NEC'S NPN SILICON EPITAXIAL TRANSISTOR FEATURES NE69039 OUTLINE DIMENSIONS (Units in mm) • OUTPUT POWER AT 1dB COMPRESSION POINT: 27.5 dBm TYP @F = 1.9 GHZ, VCE = 3.6 V, Class AB, Duty 1/8 PACKAGE OUTLINE 39 • 4 PIN MINI MOLD PACKAGE: NE69039 +0.2 2.8 -0.3 +0.2 1.5 -0.1 +0.10 0.4 -0.05 (LEADS 2, 3, 4) 2 2.9 ± 0.2 0.95 3 1.9 0.85 4 1 DESCRIPTION 1) Collector 2) Emitter 3) Base +0.10 0.6 -0.05 NEC's NE69039 is a low voltage, NPN Silicon Bipolar Transistor for pulsed power applications. The device is designed to operate from a 3.6 V supply, and deliver over 1/2 watt of power output at frequencies up to 2.0 GHZ with a 1:8 duty cycle. These characteristics make it an ideal device for TX output stage in a 1.9 GHZ digital cordless telephone (DECT or PHS). The part is supplied in a SOT-143 (SC-61) 4-pin Minimold package and is available on tape and reel. 4) Emitter +0.2 1.1 -0.1 0.8 0.16 +0.10 -0.06 5˚ 5˚ 0 to 0.1 The NE69039 transistors are manufactured to NEC's stringent quality assurance standards to ensure highest reliability and consistent superior performance. ELECTRICAL CHARACTERISTICS (TA = 25 °C) PART NUMBER PACKAGE CODE SYMBOLS PARAMETERS NE69039 39 UNITS ICBO Collector Cutoff Current, VCB = 5 V, IE = 0 µA IEBO Emitter Cutoff Current, VEB = 1 V, IC = 0 µA hFE DC Current Gain, VCE = 3.6 V, IC = 100 mA P-1 Output Power VCE = 3.6 V, f = 1.9 GHZ ICq = 1 mA (Class AB) Duty 1/8 GP Power Gain ηC Collector Efficiency TON Maximum Device On Time MIN TYP MAX 2.5 2.5 30 dBm 27.5 dB 5.0 6.0 % 50 72 MS 10.0 California Eastern Laboratories NE69039 ABSOLUTE MAXIMUM RATINGS1 (TA = 25 °C) SYMBOLS PARAMETERS UNITS RATINGS VCBO Collector to Base Voltage V 9.0 VCEO Collector to Emitter Voltage V 6.0 VEBO Emitter to Base Voltage V 2.0 OUTLINE 39 RECOMMENDED P.C.B. LAYOUT 2.4 3 2 IC Collector Current mA 300 PT Total Power Dissipation mW 200 (CW) Tj Junction Temperature °C 150 TSTG Storage Temperature °C -65 to +150 1.9 Note: 1. Operation in excess of any one of these parameters may result in permanent damage. 1.0 1 4 1.0 APPLICATION ORDERING INFORMATION (1) TX Amplifier for DECT +3 dBm PART NUMBER NE69039-T1-A Po = 27 dBm NE68839 NE68939 QTY 3K/REEL Note: 1. Lead material: Cu Lead plating: PbSn NE69039 (2) TX Amplifier for PHS -14 dBm P1 = 22 dBm Ω) DATA ZIN (Ω Ω), ZOUT (Ω j50 µPC2771T NE68939 NE69039 ηC 20 80 60 15 40 10 20 0 8 7 IC GP 6 5 5 4 5 10 15 20 30 20 10 0 25 ZIN ZOUT 0 Collector Currents, IC (mA) 25 Collector Efficency, ηC (%) Output Power, Pout (dBm) f = 1.9 GHZ, VCC = 3.6V IC = 1mA (Duty 1/8) j10 Power Gain, Gp (dB) 30 Pout j100 j25 OUTPUT POWER, COLLECTOR EFFICIENCY, COLLECTOR CURRENT AND POWER GAIN VS. INPUT POWER 0 -j10 -j100 -j25 -j50 ZOUT ZIN Input Power, Pin (dBm) TYPICAL DATA f = 1.9 GHz, VCC = 3.6 V, ICQ = 1 mA, DUTY = 1/8 P1dB 27.5 dBm % IMPEDANCE LOOKING INTO DEVICE VCC = 3.6 V, ICQ = 1 mA, CLASS AB FREQUENCY ZIN ZOUT (GHZ) (Ω Ω) (Ω Ω) ηC 72 IC 27 mA 1.9 7.42+j14.2 15.8-j2.64 GL 6.7 db 0.9 4.0+j8.8 4.4-j4.6 EXCLUSIVE NORTH AMERICAN AGENT FOR RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM DATA SUBJECT TO CHANGE WITHOUT NOTICE 07/06/2000 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A Not Detected Lead (Pb) < 1000 PPM Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.