PS8551L4-AX

A Business Partner of Renesas Electronics Corporation.
Preliminary
PS8551L4
Data Sheet
R08DS0039EJ0200
Rev.2.00
Sep 06, 2011
ANALOG OUTPUT TYPE
OPTICAL COUPLED ISOLATION AMPLIFIER
DESCRIPTION
The PS8551L4 is an optically coupled isolation amplifier that uses an IC with a high-accuracy sigma-delta A/D
converter and a GaAIAs light-emitting diode with high-speed response and high luminance efficiency on the input side,
and an IC with a high-accuracy D/A converter on the output side.
The PS8551L4 is designed specifically for high common mode transient immunity (CMTI) and high linearity (non-
linearity). The PS8551L4 is suitable for current sensing in motor drives.
FEATURES
PIN CONNECTION
(Top View)
• High common mode transient immunity (CMTI = 10 kV/μs MIN.)
–
• Package: 8-pin DIP lead bending type (Gull-wing) for long creepage distance for
surface mount (L4)
• Embossed tape product: PS8551L4-E3 : 1 000 pcs/reel
6
+
Gain: 8 V/V TYP.
7
1
–
• Gain tolerance (G = 7.76 to 8.24 (±3%))
8
+
• High isolation voltage (BV = 5 000 Vr.m.s.)
2
3
5
SHIELD
• Non-linearity (NL200 = 0.35% MAX.)
4
1. VDD1
2. VIN+
3. VIN–
4. GND1
5. GND2
6. VOUT–
7. VOUT+
8. VDD2
• Pb-Free product
• Safety standards
• UL approved: No. E72422
• CSA approved: No. CA 101391 (CA5A, CAN/CSA-C22.2 60065, 60950)
• SEMKO approved: No. 1111155
• DIN EN60747-5-2 (VDE0884 Part2) approved: No. 40019182 (Option)
APPLICATIONS
• AC Servo, inverter
• Measurement equipment
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
R08DS0039EJ0200 Rev.2.00
Sep 06, 2011
Page 1 of 17
A Business Partner of Renesas Electronics Corporation.
PS8551L4
Chapter Title
PACKAGE DIMENSIONS (UNIT: mm)
Lead Bending Type (Gull-wing) For Long Creepage Distance For Surface Mount (L4)
+0.5
9.25–0.25
10.05±0.4
+0.5
3.5±0.2
0.5±0.15
2.54
3.7±0.35
6.5–0.1
0.2±0.15
1.01
+0.4
–0.2
0.62±0.25
PHOTOCOUPLER CONSTRUCTION
Parameter
Unit (MIN.)
Air Distance
8 mm
Outer Creepage Distance
8 mm
Isolation Distan ce
R08DS0039EJ0200 Rev.2.00
Sep 06, 2011
0.4 mm
Page 2 of 17
A Business Partner of Renesas Electronics Corporation.
PS8551L4
Chapter Title
<R> MARKING EXAMPLE
No. 1 pin
Mark
R
8551
NT131
Company Initial
Type Number
Assembly Lot
N T 1 31
Week Assembled
Year Assembled
(Last 1 Digit)
In-house Code
(T: Pb-Free)
Rank Code
ORDERING INFORMATION
Part Number
Order Number
Solder Plating
Specification
Packing Style
Safety Standard
Approval
PS8551L4
PS8551L4-AX
Pb-Free
Magazine case 50 pcs
Standard products
PS8551L4-E3
PS8551L4-E3-AX
(Ni/Pd/Au)
Embossed Tape 1 000 pcs/reel
(UL, CSA, SEMKO
PS8551L4-V
PS8551L4-V-AX
Magazine case 50 pcs
DIN EN60747-5-2
PS8551L4-V-E3
PS8551L4-V-E3-AX
Embossed Tape 1 000 pcs/reel
(VDE0884 Part2)
Application Part
1
Number*
PS8551L4
approved)
Approved (Option)
*1 For the application of the Safety Standard, following part number should be used.
R08DS0039EJ0200 Rev.2.00
Sep 06, 2011
Page 3 of 17
A Business Partner of Renesas Electronics Corporation.
PS8551L4
Chapter Title
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)
Parameter
Symbol
Ratings
Unit
Operating Ambient Temperature
TA
−40 to ＋85
°C
Storage Temperature
Tstg
−55 to＋125
°C
VDD1, VDD2
0 to 5.5
V
Input Voltage
VIN+, VIN−
−2 to VDD1＋0.5
V
2 Seconds Transient Input Voltage
VIN+, VIN−
−6 to VDD1＋0.5
V
VOUT+, VOUT−
−0.5 to VDD2＋0.5
V
BV
5 000
Vr.m.s.
Supply Voltage
Output Voltage
Isolation Voltage
*1
*1 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output.
Pins 1-4 shorted together, 5-8 shorted together.
RECOMMENDED OPERATING CONDITIONS
Parameter
Operating Ambient Temperature
Supply Voltage
Input Voltage
(Accurate and Linear)
*1
Symbol
MIN.
MAX.
Unit
TA
−40
85
°C
VDD1, VDD2
4.5
5.5
V
VIN+, VIN−
−200
200
mV
*1 Using VIN− = 0 V (to be connected to GND1) is recommended. Avoid using VIN− of 2.5 V or more, because the
internal test mode is activated when the voltage VIN− reaches more than 2.5 V.
R08DS0039EJ0200 Rev.2.00
Sep 06, 2011
Page 4 of 17
A Business Partner of Renesas Electronics Corporation.
PS8551L4
Chapter Title
ELECTRICAL CHARACTERISTICS (DC Characteristics)
(TYP.: TA = 25°C, VIN+ = VIN− = 0 V, VDD1 = VDD2 = 5 V,
MIN., MAX.: refer to RECOMMENDED OPERATING CONDITIONS, unless otherwise specified)
Parameter
Symbol
Input Offset Voltage
Vos
Conditions
TA = 25°C
MIN.
TYP.
MAX.
Unit
−2
0.3
2
mV
3
−3
Input Offset Voltage Drift
⏐dVos/dTA⏐
vs. Temperature
Gain
G
*1
Gain Drift vs. Temperature
VOUT Non-linearity (200 mV)
TA = 25 to +85°C
−200 mV ≤ VIN+ ≤ 200 mV,
TA = 25°C
7.76
VOUT Non-linearity (200 mV) Drift
NL200
−200 mV ≤ VIN+ ≤ 200 mV
*2
Maximum Input Voltage before VOUT
Clipping
8.24
V/V
V/V°C
0.35
−100 mV ≤ VIN+ ≤ 100 mV
0.014
⏐VIN+⏐MAX.
%
%/°C
0.2
308
%
mV
Input Supply Current
IDD1
VIN+ = 400 mV
16
20
mA
Output Supply Current
IDD2
VIN+ = −400 mV
10
16
mA
Input Bias Current
IIN+
VIN+ = 0V
−0.5
5
μA
Input Bias Current Drift
vs. Temperature
⏐dIIN+/dTA⏐
0.45
nA/°C
Low Level Saturated Output Voltage
VOL
VIN+ = −400 mV
1.29
V
High Level Saturated Output Voltage
VOH
VIN+ = 400 mV
3.8
V
Output Voltage (VIN+ = VIN− = 0 V)
VOCM
VIN+ = VIN− = 0 V
2.2
2.55
2.8
V
Output Short-circuit Current
⏐IOSC⏐
18.6
mA
Equivalent Input Resistance
RIN
320
kΩ
ROUT
15
Ω
CMRRIN
76
dB
VOUT Output Resistance
<R>
8
0.0002
⏐dNL200/dTA⏐
NL100
μV/°C
0.021
vs. Temperature
VOUT Non-linearity (100 mV)
10
0.00087
⏐dG/dTA⏐
*2
3
Input DC Common-Mode Rejection
Ratio
*3
*1 The differential output voltage (VOUT+ − VOUT−) with respect to the differential input voltage (VIN+ − VIN−), where VIN+ =
−200 mV to 200 mV and VIN− = 0 V) is measured under the circuit shown in Fig. 2 NL200, G Test Circuit. Upon
the resulting chart, the gain is defined as the slope of the optimum line obtained by using the method of least
squares.
*2 The differential output voltage (VOUT+ − VOUT−) with respect to the differential input voltage (VIN+ − VIN−) is measured
under the circuit shown in Fig. 2 NL200, G Test Circuit. Upon the resulting chart, the optimum line is obtained by
using the method of least squares. Non-linearity is defined as the ratio (%) of the optimum line obtained by dividing
[Half of the peak to peak value of the (residual) deviation] by [full-scale differential output voltage].
For example, if the differential output voltage is 3.2 V, and the peak to peak value of the (residual) deviation is 22.4
mV, while the input VIN+ is ±200 mV, the output non-linearity is obtained as follows:
NL200 = 22.4/(2 × 3 200) = 0.35%
*3 CMRRIN is defined as the ratio of the differential signal gain (when the differential signal is applied between the
input pins) to the common-mode signal gain (when both input pins are connected and the signal is applied). This
value is indicated in dB.
R08DS0039EJ0200 Rev.2.00
Sep 06, 2011
Page 5 of 17
A Business Partner of Renesas Electronics Corporation.
PS8551L4
Chapter Title
ELECTRICAL CHARACTERISTICS (AC Characteristics)
(TYP.: TA = 25°C, VIN+ = VIN− = 0 V, VDD1 = VDD2 = 5 V,
MIN., MAX.: refer to RECOMMENDED OPERATING CONDITIONS, unless otherwise specified)
Parameter
Symbol
VOUT Bandwidth (−3 dB)
fC
Conditions
VIN+ = 200 mVp-p, sine wave
MIN.
TYP.
MAX.
50
100
kHz
mVr.m.s.
VOUT Noise
NOUT
VIN+ = 0 V
31.5
VIN to VOUT Signal Delay (50 to 10%)
tPD10
VIN+ = 0 to 150 mV step
2.03
3.3
VIN to VOUT Signal Delay (50 to 50%)
tPD50
4.01
5.6
VIN to VOUT Signal Delay (50 to 90%)
tPD90
6.02
9.9
VOUT Rise Time/Fall Time (10 to 90%)
tr/tf
VIN+ = 0 to 150 mV step
3.53
6.6
CMTI
VCM = 0.5 kV, TA = 25°C
PSR
f = 1 MHz
Common Mode Transient Immunity
Power Supply Noise Rejection
*2
*1
10
Unit
μs
μs
25
kV/μs
100
mVr.m.s.
*1 CMTI is tested by applying a pulse that rises and falls suddenly (VCM = 0.5 kV) between GND1 on the input side
and GND2 on the output side (pins 4 and 5) by using the circuit shown in Fig. 9 CMTI Test Circuit. CMTI is
defined at the point where the differential output voltage (VOUT+ − VOUT−) fluctuates 200 mV (>1 μs) or more from the
average output voltage.
*2 This is the value of the transient voltage at the differential output when 1 Vp-p, 1 MHz, and 40 ns rise/fall time
square wave is applied to both VDD1 and VDD2.
R08DS0039EJ0200 Rev.2.00
Sep 06, 2011
Page 6 of 17
A Business Partner of Renesas Electronics Corporation.
PS8551L4
Chapter Title
TEST CIRCUIT
Fig. 1 VOS Test Circuit
VDD2
VDD1
1
+15 V
8
0.1 μF 2
+
3
+
–
–
4
7 0.1 μF
10 kΩ
6
10 kΩ
5
0.47 μF 0.47 μF
SHIELD
+
AD624CD
(x100)
0.1 μF
VOUT
−
0.1 μF
–15 V
Fig. 2 NL200, G Test Circuit
VDD2
VDD1
1
VIN
0.1 μF 2
404 Ω
13.2 Ω
+
3
0.01 μF
+15 V
8
+
–
–
4
7 0.1 μF
10 kΩ
6
10 kΩ
5
0.47 μF 0.47 μF
SHIELD
+
AD624CD
(x4)
+15 V
0.1 μF
−
IDD1
0.1 μF
0.1μ F
5V
0.01 μF
400 mV
3
4
+
–
+
–
8
1
7
2
6
5
SHIELD
R08DS0039EJ0200 Rev.2.00
Sep 06, 2011
0.1 μF
–15 V
0.47 μF
Fig. 4 IDD2 Test Circuit
1
2
VOUT
−
–15 V
10 kΩ
Fig. 3 IDD1 Test Circuit
0.1 μF
+
AD624CD
(x10)
0.1μ F
5V
– 400
mV
0.01 μF
3
4
8
+
–
IDD2
7
+
–
6
5
0.1μ F
5V
SHIELD
Page 7 of 17
A Business Partner of Renesas Electronics Corporation.
PS8551L4
Chapter Title
Fig. 5 IIN+ Test Circuit
8
1
IIN+
0.1μ F
2
0.01 μF
3
4
5V
7
+
+
–
–
6
5
SHIELD
Fig. 6 VOUT Test Circuit
VOL
8
1
2
0.1μ F
5V
– 400
0.01 μF
3
4
mV
+
–
7
+
–
6
5
VOL
0.1μ F
5V
SHIELD
VOCM
1
2
0.1μ F
0.01 μF
3
4
5V
8
+
–
7
+
–
6
5
VOCM
0.1μ F
5V
SHIELD
VOH
8
1
2
0.1μ F
5V
400 mV
0.01 μF
3
4
+
–
7
+
–
6
5
VOH
0.1μ F
5V
SHIELD
R08DS0039EJ0200 Rev.2.00
Sep 06, 2011
Page 8 of 17
A Business Partner of Renesas Electronics Corporation.
PS8551L4
Chapter Title
Fig. 7 |IOSC| Test Circuit
0.1μ F
0.01 μF
1
8
2
7
3
4
5V
+
–
+
–
1
IOSC
6
2
0.1μ F
0.1μ F
5
5V
0.01 μF
3
4
5V
8
7
+
+
–
–
SHIELD
6
5
IOSC
0.1μ F
5V
SHIELD
Fig. 8 tPD Test Circuit
1
VIN
0.1 μF 2
3
0.01 μF
10 kΩ
VDD2
VDD1
4
+15 V
8
+
+
–
–
7 0.1 μF
2 kΩ
6
2 kΩ
5
VOUT
NE5534
10 kΩ
SHIELD
0.1 μF
−
+
0.1 μF
–15 V
Fig. 9 CMTI Test Circuit
150 pF
10 kΩ
VDD2
78L05
IN
9V
OUT
0.1 μF
1
0.1 μF 2
3
4
+15 V
8
+
+
–
–
7 0.1 μF
2 kΩ
6
2 kΩ
5
SHIELD
+
–
150 pF 10 kΩ
−
μPC813
+
0.1 μF
VOUT
0.1 μF
–15 V
VCM
R08DS0039EJ0200 Rev.2.00
Sep 06, 2011
Page 9 of 17
A Business Partner of Renesas Electronics Corporation.
PS8551L4
Chapter Title
TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified)
INPUT OFFSET VOLTAGE vs.
AMBIENT TEMPERATURE
2
2
Input Offset Voltage VOS (mV)
VDD1 = VDD2 = 5 V
VIN+ = VIN− = 0 V
1
0
−1
−2
−3
–50
–25
0
25
50
75
1
VIN+ = VIN− = 0 V
VDD2
VDD1
0.5
0
−0.5
−1
−1.5
4.75
5
5.25
Ambient Temperature TA (°C)
Supply Voltage VDD (V)
GAIN vs. AMBIENT TEMPERATURE
GAIN vs. SUPPLY VOLTAGE
0.35
Gain G (V/V)
VDD1 = VDD2 = 5 V
VIN+ = −200 mV to +200 mV,
VIN− = 0 V
Gain G (V/V)
8.24
8.2
8.16
8.12
8.08
8.04
8
7.96
7.92
7.88
7.84
7.8
7.76
–50
–25
0
25
50
75
100
VDD1
VDD2
4.75
5
5.25
NON-LINEARITY vs.
AMBIENT TEMPERATURE
NON-LINEARITY vs.
SUPPLY VOLTAGE
VDD1 = VDD2 = 5 V
VIN+ = −200 mV to +200 mV,
VIN− = 0 V
0.2
0.15
0.1
0.05
–25
0
25
50
75
100
Ambient Temperature TA (°C)
0.35
5.5
VIN+ = −200 mV to +200 mV,
VIN− = 0 V
Supply Voltage VDD (V)
0.25
0
–50
8.24
8.2
8.16
8.12
8.08
8.04
8
7.96
7.92
7.88
7.84
7.8
7.76
4.5
Ambient Temperature TA (°C)
0.3
Non-linearity NL200 (%)
1.5
−2
4.5
100
5.5
VIN+ = −200 mV to +200 mV,
VIN− = 0 V
0.3
Non-linearity NL200 (%)
Input Offset Voltage VOS (mV)
3
INPUT OFFSET VOLTAGE vs.
SUPPLY VOLTAGE
0.25
0.2
0.15
0.1
VDD1
VDD2
0.05
0
4.5
4.75
5
5.25
5.5
Supply Voltage VDD (V)
Remark The graphs indicate nominal characteristics.
R08DS0039EJ0200 Rev.2.00
Sep 06, 2011
Page 10 of 17
A Business Partner of Renesas Electronics Corporation.
PS8551L4
Chapter Title
INPUT VOLTAGE vs. OUTPUT VOLTAGE
SUPPLY CURRENT vs. INPUT VOLTAGE
20
4
Output Voltage VO (V)
VOUT−
3
2.5
2
VOUT+
1.5
1
−0.4
0
−0.2
0.2
12
10
IDD2
8
6
4
0
−0.4
0.4
IDD1
14
VDD1 = VDD2 = 5 V
−0.2
0
0.2
0.4
Input Voltage VIN (V)
Input Voltage VIN (V)
INPUT CURRENT vs. INPUT VOLTAGE
GAIN vs. FREQUENCY
5
1
4
0
3
−1
2
−2
1
0
−1
−2
−5
−0.4
−4
−5
VDD1 = VDD2 = 5 V,
−7 VIN− = 0 V
VIN+ = 200 mVp−p sine wave
−8
10
100
1 000 10 000 100 000
VDD1 = VDD2 = 5 V
VIN− = 0 V
0
−0.2
0.2
0.4
Input Voltage VIN+ (V)
Frequency f (Hz)
PHASE vs. FREQUENCY
SIGNAL DELAY TIME vs.
AMBIENT TEMPERATURE
7
Signal Delay Time PD (μs)
50
0
−50
−100
−150
−3
−6
−3
−4
Phase (Deg.)
16
2
VDD1 = VDD2 = 5 V
Gain GV (dB)
Input Current IIN+ (μA)
Supply Current IDD (mA)
18
3.5
VDD1 = VDD2 = 5 V, VIN− = 0 V
VIN+ = 200 mVp−p sine wave
−200
10
100
1 000
10 000 100 000
1 000 000
Frequency f (Hz)
6
5
4
3
2
1 000 000
tPD90
tPD50
tr
tPD10
1
VDD1 = VDD2 = 5 V, VIN− = 0 V
VIN+ = 0 to 150 mV step
0
−50
−25
0
25
50
75
100
Ambient Temperature TA (°C)
Remark The graphs indicate nominal characteristics.
R08DS0039EJ0200 Rev.2.00
Sep 06, 2011
Page 11 of 17
A Business Partner of Renesas Electronics Corporation.
PS8551L4
Chapter Title
7.5±0.1
1.5 +0.1
–0
4.65 MAX.
10.55±0.1
2.0±0.1
4.0±0.1
16.0±0.3
Outline and Dimensions (Tape)
1.75±0.1
TAPING SPECIFICATIONS (UNIT: mm)
4.2±0.1
9.95±0.1
1.55±0.1
12.0±0.1
0.3±0.05
Tape Direction
PS8551L4-E3
Outline and Dimensions (Reel)
2.0±0.5
21.0±0.8
100±1.0
R 1.0
330±2.0
2.0±0.5
13.0±0.2
17.5±1.0
21.5±1.0
Packing: 1 000 pcs/reel
R08DS0039EJ0200 Rev.2.00
Sep 06, 2011
15.9 to 19.4
Outer edge of
flange
Page 12 of 17
A Business Partner of Renesas Electronics Corporation.
PS8551L4
Chapter Title
RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm)
B
C
D
A
Part Number
PS8551L4
Lead Bending
lead bending type (Gull-wing)
for surface mount
R08DS0039EJ0200 Rev.2.00
Sep 06, 2011
A
B
C
D
9.0
2.54
1.7
2.0
Page 13 of 17
A Business Partner of Renesas Electronics Corporation.
PS8551L4
Chapter Title
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
• Peak reflow temperature
260°C or below (package surface temperature)
• Time of temperature higher than 220°C
60 seconds or less
• Time of peak reflow temperature
10 seconds or less
• Time to preheat temperature from 120 to 180°C
120±30 s
• Flux
Rosin flux containing small amount of chlorine (The flux with a
• Number of reflows
Three
maximum chlorine content of 0.2 Wt% is recommended.)
Package Surface Temperature T (°C)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
260°C MAX.
220°C
to 60 s
180°C
120°C
120±30 s
(preheating)
Time (s)
(2) Wave soldering
• Temperature
260°C or below (molten solder temperature)
• Time
10 seconds or less
• Number of times
One (Allowed to be dipped in solder including plastic mold portion.)
• Preheating conditions
• Flux
120°C or below (package surface temperature)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content
of 0.2 Wt% is recommended.)
(3) Soldering by Soldering Iron
• Peak Temperature (lead part temperature)
• Time (each pins)
• Flux
350°C or below
3 seconds or less
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead
R08DS0039EJ0200 Rev.2.00
Sep 06, 2011
Page 14 of 17
A Business Partner of Renesas Electronics Corporation.
PS8551L4
Chapter Title
(4) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output at startup, the output
transistor may enter the on state, even if the voltage is within the absolute maximum ratings.
USAGE CAUTIONS
1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static
electricity when handling.
2. Board designing
(1) By-pass capacitor of more than 0.1 μF is used between VCC and GND near device. Also, ensure that the
distance between the leads of the photocoupler and capacitor is no more than 10 mm.
(2) Keep the pattern connected the input (VIN+, VIN−) and the output (VOUT+, VOUT−), respectively, as short as
possible.
(3) Do not connect any routing to the portion of the frame exposed between the pins on the package of the
photocoupler. If connected, it will affect the photocoupler's internal voltage and the photocoupler will not
operate normally.
(4) Because the maximum frequency of the signal input to the photocoupler must be lower than the allowable
frequency band, be sure to connect an anti-aliasing filter (an RC filter with R = 68 Ω and C = 0.01 μF, for
example).
(5) The signals output from the PS8551 include noise elements such as chopping noise and quantization noise
generated internally. Therefore, be sure to restrict the output frequency to the required bandwidth by adding a
low-pass filter function (an RC filter with R =10 kΩ and C = 150 pF, for example) to the operational amplifier
(post amplifier) in the next stage to the PS8551.
3. Avoid storage at a high temperature and high humidity.
R08DS0039EJ0200 Rev.2.00
Sep 06, 2011
Page 15 of 17
A Business Partner of Renesas Electronics Corporation.
PS8551L4
Chapter Title
SPECIFICATION OF VDE MARKS LICENSE DOCUMENT
Parameter
Symbol
Climatic test class (IEC 60068-1/DIN EN 60068-1)
Dielectric strength
Spec.
Unit
40/085/21
UIORM
Upr
1 130
1 695
Vpeak
Vpeak
Test voltage (partial discharge test, procedure b for all devices)
Upr
2 119
Vpeak
Highest pe rmissible overvoltage
UTR
8 000
Vpeak
maximum operating isolation voltage
Test voltage (partial discharge test, procedure a for type test and random test)
Upr = 1.5 × UIORM, Pd < 5 pC
Upr = 1.875 × UIORM, Pd < 5 pC
Degree of pollution (DIN EN 60664-1 VDE0110 Part 1)
Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303 Part 11))
2
CTI
Material group (DIN EN 60664-1 VDE0110 Part 1)
175
III a
Storage temperature range
Tstg
–55 to +125
°C
Operating temperature range
TA
–40 to +85
°C
Ris MIN.
Ris MIN.
10
11
10
Ω
Ω
Package temperature
Tsi
175
Power (output or total power dissipation)
Psi
700
mW
10
Ω
Isolation resistance, minimum value
VIO = 500 V dc at TA = 25°C
VIO = 500 V dc at TA MAX. at least 100°C
12
Safety maximum ratings (maximum permissible in case of fault, see thermal
derating curve)
Current (input current IF, Psi = 0)
Isolation resistance
VIO = 500 V dc at TA = Tsi
R08DS0039EJ0200 Rev.2.00
Sep 06, 2011
Isi
Ris MIN.
400
9
°C
mA
Page 16 of 17
A Business Partner of Renesas Electronics Corporation.
PS8551L4
Caution
Chapter Title
GaAs Products
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
R08DS0039EJ0200 Rev.2.00
Sep 06, 2011
Page 17 of 17
Revision History
PS8551L4 Data Sheet
Rev.
Date
Page
−
1.00
Sep 2007
Jun 14, 2011
−
Throughout
Throughout
p.3
p.4
2.00
Sep 06, 2011
p.5
p.6
pp.7 to 9
pp.10, 11
p.13
p.15
p.16
p.3
p.5
Description
Summary
Previous No. :PN10670EJ01V0DS
Preliminary Data Sheet -> Data Sheet
Safety standards approved
Modification of MARKING EXAMPLE
Addition of ORDERING INFORMATION
Modification of ABSOLUTE MAXIMUM RATINGS
Modification of RECOMMENDED OPERATING CONDITIONS
Modification of ELECTRICAL CHARACTERISTICS (DC Characteristics)
Modification of SWITCHING CHARACTERISTICS (ADC Characteristics)
Addition of TEST CIRCUIT
Addition of TYPICAL CHARACTERISTICS
Addition of RECOMMENDED MOUNT
Modification of USAGE CAUTIONS
Addition of SPECIFICATION OF VDE MARKS LICENSE DOCUMENT
Modification of MARKING EXAMPLE
Modification of ELECTRICAL CHARACTERISTICS (DC Characteristics) CMRRIN
All trademarks and registered trademarks are the property of their respective owners.
C-1