PS7141C-2A

Solid State Relay
OCMOS FET
PS7141C-2A,PS7141CL-2A
8-PIN DIP, 200 mA TYP.
CURRENT LIMIT TYPE
2-ch Optical Coupled MOS FET
−NEPOC Series−
DESCRIPTION
The PS7141C-2A and PS7141CL-2A are solid state relays containing GaAs LEDs on the light emitting side (input
side) and MOS FETs including current control circuit on the output side. Current control circuit of OCMOS FET
protects this device from thermal breakdown and output circuit.
They are suitable for analog signal control because of their low offset and high linearity.
The PS7141CL-2A has a surface mount type lead.
FEATURES
• Limit current (ILMT = 170 to 250 mA)
• 2 channel type (1 a + 1 a output)
• Low LED operating current (IF = 2 mA)
• Designed for AC/DC switching line changer
• Small package (8-pin DIP)
• Low offset voltage
• Ordering number of taping product : PS7141CL-2A-E3, E4: 1 000 pcs/reel
<R>
• Pb-Free product
<R>
• Safety standards
• UL approved: File No. E72422
• BSI approved: No. 8245/8246
• CSA approved: No. CA 101391
APPLICATIONS
• Exchange equipment
• Measurement equipment
• FA/OA equipment
Document No. PN10283EJ02V0DS (2nd edition)
Date Published July 2006 NS CP(K)
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
1998, 2006
PS7141C-2A,PS7141CL-2A
PACKAGE DIMENSIONS (in millimeters)
PS7141C-2A
9.25±0.5
TOP VIEW
8
7
6
5
1
2
3
4
1.
2.
3.
4.
5.
6.
7.
8.
LED Anode
LED Cathode
LED Anode
LED Cathode
MOS FET
MOS FET
MOS FET
MOS FET
1.
2.
3.
4.
5.
6.
7.
8.
LED Anode
LED Cathode
LED Anode
LED Cathode
MOS FET
MOS FET
MOS FET
MOS FET
7.62
3.3±0.3
3.5±0.3
4.15±0.3
6.5±0.5
0 to 15˚
0.5±0.1
1.34±0.1
0.25 M
2.54
PS7141CL-2A
9.25±0.5
TOP VIEW
8
7
6
5
1
2
3
4
3.5±0.3
0.10+0.10
–0.05
6.5±0.5
1.34±0.1
0.25 M
2
0.9±0.25
2.54
9.60±0.4
Data Sheet PN10283EJ02V0DS
PS7141C-2A,PS7141CL-2A
<R>
MARKING EXAMPLE
No. 1 pin
Mark
PS7141C-2A
NL601
Country Assembled
Type Number
Assembly Lot
N L 6 01
Week Assembled
Year Assembled
(Last 1 Digit)
In-house Code
(L: Pb-Free)
Rank Code
Data Sheet PN10283EJ02V0DS
3
PS7141C-2A,PS7141CL-2A
<R>
ORDERING INFORMATION
Part Number
Order Number
Solder Plating
Packing Style
Safety Standard
Application Part
Approval
Number
Specification
PS7141C-2A
PS7141C-2A-A
Pb-Free
PS7141CL-2A
PS7141CL-2A-A
PS7141CL-2A-E3
PS7141CL-2A-E3-A
Magazine case 50 pcs
Standard products PS7141C-2A
(UL, BSI, CSA
Embossed Tape 1 000
approved)
pcs/reel
PS7141CL-2A-E4
PS7141CL-2A-E4-A
*1 For the application of the Safety Standard, following part number should be used.
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)
Parameter
Symbol
Ratings
Unit
Forward Current (DC)
IF
50
mA/ch
Reverse Voltage
VR
5.0
V
Power Dissipation
PD
50
mW/ch
IFP
1
A/ch
Break Down Voltage
VL
400
V
Continuous Load Current
IL
120
mA/ch
ILP
120
mA/ch
PD
375
mW/ch
BV
1 500
Vr.m.s.
Total Power Dissipation
PT
850
mW
Operating Ambient Temperature
TA
−40 to +85
°C
Storage Temperature
Tstg
−40 to +100
°C
Diode
Peak Forward Current
MOS FET
Pulse Load Current
*1
*2
(AC/DC Connection)
Power Dissipation
Isolation Voltage
*3
*1 PW = 100 µs, Duty Cycle = 1%
*2 PW = 100 ms, 1 shot
*3 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output.
Pins 1-4 shorted together, 5-8 shorted together.
RECOMMENDED OPERATING CONDITIONS (TA = 25°C)
Parameter
Symbol
MIN.
TYP.
MAX.
Unit
LED Operating Current
IF
2
10
20
mA
LED Off Voltage
VF
0
0.5
V
4
Data Sheet PN10283EJ02V0DS
*1
PS7141C-2A,PS7141CL-2A
ELECTRICAL CHARACTERISTICS (TA = 25°C)
Parameter
Diode
MOS FET
Symbol
Conditions
Forward Voltage
VF
IF = 10 mA
Reverse Current
IR
VR = 5 V
Off-state Leakage
ILoff
VD = 400 V
Output Capacitance
Cout
VD = 0 V, f = 1 MHz
LED On-state Current
IFon
IL = 120 mA
On-state Resistance
Ron1
IF = 10 mA, IL = 10 mA
MIN.
TYP.
MAX.
Unit
1.2
1.4
V
5.0
µA
1.0
µA
0.03
Current
Coupled
65
pF/ch
2.0
mA
26
35
Ω
Ron2
IF = 10 mA, IL = 120 mA, t ≤ 10 ms
22
30
Turn-on Time
*1, 2
ton
IF = 10 mA, VO = 5 V, RL = 500 Ω,
0.6
2.0
Turn-off Time
*1, 2
toff
PW ≥ 10 ms
0.03
1.0
Isolation Resistance
RI-O
VI-O = 1.0 kVDC
10
Isolation Capacitance
CI-O
V = 0 V, f = 1 MHz
Limit Current
ILMT
IF = 10 mA, t = 5 ms, VL = 6 V
ms
Ω
9
1.1
170
200
pF/ch
250
mA/ch
*1 Test Circuit for Switching Time
IF
Pulse Input
VL
50 %
Input
0
VO = 5 V
Input monitor
90 %
VO monitor
Output
Rin
RL
10 %
ton
<R>
toff
*2 The turn-on time and turn-off time are specified as input-pulse width ≥ 10 ms.
Be aware that when the device operates with an input-pulse width less than 10 ms, the turn-on time and turn-off
time will increase.
Data Sheet PN10283EJ02V0DS
5
PS7141C-2A,PS7141CL-2A
TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified)
MAXIMUM FORWARD CURRENT vs.
AMBIENT TEMPERATURE
MAXIMUM LOAD CURRENT vs.
AMBIENT TEMPERATURE
300
Maximum Load Current IL (mA)
Maximum Forward Current IF (mA)
100
80
60
40
20
0
–25
0
25
75 85
50
200
100
0
–25
100
0
25
75 85
50
Ambient Temperature TA (˚C)
Ambient Temperature TA (˚C)
FORWARD VOLTAGE vs.
AMBIENT TEMPERATURE
OUTPUT CAPACITANCE vs.
APPLIED VOLTAGE
1.8
100
200
1.6
1.4
Output Capacitance Cout (pF)
Forward Voltage VF (V)
f = 1 MHz
IF = 50 mA
30 mA
20 mA
10 mA
5 mA
1 mA
1.2
1.0
0.8
–25
0
25
50
75
150
100
50
0
100
20
40
60
80
100
120
Ambient Temperature TA (˚C)
Applied Voltage VD (V)
OFF-STATE LEAKAGE CURRENT vs.
APPLIED VOLTAGE
LOAD CURRENT vs. LOAD VOLTAGE
–5
IF = 10 mA,
t = 5 ms
TA = 85 ˚C
10–6
Load Current IL (mA)
Off-state Leakage Current ILoff (A)
10
10–7
25 ˚C
10–8
100
–8.0
–4.0
0
–100
–200
10–9
0
100
200
300
400
500
Load Voltage VL (V)
Applied Voltage VD (V)
Remark The graphs indicate nominal characteristics.
6
200
Data Sheet PN10283EJ02V0DS
4.0
8.0
PS7141C-2A,PS7141CL-2A
NORMALIZED ON-STATE RESISTANCE vs.
AMBIENT TEMPERATURE
ON-STATE RESISTANCE DISTRIBUTION
30
Normalized to 1.0
at TA = 25 ˚C,
IF = 10 mA,
IL = 10 mA
2.5
2.0
1.5
1.0
n = 50 pcs,
IF = 10 mA,
IL = 10 mA
25
Number (pcs)
Normalized On-state Resistance Ron
3.0
20
15
10
5
0.5
0.0
–25
0
25
50
75
0
100
25
26
Ambient Temperature TA (˚C)
On-state Resistance Ron (Ω)
TURN-ON TIME vs. FORWARD CURRENT
TURN-OFF TIME vs. FORWARD CURRENT
6
0.30
VO = 5 V
VO = 5 V
0.25
Turn-off Time toff (ms)
Turn-on Time ton (ms)
5
4
3
2
0.15
0.10
0.05
1
0
0.20
5
10
15
20
25
0
30
Forward Current IF (mA)
15
20
25
30
TURN-OFF TIME DISTRIBUTION
TURN-ON TIME DISTRIBUTION
30
n = 50 pcs,
IF = 10 mA,
VO = 5 V
25
20
15
10
n = 50 pcs,
IF = 10 mA,
VO = 5 V
25
Number (pcs)
Number (pcs)
10
Forward Current IF (mA)
30
20
15
10
5
5
0
5
0.6
0
0.7
Turn-on Time ton (ms)
0.03
0.06
Turn-off Time toff (ms)
Remark The graphs indicate nominal characteristics.
Data Sheet PN10283EJ02V0DS
7
PS7141C-2A,PS7141CL-2A
NORMALIZED TURN-OFF TIME vs.
AMBIENT TEMPERATURE
NORMALIZED TURN-ON TIME vs.
AMBIENT TEMPERATURE
Normalized to 1.0
at TA = 25 ˚C,
IF = 10 mA,
VO = 5 V
2.5
2.0
1.5
1.0
0.5
0.0
–25
0
25
50
75
100
3.0
Normalized Turn-off Time toff
Normalized Turn-on Time ton
3.0
2.5
2.0
1.5
1.0
0.5
0.0
–25
NORMALIZED LIMIT CURRENT vs.
AMBIENT TEMPERTURE
Normalized Limit Current ILMT
3.0
Normalized to 1.0
at TA = 25 ˚C,
IF = 10 mA,
t = 5 ms, VL = 6 V
2.0
1.5
1.0
0.5
0.0
–25
0
25
50
75
100
Ambient Temperature TA (˚C)
Remark The graphs indicate nominal characteristics.
8
0
25
50
75
Ambient Temperature TA (˚C)
Ambient Temperature TA (˚C)
2.5
Normalized to 1.0
at TA = 25 ˚C,
IF = 10 mA,
VO = 5 V
Data Sheet PN10283EJ02V0DS
100
PS7141C-2A,PS7141CL-2A
TAPING SPECIFICATIONS (in millimeters)
4.5 MAX.
10.3±0.1
7.5±0.1
1.5 +0.1
–0
16.0±0.3
2.0±0.1
4.0±0.1
1.75±0.1
Outline and Dimensions (Tape)
4.0±0.1
10.4±0.1
1.55±0.1
12.0±0.1
0.3
Tape Direction
PS7141CL-2A-E3
PS7141CL-2A-E4
Outline and Dimensions (Reel)
2.0±0.5
R 1.0
21.0±0.8
100±1.0
330±2.0
2.0±0.5
13.0±0.2
17.5±1.0
21.5±1.0
Packing: 1 000 pcs/reel
Data Sheet PN10283EJ02V0DS
15.9 to 19.4
Outer edge of
flange
9
PS7141C-2A,PS7141CL-2A
RECOMMENDED SOLDERING CONDITIONS
(1) Infrared reflow soldering
• Peak reflow temperature
260°C or below (package surface temperature)
• Time of peak reflow temperature
10 seconds or less
• Time of temperature higher than 220°C
60 seconds or less
• Time to preheat temperature from 120 to 180°C
120±30 s
• Number of reflows
Three
• Flux
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Package Surface Temperature T (˚C)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
260˚C MAX.
220˚C
to 60 s
180˚C
120˚C
120±30 s
(preheating)
Time (s)
(2) Wave soldering
• Temperature
260°C or below (molten solder temperature)
• Time
10 seconds or less
• Preheating conditions
120°C or below (package surface temperature)
• Number of times
One
• Flux
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
<R>
(3) Soldering by soldering iron
• Peak temperature (lead part temperature)
350°C or below
• Time (each pins)
3 seconds or less
• Flux
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100°C.
(4) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
10
Data Sheet PN10283EJ02V0DS
PS7141C-2A,PS7141CL-2A
<R>
USAGE CAUTIONS
1. Protect against static electricity when handling.
2. Avoid storage at a high temperature and high humidity.
Data Sheet PN10283EJ02V0DS
11
PS7141C-2A,PS7141CL-2A
• The information in this document is current as of July, 2006. The information is subject to change
without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or
data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all
products and/or types are available in every country. Please check with an NEC Electronics sales
representative for availability and additional information.
• No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may
appear in this document.
• NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from the use of NEC Electronics products listed in this document
or any other liability arising from the use of such products. No license, express, implied or otherwise, is
granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
• Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of a customer's equipment shall be done under the full
responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by
customers or third parties arising from the use of these circuits, software and information.
• While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products,
customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To
minimize risks of damage to property or injury (including death) to persons arising from defects in NEC
Electronics products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment and anti-failure features.
• NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and
"Specific".
The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC
Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of
each NEC Electronics product before using it in a particular application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots.
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support).
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to
determine NEC Electronics' willingness to support a given application.
(Note)
(1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its
majority-owned subsidiaries.
(2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as
defined above).
M8E 02. 11-1
12
Data Sheet PN10283EJ02V0DS
PS7141C-2A,PS7141CL-2A
Caution
GaAs Products
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
For further information, please contact
NEC Compound Semiconductor Devices Hong Kong Limited
E-mail: [email protected]
Hong Kong Head Office TEL: +852-3107-7303
FAX: +852-3107-7309
Taipei Branch Office
TEL: +886-2-8712-0478 FAX: +886-2-2545-3859
Korea Branch Office
TEL: +82-2-558-2120
FAX: +82-2-558-5209
NEC Electronics (Europe) GmbH
http://www.eu.necel.com/
TEL: +49-211-6503-0
FAX: +49-211-6503-1327
California Eastern Laboratories, Inc.
http://www.cel.com/
TEL: +1-408-988-3500
FAX: +1-408-988-0279
Compound Semiconductor Devices Division
NEC Electronics Corporation
URL: http://www.ncsd.necel.com/
0604
4590 Patrick Henry Drive
Santa Clara, CA 95054-1817
Telephone: (408) 919-2500
Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant
with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous
Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive
2003/11/EC Restriction on Penta and Octa BDE.
CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates
that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are
exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals.
All devices with these suffixes meet the requirements of the RoHS directive.
This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that
go into its products as of the date of disclosure of this information.
Restricted Substance
per RoHS
Concentration Limit per RoHS
(values are not yet fixed)
Concentration contained
in CEL devices
-A
Not Detected
Lead (Pb)
< 1000 PPM
Mercury
< 1000 PPM
Not Detected
Cadmium
< 100 PPM
Not Detected
Hexavalent Chromium
< 1000 PPM
Not Detected
PBB
< 1000 PPM
Not Detected
PBDE
< 1000 PPM
Not Detected
-AZ
(*)
If you should have any additional questions regarding our devices and compliance to environmental
standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance
content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information
provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better
integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate
information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL
suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for
release.
In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to
customer on an annual basis.
See CEL Terms and Conditions for additional clarification of warranties and liability.