4 Ceramic 5 x 1.9 x 0.9 0.7 0.8 Ultra miniature crystal for high density applications 1.2 0.9 90SMX From ±20ppm Temperature coefficient -0.04x10 /°C -40° to +85°C Industrystandard watch crystal 32.768kHz Stocked in several variants Fundamental 32.768kHx to 75.000kHz From ±20ppm Temperature coefficient -0.04x10 /°C -40° to +85°C Ultra miniature watch crystal 32.768kHz Fundamental 32.768kHz From ±20ppm Temperature coefficient -0.04x10 /°C -40° to +85°C Ultra miniature watch crystal 32.768kHz 9.0 2.65 5.5 1.0 -6 2 4.10 AG 0.3 #4 0.55 #3 1.5 #1 0.2 EURO QUARTZ Fundamental 12.0 to 50.0 Third Overtone 40 to 100 3.0 #2 7.0 1.4 CONTROL PRODUCTS PRODUCTS FREQUENCY CONTROL FREQUENCY CONTROL PRODUCTS Ceramic Micro-miniature 6 x 3.5 x 1.0 MF 6.2 Notes Availability Ultra miniature crystal for PCMCIA etc. From ±5ppm to From ±3ppm Available with ±30ppm over -30° to +85°C tight tolerances Short delivery leadtimes 1.6 4.60 Stability over Temperature Range Fundamental 9.0 to 40.0 Third Overtone 30 to 90 Ceramic Miniature 7 x 5 x 1.1 1.1 Tolerance at 25°C Miniature lowprofile crystal for PCMCIA etc. From ±5ppm to From ±10ppm Available with ±30ppm over -30° to +85°C tight tolerances Short delivery leadtimes 7.0 1.2 3 Mode Frequency Range (MHz) 0.15 0.4 -6 2 FC 1.9 5.0 0.9 0.65 #1 #2 -6 2 3.2 Detailed specifications for all products are available from the Euroquartz website: www.euroquartz.co.uk email: [email protected] tel: +44 (0)1460 230000 fax: +44 (0)1460 230001 11.3 4.8 13.6 12.5 ø0.43 4.88 HC50 11.3 4.8 13.6 ø1.02 6.05 Fundamental 1 to 40 Metal can Third Overtone Hermetic Seal 21 to 105 Glass to metal Fifth Overtone seals 50 to 137 Seventh Overtone 13.6 x 11.6 x 4.8 100 to 193 Stability over Temperature Range Notes Availability ±3ppm to ±50ppm Industry-standard crystal, low cost Tight tolerances available ±3ppm to ±50ppm Centre earth wire over if required 0° to +50° to -55° to +105°C All standard frequencies in stock ±3ppm to ±50ppm Plug-in version of HC49 ±3ppm to ±50ppm Tight tolerances available 0° to +50° to Available made -55° to +105°C to order within a few days ±10ppm to ±100ppm Same footprint as HC49 but lower height (4 or 3mm) ±10ppm to ±50ppm Industry-standard low-cost 0° to +50° to -55° to +105°C Stocked in all standard frequencies ±3ppm to ±50ppm Industry-standard particularly in comms. industry ±3ppm to ±50ppm Tight tolerances Centre earth wire 0° to +50° to when required -55° to +105°C Available from stock or made-toorder on short lead times ±3ppm to ±50ppm Industry-standard comms. industry ±3ppm to ±50ppm Tight tolerances Centre earth wire 0° to +50° to when required -55° to +105°C Available madeto-order on short lead times 4.88 HC49/4H 11.3 4.8 3.5 12.5 ø0.43 4.88 Metal can Hermetic Seal Glass to metal seals 3.5 x 11.3 x 4.8 Fundamental 3.276 to 50 Third Overtone 27 to 100 Metal can Hermetic Seal Glass to metal seals 8.0 x 8.0 x 3.4 Fundamental 1 to 45 Third Overtone 21 to 135 Fifth Overtone 60 to 138 Seventh Overtone 100 to 193 Metal can Hermetic Seal Glass to metal seals 6.0 x 8.0 x 3.4 Fundamental 6 to 45 Third Overtone 21 to 135 Fifth Overtone 60 to 138 Seventh Overtone 100 to 193 Cylindrical metal can Press sealedl Two main types: 3x8 and 2x6 X-cut 32.768kHz and 16kHz to 150kHz AT-Cut 3.579MHz to 70 UM-1 7.9 3.4 8.0 12.7 Ø0.37 3.75 UM-5 7.9 3.4 6.0 Ø0.37 3.75 12.7 Miniature Cylinder Ø2.0 Ø3.1 9.0 1.1 8.0 6.0 1.1 X-cut Temperature Coefficient: -0.04x10 /°C -40° to +85°C AT-cut 5ppm to 50ppm 0° to 50°C -10° to +60°C -6 ±5ppm to ±50ppm 2 X-cut Range includes standard watch crystal 32.768kHz Stocked for immediate delivery EUROQUARTZ LIMITED Blacknell Lane, CREWKERNE Somerset UK. TA18 7HE FREQUENCY CONTROL PRODUCTS Fundamental 1 to 40 Metal can Overtone Hermetic Seal Third 21 to 105 Glass to metal Fifth Overtone seals 50 to 137 Overtone 13.6 x 11.6 x 4.8 Seventh 100 to 193 Tolerance at 25°C 4 FREQUENCY CONTROL PRODUCTS HC49 Mode Frequency Range (MHz) EURO QUARTZ Description Dimensions (mm) Part Outline w w w. e u r o q u a r t z . c o . u k QUARTZ CRYSTAL UNITS - THROUGH-HOLE EURO QUARTZ C R Y S TA L S EURO EUROQUARTZ QUARTZ FREQUENCY CONTROL PRODUCTS FREQUENCYCONTROL CONTROLPRODUCTS PRODUCTS O S C I L L ATO R S OSCILLATORS HCMOS/TTL - SURFACE-MOUNT Description Dimensions Output Part Outline 91SMO 1.1 7.0 w w w. e u r o q u a r t z . c o . u k 5.0 1.0 2.54 1.2 Ceramic Seam-welded lid 7 x 5 x 1.1mm HCMOS/TTL Stability/ Operating Temp. Range Commercial 1MHz to 133MHz 1.6 4.60 ±20 to ±100ppm 0° to +70°C Industrial ±50 to ±100ppm -40° to +85°C 95SMO 1.1 7.0 5.0 1.0 2.54 1.2 Ceramic Seam-welded lid 7 x 5 x 1.1mm HCMOS/TTL 1.25MHz to 70MHz Military ±50 to ±100ppm -55° to +125°C 1.6 4.60 90SMO 14.0 4.7 5.09 3 4 1 2 9.8 Commercial ±50 to ±100ppm Plastic encapsulated 0° to +70°C 14 x 9.85 x 4.7mm 1MHz to 70MHz Industrial ±50 to ±100ppm HCMOS/TTL -40° to +85°C Load Supply V. Options Notes Availability 10LSTTL/15pF 5V or 3.3V Enable/disable Standby Industry-standard SMD oscillator All standard frequencies stocked, MTO on short delivery leadtimes Military temp. range version of 2TTL/15pF 91SMO 5V or 3.3V Ideal oscillator for defence-related Enable/disable applications Standby MIL-O-55310 testing available EURO QUARTZ 10TTL/50pF 5V or 3.3V Enable/disable Gull-wing SMD form of 14 pin DIL Low-cost Available MTO on short delivery leadtimes 10TTL/50pF 5V or 3.3V Enable/disable Gull-wing SMD form of 8 pin DIL Low-cost Available MTO on short delivery leadtimes 2 x HCMOS 5V or 3.3V Enable/disable Ideal for battery operated equipment Power consumption from 6.5mA MTO on short lead times Commercial DIL14-SMD 20.4 Metal can Hermetic Seal 20.4 x 12.8 x 5.1mm 5.1 0.45 0.08 15.24 12.8 7.62 DIL8-SMD 12.8 5.1 0.8 7.62 12.8 CONTROL PRODUCTS PRODUCTS FREQUENCY CONTROL FREQUENCY CONTROL PRODUCTS 10TTL/50pF 5V or 3.3V Enable/disable Industry-standard SMD oscillator All standard frequencies stocked MTO on short delivery leadtimes 1.0 7.62 5 Frequency Range 7.0 4 1 3 2 9.6 4.7 30kHz to 133MHz Military HCMOS/TTL Metal can Hermetic Seal 12.8 x 12.8 x 5.1mm HCMOS/TTL Industrial ±25 to ±100ppm -40° to +85°C ±50 to ±100ppm -55° to +125°C Commercial ±15 to ±100ppm 0° to +70°C 1MHz to 133MHz ±25Industrial to ±100ppm -40° to +85°C Military ±50 to ±100ppm -55° to +125°C HCMOS LPO-42 5.08 ±15 to ±100ppm 0° to +70°C 11.4 VERY LOW POWER Metal can Hermetic Seal Leaded versions also available 1Hz to 160kHz Detailed specifications for all products are available from the Euroquartz website: www.euroquartz.co.uk ±10 to ±100ppm 0° to +70°C -40° to +85°C email: [email protected] tel: +44 (0)1460 230000 fax: +44 (0)1460 230001 5.1 6.8 0.45 0.8 15.24 12.8 7.62 DIL8 12.9 5.1 4.0 7.62 7.62 12.9 MIL SPEC Pin 1 15.24 Ø0.45 SG-51 Plastic Package 14 pin DIP 19.8 x 6.36 x 5.3mm 6.36 7 19.8 5.3 15.24 SPG 6.65 20.5 Plastic Package 16 pin DIP 20.5 x 6.65 x 4.5mm 8 4.5 LPO 1 7 4 1 7.62 14 15.24 8 8 5.0 0.9 Industrial 1MHz to 133MHz ±25 to ±100ppm -40° to +85°C Military ±50 to ±100ppm -55° to +125°C Industrial 7.62 30kHz to 70MHz 5 ±25 to ±100ppm -40° to +85°C Military ±50 to ±100ppm -55° to +125°C 1.025MHz to 26MHz 0.00027Hz to 1MHz Commercial ±50 or ±100ppm -10° to +70°C Commercial ±50ppm -10° to +70°C HCMOS VERY LOW POWER Metal can Hermetic Seal 14 pin DIL 8 pin DIL Also SMD 10TTL/50pF 5V or 3.3V Enable/disable Industry standard part, low-cost All standard frequencies stocked MTO on short lead times 10TTL/50pF 5V or 3.3V Enable/disable Industry standard part, low-cost All standard frequencies stocked MTO on short lead times 10TTL/50pF 5V High spec part for defence and space applications Full MIL testing available Short lead times 1Hz to 160kHz ±10 to ±100ppm 0° to +70°C -40° to +85°C 10TTL/50pF 5V Enable/disable 2TTL/15pF 5V 2 x HCMOS 5V or 3.3V Enable/disable Industry standard part, low-cost MTO on short lead times Multiple output oscillator Outputs software selectable All common parts in stock Ideal for battery operated equipment Power consumption from 6.5mA EUROQUARTZ LIMITED Blacknell Lane, CREWKERNE Somerset UK. TA18 7HE FREQUENCY CONTROL PRODUCTS Notes Availability Commercial Multiple Output HCMOS/TTL 9 16 1 Military ±50 to ±100ppm -55° to +125°C HCMOS/TTL 8 14 1 HCMOS/TTL ±15 to ±100ppm 0° to +70°C Metal can Hermetic Seal 20.4 x 12.8 x 5.1mm 7 8 5.08 5.08 30kHz to 133MHz ±25 to ±100ppm -40° to +85°C HCMOS/TTL 7.62 14 Industrial Metal can Hermetic Seal 20.4 x 12.8 x 5.1mm Metal can Hermetic Seal 12.8 x 12.8 x 5.1mm 0.8 Load Supply V. Options Commercial ±15 to ±100ppm 0° to +70°C HCMOS/TTL 20.4 Stability/ Operating Temp. Range 6 FREQUENCY CONTROL PRODUCTS DIL14 Frequency Range EURO QUARTZ Output Description Dimensions Part Outline w w w. e u r o q u a r t z . c o . u k OSCILLATORS HCMOS/TTL - THROUGH-HOLE EURO QUARTZ O S C I L L ATO R S EURO EUROQUARTZ QUARTZ FREQUENCY CONTROL PRODUCTS FREQUENCYCONTROL CONTROLPRODUCTS PRODUCTS E C L O S C I L L ATO R S OSCILLATORS ECL/PECL OUTPUT Output Package Frequency Range Part Outline EQXO-1000P ECL 20.4 5.1 6.8 14 pin DIL - 4 pin 0.45 19.44 to 250MHz 0.08 15.24 w w w. e u r o q u a r t z . c o . u k 12.8 7.62 0.08 15.24 1 7 12.8 7.62 14 9 8 1 3 7 14 12 8 12.8 7.62 HPE-64 6 5 4 3 19.44 to 250MHz 2 4.7 Tristate and complementary output options 0.5 EURO QUARTZ CONTROL PRODUCTS PRODUCTS FREQUENCY CONTROL FREQUENCY CONTROL PRODUCTS +3.3V SINGLE EQXO-1000P3 -3.3V COMPLEMENTARY EQXO-1000PC3 5V 5V 5V 3.3V 3.3V 3.3V SINGLE TRISTATE COMPLEMENTARY SINGLE TRISTATE COMPLEMENTARY 5-HPE514-NC 5-HPE514-TC 5-HPE514-CT 3-HPE514-NC 3-HPE514-TC 3-HPE514-CT 5V 5V 5V 3.3V 3.3V 3.3V COMP. and E/D COMPLEMENTARY TRISTATE COMP. and E/D COMPLEMENTARY TRISTATE 5-HPE614-NTC 5-HPE614-TNC 5-HPE614-CTN 3-HPE614-NTC 3-HPE614-THC 3-HPE614-CTN ±25, ±50 and ±100ppm 0° to +70°C -40° to +85°C 5V 5V 5V 3.3V 3.3V 3.3V SINGLE TRISTATE COMPLEMENTARY SINGLE TRISTATE COMPLEMENTARY 5-HPE64-N 5-HPE64-T 5-HPE64-C 3-HPE64-N 3-HPE64-T 3-HPE64-C ±25, ±50 and ±100ppm 0° to +70°C -40° to +85°C 5V 5V 5V 3.3V 3.3V 3.3V SINGLE TRISTATE COMPLEMENTARY SINGLE TRISTATE COMPLEMENTARY 5-HPE57-N 5-HPE57-T 5-HPE57-C 3-HPE57-N 3-HPE57-T 3-HPE57-C 0° to +70°C -40° to +85°C 0° to +70°C -40° to +85°C PECL 5.08 2 5 Gull-wing SMD versions also available Tristate and complementary output options 6 pad SMD 1 HPE-57 7 Gull-wing SMD versions also available Tristate or complementary output options PECL 7.0 5.0 EQXO-1000PC ±50 and 19.44 to 250MHz ±25, ±100ppm 0.45 0.08 15.24 1 6 COMPLEMENTARY 14 pin DIL - 6 pin 20.4 7.62 2.54 -5V ±25, ±50 and ±100ppm 0° to +70°C -40° to +85°C PECL HPE-614 5.1 6.8 EQXO-1000P ±50 and 19.44 to 250MHz ±25, ±100ppm 0.45 3 4 7x5mm 6 pad SMD 1.17 7.5 2.5 19.44 to 250MHz Tristate and complementary output options Model Number SINGLE 14 pin DIL - 5 pin 20.4 Output Type +5V PECL HPE-615 5.1 6.8 (Gull-wing SMD versions also available) Stability/ Operating Power Supply Temp. Range Detailed specifications for all products are available from the Euroquartz website: www.euroquartz.co.uk email: [email protected] tel: +44 (0)1460 230000 fax: +44 (0)1460 230001 The clipped sinewave output oscillators have an output of 1.0V peak to peak minimum with a choice of either through-hole DIL or SMD packages. Output Description Dimensions Part Outline EQSXO-1000 PURE SINEWAVE 20.4 5.1 6.8 0.45 15.24 0.08 12.8 7.62 EQSXO-1000GW 20.4 5.1 0.45 0.08 15.24 12.8 7.62 EQCXO-1000 0.45 0.08 15.24 12.8 7.62 EQCXO-1000GW 20.4 5.1 0.45 0.08 15.24 12.8 7.62 HCS-44 5.08 1 3 2 9.6 4.7 14 pin DIL Gullwing SMD Metal can Hermetic Seal 20.4 x 12.8 x 5.1mm 14 pin DIL Metal can Hermetic Seal 20.4 x 12.8 x 5.1mm PURE SINEWAVE 14 pin DIL Gullwing SMD Metal can Hermetic Seal 20.4 x 12.8 x 5.1mm CLIPPED SINEWAVE 7.0 4 PURE SINEWAVE CLIPPED SINEWAVE 20.4 5.1 6.8 14 pin DIL Metal can Hermetic Seal 20.4 x 12.8 x 5.1mm 11.4 Frequency Range + Supply Voltage - + V - 0.01µF Oscilloscope, Frequency Counter 14 8 E/D 7 50 Ohm coaxial + A - Stability/ Operating Temp. Range Commercial ±25 to ±100ppm 1MHz to 156MHz 0° to +70°C Industrial ±25 to ±100ppm -40° to +85°C Commercial ±25 to ±100ppm 1MHz to 156MHz 0° to +70°C Industrial ±25 to ±100ppm -40° to +85°C Commercial ±25 to ±100ppm 1MHz to 160MHz 0° to +70°C Industrial ±25 to ±100ppm -40° to +85°C Commercial ±25 to ±100ppm 1MHz to 160MHz 0° to +70°C Industrial ±25 to ±100ppm -40° to +85°C Commercial ±25 to ±100ppm 0° to +70°C 4 pad SMD 1MHz to 160MHz Industrial 9.6mm x 11.04mm ±25 to ±100ppm x 4.7mm -40° to +85°C Load Supply V. Options 0dBm into 50W 5V or 3.3V Enable/disable 0dBm into 50W 5V or 3.3V Enable/disable Notes Availability Industry standard package, low-cost Healthy output MTO on short lead times Industry standard package, low-cost Healthy output MTO on short lead times 10kW//15pf 1 Volt p-p 5V or 3.3V Enable/disable Industry standard package, low-cost 10kW//15pf 1 Volt p-p 5V or 3.3V Enable/disable Industry standard package, low-cost 10kW//15pf 1 Volt p-p 5V or 3.3V Enable/disable SMD Package MTO on short lead times MTO on short lead times MTO on short lead times EUROQUARTZ LIMITED Blacknell Lane, CREWKERNE Somerset UK. TA18 7HE 8 FREQUENCY CONTROL PRODUCTS CLIPPED SINEWAVE OSCILLATORS Sinewave Oscillator Test Circuit w w w. e u r o q u a r t z . c o . u k The Euroquartz range of sinewave output oscillators provides a full 0dB into 50W output oscillator in an industry-standard, 14 pin DIL package with harmonics <20dBc. EURO QUARTZ PURE SINEWAVE OSCILLATORS FREQUENCY CONTROL PRODUCTS SINEWAVE AND CLIPPED SINEWAVE OSCILLATORS EURO QUARTZ S I N E W A V E O S C I L L ATO R S EURO EUROQUARTZ QUARTZ FREQUENCY CONTROL PRODUCTS FREQUENCYCONTROL CONTROLPRODUCTS PRODUCTS VCXO VOLTAGE-CONTROLLED CRYSTAL OSCILLATORS w w w. e u r o q u a r t z . c o . u k A voltage-controlled crystal oscillator (VCXO) enables the output frequency to be varied (pulled) by means of an external control voltage. When this control voltage is an analogue of frequency the VCXO controls operating frequency. A block diagram of VCXO control and operation is shown opposite. Euroquartz manufactures a comprehensive range of voltage-controlled crystal oscillators to suit the majority of industry applications. The VCXO range embraces a wide frequency range from 500kHz to 160MHz. All-important is the choice of pull range, here Euroquartz offers either a narrow pull range of ±30ppm or a wide pull range of ±50ppm to ±300ppm as required. Available packages include standard through-hole dual-in-line packages and miniature SMD formats. Output Package Supply V. Part Outline EQVCXO-1000 20.4 5.1 6.8 0.45 HCMOS/TTL 0.8 15.24 12.8 7.62 VCXO-1000 20.4 5.1 6.8 0.45 0.8 12.8 7.62 VCXO-2000 14 pin DIL Metal can Hermetic Seal 3.3V or 5V 0.8 7.62 7.62 12.9 VCXO-3000 8 pin DIL Metal can Hermetic Seal 3.3V or 5V HCMOS/TTL 4.7 3.15 4.0 1 7 14 8 7.5 SMD Metal can 3.3V or 5V Amplifier Crystal Voltage Control Stability Temperature Range Pullability EURO QUARTZ CONTROL PRODUCTS PRODUCTS FREQUENCY CONTROL FREQUENCY CONTROL PRODUCTS ±50ppm or ±100ppm ±30ppm to ±200ppm Industry-standard package, low-cost Gull-wing SMD versions available Available MTO on short lead times ±30ppm to ±200ppm Industry-standard package, low-cost Gull-wing SMD versions available Available MTO on short lead times 500kHz to 160MHz ±30ppm to ±200ppm Industry-standard SMD package Llow-cost Available MTO on short lead times ±30ppm to ±200ppm Industry-standard package Low-cost Available MTO on short lead times Commercial ±10 to ±100ppm 0° to +70°C Industrial ±20 to ±100ppm -40° to +85°C Commercial ±10 to ±100ppm 0° to +70°C Industrial ±20 to ±100ppm -40° to +85°C Commercial 500kHz to 160MHz ±10 to ±100ppm 0° to +70°C Industrial ±20 to ±100ppm -40° to +85°C Notes Availability Industry-standard package, low-cost Gull-wing SMD versions available Available MTO within a few days Commercial 500kHz to 160MHz Output Varactor ±25 to ±100ppm 0° to +70°C 8MHz to 30MHz Industrial ±50 to ±100ppm -40° to +85°C HCMOS/TTL 12.9 5.1 4.0 14 pin DIL Metal can Hermetic Seal 5V Frequency Range HCMOS/TTL 15.24 11.7 9 VCXO Block Diagram VOLTAGE CONTROLLED CRYSTAL OSCILLATORS 21.3 VCXO-4000 4.7 Ø0.5 18.3 15.24 0.5 7.62 5.0 1 7 14 8 11.7 HCMOS/TTL Comaptible with 14 pin DIL Metal can Hermetic Seal 3.3V or 5V Commercial 500kHz to 160MHz Detailed specifications for all products are available from the Euroquartz website: www.euroquartz.co.uk ±10 to ±100ppm 0° to +70°C Industrial ±20 to ±100ppm -40° to +85°C email: [email protected] tel: +44 (0)1460 230000 fax: +44 (0)1460 230001 7.0 5.08 4 1 3 2 HCMOS/TTL 11.4 9.6 SMD 4 pad 3.3V or 5V Commercial 500kHz to 160MHz ±10 to ±100ppm 0° to +70°C Industrial Pullability Model Number ±30ppm to ±200ppm Industry-standard SDM package Available MTO on short lead times ±30ppm to ±200ppm Industry-standard SMD package Available MTO on short lead times ±30ppm to ±200ppm Industry-standard SMD package Low-cost Available MTO on short lead times ±20 to ±100ppm -40° to +85°C 4.7 VCXO-6000 6 5 4 3 7.62 2.54 HCMOS/TTL 1 11.4 2 4.7 SMD 6 pad 3.3V or 5V Commercial 500kHz to 160MHz 0.5 ±10 to ±100ppm 0° to +70°C Industrial ±20 to ±100ppm -40° to +85°C 9.6 VCXO-97000 5.08 5.0 2 5 1 6 3 4 2.6 7.0 GP-414 5.1 6.8 HCMOS/TTL 1.6 0.45 15.24 0.08 12.8 7.62 6 5 4 3 1 2 4.7 0.5 20MHz to 200MHz 6 pad SMD 5.0V (PECL) 3.3V (LVPECL) Complementary o/p and enable/disable available 20MHz to 200MHz SMD package Gull-wing SMD ±10 to ±100ppm ±80ppm 3.3V available 0° to +70°C ±100ppm 5.0V (Typical values) Linearity ±10% max. Industrial ±20 to ±100ppm Short delivery lead -40° to +85°C times 20MHz to 200MHz SMD package Gull-wing SMD ±10 to ±100ppm ±80ppm 3.3V available 0° to +70°C ±100ppm 5.0V (Typical values) Linearity ±10% max. Industrial ±20 to ±100ppm Short delivery lead -40° to +85°C times PECL GP-57 5.08 5.0 14 pin DIL 5.0V (PECL) 3.3V (LVPECL) Complementary o/p and enable/disable available 1 6 2 5 7.0 3 4 2.6 1.6 7mm x 5mm SMD 5.0V (PECL) 3.3V (LVPECL) Complementary o/p and enable/disable available Industrial ±20 to ±100ppm -40° to +85°C Industry-standard package Commercial Gull-wing SMD ±10 to ±100ppm ±80ppm 3.3V available 0° to +70°C ±100ppm 5.0V (Typical values) Linearity ±10% max. Industrial ±20 to ±100ppm Short delivery lead -40° to +85°C times PECL 7.0 7.62 2.54 500kHz to 160MHz PECL 20.4 GP-64 SMD 6 pad 7mm x 5mm 3.3V or 5V Commercial ±10 to ±100ppm 0° to +70°C Commercial Commercial EUROQUARTZ LIMITED Blacknell Lane, CREWKERNE Somerset UK. TA18 7HE FREQUENCY CONTROL PRODUCTS VCXO-5000 Stability Temperature Range FREQUENCY CONTROL PRODUCTS Frequency Range EURO QUARTZ Output Package Supply V. Part Outline w w w. e u r o q u a r t z . c o . u k VOLTAGE-CONTROLLED CRYSTAL OSCILLATORS EURO QUARTZ VCXO 10 EURO EUROQUARTZ QUARTZ FREQUENCY CONTROL PRODUCTS FREQUENCYCONTROL CONTROLPRODUCTS PRODUCTS TC X O TEMPERATURE-COMPENSATED CRYSTAL OSCILLATORS Part Outline M38 7.5 0.5 5.0 Ø0.5 18.4 w w w. e u r o q u a r t z . c o . u k 7.62 7 14 11.7 8 Frequency Range HCMOS/TTL CLIPPED SINE 1MHz to 60MHz 8MHz to 40MHz Package compatible with 14 pin DIL 3.3V or 5V Operating Temperature Temperature Stability Range Notes Availability EURO QUARTZ CONTROL PRODUCTS PRODUCTS FREQUENCY CONTROL FREQUENCY CONTROL PRODUCTS ±1ppm ±1.5ppm ±2ppm ±2.5ppm ±3ppm ±5ppm ±10ppm 0° to +60°C 0° to +70°C -10° to +70°C -20° to +70°C -30° to +60°C -30° to +75°C Voltage-control (VCTCXO) ±5ppm pull range version available - part number = VM Available within 2 weeks from order when required ±1ppm ±1.5ppm ±2ppm ±2.5ppm ±3ppm ±5ppm ±10ppm 0° to +60°C 0° to +70°C -10° to +70°C -20° to +70°C -30° to +60°C -30° to +75°C Voltage-control (VCTCXO) ±5ppm pull range version available - part number = VM Available within 2 weeks from order when required ±1ppm ±1.5ppm ±2ppm ±2.5ppm ±3ppm ±5ppm ±10ppm 0° to +60°C 0° to +70°C -10° to +70°C -20° to +70°C -30° to +60°C -30° to +75°C Voltage-control (VCTCXO) ±5ppm pull range version available - part number = VM Available within 2 weeks from order when required ±1ppm ±1.5ppm ±2ppm ±2.5ppm ±3ppm ±5ppm ±10ppm 0° to +60°C 0° to +70°C -10° to +70°C -20° to +70°C -30° to +60°C -30° to +75°C Voltage-control (VCTCXO) ±5ppm pull range version available - part number = VM Available on short lead times ±1ppm ±1.5ppm ±2ppm ±2.5ppm ±3ppm ±5ppm ±10ppm 0° to +60°C 0° to +70°C -10° to +70°C -20° to +70°C -30° to +60°C -30° to +75°C Voltage-control (VCTCXO) ±5ppm pull range version available - part number = VM Available on short lead times ±1ppm ±1.5ppm ±2ppm ±2.5ppm ±3ppm ±5ppm ±10ppm 0° to +60°C 0° to +70°C -10° to +70°C -20° to +70°C -30° to +60°C -30° to +75°C Voltage-control (VCTCXO) ±5ppm pull range version available - part number = VM Available on short lead times 15.24 M39 4.7 Ø0.5 18.3 15.24 0.5 7.62 5.0 1 7 14 8 11.7 4.7 3.15 4.0 11.7 1 7 14 8 7.5 21.3 M14 5.1 6.8 0.45 7.62 7.62 15.24 12.8 3.3V or 5V 1MHz to 60MHz 8MHz to 40MHz 3.3V or 5V HCMOS/TTL CLIPPED SINE 20.4 0.45 1MHz to 60MHz 8MHz to 40MHz 14 pin DIL Gull-wing Hermetically sealed no external trimmer 0.45 0.8 15.24 5.1 6.8 SMD Package Gull-wing version of M39 3.3V or 5V HCMOS/TTL CLIPPED SINE 20.4 7.6 M15 1MHz to 60MHz 8MHz to 40MHz 14 pin DIL Hermetically sealed no external trimmer 0.8 12.8 1MHz to 60MHz 8MHz to 40MHz Package compatible with 14 pin DIL 3.3V or 5V HCMOS/TTL CLIPPED SINE 20.4 15.24 M24 HCMOS/TTL CLIPPED SINE HCMOS/TTL CLIPPED SINE M47 12.8 11 Output Package Supply V. 1MHz to 60MHz 8MHz to 40MHz 14 pin DIL identical to M14 but with external trimmer 0.8 7.62 3.3V or 5V Detailed specifications for all products are available from the Euroquartz website: www.euroquartz.co.uk email: [email protected] tel: +44 (0)1460 230000 fax: +44 (0)1460 230001 20.4 7.6 12.8 7.62 1MHz to 60MHz 8MHz to 40MHz 3.3V or 5V HCMOS/TTL CLIPPED SINE 7.0 5.08 HCMOS/TTL CLIPPED SINE 14 pin DIL identical to M24 but with external trimmer 0.45 0.8 15.24 M42 Frequency Range 4 1 3 2 11.4 9.6 1MHz to 60MHz 8MHz to 40MHz 4 pad SMD 2.5mm height 3.3V or 5V 2.5 M44 HCMOS/TTL CLIPPED SINE 7.0 5.08 4 1 3 2 11.4 9.6 4.7 M62 7.62 2.54 6 5 4 3 1 11.4 2 1MHz to 60MHz 8MHz to 40MHz 4 pad SMD 4.7mm height 3.3V or 5V HCMOS/TTL CLIPPED SINE 1MHz to 60MHz 8MHz to 40MHz HCMOS/TTL CLIPPED SINE 1MHz to 60MHz 8MHz to 40MHz HCMOS/TTL CLIPPED SINE 1MHz to 60MHz 8MHz to 40MHz 6 pad SMD 2.5mm height 3.3V or 5V 0.5 2.5 Operating Temperature Temperature Stability Range Notes Availability ±1ppm ±1.5ppm ±2ppm ±2.5ppm ±3ppm ±5ppm ±10ppm 0° to +60°C 0° to +70°C -10° to +70°C -20° to +70°C -30° to +60°C -30° to +75°C Voltage-control (VCTCXO) ±5ppm pull range version available - part number = VM Available on short lead times ±1ppm ±1.5ppm ±2ppm ±2.5ppm ±3ppm ±5ppm ±10ppm 0° to +60°C 0° to +70°C -10° to +70°C -20° to +70°C -30° to +60°C -30° to +75°C Voltage-control (VCTCXO) ±5ppm pull range version available - part number = VM Available on short lead times ±1ppm ±1.5ppm ±2ppm ±2.5ppm ±3ppm ±5ppm ±10ppm 0° to +60°C 0° to +70°C -10° to +70°C -20° to +70°C -30° to +60°C -30° to +75°C Voltage-control (VCTCXO) ±5ppm pull range version available - part number = VM Available on short lead times ±1ppm ±1.5ppm ±2ppm ±2.5ppm ±3ppm ±5ppm ±10ppm 0° to +60°C 0° to +70°C -10° to +70°C -20° to +70°C -30° to +60°C -30° to +75°C Voltage-control (VCTCXO) ±5ppm pull range version available - part number = VM Available on short lead times ±1ppm ±1.5ppm ±2ppm ±2.5ppm ±3ppm ±5ppm ±10ppm 0° to +60°C 0° to +70°C -10° to +70°C -20° to +70°C -30° to +60°C -30° to +75°C Voltage-control (VCTCXO) ±5ppm pull range version available - part number = VM Available on short lead times ±1ppm ±1.5ppm ±2ppm ±2.5ppm ±3ppm ±5ppm ±10ppm (VCTCXO) ±5ppm 0° to +60°C pull range version 0° to +70°C - part -10° to +70°C available -20° to +70°C number = VM -30° to +60°C Available on short -30° to +75°C lead times 9.6 M64 7.62 2.54 6 5 4 3 1 11.4 2 4.7 6 pad SMD 4.7mm height 3.3V or 5V 0.5 5.0 5.08 1 6 2 5 7.0 3 4 2.6 1.6 6 pad SMD 7mm x 5mm 3.3V or 5V Voltage-control EUROQUARTZ LIMITED Blacknell Lane, CREWKERNE Somerset UK. TA18 7HE EURO QUARTZ 9.6 M57 FREQUENCY CONTROL PRODUCTS M25 Output Package Supply V. FREQUENCY CONTROL PRODUCTS Part Outline EURO QUARTZ TEMPERATURE-COMPENSATED CRYSTAL OSCILLATORS w w w. e u r o q u a r t z . c o . u k TC XO 12 EURO EUROQUARTZ QUARTZ FREQUENCY CONTROL PRODUCTS FREQUENCYCONTROL CONTROLPRODUCTS PRODUCTS OCXO OVEN-CONTROLLED CRYSTAL OSCILLATORS OVEN-CONTROLLED CRYSTAL OSCILLATORS OCXO Operation Lower turning point w w w. e u r o q u a r t z . c o . u k Oven-controlled Crystal Oscillators (OCXO) provide stable output frequencies from ±0.005ppm over a wide operating temperature range. Whereas Temperature-compensated Crystal Oscillators (TCXO) utilize a resistor/capacitor compensation network to counter frequency change due to temperature fluctuation, the crystal within an OCXO is ovenized, in that it is maintained at a constant temperature. This technique ensures that the crystal is unaffected by ambient temperature changes and therefore provides a very stable output frequency. Upper turning point Zero slope Temperature OCXO Block Diagram Oven Reference OCXO Construction The OCXO oven consists of a proportional heater (a power transistor) and an automatic gain control (AGC) circuit. A Heater thermistor senses temperature changes and signals the AGC, this bridge AGC Heater varies the power to the heater. Thermal gradient and heat loss is minimized by careful attention to packaging design, paying Oscillator proper attention to insulation. In operation, the oven -t° sensor temperature is set near to the upper turning point (UTP) of the crystals frequency/temperature curve. At the UTP the slope is practically zero and ideally, no frequency change occurs for wide APPLICATIONS temperature variations, as the crystal sees a constant temperature. Among the many applications in which Euroquartz OCXOs may be employed are: Choice of crystal Networking The stability, warm-up time and phase noise performance of an !! ADSL GSM Base Stations OCXO can be further improved by using SC-Cut crystals, SC-cut ! Instrumentation crystals have a particular double-rotated cut angle that gives maximum planar stress and thermal transient compensation. ! SONET Clocks EUROQUARTZ OCXO PRODUCT FEATURES ! ! ! ! ! ! Resistance-welded, fully hermetically sealed package No separate power supply required for oven operation Wide frequency range: 1.0MHz to 156.0MHz Wide operating temperature range: -40° to +85°C Custom specification available, from 0.005ppm Short warm-up time Output Package Supply V. Part Outline OC14 5.1 6.8 0.45 Standard 14 pin DIL 3.3V or 5V 0.8 12.8 EURO QUARTZ CONTROL PRODUCTS PRODUCTS FREQUENCY CONTROL FREQUENCY CONTROL PRODUCTS OC24 SUPPLY VOLTAGE Euroquartz OCXOs can be manufactured with supply voltages of 3.3Volts or 5.0Volts. VOLTAGE CONTROL Voltage control on pin 1 tol provide <±30ppm output change Frequency Range Standard 14 pin DIL Gull-wing SMD 3.3V or 5V 0.45 0.8 15.24 Notes Availability 1MHz to 156MHz 0° to +50°C 0° to +50°C -10° to +60°C -30° to +75°C -40° to +85°C Voltage-control (VCOCXO) ±20ppm pull range version available - part number = VOC Available on short lead times 1MHz to 156MHz 0.05ppm 0.1ppm 0.2ppm 0.3ppm 0.5ppm 0° to +50°C 0° to +50°C -10° to +60°C -30° to +75°C -40° to +85°C Voltage-control (VCOCXO) ±20ppm pull range version available - part number = VOC Available on short lead times HCMOS/TTL 20.4 Operating Temperature Temperature Stability Range 0.05ppm 0.1ppm 0.2ppm 0.3ppm 0.5ppm 7.62 7.6 12.8 OPTIONS HCMOS/TTL 20.4 15.24 13 AT-Cut Crystal Turning Points 7.62 Detailed specifications for all products are available from the Euroquartz website: www.euroquartz.co.uk email: [email protected] tel: +44 (0)1460 230000 fax: +44 (0)1460 230001 Package Styles and dimensions 7.8 4.7 3.1 L H H 13.6 15.0 ø0.43 Ø0.35 3.75 UM-1 H = 8.0 UM-5 H = 6.0 12.5 4.88 P S-1 S-2 L-1 L-2 L-3 1.5 7.0 4.0 KW K L 11.0 13.4 15.0 18.5 23.0 W 8.5 8.5 12.0 12.0 12.0 H P K 11.5 7.4 11.5 9.8 15.0 9.0 15.0 13.4 15.0 17.8 2.0 2.0 2.5 2.5 2.5 MCF 10.7MHz Series Channel Model No. of Pass Band Stop Band Width Ripple Insertion Guaranteed Terminating Package Spacing Number Poles Width Loss Attenuation Impedance (kHz) dB kHz dB kHz dB kHz dB max. dB max. dB fo kHz ~ kHz (W//pF) 12.5 20 25 50 10M07A 2 3 3.75 20 18 - - 0.5 1.5 35 +300 to +1000 1.8k//5.0 HC49T 50 -200 to -1000 10M07B 4 3 3.75 40 14 - - 1.0 2.5 65 +300 to +1000 1.8k//4.5 HC49T 80 -200 to -1000 x 2 (pr.) 10M07C 6 3 3.75 45 8.75 65 12.5 2.0 3.5 65 12.5 to 300 1.8k//3.5 L-1 10M07D 8 3 3.75 65 8.75 90 12.5 2.0 4.0 90 12.5 to 300 1.8k//3.5 L-2 10M09A 2 3 6.0 18 23 - - 0.5 2.0 35 +300 to +1000 2.5k//2.5 HC49T 40 -200 to -1000 10M09B 4 3 6.0 40 20 - - 1.0 2.5 65 +300 to +1000 2.5k//1.5 HC49T 80 -200 to -1000 x 2 (pr.) 10M09C 6 3 6.0 45 14 60 20 2.0 3.0 65 20 to 300 2.8k//1.0 L-1 10M09D 8 3 6.0 65 14 90 20 2.0 4.0 90 20 to 300 2.8k//1.0 L-2 10M15A 2 3 7.5 18 25 - - 0.5 2.0 35 +300 to +1000 3.0k//2.0 HC49T 40 -200 to -1000 10M15B 4 3 7.5 40 25 - - 1.0 2.5 55 +300 to +1000 3.0k//2.0 HC49T 80 -200 to -1000 x 2 (pr.) 10M15C 6 3 7.5 45 17.5 65 25 2.0 3.0 65 25 to 300 3.0k//1.5 L-1 10M15D 8 3 7.5 70 17.5 90 25 2.0 4.0 90 25 to 300 3.0k//1.5 L-2 10M15E 10 3 7.5 75 15 90 20 2.0 4.5 90 20 to 300 3.0k//1.5 L-3 10M30A 2 3 15 15 50 - - 0.5 1.5 30 +300 to +1000 5.0k//0 40 -300 to -1000 10M30B 4 3 15 30 40 - - 1.0 2.5 30 40 to 300 5.5k//-1.0 HC49T 10M30C 6 3 15 60 45 - - 2.0 3.0 60 45 to 300 5.5k//-1.0 L-1 10M30D 8 3 15 60 30 80 40 2.0 3.5 90 50 to 300 5.5k//-1.0 L-2 HC49T EUROQUARTZ LIMITED Blacknell Lane, CREWKERNE Somerset UK. TA18 7HE FREQUENCY CONTROL PRODUCTS 11.3 MCF UM-1, UM-5 EURO QUARTZ HC-49/T FREQUENCY CONTROL PRODUCTS MONOLITHIC CRYSTAL FILTERS w w w. e u r o q u a r t z . c o . u k EURO QUARTZ F I LT E R S 14 FREQUENCY CONTROL PRODUCTS FREQUENCYCONTROL CONTROLPRODUCTS PRODUCTS EURO EUROQUARTZ QUARTZ w w w. e u r o q u a r t z . c o . u k CONTROL PRODUCTS PRODUCTS FREQUENCY CONTROL FREQUENCY CONTROL PRODUCTS 15 EURO QUARTZ MCF 21.4MHz Series 4 6 8 21M30B 21M30C 21M30D 3 3 3 3 3 3 3 3 15 15 15 7.5 7.5 7.5 7.5 15 Pass Band Width dB kHz 3 7.5 3 7.5 3 7.5 45 70 40 40 45 65 75 14 dB 18 18 40 35 35 50 25 17.5 17.5 17.5 45 65 90 - 65 90 90 - kHz dB 25 25 25 - 50 50 - 25 25 20 - 2.0 2.0 1.0 1.0 2.0 2.0 2.0 0.5 Ripple 2.5 3.5 2.0 2.5 2.5 3.0 4.0 1.5 Insertion Loss kHz dB max. dB max. 0.5 2.0 0.5 2.0 1.0 2.0 Stop Band Width Detailed specifications for all products are available from the Euroquartz website: www.euroquartz.co.uk UM-1 UM-5 UM-1 x 2 (pr.) UM-5x2 S-1 S-1 S-2 UM-1 Package UM-1 x 2 UM -1 UM-1 x 2 UM-1 UM-1 x 2 UM-1 UM-1 x 2 910//2.5 1200//1.5 1200//0.7 1200//1.5 1200//0.7 1100//-0.93 1500//0.0 email: [email protected] tel: +44 (0)1460 230000 fax: +44 (0)1460 230001 UM-1 UM-1 x 2 UM-1 UM-5 UM-1 x 2 UM-5 x 2 UM-1 UM-1 x 2 Package 1.8k//0.5 UM-1 x 2 (pr.) 2.2k//0.5 S-1 2.2k//0.5 S-1 1.5k//6 1.5k//2.0 1.5k//2.0 1.5k//2.0 1.5k//1.0 Terminating Impedance (W//pF) 1.5k//3.0 1.5k//3.0 1.5k//2.0 1.2k//3.0 UM-1 x 2 (pr.) 1.2k//2.5 S-1 1.2k//2.5 S-1 UM-5 UM-1 x 2 (pr.) 850//5 UM-5x2 850//5 S-1 850//5 S-1 850//5 S-2 1.2k//3.0 UM-1 1500//6 850//6 Terminating Package Impedance (W//pF) 850//6 UM-1 Terminating Impedance (W//pF) 350//10.5 350//10.5 650//5.0 650//5.0 650//3.0 650//3.0 910//2.5 1000//1.5 Guaranteed Attenuation dB fo kHz ~ kHz 75 -910 75 -910 65 +350 to +1000 80 -300 to -1000 90 910 65 25 to 300 90 25 to 300 90 18 to 300 35 +300 to +1000 45 -300 to -1000 65 +350 to +1000 80 -250 to -1000 65 50 to 200 90 50 to 1000 No. of Pass Band Width Stop Band Width Ripple Insertion Guaranteed Poles Loss Attenuation dB kHz dB kHz dB max. dB max. dB fo kHz ~ kHz 45M7.5A 2 3 3.75 10 12.5 1.0 2.0 65 -910 45M7.5B 4 3 3.75 30 12.5 1.0 4.0 90 910 45M15A 2 3 7.5 15 25 1.0 2.0 75 -910 45M15AU5 2 3 7.5 15 25 1.0 2.0 75 -910 45M15B 4 3 7.5 30 25 1.0 3.0 90 910 45M15BU5 4 3 7.5 30 25 1.0 3.0 90 910 45M20A 2 3 10 15 30 0.5 2.0 65 -910 45M20B 4 3 10 40 40 1.0 2.0 80 -500 to -1000 80 +500 to +1000 45M20B1 4 3 10 35 40 1.0 3.0 90 910 45M30A 2 3 15 15 50 1.0 2.0 70 -910 45M30B 4 3 15 35 50 1.0 3.0 90 910 45M30A 2 3 15 15 30 1.0 2.0 70 -910 45M30B 4 3 15 35 50 1.0 3.0 90 910 45M32A 2 3 16 15 60 0.5 2.5 65 -910 45M32B 4 3 16 35 50 1.0 4.0 80 910 Model Number MCF 45MHz Series 50 4 6 8 10 2 21M15B5 21M15C 21M15D 21M15E 21M30A Channel Model No. of Spacing Number Poles (kHz) 25 21M15A 2 21M15A5 2 21M15B 4 MCF 21.4MHz Series Channel Model No. of Pass Band Stop Band Width Ripple Insertion Guaranteed Spacing Number Poles Width Loss Attenuation (kHz) dB kHz dB kHz dB kHz dB max. dB max. dB fo kHz ~ kHz 12.5 21M07A 2 3 3.75 20 18 0.5 2.0 35 +350 to +1000 50 -200 to -1000 21M07A5 2 3 3.75 18 12.5 0.5 2.0 75 -910 21M07B 4 3 3.75 40 14 1.0 2.5 65 +350 to +1000 80 -200 to -1000 21M07B5 4 3 3.75 35 12.5 1.0 2.5 90 -910 21M07C 6 3 3.75 45 8.75 65 12.5 2.0 3.0 65 12.5 to 300 21M07D 8 3 3.75 65 9 90 12.5 2.0 4.0 90 12.5 to 300 21M07E 10 3 3.75 75 8.75 90 10.5 2.0 4.5 90 12.5 to 300 20 21M09A 2 3 6 18 23 0.5 2.0 35 +350 to +1000 50 -200 to -1000 21M09B 4 3 6 40 20 1.0 2.5 65 +350 to +1000 70 -200 to -1000 21M09C 6 3 6 45 14 65 20 2.0 3.0 65 20 to 300 21M09D 8 3 6 65 14 90 20 2.0 4.0 90 20 to 300 MONOLITHIC CRYSTAL FILTERS F I LT E R S Ripple FILTER TERMS AND DEFINITIONS Our filter production process is geared to the manufacture of single units or small Nominal Frequency The Nominal Frequency of a filter is the batches. The majority of products are centre frequency (F ) or carrier frequency (F ) assembled by hand to ensure both maximum flexibility and to avoid in SSB filters. expensive and time-consuming tooling setup. Pass Band Width Low Cost Stated in kHz, the Pass Band Width refers to the frequency bands where attenuation is Euroquartz Filters' CAD programmes equal to or lower than the specified enable compact passive circuits to be attenuation (in dB) designed using standard components wherever practicable. Many non-standard components can be manufactured inStop Band Width house to exacting specifications. In In kHz, the Stop Bandwidth is where conjunction with the use of skilled manual attenuations are equal to or larger than the assembly rather than expensive automatic specified figures (dB) procedures, this ensures that small quantities of custom-built circuits can be produced to the highest quality standards Insertion Loss at the lowest possible cost. If you have a Insertion Loss is the loss (dB) defined by the specific filter design that you would like us logarithmic ratio of power transmitted to to consider do not hesitate to contact us load before and after insertion of the filter. by phone, fax or email. 0 c Ripple is the difference (dB) between maximum and minimum attenuation in the passband. Guaranteed Attenuation Attenuation guaranteed (dB) at the specified frequency range. Spurious Spurious refers to the attenuation (dB) caused by extraordinary response in the stopband. Group Delay Distortion The difference between maximum and minimum group delay within the passband is referred to as Group Delay Distortion. Terminating Impedance Refers to either of the impedances presented to the filter by the source or by the load and describes the resistive portion (R ) and the parallel capacitive portion (C ) including stray capacitance. t t EXAMPLES OF FILTERS DESIGNED AND MANUFACTURED TO CUSTOMER’S REQUIREMENTS 35.8 CRYSTAL FILTER, 19.9750MHz This filter was designed and manufactured for a data transmission application where excellent Group Delay parameters were essential. 6.0 22.86 15.24 7.62 26.5 27.5 CRYSTAL FILTER, 19.850MHz A miniature discrete crystal filter produced for an application where small physical size was essential 14.8 8.0 20.0 15.0 5.25 10.5 18.0 27.0 8-POLE WIDE BAND CRYSTAL FILTER 26.5 Designed for satellite data monitoring. 49.2 14.3 35.8 CRYSTAL FILTER, 174.000MHz This high frequency crystal filter has been produced in a low-profile package. 6.0 15.24 13.0 22.86 7.62 26.5 Centre Frequency: Insertion Loss: Ripple: Diff. Delay: Ult. Attenuation: Terminations: Spurious: 19.9750MHz 2dB 0.5dB max. 5ms max. 55dB 50W 40dB min. Centre Frequency: 19.850MHz Insertion Loss: 2dB Ripple: 0.5dB max. Diff. Delay: 5ms max. Ult. Attenuation: 45dB Grp. Delay 7.7kHz: 13ms p-p max. Spurious: 40dB min. Centre Frequency: Insertion Loss: Ripple: Bandwidth 6dB: Bandwidth 60dB: Termination: Ult. Attenuation: 21.40MHz 6dB max. 2dB max. ±60kHz ±160kHz 1.6kW//2.2pF 70dB Centre Frequency: Insertion Loss: Ripple: Bandwidth 3dB: 173.9375MHz: 173.875MHz: 174.0MHz 6dB max. 1dB max. ±40kHz nom. 30dB min. 45dB min. EUROQUARTZ LIMITED Blacknell Lane, CREWKERNE Somerset UK. TA18 7HE FREQUENCY CONTROL PRODUCTS Small Batch Production CUSTOM FILTERS FOR BESPOKE APPLICATIONS w w w. e u r o q u a r t z . c o . u k Euroquartz Filters is a separate company within the Euroquartz Group specializing in the design and production of custom electronic filters. EURO QUARTZ About Euroquartz Filters FREQUENCY CONTROL PRODUCTS EUROQUARTZ FILTERS - SPECIALISTS IN FILTER DESIGN EURO QUARTZ C U S T O M F I LT E R S 16 EURO EUROQUARTZ QUARTZ FREQUENCY CONTROL PRODUCTS FREQUENCYCONTROL CONTROLPRODUCTS PRODUCTS R E S O N ATO R S CERAMIC - DIELECTRIC - COAXIAL Part Outline ZTA 10.0 W H w w w. e u r o q u a r t z . c o . u k 0.25 0.6 5.0 5.0 ZTT W 10.0 H 0.25 0.6 5.0 = 2.5 ZTB W L H 8.0 S ZTBF W L H 1.0 0.7 S COAXIAL L A A B EURO QUARTZ CONTROL PRODUCTS PRODUCTS FREQUENCY CONTROL FREQUENCY CONTROL PRODUCTS 17 2mm Dimensions L,W,H (mm) Frequency Range Resonance Resistance 10 x 3 x 7.5 10 x 3 x 7.5 10 x 3 x 7.5 10 x 5 x 10 10 x 5 x 10 10 x 5 x 10 2.0 to 2.99MHz 3.0 to 3.49MHz 3.5 to 4.99MHz 5.0 to 6.99MHz 7.0 to 13MHz 13 to 25MHz 80W 50W 30W 30W 25W 25W 10 x 5 x 8 10 x 5 x 8 10 x 5 x 8 10 x 5 x 10 10 x 5 x 10 10 x 5 x 10 2.0 to 2.99MHz 3.0 to 3.49MHz 3.5 to 4.99MHz 5.0 to 6.99MHz 7.0 to 13.0MHz 13.01 to 25MHz 80W 50W 30W 30W 25W 25W ±0.5% at 25°C ±0.3% over -20° to +80°C 13.5 x 3.8 x 14.7 11.0 x 3.8 x 12.2 7.9 x 3.6 x 9.3 7.9 x 3.6 x 9.3 7.0 x 3.5 x 9.0 7.0 x 3.5 x 9.0 5.0 x 2.2 x 6.0 5.0 x 2.2 x 6.0 190 to 249kHz 250 to 374kHz 375 to 429kHz 430 to 449kHz 450 to 509kHz 510 to 699kHz 700 to 999kHz 1.0 to 1.25MHz 20W 20W 20W 20W 20W 35W 70W 100W ±0.5% at 25°C ±0.3% over -20° to +80°C 9.3 x 7.9 x 3.6 9.0 x 7.0 x 3.5 9.0 x 7.0 x 3.5 6.0 x 5.0 x 2.2 6.0 x 5.0 x 2.2 375 to 440kHz 440 to 509kHz 510 to 699kHz 700 to 999kHz 1.0 to 1.25MHz 20W 20W 35W 70W 100W AxBxL FREQUENCY 3 x 1.0 x 8.5 4 x 1.55 x 17.7 4 x 1.55 x 16.5 4 x 1.55 x 9.15 5 x 1.55 x 14.9 5 x 1.55 x 8.1 6 x 2.4 x 17.7 6 x 2.4 x 16.5 6 x 2.4 x 9.15 10 x 3.1 x 31.0 1000MHz 480MHz 502MHz 930MHz 570MHz 1050MHz 480MHz 502MHz 930MHz 380MHz DIELECTRIC Dr dr Lr Dr Dia.(Dr) 2mm to 18mm 1GHz to 25.5GHz Thickness (Lr) 0.9mm to 8.10mm Lr Detailed specifications for all products are available from the Euroquartz website: www.euroquartz.co.uk Q >230 >250 >250 >250 >280 >280 >300 >300 >300 >300 Stability Notes Availability ±0.5% at 25°C ±0.3% over -20° to +80°C Ceramic Resonator Low cost Available loose or taped Stocked in standard values ±0.5% at 25°C ±0.3% over -20° to +80°C Ceramic Resonator with built-in capacitors Low cost Available loose or taped Short lead times Ceramic Resonator for low frequencies Low cost Available loose or taped Short lead times Surface-mount Ceramic Resonator Low cost Tape and Reel packaging Short lead times ¼ wavelength coaxial resonator 380Mhz to 3GHz ±0.5% Dielectric Constant Small size, good temperature 20.5 to 88.0 performance Very short lead times Disk and cylindrical ceramic resonators Dielectric Constant High Q 37 to 80 Superior spurious response Very short lead times email: [email protected] tel: +44 (0)1460 230000 fax: +44 (0)1460 230001 One of the strengths of the Euroquartz operation is provided by Euroquartz Manufacturing, sited in a purpose-built manufacturing unit of some 1,208 sq. metres. (13,000 sq. ft.) The Euroquartz factory incorporates research and development, engineering, production control, manufacturing processes and quality assurance departments. In conjunction with the UK Defence Research Establishment, Euroquartz have designed and developed a range of oscillators able to withstand ionizing radiation experienced in upper atmosphere and space applications. Full details of the product range are available on the Euroquartz website. CRYSTAL PRODUCTION QUALIFICATION APPROVAL OPTICAL Quartz crystal production begins with the selection of quartz crystal blanks of the appropriate thickness and cut orientation from our comprehensive crystal blank library. Subsequent processes include lapping, polishing and contouring operations designed to produce quartz crystal blanks with precisely specified size, shape, orientation and surface finish to ensure the desired electrical properties of the finished products. ELECTRICAL The optical stages of production are followed by electrical processes including etching and cleaning, vacuum deposition of gold or silver electrodes, mounting and bonding, adjustment to final frequency, encapsulation, marking and final quality assurance inspection. OSCILLATOR PRODUCTION Oscillator units are fabricated using both thick film hybrid substrates and printed circuit board techniques. Depending upon the application the oscillator crystal may be incorporated as an independently sealed unit or as an un-encapsulated crystal blank. In the latter case the blank is mounted directly onto the oscillator substrate and the completed assembly is adjusted to final frequency before hermetic sealing. Products produced by Euroquartz Manufacturing oscillator department include standard HCMOS/TTL oscillators, VCXOs, TCXOs, and OCXOs, the latter components requiring a much greater input by engineering and quality assurance departments. FILTER PRODUCTION Crystal filters consist of a number of discrete crystal or monolithic dual elements assembled on a printed circuit board with other passive components (inductors, transformers, capacitors etc.), the whole unit being hermetically sealed in a metal enclosure. The basic manufacturing steps for filter production are crystal units, printed circuit board assembly, filter alignment, encapsulation and final test. Euroquartz also manufacture many non-crystal components used in custom filter production including coil winding. Vibration: Shock: Thermal Shock: Storage Temperature: Moisture Resistance: Seal: Terminal Strength: Solderability: 10Hz to 60Hz 0.75mm displacement, 60~2000Hz 98.1m/s2 acceleration, 30 mins in each of three mutually perpendicular planes. 981m/s2 for 6ms, three shocks in each direction along three mutually perpendicular planes. MIL-STD-202 method 107 -55°C for 24hrs., then 150°C for 24hrs. 85%rh at 85°C for 250hrs. Fine leak not to exceed 1x108mBar litres of helium leakage followed by gross leak test. MIL-STD-202 method 211 MIL-STD-202 method 208 Screening in accordance with MIL-O-55310 Class B. Stabilization Bake: Temperature Cycling: Constant Acceleration: Seal: Dynamic Burn-in: Electrical Test: Vacuum storage at 150°C for 24hrs. -55°C to 125°C 10 cycles 49000 m/s2 for 1 minute in the Y1 plane. Fine leak not to exceed 1x10-8 mBar litres of helium leakage followed by gross leak test. 125°C for 168hrs. Frequency, output waveform, output voltage/power, input current/power. ENGINEERING AND SUPPORT SERVICES Of benefit to Euroquartz customers is the high level of expertise of Euroquartz engineering department. Due to the manufacturing necessity of maintaining effective engineering support, Euroquartz have the ability to offer design expertise to customers, ensuring that the most appropriate and economic frequencycontrol components are designed-in. Euroquartz therefore offer customers a high level of engineering support, testing and consultation services, in many cases free of charge. If you require assistance please do not hesitate to ask Euroquartz. EUROQUARTZ LIMITED Blacknell Lane, CREWKERNE Somerset UK. TA18 7HE EURO QUARTZ DEFENCE AND AEROSPACE COMPONENTS Euroquartz Manufacturing designs and manufactures crystal and oscillator products and offers screening in accordance with specification MIL-O-55310C Class B. The highly specified components produced are purpose-designed for rugged environments, using special crystal mounting procedures and all ceramic oscillator substrates. FREQUENCY CONTROL PRODUCTS RADIATION TOLERANT OSCILLATORS FREQUENCY CONTROL PRODUCTS THE EUROQUARTZ MANUFACTURING UNIT EURO QUARTZ EUROQUARTZ FACTORY AND CUSTOMER SUPPORT ENGINEERING w w w. e u r o q u a r t z . c o . u k M A N U FAC T U R I N G 18