SPD Telecom 2056 - Cooper Bussmann

Surge Protection Made Simple™ for Telecom Applications
IEC Class II Surge Arresters for 48Vac/60Vdc, 75Vac/100Vdc and 120Vac/200Vdc LV Systems
Description
The Cooper Bussmann® IEC Class II 48Vac/60Vdc, 75Vac/100Vdc and
120Vac/200Vdc one-pole, modular surge arresters feature local,
easy ID™ visual indication and optional remote contact signaling. The
unique module locking system fixes the protection module to the base
part. Modules can be easily replaced without tools by simply
depressing the release buttons. Integrated mechanical coding between
the base and protection module ensures against installing an incorrect
replacement module.
BSPM1A48D60LV(R)
BSPM1A75D100LV(R)
BSPM1A150D200LV(R)
LV System Arresters
The features of these single-pole devices are for use as a single device
or in combination with other devices for AC and DC voltage systems.
Remote Signaling Contact
The three-pole terminal remote signaling contact versions have a
floating changeover contact for use as a break or make contact,
according to circuit concept.
Visual Status Indication
Remote Signal
Contact Available
Module Circuit Diagrams -
Dimensions - mm
Shown with optional remote contact signaling
MOV
Thermal Disconnector
Shown with optional remote contact signaling
BPMA48D60LV
BPMA75D100LV
BPMA150D200LV
www.cooperbussmann.com/surge
0411
BU-SB11303
Page 1 of 2
Data Sheet 2056
Ordering Information
System Voltage
Catalogue Numbers:
(Base + Modules)
48Vac/60Vdc
75Vac/100Vdc
120Vac/200Vdc
Without Remote Signaling
BSPM1A48D60LV
BSPM1A75D100LV
BSPM1A150D200LV
With Remote Signaling
BSPM1A48D60LVR
Replacement Modules
BPMA48D60LV
BSPM1A75D100LVR BSPM1A150D200LVR
BPMA75D100LV
BPMA150D200LV
Specifications
Line System Type
LV
LV
LV
Max continuous operating AC Voltage [Uc]
48Vac
75Vac
150Vac
Max continuous operating DC Voltage [Uc]
60Vdc
100Vdc
200Vdc
Nominal discharge current (8/20 µs) [In]
10kA
10kA
15kA
Max. discharge current (8/20 µs) [Imax]
25kA
40kA
40kA
<_ 0.3 kV
<_ 0.4kV
<_ 0.7kV
Voltage protection level [UP]
Voltage protection level at 5 kA [UP]
Temporary overvoltage (TOV) [UT]
<_ 0.25kV
<_ 0.35kV
<_ 0.55kV
70V / 5 sec.
90V / 5 sec.
175V / 5 sec.
KEMA
KEMA
---
Standards Information*
SPD according to EN 61643-11
Type 2
SPD according to IEC 61643-1
Class II
Response time [tA]
< 25 ns
Max. mains-side overcurrent protection
125 A gL/gG
Short-circuit withstand capability for max.
mains-side overcurrent protection
50kArms
TOV characteristics
Withstand
Operating temperature range [TU]
-40°C to +80°C
Operating state/fault indication
Green (good) / Red (replace)
Number of ports
1
Cross-sectional area (min.)
1.5mm2/14AWG solid/flexible
Cross-sectional area (max.)
35mm2/1AWG stranded/25mm2/2AWG flexible
For mounting on
35mm DIN rail per EN 60715
Enclosure material
Thermoplastic, UL 94V0
Location category
Indoor
Degree of protection
IP20
Capacity
1 Mod., DIN 43880
Product warranty
Five years**
Remote Contact Signaling
Remote Contact Signaling Type
Changeover Contact
AC Switching Capacity (Volts/Amps)
250V/0.5A
DC Switching Capacity (Volts/Amps)
250V/0.1A; 125V/0.2A; 75V/0.5A
Conductor Ratings and Cross-Sectional Area
for Remote Contact Signals Terminals
60/75°C Max. 1.5mm2/14AWG Solid/Flexible
Ordering Information
Order from Catalogue Numbers Above
* Standards information not applicable to DC ratings.
** See Cooper Bussmann SPD Limited Warranty Statement (3A1502) for details at
www.cooperbussmann.com/surge.
Recommended Cooper Bussmann Back-Up Fuses
DIN Fuse Size
NH Fuse Part Number
00
125NHG00B
0
125NHG0B
01
125NHG01B
02
125NHG02B
The only controlled copy of this Data Sheet is the electronic read-only version located on the Cooper Bussmann Network Drive. All other copies of this document are
by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with
design applications. Cooper Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of
any products. Cooper Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has
been selected, it should be tested by the user in all possible applications.
© 2 0 1 1 C o o p e r B u ssmann
w w w. c o o p e r b u s s m ann.com
0411
BU-SB11303
Page 2 of 2
Data Sheet 2056