ROHM EMD9T2R

Digital Transistor (Dual Digital Transistors for Inverter Drive)
EMD9 / UMD9N / IMD9A
Features
1) DTA114Y and DTC114Y transistors are built-in a EMT
or UMT or SMT package.
Dimensions (Unit : mm)
0.22
Inner circuit
(5)
R1
(6)
R2
Each lead has same dimensions
DTr1
DTr1
ROHM : EMT6
DTr2
Abbreviated symbol : D9
R1
R1=10kΩ
R2=47kΩ
(6)
Package, marking, and packaging specifications
EMD9
UMD9N
IMD9A
EMT6
D9
T2R
UMT6
D9
TR
SMT6
D9
T108
0.15
1.25
Type
Package
Marking
Code
Basic ordering unit (pieces)
8000
3000
3000
0.1Min.
Junction temperature
Storage temperature
V
V
mA
IC (Max.)
100
Pd
150(TOTAL)
300(TOTAL)
Tj
150
mA
mW
mW
°C
Tstg
−55 to +150
°C
2.0
1.3
0.7
Abbreviated symbol : D9
IMD9A
∗1
∗2
(6)
Unit
50
−6 to +40
70
1.6
120mW per element must not be exceeded. PNP type negative symbols have been omitted.
0.8
0to0.1
0.3to0.6
1.1
2.8
200mW per element must not be exceeded. PNP type negative symbols have been omitted.
0.15
∗1
∗2
Limits
VCC
VIN
IO
(5)
EMD9, UMD9N
IMD9A
Symbol
(4)
Power dissipation
Each lead has same dimensions
ROHM : UMT6
EIAJ : SC-88
0.3
Parameter
0.9
2.1
Absolute maximum ratings (Ta=25C)
Supply voltage
Input voltage
Output current
Collector current
(3)
(5)
0.2
(4)
UMD9N
0.65
(1)
(2)
(2)
(1)
(3)
0.65
R1=10kΩ
R2=47kΩ
0.95 0.95
1.9
2.9
(6)
0to0.1
R2
R1
(5)
(1)
R2
(4)
(2)
DTr2
(3)
R2
(1)
0.5
(4)
R1
(1)
(2)
1.2
1.6
0.13
IMD9A
(3)
(2)
(5)
(6)
EMD9 / UMD9N
(3)
(4)
0.5 0.5
1.0
1.6
EMD9
Each lead has same dimensions
ROHM : SMT6
EIAJ : SC-74
Abbreviated symbol : D9
Electrical characteristics (Ta=25C)
Symbol
Min.
Typ.
Max.
Input voltage
Parameter
VI(off)
VI(on)
Output voltage
VO(on)
Input current
Output current
II
−
1.4
−
−
−
−
0.1
−
−
68
−
−
−
250
0.3
−
0.3
0.88
0.5
−
−
mA
mA
−
MHz
DC current gain
Transition frequency ∗
Input resistance
Resistance ratio
IO(off)
GI
fT
Unit
V
V
Conditions
VCC=5V , IO=100μA
VO=0.3V , IO=1mA
IO=5mA , II=0.25mA
VI=5V
VCC=50V , VI=0V
IO=5mA , VO=5V
VCE=10V , IE= −5mA , f=100MHz
R1
7
10
13
kW
−
R2/R1
3.7
4.7
5.7
−
−
PNP type negative symbols have been omitted.
∗ Characteristics of built-in transistor.
www.rohm.com
c 2010 ROHM Co., Ltd. All rights reserved.
○
1/3
2010.01 - Rev.D
EMD9 / UMD9N / IMD9A
−100
OUTPUT CURRENT : Io (A)
−20
−10
−5
−2
Ta=−40°C
25°C
100°C
−1
−500m
−200m
−100m
−100μ −200μ −500μ −1m −2m
−5m −10m −20m −50m −100m
OUTPUT CURRENT : IO (A)
Fig.1 Input voltage vs. output current
(ON characteristics)
−1
1k
VCC=−5V
500
−2m
−1m
−500μ
Ta=100°C
25°C
−40°C
−200μ
−100μ
−50μ
−20μ
−10μ
−5μ
−2μ
−1μ
0
200
VO=−5V
Ta=100°C
25°C
−40°C
100
50
20
10
5
2
−0.5
−1.0
−1.5
−2.0
−2.5
−3.0
INPUT VOLTAGE : VI(off) (V)
Fig.2 Output current vs. input voltage
(OFF characteristics)
1
−100μ −200μ −500μ −1m −2m
−5m −10m −20m −50m−100m
OUTPUT CURRENT : IO (A)
Fig.3 DC current gain vs. output
current
lO/lI=20
−500m
OUTPUT VOLTAGE : VO(on) (V)
−10m
−5m
VO=−0.3V
−50
INPUT VOLTAGE : VI(on) (V)
DTr1 (DTC114Y)
DC CURRENT GAIN : GI
Electrical characteristics curves
Data Sheet
Ta=100°C
25°C
−40°C
−200m
−100m
−50m
−20m
−10m
−5m
−2m
−1m
−100μ −200μ −500μ −1m −2m
−5m −10m −20m −50m −100m
OUTPUT CURRENT : IO (A)
Fig.4 Output voltage vs. output
current
www.rohm.com
c 2010 ROHM Co., Ltd. All rights reserved.
○
2/3
2010.01 - Rev.D
EMD9 / UMD9N / IMD9A
100
DTr2 (DTA114Y)
10m
5m
VO=0.3V
OUTPUT CURRENT : Io (A)
INPUT VOLTAGE : VI(on) (V)
50
20
10
Ta=−40°C
25°C
100°C
5
2
1
500m
200m
100m
100μ 200μ
500μ 1m
2m
5m 10m 20m
50m 100m
500
Fig.1 Input voltage vs. output current
(ON characteristics)
VO=5V
2m
1m
500μ
Ta=100°C
25°C
−40°C
200μ
100μ
50μ
20μ
10μ
5μ
2μ
1μ
0
Ta=100°C
25°C
−40°C
200
100
50
20
10
5
2
0.5
1.0
1.5
2.0
2.5
3.0
INPUT VOLTAGE : VI(off) (V)
OUTPUT CURRENT : IO (A)
1
1k
VCC=5V
DC CURRENT GAIN : GI
Electrical characteristics curves
Data Sheet
Fig.2 Output current vs. input voltage
(OFF characteristics)
1
100μ 200μ
500μ 1m
2m
5m 10m 20m
50m 100m
OUTPUT CURRENT : IO (A)
Fig.3 DC current gain vs. output
current
lO/lI=20
OUTPUT VOLTAGE : VO(on) (V)
500m
200m
Ta=100°C
25°C
−40°C
100m
50m
20m
10m
5m
2m
1m
100μ 200μ
500μ 1m
2m
5m 10m 20m
50m 100m
OUTPUT CURRENT : IO (A)
Fig.4 Output voltage vs. output
current
www.rohm.com
c 2010 ROHM Co., Ltd. All rights reserved.
○
3/3
2010.01 - Rev.D
Notice
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specified in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, fire or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any
of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
R1010A