NEC's NPN SILICON TRANSISTOR OUTLINE DIMENSIONS (Units in mm) FEATURES • • PACKAGE OUTLINE M13 NEW MINIATURE M13 PACKAGE: – Small transistor outline – 1.0 X 0.5 X 0.5 mm – Low profile / 0.50 mm package height – Flat lead style for better RF performance HIGH GAIN BANDWIDTH PRODUCT: fT = 7 GHz +0.1 0.5 –0.05 +0.1 0.15 –0.05 0.3 1 2 0.35 XX • NE681M13 +0.1 1.0 –0.05 0.7 3 3 +0.1 0.2 –0.05 0.35 LOW NOISE FIGURE: NF = 1.4 dB 2 1 +0.1 0.15 –0.05 0.1 0.1 0.2 0.2 DESCRIPTION NEC's NE681M13 transistor is ideal for low noise, high gain, and low cost amplifier applications. NEC's new low profile/ flat lead style "M13" package is ideal for today's portable wireless applications. The NE681 is also available in chip, Micro-x, and six different low cost plastic surface mount package styles. Bottom View +0.1 0.125 –0.05 0.5±0.05 PIN CONNECTIONS 1. Emitter 2. Base 3. Collector ELECTRICAL CHARACTERISTICS (TA = 25°C) PART NUMBER EIAJ1 REGISTERED NUMBER PACKAGE OUTLINE SYMBOLS PARAMETERS AND CONDITIONS NE681M13 2SC5615 M13 UNITS MIN GHz 4.5 fT Gain Bandwidth at VCE = 3 V, IC = 7 mA, f = 1 GHz NF Noise Figure at VCE = 3 V, IC = 7 mA, f = 1 GHz dB Insertion Power Gain at VCE = 3 V, IC = 7 mA, f = 1 GHz dB |S21E|2 TYP 7 1.4 10 MAX 2.7 12 hFE2 Forward Current Gain at VCE = 3 V, IC = 7 mA ICBO Collector Cutoff Current at VCB = 10 V, IE = 0 µA IEBO Emitter Cutoff Current at VEB = 1 V, IC = 0 µA 0.8 CRE3 Feedback Capacitance at VCB = 3 V, IE = 0, f = 1 MHz pF 0.9 80 145 0.8 Notes: 1. Electronic Industrial Association of Japan. 2. Pulsed measurement, pulse width ≤ 350 µs, duty cycle ≤ 2 %. 3. Capacitance is measured with emitter and case connected to the guard terminal at the bridge. California Eastern Laboratories NE681M13 ORDERING INFORMATION ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS PARAMETERS UNITS PART NUMBER RATINGS VCBO Collector to Base Voltage V 20 NE681M13-A VCEO Collector to Emitter Voltage V 10 NE681M13-T3-A VEBO Emitter to Base Voltage V 1.5 Collector Current mA 65 PT2 IC Total Power Dissipation mW 140 TJ Junction Temperature °C 150 TSTG Storage Temperature °C -65 to +150 QUANTITY Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. With device mounted on 1.08 cm2 X 1.2 mm glass epoxy board. TYPICAL PERFORMANCE CURVES (TA = 25°C) FORWARD CURRENT GAIN vs. COLLECTOR CURRENT COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 65 500 DC Forward Current Gain, hFE VCE = 8 V Collector Current, IC (mA) 55 45 35 25 15 300 200 100 70 50 30 20 5 10 0 2 4 6 8 10 Collector to Emitter Voltage, VCE (V) 1 2 3 5 7 10 20 30 50 Collector Current, IC (mA) Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. EXCLUSIVE NORTH AMERICAN AGENT FOR RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM 2/09/2000 DATA SUBJECT TO CHANGE WITHOUT NOTICE 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A Not Detected Lead (Pb) < 1000 PPM Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability. 3-189