High Performance HCMOS VCXO CVHD-930 Model 9×14 mm SMD, 3.3V, HCMOS Frequency Range: 10 MHz to 49.152 MHz Temperature Range: (Option X) 0°C to 70°C -40°C to 85°C Storage: -45°C to 90°C Input Voltage: Control Voltage: Settability At Nominal: Input Current: 3.3V ±0.3V 1.65V ±1.65V 1.65V ±0.25V 25mA Max Output: Symmetry: Rise/Fall Time: Pullability APR: Linearity: Load: Logic "1" Level: Logic "0" Level: Start-up time: HCMOS 47.5/52.5 Typical, 45/55% Max 5ns Max @ 20% to 80% Vcc ±50ppm Min ±10% Max 30pF Max 90% Vdd Max 10% Vdd Min 2ms Typical, 5ms Max Modulation BW: Sub-harmonics: >10kHz @ -3dB none Period Jitter: Phase Jitter: <5ps RMS (1-sigma) Max <1ps RMS (1-sigma) Max <1ps RMS (1-sigma) Max (20,000 periods) 12kHz~20MHz 50kHz~80MHz Phase Noise Typical: 10Hz 100Hz 1kHz 10kHz 100kHz -80 dBc/Hz -110 dBc/Hz -140 dBc/Hz -152 dBc/Hz -155 dBc/Hz Aging: <3ppm 1st year, <1ppm every year thereafter Applications: Broadband Networks SONET/SDH/DWD ATM Network/switch Telecom Designed using FR5 PCB & Fundamental AT crystal technology to provide a Low Noise, Low Jitter Voltage Controlled Crystal Oscillator solution at a competitive price. Specifications subject to change without notice. C CRYSTEK CORPORATION TD-040101 Rev. J Page 1 of 2 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com High Performance HCMOS VCXO CVHD-930 Model 9×14 mm SMD, 3.3V, HCMOS 0.560 (14.2) Crystek Part Number Guide CVHD - 930 X - 49.152 #1 #1 #2 #3 #4 #2 #3 CRYSTEK P/N Frequency Date Code 0.360 (9.14) #4 0.040 (1.01) Crystek 9×14 SMD HCMOS VCXO Model 930 = High Performance 3.3V Temp. Range: Blank = 0/70°C, X = -40/85°C Frequency in MHz: 3 or 6 decimal places 0.560 (14.2) 1 0.210 (5.3) Example: CVHD-930X-49.152 = 3.3V, -40/85°C, 49.152 MHz 2 4 0.070 (1.77) 3 0.200 (5.08) RECOMMENDED REFLOW SOLDERING PROFILE 900034 (See App Note listed on website) http://www.crystek.com/specification/reflow/900034.pdf PIN Function 1 2 3 4 Vcont GND OUT VDD SUGGESTED PAD LAYOUT 0.050 (1.27) 0.090 (2.28) 0.280 (7.11) 0.200 (5.08) Mechanical: Shock: Solderability: Vibration: Solvent Resistance: Resistance to Soldering Heat: MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2003 MIL-STD-883, Method 2007, Condition A MIL-STD-202, Method 215 MIL-STD-202, Method 210, Condition I or J Environmental: Thermal Shock: Moisture Resistance: MIL-STD-883, Method 1011, Condition A MIL-STD-883, Method 1004 Packaging: Tape/Reel: 100ea, 250ea, 500ea 24mm Tape Specifications subject to change without notice. C CRYSTEK CORPORATION TD-040101 Rev. J Page 2 of 2 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com