Ultra-Low Phase Noise Voltage Controlled Crystal Oscillator Part Number CVHD-952 9×14 mm SMD, 3.3V, HCMOS Frequency Range: Frequency Pulling: Temperature Range: (Option X): Storage: Input Voltage: Control Voltage: Input Current: Output: Symmetry: Rise/Fall Time: Linearity: Logic: Load: Output current: Disable Time: Enable Time: Jitter: 12 kHz to 80 MHz Phase Noise (Typical): Sub-Harmonic @ Fo/2: Aging: 1 Hz: 10 Hz: 100 Hz: 1 kHz: 10 kHz: 100 kHz: 131.000 MHz to 200.000 MHz ±20 ppm APR Min 0°C to 70°C (standard) -40°C to 85°C -45°C to 90°C 3.3 V ±0.3 V 1.65 V ±1.65 V 25 mA Typical, 35 mA Max HCMOS 45/55% Max @ 50% Vdd 2ns Max @ 20% to 80% Vdd ±10% Max "0" = 10% Vdd Max "1" = 90% Vdd Min 15 pF ±24 mA Max 200 ns Max 200 ns Max 0.5 psec Typical, 1 psec RMS Max -40 dBc/Hz -70 dBc/Hz -100 dBc/Hz -130 dBc/Hz -148 dBc/Hz -150 dBc/Hz 0.360 (9.14) Applications: HD Video Broadcast Equipment PIN Function 1 2 3 4 5 6 Control Volt E/D GND OUT No Connect Vdd -35 dBc Max <3 ppm 1st year, <1 ppm every year thereafter 0.100 (2.54) 0.560 (14.2) CRYSTEK CVHD-952 Frequency Date Code Available Frequencies (MHz): 148.351600 148.500 0.560 (14.2) 0.210 (5.3) SUGGESTED PAD LAYOUT 0.040 (1.01) via to ground 0.01µF 1 6 2 5 3 4 0.070 (1.77) Mechanical: Shock: Solderability: Vibration: Solvent Resistance: Resistance to Soldering Heat: 0.200 (5.08) 0.280 (7.11) 0.090 (2.28) 0.200 (5.08) RECOMMENDED REFLOW SOLDERING PROFILE 900034 (See App Note listed on website) http://www.crystek.com/specification/reflow/900034.pdf 0.050 (1.27) MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2003 MIL-STD-883, Method 2007, Condition A MIL-STD-202, Method 215 MIL-STD-202, Method 210, Condition I or J Environmental: Thermal Shock: MIL-STD-883, Method 1011, Condition A Moisture Resistance: MIL-STD-883, Method 1004 ** APR= Absolute Pulling Range inclusive of all conditions C CRYSTEK CORPORATION Rev: D Date: 29-Sep-2015 Page 1 of 1 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com