datasheet: pdf

GaAs INTEGRATED CIRCUIT
PG2015TB
D
L, S-BAND SPDT SWITCH
UE
DESCRIPTION
The PG2015TB is a GaAs MMIC for L, S-band SPDT (Single Pole Double Throw) switch which were developed
for mobile phone and another L, S-band application.
This device can operate frequency from 0.5 GHz to 2.5 GHz, having the low insertion loss and high isolation.
This device is housed in a 6-pin super minimold package. And this package is able to high-density surface
mounting.
FEATURES
• Supply voltage
O
NT
IN
: VDD = 2.7 to 3.0 V (2.8 V TYP.)
• Switch control voltage
: Vcont (H) = 2.7 to 3.0 V (2.8 V TYP.)
• Low insertion loss
: LINS1 = 0.25 dB TYP. @ f = 0.5 to 1.0 GHz, VDD = 2.8 V, Vcont = 2.8 V/0 V
: Vcont (L) = 0.2 to +0.2 V (0 V TYP.)
: LINS2 = 0.30 dB TYP. @ f = 1.0 to 2.0 GHz, VDD = 2.8 V, Vcont = 2.8 V/0 V
: LINS3 = 0.35 dB TYP. @ f = 2.5 GHz, VDD = 2.8 V, Vcont = 2.8 V/0 V
• High isolation
: ISL1 = 27 dB TYP. @ f = 0.5 to 2.0 GHz, VDD = 2.8 V, Vcont = 2.8 V/0 V
: ISL2 = 24 dB TYP. @ f = 2.5 GHz, VDD = 2.8 V, Vcont = 2.8 V/0 V
• Middle power
: Pin(0.1 dB) = +27.0 dBm TYP. @ f = 2.5 GHz, VDD = 2.8 V, Vcont = 2.8 V/0 V
• High-density surface mounting : 6-pin super minimold package (2.0  1.25  0.9 mm)
APPLICATIONS
• L-band digital cellular or cordless telephone
• PCS, W-LAN, WLL and BluetoothTM etc.
SC
ORDERING INFORMATION
Part Number
PG2015TB-E3
Package
6-pin super minimold
Marking
G3J
Supplying Form
 Embossed tape 8 mm wide
 Pin 1, 2, 3 face the perforation side of the tape
 Qty 3 kpcs/reel
Remark To order evaluation samples, contact your nearby sales office.
DI
Part number for sample order: PG2015TB-A
Caution: Observe precautions when handling because these devices are sensitive to electrostatic discharge
Document No. PG10356EJ02V0DS (2nd edition)
Date Published August 2003 CP(K)
PG2015TB
PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM
Pin Name
1
OUTPUT1
2
GND
3
OUTPUT2
4
Vcont
5
INPUT
6
VDD
TRUTH TABLE
INPUTOUTPUT1
INPUTOUTPUT2
Low
OFF
ON
High
ON
OFF
O
NT
IN
Vcont
UE
D
Pin No.
ABSOLUTE MAXIMUM RATINGS (T A = +25C, unless otherwise specified)
Parameter
Symbol
Ratings
Unit
VDD
+6.0
V
Vcont
+6.0
V
Pin
+33
dBm
Operating Ambient Temperature
TA
45 to +85
C
Storage Temperature
Tstg
55 to +150
C
Supply Voltage
Switch Control Voltage
Input Power
RECOMMENDED OPERATING RANGE (T A = +25C, unless otherwise specified)
Parameter
Supply Voltage
MIN.
TYP.
MAX.
Unit
VDD
2.7
2.8
3.0
V
Vcont(H)
2.7
2.8
3.0
V
0.2
0
0.2
V
SC
Switch Control Voltage (H)
Symbol
Vcont(L)
DI
Switch Control Voltage (L)
2
Data Sheet PG10356EJ02V0DS
PG2015TB
ELECTRICAL CHARACTERISTICS
(T A = +25C, VDD = 2.8 V, Vcont = 2.8 V/0 V, DC cut capacitors = 56 pF, unless otherwise specified)
Parameter
Symbol
Test Conditions
MIN.
TYP.
MAX.
Unit
LINS1
f = 0.5 to 1.0 GHz

0.25
0.45
dB
Insertion Loss 2
LINS2
f = 1.0 to 2.0 GHz

0.30
0.50
dB
Insertion Loss 3
LINS3
f = 2.5 GHz

Isolation 1
ISL1
f = 0.5 to 2.0 GHz
23
Isolation 2
ISL2
f = 2.5 GHz
20
Input Return Loss
RLin
f = 0.5 to 2.5 GHz
Output Return Loss
RLout
f = 0.5 to 2.5 GHz
Input Power
Pin(0.1 dB) f = 2.0 GHz
Note
f = 2.5 GHz
IDD
Switching Control Current
Icont
Switching Control Speed
0.55
dB
27

dB
24

dB
15
20

dB
15
20

dB
+25.5
+27.0

dBm
+25.5
+27.0

dBm

50
100
A

4
20
A
0.3
2.0
s
O
NT
IN
Supply Current
0.35
UE
0.1 dB Gain Compression
D
Insertion Loss 1

tSW
Note Pin(0.1dB) is measured the input power level when the insertion loss increases more 0.1 dB than that of linear
range.
STANDARD CHARACTERISTICS FOR REFERENCE
(T A = +25C, VDD = 2.8 V, Vcont = 2.8 V/0 V, DC cut capacitors = 56 pF, unless otherwise specified)
Parameter
1 dB Gain Compression
Input Power
Note
Symbol
Pin(1 dB)
Test Conditions
f = 2.0 GHz
MIN.
TYP.
MAX.
Unit

+30.0

dBm
Note Pin(1dB) is measured the input power level when the insertion loss increases more 1 dB than that of linear
range.
SC
Caution This device is used it is necessary to use DC cut capacitors.
The value of DC cut capacitors should be chosen to accommodate the frequency of operation,
bandwidth, switching speed and the condition with actual board of your system. The range of
DI
recommended DC cut capacitor value is less than 100 pF.
Data Sheet PG10356EJ02V0DS
3
PG2015TB
O
NT
IN
UE
D
EVALUATION CIRCUIT (VDD = 2.8 V, Vcont = 2.8 V/0 V, DC cut capacitors = 56 pF)
DI
SC
The application circuits and their parameters are for reference only and are not intended for use in actual design-ins.
4
Data Sheet PG10356EJ02V0DS
PG2015TB
SC
O
NT
IN
UE
D
ILLUSTRATION OF THE TEST CIRCUIT ASSEMBLED ON EVALUATION BOARD
USING THE EVALUATION BOARD
Symbol
C1, C2, C3
56 pF
1 000 pF
DI
C4, C5
Values
Data Sheet PG10356EJ02V0DS
5
PG2015TB
DI
SC
O
NT
IN
UE
D
TYPICAL CHARACTERISTICS
(T A = +25C, VDD = 2.8 V, Vcont = 2.8 V/0 V, DC cut capacitors = 56 pF, unless otherwise specified)
Remark The graphs indicate nominal characteristics.
6
Data Sheet PG10356EJ02V0DS
O
NT
IN
UE
D
PG2015TB
DI
SC
Remark The graphs indicate nominal characteristics.
Data Sheet PG10356EJ02V0DS
7
PG2015TB
PACKAGE DIMENSIONS
DI
SC
O
NT
IN
UE
D
6-PIN SUPER MINIMOLD (UNIT: mm)
8
Data Sheet PG10356EJ02V0DS
PG2015TB
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions.
For soldering
methods and conditions other than those recommended below, contact your nearby sales office.
Soldering Method
VPS
: 260C or below
Time at peak temperature
: 10 seconds or less
Time at temperature of 220C or higher
: 60 seconds or less
Preheating time at 120 to 180C
: 12030 seconds
Maximum number of reflow processes
: 3 times
Maximum chlorine content of rosin flux (% mass)
: 0.2%(Wt.) or below
Peak temperature (package surface temperature)
: 215C or below
Time at temperature of 200C or higher
: 25 to 40 seconds
Maximum number of reflow processes
: 3 times
: 0.2%(Wt.) or below
Peak temperature (molten solder temperature)
: 260C or below
WS260
: 10 seconds or less
O
NT
IN
Partial Heating
VP215
: 30 to 60 seconds
Maximum chlorine content of rosin flux (% mass)
Time at peak temperature
IR260
D
Peak temperature (package surface temperature)
Preheating time at 120 to 150C
Wave Soldering
Condition Symbol
UE
Infrared Reflow
Soldering Conditions
Preheating temperature (package surface temperature)
: 120C or below
Maximum number of flow processes
: 1 time
Maximum chlorine content of rosin flux (% mass)
: 0.2%(Wt.) or below
Peak temperature (pin temperature)
: 350C or below
Soldering time (per side of device)
: 3 seconds or less
Maximum chlorine content of rosin flux (% mass)
: 0.2%(Wt.) or below
HS350
DI
SC
Caution Do not use different soldering methods together (except for partial heating).
Data Sheet PG10356EJ02V0DS
9
PG2015TB
Caution GaAs Products
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the
following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
D
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
DI
SC
O
NT
IN
UE
• Do not lick the product or in any way allow it to enter the mouth.
10
Data Sheet PG10356EJ02V0DS