Now, Match Your Critical UPS Loads to the Right Level of Protection! The Quik-Spec™ Coordination Panelboard provides 18 different branch fuse amp ratings to closely match your electrical loads for maximum protection. Ideal for Critical, Sensitive Loads • Closely match fuse ampacity to UPS loads including alarm and protection systems, sensors and monitors, distributed control systems, PLCs and more. • Closer fuse sizing and faster opening speeds limit voltage depression during faults and, reduce the probability of losing voltage-sensitive loads, or the entire UPS, unnecessarily. Particularly branch circuits in the 1-10 amp range. More Ampacity Selections • The CCPB fused branch disconnect uses the Low-Peak CUBEFuse to permit closely matching amp rating to load so overcurrent events are interrupted at the level that protects your equipment, not just your conductors. • 1 to 100 amp fuse ratings† to closely match loads. • Circuit breakers do not provide the same availability of amp ratings less than 20A! A Greater Value with Flexible Configurations – Up to 600Vac/400 Amp/200kA SCCR, or 125Vdc/400 Amp/100kA SCCR* • 30, 60, 100, 200, 225 and 400A main ratings. • 125Vdc rating ideal for utility and UPS circuits. • Fused or non-fused main disconnect switch, or MLO (Main Lug Only). Increased Safety & Reliability • Easy to achieve selective coordination in a fused distribution system. Simply follow published ampacity ratio tables. No expensive and time consuming studies required as with circuit breakers. • Fuse interlock on Compact Circuit Protector (CCPB) base prevents removing fuse while branch disconnect is energized. • CCPB rejection feature matches standard fuse amp rating to standard copper conductor ampacities. • Lockout/Tagout provision eases OSHA compliance. • Lock-On provision helps meet requirements for emergency circuits. Custom Enclosures Available • Class I, Div. 2 housing features positive pressurization (with regulated protective gas supply) for application in hazardous locations. * 125Vdc rating applicable to 40 amp or less CCPBs on MLO panels only. ** When used in a fully fused distribution system. † 70A, 90A and 100A CCPB branch disconnect available for a bus rating 225A or higher. Key QSCP Panelboard Features QSCP Panelboard Specifications • Select the amp rating sized for the load: 1, 3, 6, 10, 15, 17 1/2, 20, 25, 30, 35, 40, 45, 50, 60, 70, 80, 90 and 100A. Mains: • UL 98 branch circuit disconnect-rated CUBEFuse® Compact Circuit Protector Base feature ampacity-rejection breaks at 15A, 20A, 30A, 40A, 50A, 60A, 70A†, 90A† and 100A† • Branch circuit protection by UL Class CF finger-safe Low-Peak® CUBEFuse® (Class J fuse electrical performance) fuses†† • Service fuses in branch circuits without opening panel trim (standard enclosures) • Local open fuse indication on branch circuit device and optional indicating CUBEFuse Assembly SCCRs: • • • • Voltage Ratings: • Panel Ampacities: Branch Circuits: • • • • • • • • Panel: • Fuse interlock prevents removal while energized • Lockout/Tagout provision • Lock-On provision • High SCCR - up to 200kA † Available for a bus rating 225A or higher. †† See CUBEFuse Data Sheet 9000 online at www.cooperbussmann.com/quikspec for details. Through-Lugs &: Loadside Disconnect Neutrals: Grounds: Enclosure Sizes: • • • • • • Spare Fuses: • MLO (Main Lug Only) Fused Disconnect Switch Non-fused Disconnect Switch 200kA, 100kA or 50kA @ 600Vac, 100kA or 20kA@125Vdc* Applicable on any 600Vac or less, or 125Vdc** or less systems 400A, 225A, 200A, 100A, 60A or 30A Circuits; Up to 18, 30 and 42 Amps; Up to 100A Type; 1-, 2- and 3-Pole Feed; Top & Bottom*** Mounting; Surface or Flush**** Door/Trim; Regular or Door-in-Door**** NEMA Ratings; 1, 3R, Class 1 Div 2. Other ratings available. Consult factory. Feed-Through Sub-Feed Fused loadside disconnect (225 & 400A panels only) 200A and 400A Unbonded and Bonded Non-Isolated or Isolated Standard size panelboard (20” W x 5 fl D x from 33 to 70.5 inches H)* Six-fuse spare fuse compartment * Depending on configuration ** 125Vdc rating applicable to 40 amp or less CCPBs on MLO panels only. *** Top feed not available on NEMA 3R enclosure **** Flush mount and Door-in-Door not available with NEMA 3R enclosure Quik-Ship - 10 Business Day Shipment • All configurations of the standard enclosure Quik-Spec Coordination Panelboard are available for shipment within 10 business days of order. Consult factory for details. Optional Class I, Div. 2 housings feature a pressure regulator and pressure switch designed to meet or exceed NEC®, NFPA 70, NFPA 496 and IEC 60079-02 requirements. For electrical performance, see Data Sheet 1160 and Application Note 3145 online at www.cooperbussmann.com/quikspec. ©2011 Cooper Bussmann St. Louis, MO 63178 www.cooperbussmann.com Reorder #3154 0211 PDF Only