California Eastern Laboratories UPG183GR GaAs MMIC DBS

GaAs MMIC DBS 4X2 IF SWITCH UPG183GR
OUTLINE DIMENSIONS (Units in mm)
D
FEATURES
• FOUR INDEPENDENT IF CHANNELS
16 pin HTSSOP
• INTEGRAL SWITCHING TO CHANNEL INPUT TO
EITHER CHANNEL OUTPUT
0.20±0.10
UE
6.4±0.3
• INSERTION LOSS PER CHANNEL:
7 dB TYP (ZO = 50 Ω)
8
9
0.65±0.1
• FREQUENCY RANGE:
950 MHz to 2150 MHz
5.5±0.3
0.20±0.10
N
• CHANNEL TO CHANNEL ISOLATION:
26.5 dB TYP
16
• SMALL 16 PIN HTSSOP PACKAGE
1
IN
5.2±0.2
DESCRIPTION
SC
O
NT
NEC's UPG183GR is intended for use in Direct Broadcast
Satellite (DBS) applications within the Low Noise Block (LNB)
down converter, for systems where at least two LNB outputs are
required. It offers four intermediate frequency amplifier channels
that can independently select 1 of 4 IF inputs. It is housed in a
very small 16 pin plastic HTSSOP package, available on tapeand-reel, easy to install and contributes to miniaturizing the
systems.
0.9±0.2
0.4 0.5
1.8
2.7
0.1
2.5
1.5
ELECTRICAL CHARACTERISTICS
(TA = +25°C, unless otherwise specified, VCONT1 to VCONT8 = 0/+5 V, PIN = 0 dBm, ZO = 50 Ω, Each Port)
PART NUMBER
PACKAGE OUTLINE
SYMBOLS
PARAMETERS AND CONDITIONS
UPG183GR
16 pin HTSSOP
UNITS
MIN
TYP
MAX
LINS 1
Insertion Loss 1, f = 0.95 GHz to 1.5 GHz
dB
—
7.0
9.0
LINS 2
Insertion Loss 2, f = 1.5 GHz to 2.15 GHz
dB
—
8.0
10.0
∆LINS
Insertion Loss Flatness, | LINS (0.95 GHz)—LINS (2.15 GHz)|
dB
—
1.5
3.0
ISOL 1
Channel Isolation 1, f = 0.95 GHz to 1.5 GHz
dB
24
26.5
—
ISOL 2
Channel Isolation 2, f = 1.5 GHz to 2.15 GHz
dB
22
23.5
—
RL(OUT)
Output Return Loss, f = 0.95 GHz to 2.15 GHz
dB
10
14
—
mA
—
—
0.5
Control Current , VCONT = +5 V/0 V, RFoff
DI
ICONT
1
Notes:
1. Per one control pin.
California Eastern Laboratories
UPG183GR
ABSOLUTE MAXIMUM RATINGS1 (TA = +25°C)
VCONT1-8
PARAMETERS
Total Power
PIN
Input Power
TA
TSTG
RATINGS
V
-1.0 to +6.0
SYMBOLS
Control Voltage 1-8
PTOT
RECOMMENDED
OPERATING CONDITIONS (TA = +25°C)
UNITS
Dissipation2
PARAMETERS
UNITS MIN TYP MAX
W
2
VCONT(H)
Control Voltage (High)
V
+4.5
+5
+5.5
dBm
+ 10
VCONT(L)
Control Voltage (Low)
V
-0.5
0
+0.5
Operating Ambient Temp.
°C
-40 to +85
Storage Temperature
°C
-65 to +150
D
SYMBOLS
UE
Notes:
1. Operation in excess of any one of these parameters may
result in permanent damage.
2. Mounted on a 50x50x1.6 mm double copper
clad epoxy glass PWB, TA = +85°C.
EVALUATION CIRCUIT (VCONT1 to VCONT8 = 0/+5 V, PIN = 0d Bm, ZO = 50 Ω, DC Blocking Capacitor = 51 pF)
VCOUNT1, VCOUNT2, VCOUNT3, VCOUNT4,
51pF
51pF
1000 pF
IN
IN-A
50 Ω
IN-B
OUT1
51 pF
9
NT
16
1
ZO=50 Ω
IN-C
51pF
SC
O
IN-D
8
OUT2
51 pF ZO=50 Ω
50 Ω
1000 pF
51pF
VCOUNT5, VCOUNT6, VCOUNT7, VCOUNT8
CHANNEL SELECT TRUTH TABLE
ON CHANNEL
CONTROL PIN
OUT2
VCONT1
VCONT2
VCONT3
VCONT4
VCONT5
VCONT6
VCONT7
VCONT8
IN-A
IN-B
IN-C
IN-D
–
–
–
–
–
–
–
–
IN-A
IN-B
IN-C
IN-D
High
High
Low
Low
–
–
–
–
Low
Low
High
High
–
–
–
–
High
Low
High
Low
–
–
–
–
Low
High
Low
High
–
–
–
–
–
–
–
–
High
High
Low
Low
–
–
–
–
Low
Low
High
High
–
–
–
–
High
Low
High
Low
–
–
–
–
Low
High
Low
High
DI
OUT1
UPG183GR
TOP VIEW
PIN CONNECTION AND INTERNAL
BLOCK DIAGRAM
PIN NO.
16 15 14 13 12 11 10
9
CONNECTION
1
IN-C
9
OUT1
2
GND
10
VCONT4
3
IN-D
11
VCONT3
4
VCONT5
12
VCONT2
5
VCONT6
13
VCONT1
6
VCONT7
14
IN-A
7
VCONT8
15
GND
8
OUT2
16
IN-B
SW
D
CONNECTION
SW
UE
PIN NO.
1
ORDERING INFORMATION
PACKAGE
QUANTITY
UPG183GR-E1-A
16-pin Plastic HTSSOP
Qty. 3k pcs/Reel
3
4
5
6
7
8
IN
PART NUMBER
2
DI
SC
O
NT
Notes:
1. Carrier tape, 12 mm wide.
Life Support Applications
These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably
be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and
agree to fully indemnify CEL for all damages resulting from such improper use or sale.
EXCLUSIVE NORTH AMERICAN AGENT FOR
RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS
CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279
24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM
DATA SUBJECT TO CHANGE WITHOUT NOTICE
02/01/2001
D
4590 Patrick Henry Drive
Santa Clara, CA 95054-1817
Telephone: (408) 919-2500
Facsimile: (408) 988-0279
UE
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant
with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous
Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive
2003/11/EC Restriction on Penta and Octa BDE.
IN
CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates
that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are
exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals.
All devices with these suffixes meet the requirements of the RoHS directive.
This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that
go into its products as of the date of disclosure of this information.
Lead (Pb)
Mercury
< 1000 PPM
Concentration contained
in CEL devices
-A
Not Detected
< 1000 PPM
Not Detected
< 100 PPM
Not Detected
SC
O
Cadmium
Concentration Limit per RoHS
(values are not yet fixed)
NT
Restricted Substance
per RoHS
Hexavalent Chromium
< 1000 PPM
Not Detected
PBB
< 1000 PPM
Not Detected
PBDE
< 1000 PPM
Not Detected
-AZ
(*)
If you should have any additional questions regarding our devices and compliance to environmental
standards, please do not hesitate to contact your local representative.
DI
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance
content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information
provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better
integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate
information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL
suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for
release.
In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to
customer on an annual basis.
See CEL Terms and Conditions for additional clarification of warranties and liability.
5-226
;