UPG2413T6M

GaAs INTEGRATED CIRCUIT
PG2413T6M
D
SP3T SWITCH FOR BluetoothTM AND 802.11b/g
UE
DESCRIPTION
The PG2413T6M is a GaAs MMIC SP3T switch which was developed for Bluetooth, wireless LAN.
This device can operate frequencies from 0.5 to 3.0 GHz, with low insertion loss.
This device is housed in a 12-pin plastic TSQFN (Thin Small Quad Flat Non-leaded) (T6M) package and is
suitable for high-density surface mounting.
FEATURES
• Switch Control voltage
• Low insertion loss
: Vcont (H) = 3.0 V TYP., Vcont (L) = 0 V TYP.
O
NT
IN
: Lins = 0.35 dB TYP. @ f = 1.0 GHz
: Lins = 0.45 dB TYP. @ f = 2.0 GHz
: Lins = 0.50 dB TYP. @ f = 2.5 GHz
• High isolation
: ISL = 26 dB TYP. @ f = 1.0 GHz
: ISL = 20 dB TYP. @ f = 2.0 GHz
: ISL = 18 dB TYP. @ f = 2.5 GHz
• Handling power
: Pin (0.1 dB) = +28.0 dBm TYP. @ f = 2.5 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V
• High-density surface mounting
APPLICATIONS
: 12-pin plastic TSQFN (T6M) package (2.0  2.0  0.37 mm)
• Bluetooth and IEEE802.11b/g etc.
ORDERING INFORMATION
Part Number
PG2413T6M-E2
Order Number
Package
Marking
PG2413T6M-E2-A
12-pin plastic TSQFN
2413
(T6M) (Pb-Free)
Supplying Form
 Embossed tape 8 mm wide
 Pin 10, 11, 12 face the perforation side of the tape
SC
 Qty 3 kpcs/reel
Remark To order evaluation samples, please contact your nearby sales office.
DI
Part number for sample order: PG2413T6M-A
Caution Although this device is designed to be as robust as possible, ESD (Electrostatic
Discharge) can damage this device. This device must be protected at all times from ESD. Static
charges may easily produce potentials of several kilovolts on the human body or equipment, which
can discharge without detection. Industry-standard ESD precautions must be employed at all times.
Document No. PG10792EJ01V0DS (1st edition)
Date Published February 2010 NS
PG2413T6M
PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM
Pin Name
1
RFC
2
GND
3
Vcont1
4
RF1
5
GND
6
RF2
7
Vcont2
8
GND
9
Vcont3
10
RF3
11
GND
12
GND
O
NT
IN
UE
D
Pin No.
Remark Exposed pad : GND
TRUTH TABLE
Vcont1
High
Low
Vcont3
RFCRF1
RFCRF2
RFCRF3
Low
Low
ON
OFF
OFF
High
Low
OFF
ON
OFF
Low
High
OFF
OFF
ON
DI
SC
Low
Vcont2
2
Data Sheet PG10792EJ01V0DS
PG2413T6M
ABSOLUTE MAXIMUM RATINGS (T A = +25C, unless otherwise specified)
Switch Control Voltage
Symbol
Ratings
+6.0
Vcont
Unit
Note
V
Pin
+26
dBm
Input Power (Vcont (H) = 2.3 V)
Pin
+28
dBm
Input Power (Vcont (H) = 3.0 V)
Pin
+32
dBm
Input Power (Vcont (H) = 3.6 V)
Pin
+34
dBm
Operating Ambient Temperature
TA
45 to +85
C
Storage Temperature
Tstg
55 to +150
Note Vcont (H)  Vcont (L)  6.0 V
RECOMMENDED OPERATING RANGE (T A = +25C)
Symbol
MIN.
TYP.
C
MAX.
Unit
O
NT
IN
Parameter
UE
Input Power (Vcont (H) = 1.8 V)
f
0.5

3.0
GHz
Switch Control Voltage (H)
Vcont (H)
1.8
3.0
3.6
V
Switch Control Voltage (L)
Vcont (L)
0.2
0
0.2
V
Control Voltage Difference (H)
Vcont (H)
0.1
0
0.1
V
Control Voltage Difference (L)
Vcont (L)
0.1
0
0.1
V
Operating Frequency
D
Parameter
Note1
Note2
Notes 1. Vcont (H) is a difference between the maximum and the minimum control voltages among V cont1 (H), Vcont2
(H)
and Vcont3 (H).
2. Vcont (L) is a difference between the maximum and the minimum control voltages among V cont1 (L), Vcont2
and Vcont3 (L).
DI
SC
(L)
Data Sheet PG10792EJ01V0DS
3
PG2413T6M
ELECTRICAL CHARACTERISTICS 1
(T A = +25C, Vcont (H) = 3.0 V, Vcont (L) = 0 V, ZO = 50 , DC blocking capacitors = 56 pF, unless
otherwise specified)
Lins
Isolation
0.1 dB Loss Compression
Input Power
Note 1
MIN.
TYP.
MAX.
Unit
f = 0.5 to 1.0 GHz

0.35
0.60
dB
f = 1.0 to 2.0 GHz

f = 2.0 to 2.5 GHz

f = 2.5 to 3.0 GHz

1 dB Loss Compression
Note 2
Input Power
0.45
0.70
dB
0.50
0.75
dB
0.60

dB
f = 0.5 to 1.0 GHz
23
26

dB
(OFF)
f = 1.0 to 2.0 GHz
17
20

dB
f = 2.0 to 2.5 GHz
15
18

dB
f = 2.5 to 3.0 GHz

16

dB
RLC
f = 0.5 to 3.0 GHz
15
20

dB
RL1, 2, 3
f = 0.5 to 3.0 GHz
15
20

dB
O
NT
IN
Return Loss (RF1, 2, 3)
RFC to RF1, 2, 3
Test Conditions
RFC to RF1, 2, 3
ISL
Return Loss (RFC)
Pass
D
Insertion Loss
Symbol
UE
Parameter
Pin (0.1 dB)
RFC to RF1, 2, 3
f = 2.5 GHz
+25.0
+28.0

dBm
Pin (1 dB)
RFC to RF1, 2, 3
f = 2.5 GHz,

+27.0

dBm

+31.0

dBm

+33.0

dBm

75

dBc

75

dBc
Vcont (H) = 2.3 V
f = 2.5 GHz,
Vcont (H) = 3.0 V
f = 2.5 GHz,
Vcont (H) = 3.6 V
2nd Harmonics
2f0
f = 2.5 GHz,
Pin = 23 dBm
3rd Harmonics
3f0
f = 2.5 GHz,
Pin = 23 dBm
Switch Control Current
Icont
No RF input

0.1
5.0
A
Switch Control Speed
tSW
50% CTL to

50

ns
SC
90/10% RF
Notes 1. Pin (0.1 dB) is the measured input power level when the insertion loss increases 0.1 dB more than that of
the linear range.
2. Pin (1 dB) is the measured input power level when the insertion loss increases 1 dB more than that of the
linear range.
DI
Caution It is necessary to use DC blocking capacitors with this device.
4
Data Sheet PG10792EJ01V0DS
PG2413T6M
ELECTRICAL CHARACTERISTICS 2
(T A = +25C, Vcont (H) = 1.8 V, Vcont (L) = 0 V, ZO = 50 , DC blocking capacitors = 56 pF, unless
otherwise specified)
Lins
Isolation
0.1 dB Loss Compression
Input Power
Note 1
1 dB Loss Compression
Input Power
Note 2
2nd Harmonics
MIN.
TYP.
MAX.
Unit
f = 0.5 to 1.0 GHz

0.35
0.65
dB
f = 1.0 to 2.0 GHz

f = 2.0 to 2.5 GHz

f = 2.5 to 3.0 GHz

0.45
0.75
dB
0.50
0.80
dB
0.65

dB
f = 0.5 to 1.0 GHz
22.5
25.5

dB
(OFF)
f = 1.0 to 2.0 GHz
16.5
19.5

dB
f = 2.0 to 2.5 GHz
14.5
17.5

dB
f = 2.5 to 3.0 GHz

15.5

dB
RLC
f = 0.5 to 3.0 GHz
15
20

dB
RL1, 2, 3
f = 0.5 to 3.0 GHz
15
20

dB
O
NT
IN
Return Loss (RF1, 2, 3)
RFC to RF1, 2, 3
Test Conditions
RFC to RF1, 2, 3
ISL
Return Loss (RFC)
Pass
D
Insertion Loss
Symbol
UE
Parameter
Pin (0.1 dB)
RFC to RF1, 2, 3
f = 2.5 GHz
+19.0
+22.0

dBm
Pin (1 dB)
RFC to RF1, 2, 3
f = 2.5 GHz
+21.0
+25.0

dBm
f = 2.5 GHz,

75

dBc

75

dBc
2f0
Pin = 17 dBm
3rd Harmonics
3f0
f = 2.5 GHz,
Pin = 17 dBm
Switch Control Current
Icont
No RF input

0.1
5.0
A
Switch Control Speed
tSW
50% CTL to

50

ns
90/10% RF
Notes 1. Pin (0.1 dB) is the measured input power level when the insertion loss increases 0.1 dB more than that of
the linear range.
2. Pin (1 dB) is the measured input power level when the insertion loss increases 1 dB more than that of the
SC
linear range.
DI
Caution It is necessary to use DC blocking capacitors with this device.
Data Sheet PG10792EJ01V0DS
5
PG2413T6M
O
NT
IN
UE
D
EVALUATION CIRCUIT
The application circuits and their parameters are for reference only and are not intended for use in actual design-ins.
DI
SC
APPLICATION INFORMATION
• CB are DC blocking capacitors external to the device.
A value of 56 pF is sufficient for operation from 500 MHz to 2.5 GHz bands.
The value may be tailored to provide specific electrical responses.
• The RF ground connections should be kept as short as possible and connected to directly to a good RF ground
for best performance.
• LESD provides a means to increase the ESD protection on a specific RF port, typically the port attached to the
antenna.
6
Data Sheet PG10792EJ01V0DS
PG2413T6M
DI
SC
O
NT
IN
UE
D
TYPICAL CHARACTERISTICS (TA = +25C, DC blocking capacitors = 56 pF, unless otherwise specified)
Remark The graphs indicate nominal characteristics.
Data Sheet PG10792EJ01V0DS
7
O
NT
IN
UE
D
PG2413T6M
DI
SC
Remark The graphs indicate nominal characteristics.
8
Data Sheet PG10792EJ01V0DS
PG2413T6M
MOUNTING PAD AND SOLDER MASK LAYOUT DIMENSIONS
SC
O
NT
IN
UE
D
12-PIN PLASTIC TSQFN (T6M) (UNIT: mm)
DI
Remark The mounting pad and solder mask layouts in this document are for reference only.
When designing PCB, please consider workability of mounting, solder joint reliability, prevention of
solder bridge and so on, in order to optimize the design.
Data Sheet PG10792EJ01V0DS
9
PG2413T6M
PACKAGE DIMENSIONS
SC
Remark A > 0
O
NT
IN
UE
D
12-PIN PLASTIC TSQFN (T6M) (UNIT: mm)
DI
( ): Reference value
10
Data Sheet PG10792EJ01V0DS
PG2413T6M
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions.
For soldering
methods and conditions other than those recommended below, contact your nearby sales office.
Soldering Method
Partial Heating
Condition Symbol
: 260C or below
Time at peak temperature
: 10 seconds or less
Time at temperature of 220C or higher
: 60 seconds or less
Preheating time at 120 to 180C
: 12030 seconds
Maximum number of reflow processes
: 3 times
Maximum chlorine content of rosin flux (% mass)
: 0.2%(Wt.) or below
Peak temperature (terminal temperature)
: 350C or below
Soldering time (per side of device)
IR260
D
Peak temperature (package surface temperature)
UE
Infrared Reflow
Soldering Conditions
Maximum chlorine content of rosin flux (% mass)
HS350
: 3 seconds or less
: 0.2%(Wt.) or below
DI
SC
O
NT
IN
Caution Do not use different soldering methods together (except for partial heating).
Data Sheet PG10792EJ01V0DS
11
PG2413T6M
Caution GaAs Products
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the
following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
D
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
DI
SC
O
NT
IN
UE
• Do not lick the product or in any way allow it to enter the mouth.
12
Data Sheet PG10792EJ01V0DS