Solid State Relays Overview and Applications (AN3000)

California Eastern Laboratories
A PPLICATION N OTE
Solid State Relays Overview And Applications
AN3000
CONTENTS
1. INTRODUCTION....................................................................................................................................................... 2
2. FEATURES, STRUCTURES, COMPOSITION AND THEORY OF OPERATION .................................................... 3
2.1
FEATURES ...................................................................................................................................................... 3
2.2
STRUCTURES................................................................................................................................................. 3
2.3
COMPOSITION................................................................................................................................................ 6
2.4
THEORY OF OPERATION .............................................................................................................................. 6
3. MAINLY CHARACTERISTICS ....................................................................................................... .......................... 7
3.1
OFFSET VOLTAGE ......................................................................................................................................... 7
3.2
TEMPERATURE CHARACTERISTICS ........................................................................................................... 8
4. CHARACTERISTICS VALUES AND MEASURING CHARACTERISTIC VALUES............................................... 15
4.1
CHARACTERISTICS VALUES ...................................................................................................................... 15
4.2
MEASURING CHARACTERISTIC VALUES .................................................................................................. 16
5. APPLICATIONS...................................................................................................................................................... 19
5.1
COMMUNICATION LINES ............................................................................................................................. 19
5.2
INPUT/OUTPUT INTERFACE ....................................................................................................................... 22
5.3
LOW-LEVEL/ANALOG SIGNAL CONTROL .................................................................................................. 24
6. COMPARISION WITH OTHER SWITCHING DEVICES......................................................................................... 25
7. CAUTIONS FOR USE............................................................................................................................................. 26
8. CONCLUSION ........................................................................................................................................................ 29
AN3000
1.
INTRODUCTIION
The SSR that NEC has started marketing uses a photocoupler system with a MOS FET, explained in the following,
as an output switch and a combination of an Emitter and Photo Detector to drive the switch.
NEC’s SSR is named a “OCMOS FET (Opto-Coupled MOS FET)” as the input and output are isolated with a
photocoupler and the MOS FET switch is used as an output switch.
The OCMOS FET using a photo Detector to drive the MOS FET is a new type of SSR developed recently and
being commercialized.
An OCMOS FET operates this way: A control signal applied to the OCMOS FET input terminals triggers the output
switch of the OCMOS FET, which, in turn, opens or closes the output terminals.
A normally-off type (which is functionally the same as a “make contact” mechanical relay) leaves the output
terminals open, if there is no input signal, and short-circuits the output terminals if an input signal above the threshold
level is applied. Conversely, a normally-on type (which is functionally the same as a “break contact” mechanical
relay) keeps the output terminals short-circuited, if there is no input signal, and opens the output terminals by an
input signal.
2
AN3000
2.
FEATURES, STRUCTURES, COMPOSITION AND THEORY OF OPERATION
2.1 FEATURES
The general features of OCMOS FET as follows:
1) High sensitivity and low driving power. Can be driven directly by a TTL or CMOS.
2) Can switch low to high-voltage level signals or an AC/DC load current at a low power level.
3) Extremely low offset voltage (in the on-state) and very small leakage current (in the off-state). Applicable even
to low-level signals.
4) dv/dt insensitive, No possibility of malfunction caused by noise signals due to abrupt startup. No thermal
runaway, as seen bipolar elements.
5) Use of bidirectional MOS FET support DC and AC switching.
6) A compact DIP/SOP package which can be mounted like other electronic components.
2.2 STRUCTURES
Compared with a mechanical relay, the input and output control sections, made up of the LED and PVD in the
OCMOS FET, correspond to the coil in the mechanical relay. They isolate the input from output and generate an
output control signal on receipt of an input signal.
The MOS FET in the OCMOS FET corresponds to the contact in the mechanical relay, opening and closing the
load circuit.
Figure 1 shows the OCMOS FET structure. Figure 2 shows the sectional view. The semiconductor chip, a
subcomponent of the OCMOS FET is mounted at a required position on the metal support, called a lead frame, also
serving as a terminal, using conducting paste. (The procedure is called chip mounting.)
Next, the chip electrodes are connected to a fine gold wire to the lead, which becomes a terminal. (The procedure
is called wire bonding.) Then as regards face-to-face type, the LED and PVD are covered with transparent silicone
rubber to form an optical path. This is put into a furnace for hardening and then molded with epoxy resin.
There is more than one kind of structure that links LED and PVD (called a photocoupler structure). Table 1 shows
an example of the structure type and Table 2 compares the different structures. (NEC’s OCMOS FET series are
face-to-face type and double mold type.)
3
AN3000
Figure 1. OCMOS FET STRUCTURE
LED
PHOTO-TRANSPAREN AREA
MOS FET
PHOTO DETECTOR,
CONTROL CIRCUIT
Figure 2. SECTIONAL VIEW
Face-to-face type
PS71 ss, PS72 ss, PS75 ss
LED
4
Double mold type
PS73 ss
LED
Photo Detector
Photo Detector
AN3000
Table 1. Photocoupler Structure
No.
1
Structure type
Structure
Face-to-face format
LED
Silicon resin
Epoxy resin
PVD
2
Coplanar format
Transparent silicon resin
White silicon resin
Epoxy resin
LED
PVD
3
Insulated format
Glass or polymide film
White epoxy resin
4
Double mold format
Transparent epoxy resin
Silicon resin
Table 2. Photocoupler Structure (Internal view)
Moisture
Optical Transmission
Insulation
Structure type
Efficiency
Stability
Resistance
Productivity
Face-to-face format
Good
Fair
Fair
Fair
Fair
Coplanar format
Fair
Good
Good
Fair
Excellent
Insulated format
Excellent
Fair
Good
Fair
Poor
Double mold format
Fair
Good
Excellent
Good
Fair
5
AN3000
2.3 COMPOSITION
As shown in Figure 3, the NEC OCMOS FET consists of an Emitter, Photo Detector, Control Circuit, and the MOS
FET.
Emitter: LED
Control Circuit
Light
signal
Photo Detector
Input
Emitter
Figure 3. OCMOS FET COMPOSITION
MOS FET
Output
Photo Detector: PVD (Photo Voltaic Diode)
2.4 THEORY OF OPERATION
Normally-off type. Theory of operation as follows.
When an input signal current flows across the input terminals, the LED emits light. Some of the light is shot
directly into the PVD via the transparent silicon layer, while the rest of the light reaches the PVD after being reflected
from the transparent silicon boundary surface. On receiving the light, the PVD generates a current corresponding to
the amount of incident radiation received.
The current passes through the control section to charge the MOS FET gate capacity, raising the gate voltage.
When the gate voltage reaches a certain voltage value, current flows between the MOS FET drain and source. Since
the drain and source are connected to the output terminals, the external load circuit across the output terminals is
closed.
When the input signal current is disconnected, the LED stops emission and the PVD voltage drops. In this
condition, the charges stored in the MOS FET gate are not released quickly, instead the FET remains conductive. If
the control circuit is operated to cause the MOS FET gate charges to be released quickly, the MOS FET gate voltage
will be dropped. If the voltage drops to a certain level, the MOS FET drain and source will be isolated again.
6
AN3000
3.
MAINLY CHARACTERISTICS
3.1 OFFSET VOLTAGE
Figure 4 shows LOAD CURRENT (IL)-LOAD VOLTAGE (VL) characteristic for the MOS FET. When VL is low, the
current changes, as in a DC in a DC resistor. That is, there is no offset voltage.
Figure 4. Comparing OCMOS FET with a Photocoupler and Thyristor
(b) Photocoupler
Load Current IL (mA)
Load Current IL (mA)
(a) OCMOS FET
Load Voltage VL (V)
Load Voltage VL (V)
Load Current IL (mA)
(c) Thyristor
Load Voltage VL (V)
7
AN3000
3.2 TEMPERATURE CHARACTERISTICS
3.2.1 TURN-ON TIME CHARACTERISTICS
Figure 5 shows the NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE and the TURN-ON TIME
DISTRIBUTION of a normally-off type OCMOS FET. (Such as the PS7112, PS7113, PS7122, PS7141, PS7142 and
PS7160 OCMOS FET.)
3.2.2 TURN-OFF TIME CHARACTERISTICS
Figure 6 shows the NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE and the TURN-OFF TIME
DISTRIBUTION of a normally-off type OCMOS FET. (Such as the PS7112, PS7113, PS7122, PS7141, PS7142 and
PS7160 OCMOS FET.)
3.2.3 ON-STATE RESISTANCE CHARACTERISTICS
Figure 7 shows the NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE and the ON-STATE
RESISTANCE DISTRIBUTION of a normally-off type OCMOS FET.
PS7141, PS7142 and PS7160 OCMOS FET.)
8
(Such as the PS7112, PS7113, PS7122,
AN3000
Figure 5. NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE AND TURN-ON TIME DISTRIBUTION (1/2)
1) PS7112-1A, PS7112L-1A
TURN-ON TIME DISTRIBUTION (TA = 25 ÝC)
NORMALIZED TURN-ON TIME vs.
AMBIENT TEMPERATURE
30
Normalized to 1.0 at
TA = 25 ÝC,
IF = 10 mA, VL = 5 V,
RL = 500 7
2.5
n = 50 pcs,
IF = 10 mA,
VL = 5 V,
RL = 500 7
25
2.0
Number (pcs)
Normalized Turn-on Time ton
3.0
1.5
1.0
20
15
10
0.5
5
0
–25
0
25
50
75
0
100
0.1
0.2
0.3
Turn-on Time ton (ms)
Ambient Temperature TA (ÝC)
2) PS7113-1A, -2A, PS7113L-1A, -2A
TURN-ON TIME DISTRIBUTION (TA = 25 ÝC)
NORMALIZED TURN-ON TIME vs.
AMBIENT TEMPERATURE
30
Normalized to 1.0 at
TA = 25 ÝC,
IF = 10 mA, VL = 5 V,
RL = 500 7
2.5
n = 50 pcs,
IF = 10 mA,
VL = 5 V,
RL = 500 7
25
2.0
Number (pcs)
Normalized Turn-on Time ton
3.0
1.5
1.0
0.5
20
15
10
5
0
–25
0
25
50
75
0
1.0
100
1.1
1.2
1.3
1.4
1.5
1.6
Turn-on Time ton (ms)
Ambient Temperature TA (ÝC)
3) PS7122-1A, -2A, PS7122L-1A, -2A
TURN-ON TIME DISTRIBUTION (TA = 25 ÝC)
NORMALIZED TURN-ON TIME vs.
AMBIENT TEMPERATURE
30
Normalized to 1.0 at
TA = 25 ÝC,
IF = 10 mA, VL = 5 V,
RL = 500 7
2.5
2.0
1.5
1.0
0.5
0
–25
n = 50 pcs,
IF = 10 mA,
VL = 5 V,
RL = 500 7
25
Number (pcs)
Normalized Turn-on Time ton
3.0
20
15
10
5
0
25
50
75
Ambient Temperature TA (ÝC)
100
0
0.4
0.5
0.6
0.7
0.8
Turn-on Time ton (ms)
9
AN3000
Figure 5. NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE AND TURN-ON TIME DISTRIBUTION (2/2)
4) PS7141-1A, PS7141L-1A
TURN-ON TIME DISTRIBUTION (TA = 25 ÝC)
NORMALIZED TURN-ON TIME vs.
AMBIENT TEMPERATURE
30
Normalized to 1.0 at
TA = 25 ÝC,
IF = 10 mA, VL = 5 V,
RL = 500 7
2.5
2.0
1.5
1.0
0.5
0
–25
n = 50 pcs,
IF = 10 mA,
VL = 5 V,
RL = 500 7
25
Number (pcs)
Normalized Turn-on Time ton
3.0
20
15
10
5
0
25
50
75
0
100
0.3
0.4
Turn-on Time ton (ms)
Ambient Temperature TA (ÝC)
5) PS7142-1A, PS7142L-1A
TURN-ON TIME DISTRIBUTION (TA = 25 ÝC)
NORMALIZED TURN-ON TIME vs.
AMBIENT TEMPERATURE
30
Normalized to 1.0 at
TA = 25 ÝC,
IF = 10 mA, VL = 5 V,
RL = 500 7
2.5
2.0
1.5
1.0
0.5
0
–25
n = 50 pcs,
IF = 10 mA,
VL = 5 V,
RL = 500 7
25
Number (pcs)
Normalized Turn-on Time ton
3.0
20
15
10
5
0
25
50
75
0
100
2.0
3.0
Turn-on Time ton (ms)
Ambient Temperature TA (ÝC)
6) PS7160-1A, PS7160L-1A
TURN-ON TIME DISTRIBUTION (TA = 25 ÝC)
NORMALIZED TURN-ON TIME vs.
AMBIENT TEMPERATURE
30
Normalized to 1.0 at
TA = 25 ÝC,
IF = 10 mA, VL = 5 V,
RL = 500 7
2.5
2.0
1.5
1.0
0.5
0
–25
20
15
10
5
0
25
50
75
Ambient Temperature TA (ÝC)
10
n = 50 pcs,
IF = 10 mA,
VL = 5 V,
RL = 500 7
25
Number (pcs)
Normalized Turn-on Time ton
3.0
100
0
0.6
0.7
0.8
0.9
Turn-on Time ton (ms)
1.0
AN3000
Figure 6. NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE AND TURN-OFF TIME DISTRIBUTION (1/2)
1) PS7112-1A, PS7112L-1A
TURN-OFF TIME DISTRIBUTION (TA = 25 ÝC)
NORMALIZED TURN-OFF TIME vs.
AMBIENT TEMPERATURE
30
Normalized to 1.0 at
TA = 25 ÝC,
IF = 10 mA, VL = 5 V,
RL = 500 7
2.5
2.0
1.5
1.0
0.5
0
–25
n = 50 pcs,
IF = 10 mA,
VL = 5 V,
RL = 500 7
25
Number (pcs)
Normalized Turn-off Time toff
3.0
20
15
10
5
0
25
50
75
0
100
0.04
0.08
Turn-off Time toff (ms)
Ambient Temperature TA (ÝC)
2) PS7113-1A, -2A, PS7113L-1A, -2A
TURN-OFF TIME DISTRIBUTION (TA = 25 ÝC)
NORMALIZED TURN-OFF TIME vs.
AMBIENT TEMPERATURE
30
Normalized to 1.0 at
TA = 25 ÝC,
IF = 10 mA, VL = 5 V,
RL = 500 7
2.5
2.0
1.5
1.0
0.5
0
–25
n = 50 pcs,
IF = 10 mA,
VL = 5 V,
RL = 500 7
25
Number (pcs)
Normalized Turn-off Time toff
3.0
20
15
10
5
0
25
50
75
0
0.02
100
0.04
0.08
0.10
Turn-off Time toff (ms)
Ambient Temperature TA (ÝC)
3) PS7122-1A, -2A, PS7122L-1A, -2A
TURN-OFF TIME DISTRIBUTION (TA = 25 ÝC)
NORMALIZED TURN-OFF TIME vs.
AMBIENT TEMPERATURE
30
Normalized to 1.0 at
TA = 25 ÝC,
IF = 10 mA, VL = 5 V,
RL = 500 7
2.5
2.0
1.5
1.0
0.5
0
–25
n = 50 pcs,
IF = 10 mA,
VL = 5 V,
RL = 500 7
25
Number (pcs)
Normalized Turn-off Time toff
3.0
20
15
10
5
0
25
50
75
Ambient Temperature TA (ÝC)
100
0
0.04
0.08
Turn-off Time toff (ms)
11
AN3000
Figure 6. NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE AND TURN-OFF TIME DISTRIBUTION (2/2)
4) PS7141-1A, PS7141L-1A
TURN-OFF TIME DISTRIBUTION (TA = 25 ÝC)
NORMALIZED TURN-OFF TIME vs.
AMBIENT TEMPERATURE
30
Normalized to 1.0 at
TA = 25 ÝC,
IF = 10 mA, VL = 5 V,
RL = 500 7
2.5
2.0
1.5
1.0
0.5
0
–25
n = 50 pcs,
IF = 10 mA,
VL = 5 V,
RL = 500 7
25
Number (pcs)
Normalized Turn-off Time toff
3.0
20
15
10
5
0
25
50
75
0
100
0.04
0.08
Turn-off Time toff (ms)
Ambient Temperature TA (ÝC)
5) PS7142-1A, PS7142L-1A
TURN-OFF TIME DISTRIBUTION (TA = 25 ÝC)
NORMALIZED TURN-OFF TIME vs.
AMBIENT TEMPERATURE
30
Normalized to 1.0 at
TA = 25 ÝC,
IF = 10 mA, VL = 5 V,
RL = 500 7
2.5
2.0
1.5
1.0
0.5
0
–25
n = 50 pcs,
IF = 10 mA,
VL = 5 V,
RL = 500 7
25
Number (pcs)
Normalized Turn-off Time toff
3.0
20
15
10
5
0
25
50
75
0
100
0.04
0.08
Turn-off Time toff (ms)
Ambient Temperature TA (ÝC)
6) PS7160-1A, PS7160L-1A
TURN-OFF TIME DISTRIBUTION (TA = 25 ÝC)
NORMALIZED TURN-OFF TIME vs.
AMBIENT TEMPERATURE
30
Normalized to 1.0 at
TA = 25 ÝC,
IF = 10 mA, VL = 5 V,
RL = 500 7
2.5
2.0
1.5
1.0
0.5
0
–25
20
15
10
5
0
25
50
75
Ambient Temperature TA (ÝC)
12
n = 50 pcs,
IF = 10 mA,
VL = 5 V,
RL = 500 7
25
Number (pcs)
Normalized Turn-off Time toff
3.0
100
0
0.04
0.08
Turn-off Time toff (ms)
AN3000
Figure 7. NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE AND TURN-ON TIME DISTRIBUTION
(1/2)
1) PS7112-1A, PS7112L-1A
ON-STATE RESISTANCE DISTRIBUTION (TA = 25 ÝC)
NORMALIZED ON-STATE RESISTANCE vs.
AMBIENT TEMPERATURE
30
Normalized to 1.0 at
TA = 25 ÝC,
IF = 5 mA, IL = 1 mA
2.5
2.0
20
1.5
1.0
0.5
0
–25
n = 50 pcs,
IF = 5 mA,
IL = 1 mA
25
Number (pcs)
Normalized On-State Resistance Ron
3.0
15
10
5
0
25
50
75
0
100
2.8
2.9
3.0
On-State Resistance Ron (7)
Ambient Temperature TA (ÝC)
2) PS7113-1A, -2A, PS7113L-1A, -2A
ON-STATE RESISTANCE DISTRIBUTION (TA = 25 ÝC)
NORMALIZED ON-STATE RESISTANCE vs.
AMBIENT TEMPERATURE
30
Normalized to 1.0 at
TA = 25 ÝC,
IF = 5 mA, IL = 1 mA
2.5
2.0
20
1.5
1.0
0.5
0
–25
n = 50 pcs,
IF = 5 mA,
IL = 1 mA
25
Number (pcs)
Normalized On-State Resistance Ron
3.0
15
10
5
0
25
50
75
0
100
0.8
0.9
1.0
On-State Resistance Ron (7)
Ambient Temperature (ÝC)
3) PS7122-1A, 2A, PS7122L-1A, -2A
ON-STATE RESISTANCE DISTRIBUTION (TA = 25 ÝC)
NORMALIZED ON-STATE RESISTANCE vs.
AMBIENT TEMPERATURE
30
Normalized to 1.0 at
TA = 25 ÝC,
IF = 5 mA, IL = 1 mA
2.5
2.0
20
1.5
1.0
0.5
0
–25
n = 50 pcs,
IF = 5 mA,
IL = 1 mA
25
Number (pcs)
Normalized On-State Resistance Ron
3.0
15
10
5
0
25
50
75
Ambient Temperature TA (ÝC)
100
0
2.8
2.9
3.0
3.1
3.2
On-State Resistance Ron (7)
13
AN3000
Figure 7. NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE AND TURN-ON TIME DISTRIBUTION (2/2)
4) PS7141-1A, PS7141L-1A
ON-STATE RESISTANCE DISTRIBUTION (TA = 25 ÝC)
NORMALIZED ON-STATE RESISTANCE vs.
AMBIENT TEMPERATURE
30
Normalized to 1.0
at TA = 25 ÝC,
IF = 5 mA, IL = 1 mA
2.5
n = 50 pcs,
IF = 5 mA,
IL = 1 mA
25
2.0
20
Number (pcs)
Normalized On-State Resistance Ron
3.0
1.5
1.0
0.5
15
10
5
0
–25
0
25
50
75
0
100
20
21
On-State Resistance Ron (7)
Ambient Temperature TA (ÝC)
5) PS7142-1A, PS7142L-1A
ON-STATE RESISTANCE DISTRIBUTION (TA = 25 ÝC)
NORMALIZED ON-STATE RESISTANCE vs.
AMBIENT TEMPERATURE
30
Normalized to 1.0
at TA = 25 ÝC,
IF = 5 mA, IL = 1 mA
2.5
n = 50 pcs,
IF = 5 mA,
IL = 1 mA
25
2.0
20
Number (pcs)
Normalized On-State Resistance Ron
3.0
1.5
1.0
0.5
15
10
5
0
–25
0
25
50
75
0
100
20
21
On-State Resistance Ron (7)
Ambient Temperature TA (ÝC)
6) PS7160-1A, PS7160L-1A
ON-STATE RESISTANCE DISTRIBUTION (TA = 25 ÝC)
NORMALIZED ON-STATE RESISTANCE vs.
AMBIENT TEMPERATURE
30
Normalized to 1.0
at TA = 25 ÝC,
IF = 5 mA, IL = 1 mA
2.5
2.0
20
1.5
1.0
0.5
0
–25
15
10
5
0
25
50
75
Ambient Temperature TA (ÝC)
14
n = 50 pcs,
IF = 5 mA,
IL = 1 mA
25
Number (pcs)
Normalized On-State Resistance Ron
3.0
100
0
41
42
On-State Resistance Ron (7)
43
AN3000
4.
CHARACTERISTICS VALUES AND MEASURING CHARACTERISTIC VALUES
4.1 CHARACTERISTICS VALUES
Table 3. OCMOS FET CHARACTERISTICS VALUES
Classification
LED
MOS FET
Coupled
Symbol
Item
Measuring Circuit Number
VF
Forward voltage
1
IF
Forward current (DC)
1
VR
Reverse voltage
2
IR
Reverse current
2
Ct
Input capacitance
3
PD
Power dissipation
?
VL
Breakdown voltage
4
ILoff
Off-state leakage current
5
Ron
On-state resistence
6
CO
Ou tput ca pacit an ce
7
RI-O
Isolation resistence
8
BV
Isolation voltage (AC voltage for 1 minute at TA = 25 ºC, RH = 60 %
between input and output).
9
CI-O
Isolation capacitance
10
ton
turn-on time
11
toff
turn-off time
11
SOA
Safe operation area (DC)
?
SOA
Safe operation area (pulse)
?
15
AN3000
4.2 MEASURING CHARACTERISTIC VALUES
Table 4. Measuring OCMOS FET Characteristic Values (1/3)
Measuring
Characteristic
Circuit
Value
Measuring Method and Conditions
Measuring Circuit
Number
1
Forward voltage (VF)
Let a required current flow across control
input terminals and measure the voltage.
(Control input side)
IF
IF = 10 (mA)
2
Reverse current (IR)
V VF
Apply a voltage across control input
terminals in a direction opposite to normal
and measure the current.
VR = 5 V
VR = 5 (V)
A
IR
3
Input capacitance (Ct)
Connect an LCR meter to control input
terminals and measure the electrostatic
capacitance.
A
V
V = 0 (V), f = 1 (MHz)
LCR meter, etc.
4
Breakdown voltage (VL)
Step up a voltage slowly across switching
terminals and measure the voltage at
which a required current begins flowing.
V
ID(BD) = (to be defined)
A
Semiconductor
multimeter, etc.
5
Off state leakage current
(ILoff)
Apply a required voltage across switching
terminals and measure the current.
VD(BD) = Rated voltage (V)
ILoff
A
Semiconductor
multimeter, etc.
6
On-state resistance (Ron)
Let a required current flow across control
input terminals, close the switch, and
measure the resistance across the
terminals.
IF
V
A
IF = 5 (mA)
IL = 1 (mA)
16
ID (on)
Ron =
V
IL
AN3000
Table 4. Measuring OCMOS FET Characteristic Values (2/3)
Measuring
Characteristic
Circuit
Value
Measuring Method and Conditions
Measuring Circuit
Number
7
Output capacitance (CO)
Connect an LCR meter across switching
terminals, apply a required DC overlapping
voltage, and measure the electrostatic
capacitance.
A
V
V = 0 (V), f = 1 (MHz)
8
Isolation resistance (RI-O)
LCR meter
Connect an Isolation resistance meter
between control input terminals and
switching terminals, apply a required
voltage, and measure the resistance.
VI-O = 1 (kV)
VI-O
A
RI-O = VI-O
II-O
9
Isolation voltage (BV)
Isolation
resistance
meter
AC voltage for 1 minute at TA = 25 ºC,
RH = 60 % between input and output.
A
II-O < 0.5 mA
10
Isolation capacitance
(CI-O)
Dielectric
strength
measuring
meter
Connect an LCR meter between control
input terminals and switching terminals
and measure the electrostatic capacitance.
V = 0 (V), f = 1 (MHz)
V
A
LCR meter
17
AN3000
Table 4. Measuring OCMOS FET Characteristic Values (3/3)
Measuring
Characteristic
Circuit
Measuring Method and Conditions
Value
Measuring Circuit
Number
11
turn-on time (ton)
turn-off time (toff)
Apply a rectangular wave AC voltage, to
cause a required current to flow across
control input terminals, and connect a load
across switching terminals that satisfies a
required current and voltage. Measure the
waveforms for the voltages across control
input terminals and across switching
terminals, using a time measuring
instrument like an oscilloscope, as shown
at the right.
VL
RL
V1
V2
Oscilloscope
90 %
V1
10 %
IF = 10 (mA)
90 %
RL
(to be defined)
V2
10 %
VL
ton
18
toff
AN3000
5.
APPLICATIONS
With the above features and characteristics, this OCMOS FET is suitable for the following uses: And Table 5
shows OCMOS FET LINE-UP and application.
5.1 COMMUNICATION LINES
In communication lines, relative by high voltages are applied, including office power, call signals, and test signals.
Moreover, lightning surge induced in a line may unavoidably leak out to the equipment through a protective circuit.
Accordingly, a high breakdown voltage is required for the communication equipment connected to the
communication lines. A photocoupler SSR is suitable to prevent relay drive current from flowing into the lines.
Furthermore, since the polarity of the telephone line is reversed in the exchange operation, the relay contact
inserted in the line should have a bidirectional characteristic.
The OCMOS FET satisfies these conditions and is suitable for these applications. The applicable equipment
includes an office exchange, PBX, key telephone, telephone, and facsimile.
Figure 8 and Figure 9 show D/T MODEM/FAX/TEL APPLICATION.
Figure 10-Figure 12 show SWITCHING
SYSTEM.
Figure 8. D/T MODEM/FAX/TEL APPLICATION
Switching Device: Signal circuit On/Off
PS7141/42-1A/2A
Ring
Telecom.
Network
Dial
pulse
Hook
Switch
Modulator
Demodulator
TIP
line
“ON” “OFF”
Loop
current
detector
Ring signal
detector
Pulse Generator
line
“ON” “OFF”
CPU (NCU controller)
PS2505-1/2
Isolator b/w Signal Circuit and CPU:
Control signal transfer to CPU w/o Noise
19
AN3000
Figure 9. PC CARD/BOARD MODEM
For Space & Device Number Reduction
PS7241-AT5
Modulator
Demodulator
Telecom.
Network
Loop
current
detector
Dial
pulse
line
“ON” “OFF”
VCC
Hook
Switch
Ring signal
detector
Pulse Generator
line
“ON” “OFF”
CPU (NCU controller)
Figure 10. SWITCHING SYSTEM
Example of NRT ( No Ringing Trank ) signal control
Sub-Scriber Line
A/D Trans.
Digital
Trank Line
Cut Over
D/A Trans.
PS7141/42-1A/2A
PS7221-2A
Control Circuit
Trank Line Check Circuit
Sub-Scriber Line
Check Circuit Control Circuit
20
For Space Deduction
Switching Noise Reduction
Hi-Speed Switching
AN3000
Figure 11. SLOW SWITCHING TYPE
66dB Noise Reduction from M.Relay
1 k7
OSC-Scope
Test Circuit
Input
20 mH
Input Signal
S/W OFF
Vp-p = 4 V
f = 10 Hz
Swiching Noise
VSp-p
Mechanical Relay
VSp-p = 350 V
Output Signal
PS7142-1A
VSp-p = 25 V
PS7522-1A
VSp-p = 0.18 V
Figure 12. SWITCHING SYSTEM (LOW S/W NOISE)
Example of NRT ( No Ringing Trank ) signal control
Sub-Scriber Line
A/D Trans.
Digital
Trank Line
Cut Over
D/A Trans.
PS7522-1A/2A
Control Circuit
Trank Line Check Circuit
Sub-Scriber Line
Check Circuit Control Circuit
For Switching Noise Free
Space Reduction
21
AN3000
5.2 INPUT/OUTPUT INTERFACE
The number of process control systems providing feedback control with microcomputers and minicomputers has
been increasing rapidly in the past few years.
In these systems, it is necessary for the microcomputer to control the current for driving the actuator and process
devices using a minute signal and to absorb the difference in signal levels or potentials between the devices.
Moreover, noise from the current turning on/off in the actuator or process device and from external devices may
cause erroneous operation of the microcomputer. Therefore such noise must be cut off by the interface.
Accordingly, the interface relay in these system must provide electrical isolation for the circuits and input/output
separation that shuts out the effect of noise produced mutually by input/output circuits and a transient load.
The opto MOS FET offers complete electrical isolation and insulation between the outputs by photo coupling. It
can control signals and loads over a wide range by input of a minute amount of power. It is therefore suitable for the
above purposes.
Namely, it can be used in a sequence controller, programmable controller (PLC), robot, NC
machine tool, automatic assembling machine, motor/solenoid/valve control.
Figure 13 and Figure 14 show PLC APPLICATION.
22
AN3000
Figure 13. PLC (Input interface block)
PS7141/42/60-2A
PS7221-2A
A1
GND
Ctl1
O1
Ctl2
A2
O2
Senser, etc.
(AC/DC Sig.)
Logic
Processor
A3
Ctl3
Ctl4
O3
A4
O4
COM
VCC
For Space Deduction
Hi On-Resistance
Hi-Speed Switching
Figure 14. PLC (Output interface block)
PS7111/13/22-2A
PS7211-2A
L1
O1
Ctl1
Load
Logic
Processor
O2
Ctl2
GND
L2
For Space Deduction
Low On-Resistance
Hi-Speed Switching
23
AN3000
5.3 LOW-LEVEL/ANALOG SIGNAL CONTROL
In many industrial systems, including production systems, high-speed detection of minute level signals and analog
signals from sensors and transducers and transmission of these signals without distortion are frequently required for
measurement, testing, inspection, monitoring, and control.
A relay to be used for these purposes must offer high-speed operation, no chattering at the time of contact, a linear
characteristic without an offset voltage in the ON state, and low leak current in the OFF state.
The OCMOS FET satisfies these needs. It can be used, for example, in a collector and measuring instrument
(multiplexer) for various kinds of data as well as in testing equipment (IC tester, board tester, etc.).
Figure 15 shows EQUIPMENT SYSTEM.
Figure 15. EQUIPMENT SYSTEM
Analog Multiplexing
Thermal Sensing
VCC
VH
VL
From Control Boad
Voltage Sensing
Amplifier
Buffer
Signal Processor
(ADC, Add, Mpx)
Data
Out
Vee
PS7341/42-1A, PS7360-1A
PS7141/42-2A, PS7160-2A
From Control Boad
For High Load Voltage
Low Leakage Current
Low Offset Voltage
Table 5. OCMOS FET LINE-UP AND APPLICATION
Family No.
2ch
PS7241-ATX
PKG
8 pin SOP
Application
PC card, Telephone, MODEM, FAX
Feature
? 1 OCMOS FET ? 1 Photocoupler
? Small PKG
PS71XX-1A
6 pin DIP
Switching System Equipment
? Long Life
? Smaller than M. Relay
1ch
PS73XX-1A
6 pin DIP
Equipment
? Hi-isolation b/w
Ctl & Switch circuit
PS75XX-1A
6 pin DIP
Switching System
? Slow switching
(Reduction S/W Noise)
PS71XX-2A
8 pin DIP
Switching System, PLC
? Long Life
? Smaller than M. Relay
2ch
PS72XX-2A
8 pin SOP
Switching System, PLC
? Small PKG
PS75XX-2A
8 pin DIP
Switching System
? Slow switching
(Reduction S/W Noise)
24
AN3000
6.
COMPARISON WITH OTHER SWITCHING DEVICES
Table 6 show the comparison OCMOS FET with other switching device.
Table 6. COMPARISON OF FEATURE
OCMOS
M.Relay
Tr.P.C.
Triac P.C.
Signal Linearity
Excellent
Excellent
Fair
Poo r
S/W Power
Small to Midium
Small to Large
Small
Midium to Large
Power Consumption
Excellent
Fair to Good
Excellent
Fair
Number of Operation
Excellent
Depend on S/W Po.
Excellent
Excellent
S/W Noise
Almost Nothing
Exist
Almost Nothing
Almost Nothing
ton/toff
Excellent
Fair
Good
Good
Mechanical Shock
Excellent
Fair
Exce llen t
E xce llen t
Package
LOW Profile SOP
Multi-ch 1 PKG SMD
SOP, SSOP
SOP
OCMOS: Opto-coupled MOS FET,
M.Relay: Mechanical Relay,
Tr.P.C.: Tr.Output Photocoupler,
Triac P.C.:Triac Output Photocoupler
25
AN3000
7.
CAUTIONS FOR USE
•
OCMOS FET Driving Conditions
To assure normal turn-on and turn-off actions of the relay, use the following driving conditions:
min.
(note)
typ.
max.
Forward LED current to
turn on: IF (on)
2 mA
10 mA
20 mA
Forward LED voltage to
turn off: VF (off)
0V
–
1V
Note
For the conditions above, the on-state resistance, load current, turn-on time, and some other
parameters differ from those provided in the standard specifications.
Typical OCMOS FET Driving Circuits
CMOS FET drive
Transistor drive
VCC
VCC
10 k 7 to 100 k 7
R1
R1
VF
VF
VIN
VIN
VOL, VOH
VOL, VOH
How to Determine LED Current-Limiting Resistance Needed to Assure Turn-On Action:
Current limiting resistance: R1 =
VCC - VOL - VF (on)
2 to 20 mA
How to Determine LED Forward Voltage Needed to Assure Turn-Off Action:
Turn-off voltage (forward LED voltage): VF(off) = VCC - VOH < 1 V
•
Untimely Turn-Off Action
A sudden drop in LED drive current can cause untimely turn-off action of the OCMOS FET when it is in on-state.
•
Misoperation due to Impulsive Input Current in Off-State
If a large, impulsive current flows into the OCMOS FET’s control input when it is in off-state, the OCMOS FET
may momentarily misoperate. The relay will return to off-state when the pulse current is removed, however. To
prevent such misoperation, use a pulse current with the product of its peak value (IP) with pulse width (? t) not
exceeding 700 ? 10? (ampere second).
9
•
OCMOS FET’s Electrostatic Capacity
In the off-state, the output OCMOS FETs have a capacitance of several hundred picofarads. Note, therefore, that,
if the load voltage suddenly changes, a transiental charging/ discharging current flows through the load circuit
even when the OCMOS FET output is off-state.
26
AN3000
•
Note on Continuous, High-Speed Switching
Relay’s maximum response speed (frequency) depends on the input current intensity:
e.g. 1000 Hz max. at IF = 10 mA
500 Hz max. at IF = 5 mA
•
Surge Protection
If a reverse surge voltage is expected across the control inputs, use a Zener diode across the input pins to
suppress surge voltages exceeding 5 V. If large spikes exceeding the device’s absolute maximum ratings are
expected at the output from an inductive load, use a C/R snubber or clamping diode in parallel with the load to
suppress such spikes.
Surge Protection for Control Inputs
1
6
2
5
3
4
Spike Protections for Output Circuit
•
1
6
2
5
3
4
1
6
2
5
3
4
Load Connections
PS Series (AC/DC Switching Version)
The following five types of load connections are available.
Choose one or more depending on your application purpose.
AC/DC load
connection
1
2
3
6
5
4
DC load
connection A
1
2
3
6
5
4
DC load
connection A'
1
2
3
6
5
4
IL
DC load
connection B
1
2
3
6
5
4
IL
DC load
connection C
1
2
3
6 IL
5
4
IL
IL
L
IL
L
VL
(AC/DC)
+
VL (DC)
–
L
–
VL (DC)
+
L
–
VL (DC)
+
L
IL + IL
+
VL (DC)
–
27
AN3000
•
Input-Output Short Circuit
If an input pin is shorted to an output pin while the OCMOS FET is active, it may cause permanent damage to the
internal circuitry. Take care never to short one to the other.
•
Handling Precautions
•
Electrostatic damage to OCMOS FET
The output OCMOS FET has a pin-to-pin electrostatic destruction voltage of 2000 V (test condition: 100 pF, 1.5k
ohms). Care must be taken to protect the device from static electricity exceeding this value.
•
Lead strength
Never apply a bend stress of more than 500 grams to any lead as it may cause damage to the OCMOS FET
package and mar the device’s performance and/or reliability.
•
Soldering
Observe the following soldering conditions:
Dip soldering:
Prebake condition: 165 ºC, Not longer than 60 sec.
Soldering condition: 260 ºC, Not longer than 10 sec.
Soldering with soldering iron:
Iron tip temperature: 280 to 300 ºC
Iron wattage: 30 to 60 watts
Soldering duration: Not longer than 5 sec.
•
Post-installation cleaning
Observe the following cleaning requirements for OCMOS FET mounted on a PC board:
Recommended
Cleaning solvent Isopropyl alcohol
Ethylalcohol
28
Not
recommended
Trichloroethane
Toluene
Xylene
Cleaning method
Yes/No
Steam
No
Ultrasonic
Conditional yes
Brushing
No
Dipping in solvent
Yes
AN3000
8.
CONCLUSION
Demand for OCMOS FET featuring high sensitivity, low driving power, extremely low offset voltage in the on-state
and very small leak current in the off-state is steadily increasing.
At the same time, various problems will occur in their circuit design.
We hope this manual will be helpful in solving such problems.
Your source for NEC RF, Microwave, Optoelectronic,
& Fiber Optic Semiconductor Devices.
4590 Patrick Henry Drive, Santa Clara, CA 95054-1817
(408) 919-2500 • FAX (408) 988-0279 • Telex 34/6393
www.cel.com
Information and data presented here is subject to change without notice.
California Eastern Laboratories assumes no responsibility for the use of
any circuits described herein and makes no representations or warranties,
expressed or implied, that such circuits are free from patent infringement.
© California Eastern Laboratories 01/04/2006
29