PolySurg ESD Suppressors 0402ESDA-MLP MLP Series ESD Suppressor 1 P L M d e A d D n S e E m 2 0 m s 4 r o n 0 ec o g f i s R e D w e N Features & Benefits • Ultra-low capacitance (0.05pF typ.) ideal for high speed data applications • Provides ESD protection with fast response time (<1ns) allowing equipment to pass IEC 61000-4-2 level 4 test • Single-line, bi-directional device for placement flexibility • Low profile 0402/1005 design for board space savings • Low leakage current (<0.1nA typ.) reduces power consumption RoHS 2002/95/EC Applications • Computers & Peripherals • PDA’s • HDTV Equipment • Digital Still Cameras • USB 2.0 • DVD Players • Digital Camcorders • IEEE 1394 • A/V Equipment • MP3 / Multimedia Players • HDMI • Satellite Radio • Set Top Boxes • DVI • Cell Phones • External Storage • High Speed Ethernet • DSL Modems • Infiniband® Description The PolySurg™ 0402ESDA-MLP ESD Suppressors protect valuable high-speed data circuits from ESD damage without distorting data signals as a result of its ultra-low (0.05pF typical) capacitance. Product Dimensions: mm [inches] • High Speed Data Ports Ordering Information Catalog Number 0402ESDA-MLP7 0402ESDA-MLP8 Packaging 10,000 pieces in paper tape on 7" (178mm) reel 2,500 pieces in paper tape on 7" (178mm) reel Solder Pad Recommendation: mm [inches] 2.20 0.70 0.40 Design Considerations The location in the circuit for the MLP series has to be carefully determined. For better performance, the device should be placed as close to the signal input as possible and ahead of any other component. Due to the high current associated with an ESD event, it is recommended to use a “0-stub” pad design (pad directly on the signal/data line and second pad directly on common ground). BU-SB09615 PolySurg ESD Suppressors 0402ESDA-MLP MLP Series ESD Suppressor Electrical Characteristics Characteristic Notes: 1. Per IEC61000-4-2, Level 4 waveform (8kV direct, 30A) measured 30ns after initiation of pulse. 2. Trigger measurement made using Transmission Line Pulse (TLP) method. 3. Minor shifting in characteristics may be observed over multiple ESD pulses at very rapid rate. Value Rated Voltage 30VDC maximum 1 P L M d e A d D n S e E m 2 0 m s 4 r o n 0 ec o g f i s R e D w e N Clamping Voltage 35V typical 1 300V typical Trigger Voltage2 Capacitance (@1MHz) 0.05pF typ., 0.15pF max. Attenuation Change (0-6GHz) -0.2dB typical Leakage Current (@12VDC) <0.1nA typical ESD Capability IEC61000-4-2 Direct Discharge 8kV typical IEC61000-4-2 Air Discharge 15kV typical ESD Pulse Withstand 1 >1000 typical Environmental Specifications: • Load Humidity: 12VDC per EIA/IS-772 Para. 4.4.2, +85°C, 85% RH for 1000 hours • Thermal Shock: EIA/IS-722 Para 4.6, Air to Air -55°C to +125°C, 5 cycles • Moisture Resistance Test: MIL-STD-202G Method 106G, 10 cycles • Mechanical Shock: EIA/IS-722 Para. 4.9 • Vibration: EIA/IS-722 Para. 4.10 • Resistance to Solvent: EIA/IS-722 Para. 4.11 • Operating & Storage Temperature Range: -55°C to +125°C Soldering Recommendations • Compatible with lead and lead-free solder reflow processes • Peak reflow temperatures and durations: • IR Reflow = 260°C max for 10 sec. max. • Wave Solder = 260°C max. for 10 sec. max. • Recommended IR Reflow Profile: Visit us on the web at: Tel: 1-561-998-4100 North America www.cooperbussmann.com Cooper Electronic Fax: 1-561-241-6640 0402-MLP 3/07 © Cooper Electronic Technologies 2007 BU-SB09615 Technologies 1225 Broken Sound Parkway NW Suite F Boca Raton, FL 334873533 Toll Free: 1-888-4142645 Cooper Bussmann P.O. Box 14460 St. Louis, MO 63178- 4460 Europe Tel: 1-636-394-2877 Cooper Electronic Fax: 1-800-544-2570 Technologies Cooper (UK) Limited Burton-on-the-Wolds Leicestershire • LE12 5TH UK Tel: +44 (0) 1509 882 737 Fax: +44 (0) 1509 882 786 Cooper Electronic Technologies Avda. Santa Eulalia, 290