CEL PS7341C-1A-A

Solid State Relay
OCMOS FET
PS7341C-1A,PS7341CL-1A
CURRENT LIMIT TYPE
6-PIN DIP, HIGH ISOLATION VOLTAGE
1-ch Optical Coupled MOS FET
DESCRIPTION
The PS7341C-1A and PS7341CL-1A are solid state relays containing GaAs LEDs on the light emitting side (input
side) and MOS FETs including current control circuit on the output side. Current control circuit of OCMOS FET
protects this device from thermal breakdown and output circuit.
They are suitable for analog signal control because of their low offset and high linearity.
The PS7341CL-1A has a surface mount type lead.
FEATURES
• Limit current (ILMT = 125 to 250 mA)
• High isolation voltage (BV = 3 750 Vr.m.s.)
• 1 channel type (1 a output)
• Low LED operating current (IF = 2 mA)
• Designed for AC/DC switching line changer
• Small package (6-pin DIP)
• Low offset voltage
• PS7341CL-1A: Surface mount type
• UL approved: File No. E72422 (S)
• BSI approved: No. 8252/8253
• CSA approved: No. CA 101391
APPLICATIONS
• Exchange equipment
• Measurement equipment
• FA/OA equipment
Document No. PN10308EJ01V1DS (1st edition)
(Previous No. P12934EJ5V0DS00)
Date Published February 2003 CP(K)
The mark  shows major revised points.
PS7341C-1A,PS7341CL-1A
PACKAGE DIMENSIONS (in millimeters)
PS7341C-1A
9.25±0.5
TOP VIEW
6
5
4
1
2
3
1. LED Anode
2. LED Cathode
3. NC
4. MOS FET Drain
5. MOS FET Source
6. MOS FET Drain
7.62
3.5±0.3
3.3±0.3 4.15±0.3
6.5±0.5
0.5±0.1
1.34±0.1
0.25 M
0 to 15˚
2.54
PS7341CL-1A
9.25±0.5
TOP VIEW
6
5
4
1
2
3
1. LED Anode
2. LED Cathode
3. NC
4. MOS FET Drain
5. MOS FET Source
6. MOS FET Drain
3.5±0.3
0.10+0.10
–0.05
6.5±0.5
1.34±0.1
0.25 M
2
0.9±0.25
2.54
9.60±0.4
Data Sheet PN10308EJ01V1DS
PS7341C-1A,PS7341CL-1A
ORDERING INFORMATION (Solder Contains Lead)
Part Number
PS7341C-1A
Package
6-pin DIP
Packing Style
Magazine case 50 pcs
PS7341CL-1A
Application Part Number
*1
PS7341C-1A
PS7341CL-1A
PS7341CL-1A-E3
Embossed Tape 1 000 pcs/reel
PS7341CL-1A-E4
*1 For the application of the Safety Standard, following part number should be used.
ORDERING INFORMATION (Pb-Free)
Part Number
PS7341C-1A-A
Package
6-pin DIP
Packing Style
Magazine case 50 pcs
PS7341CL-1A-A
PS7341CL-1A-E3-A
Application Part Number
*1
PS7341C-1A
PS7341CL-1A
Embossed Tape 1 000 pcs/reel
PS7341CL-1A-E4-A
*1 For the application of the Safety Standard, following part number should be used.
Data Sheet PN10308EJ01V1DS
3
PS7341C-1A,PS7341CL-1A
ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise specified)
Diode
Parameter
Symbol
Ratings
Unit
Forward Current (DC)
IF
50
mA
Reverse Voltage
VR
5.0
V
PD
50
mW
IFP
1
A
VL
400
V
IL
120
mA
Power Dissipation
Peak Forward Current
MOS FET
*1
Break Down Voltage
Continuous
Load Current
Connection A
*2
Pulse Load Current
Connection B
120
Connection C
240
*3
ILP
120
mA
PD
560
mW
BV
3 750
Vr.m.s.
Total Power Dissipation
PT
610
mW
Operating Ambient Temperature
TA
−40 to +85
°C
Storage Temperature
Tstg
−40 to +125
°C
(AC/DC Connection)
Power Dissipation
Isolation Voltage
*4
*1 PW = 100 µs, Duty Cycle = 1 %
*2 Conditions: IF ≥ 2 mA. The following types of load connections are available.
Connection A
Connection B
Connection C
1
2
3
1
2
3
1
2
3
1
2
3
6
5
4
6
5
IL
IL
VL (AC/DC)
L
L
+
VL (DC)
–
4
6
5
4
6
5
IL
4
IL
IL
L
L
IL + I L
–
+ VL (DC)
+
VL (DC)
–
*3 PW = 100 ms, 1 shot
*4 AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output
4
Data Sheet PN10308EJ01V1DS
PS7341C-1A,PS7341CL-1A
RECOMMENDED OPERATING CONDITIONS (TA = 25 °C)
Parameter
Symbol
MIN.
TYP.
MAX.
Unit
LED Operating Current
IF
2
10
20
mA
LED Off Voltage
VF
0
0.5
V
ELECTRICAL CHARACTERISTICS (TA = 25 °C)
Parameter
Diode
MOS FET
Coupled
Symbol
Conditions
Forward Voltage
VF
IF = 10 mA
Reverse Current
IR
VR = 5 V
MIN.
Off-state Leakage Current
ILoff
VD = 400 V
Output Capacitance
Cout
VD = 0 V, f = 1 MHz
LED On-state Current
IFon
IL = 120 mA
On-state Resistance
Ron1
IF = 10 mA, IL = 10 mA
Ron2
IF = 10 mA, IL = 120 mA, t ≤ 10 ms
Unit
1.2
1.4
V
5.0
µA
1.0
µA
63
Turn-on Time
ton
IF = 10 mA, VO = 5 V, RL = 2 kΩ,
Turn-off Time
*1
toff
PW ≥ 10 ms
Isolation Resistance
RI-O
VI-O = 1.0 kVDC
Isolation Capacitance
CI-O
V = 0 V, f = 1 MHz
ILMT
IF = 10 mA, t = 5 ms, VL = 6 V
Limit Current
MAX.
0.001
*1
*2
TYP.
10
pF
2.0
mA
27
35
Ω
22
30
0.55
1.0
0.07
1.0
ms
Ω
9
1.1
125
200
pF
250
mA
*1 Test Circuit for Switching Time
IF
Pulse Input
VL
50 %
Input
0
VO = 5 V
Input monitor
90 %
VO monitor
Output
Rin
RL
10 %
ton
toff
*2 N rank : 125 to 250 mA
M rank : 125 to 180 mA
L rank : 170 to 250 mA
Data Sheet PN10308EJ01V1DS
5
PS7341C-1A,PS7341CL-1A
TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise specified)
MAXIMUM LOAD CURRENT vs.
AMBIENT TEMPERTURE
MAXIMUM FORWARD CURRENT vs.
AMBIENT TEMPERTURE
300
Maximum Load Current IL (mA)
Maximum Forward Current IF (mA)
100
80
60
40
20
0
–25
0
25
75 85
50
200
100
0
–25
100
0
25
75 85
50
Ambient Temperature TA (˚C)
Ambient Temperature TA (˚C)
FORWARD VOLTAGE vs.
AMBIENT TEMPERTURE
OUTPUT CAPACITANCE vs.
APPLIED VOLTAGE
1.8
100
200
1.6
1.4
Output Capacitance Cout (pF)
Forward Voltage VF (V)
f = 1 MHz
IF = 50 mA
30 mA
20 mA
10 mA
5 mA
1 mA
1.2
1.0
0.8
–25
0
25
50
75
150
100
50
0
100
20
40
60
80
100
120
Ambient Temperature TA (˚C)
Applied Voltage VD (V)
OFF-STATE LEAKAGE CURRENT vs.
APPLIED VOLTAGE
LOAD CURRENT vs. LOAD VOLTAGE
IF = 10 mA,
t = 5 ms
10–7
Load Current IL (mA)
Off-state Leakage Current ILoff (A)
10–6
TA = 85 ˚C
10–8
25 ˚C
10–9
100
–8.0
–4.0
0
–100
–200
10–10
0
100
200
300
400
500
Applied Voltage VD (V)
6
200
Load Voltage VL (V)
Data Sheet PN10308EJ01V1DS
4.0
8.0
PS7341C-1A,PS7341CL-1A
NORMALIZED ON-STATE RESISTANCE vs.
AMBIENT TEMPERTURE
ON-STATE RESISTANCE DISTRIBUTION
30
Normalized to 1.0
at TA = 25 ˚C,
IF = 10 mA,
IL = 10 mA
2.5
2.0
1.5
1.0
n = 50 pcs,
IF = 10 mA,
IL = 10 mA
25
Number (pcs)
Normalized On-state Resistance Ron
3.0
20
15
10
5
0.5
0.0
–25
0
25
50
75
0
100
27
29
Ambient Temperature TA (˚C)
On-state Resistance Ron (Ω)
TURN-ON TIME vs. FORWARD CURRENT
TURN-OFF TIME vs. FORWARD CURRENT
12
0.30
VO = 5 V
VO = 5 V
0.25
Turn-off Time toff (ms)
Turn-on Time ton (ms)
10
8
6
4
5
10
15
20
25
5
10
15
20
25
Forward Current IF (mA)
Forward Current IF (mA)
TURN-ON TIME DISTRIBUTION
TURN-OFF TIME DISTRIBUTION
30
30
n = 50 pcs,
IF = 10 mA,
VO = 5 V
25
20
15
10
n = 50 pcs,
IF = 10 mA,
VO = 5 V
25
Number (pcs)
Number (pcs)
0.10
0
30
30
20
15
10
5
5
0
0.15
0.05
2
0
0.20
0.5
0.7
0
0.07
0.08
Turn-off Time toff (ms)
Turn-on Time ton (ms)
Data Sheet PN10308EJ01V1DS
7
PS7341C-1A,PS7341CL-1A
NORMALIZED TURN-OFF TIME vs.
AMBIENT TEMPERTURE
NORMALIZED TURN-ON TIME vs.
AMBIENT TEMPERTURE
Normalized to 1.0
at TA = 25 ˚C,
IF = 10 mA,
VO = 5 V
2.5
2.0
1.5
1.0
0.5
0.0
–25
0
25
50
75
100
3.0
Normalized Turn-off Time toff
Normalized Turn-on Time ton
3.0
2.5
2.0
1.5
1.0
0.5
0.0
–25
NORMALIZED LIMIT CURRENT vs.
AMBIENT TEMPERTURE
Normalized Limit Current ILMT
3.0
Normalized to 1.0
at TA = 25 ˚C,
IF = 10 mA,
t = 5 ms, VL = 6 V
2.0
1.5
1.0
0.5
0.0
–25
0
25
50
75
100
Ambient Temperature TA (˚C)
Remark The graphs indicate nominal characteristics.
8
0
25
50
75
Ambient Temperature TA (˚C)
Ambient Temperature TA (˚C)
2.5
Normalized to 1.0
at TA = 25 ˚C,
IF = 10 mA,
VO = 5 V
Data Sheet PN10308EJ01V1DS
100
PS7341C-1A,PS7341CL-1A
TAPING SPECIFICATIONS (in millimeters)
4.5 MAX.
10.3±0.1
7.5±0.1
1.5 +0.1
–0
16.0±0.3
2.0±0.1
4.0±0.1
1.75±0.1
Outline and Dimensions (Tape)
4.0±0.1
10.4±0.1
1.55±0.1
12.0±0.1
0.3
Tape Direction
PS7341CL-1A-E3
PS7341CL-1A-E4
Outline and Dimensions (Reel)
2.0±0.5
R 1.0
21.0±0.8
100±1.0
330±2.0
2.0±0.5
13.0±0.2
17.5±1.0
21.5±1.0
Packing: 1 000 pcs/reel
Data Sheet PN10308EJ01V1DS
15.9 to 19.4
Outer edge of
flange
9
PS7341C-1A,PS7341CL-1A
RECOMMENDED SOLDERING CONDITIONS
(1) Infrared reflow soldering
• Peak reflow temperature
260°C or below (package surface temperature)
• Time of peak reflow temperature
10 seconds or less
• Time of temperature higher than 220°C
60 seconds or less
• Time to preheat temperature from 120 to 180°C
120±30 s
• Number of reflows
Two
• Flux
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Package Surface Temperature T (˚C)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
260˚C MAX.
220˚C
to 60 s
180˚C
120˚C
120±30 s
(preheating)
Time (s)
(2) Wave soldering
• Temperature
260°C or below (molten solder temperature)
• Time
10 seconds or less
• Preheating conditions
120°C or below (package surface temperature)
• Number of times
One
• Flux
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
10
Data Sheet PN10308EJ01V1DS
4590 Patrick Henry Drive
Santa Clara, CA 95054-1817
Telephone: (408) 919-2500
Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant
with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous
Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive
2003/11/EC Restriction on Penta and Octa BDE.
CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates
that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are
exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals.
All devices with these suffixes meet the requirements of the RoHS directive.
This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that
go into its products as of the date of disclosure of this information.
Restricted Substance
per RoHS
Concentration Limit per RoHS
(values are not yet fixed)
Concentration contained
in CEL devices
-A
Not Detected
Lead (Pb)
< 1000 PPM
Mercury
< 1000 PPM
Not Detected
Cadmium
< 100 PPM
Not Detected
Hexavalent Chromium
< 1000 PPM
Not Detected
PBB
< 1000 PPM
Not Detected
PBDE
< 1000 PPM
Not Detected
-AZ
(*)
If you should have any additional questions regarding our devices and compliance to environmental
standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance
content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information
provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better
integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate
information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL
suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for
release.
In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to
customer on an annual basis.
See CEL Terms and Conditions for additional clarification of warranties and liability.