BeRex BCT05CV 5-4000 MHz Wideband Drive Amplifier Device Features • 43.5 dBm Output IP3 at 9dBm/tone • 22 dB Gain at 900MHz • 24 dBm P1dB at 2450 MHz • Highly Reliable InGaP/GaAs HBT Technology • Application: commercial wireless system Target Device Performance (Ta = 25°C) Symbols Parameters Test Conditions Gain S11 S22 OIP3 P1dB IS-95 CH Power @-45dBc ACPR NF Ic Vc Rth 900MHz 1900MHz 2450MHz 900MHz 1900MHz 2450MHz 900MHz 1900MHz 2450MHz 900MHz 1900MHz 2450MHz 900MHz 1900MHz 2450MHz 900MHz 1900MHz 2450MHz 900MHz 1900MHz 2450MHz Vc = 5.0V Min Typ Max Unit 20.7 16.6 14.3 21.7 17.6 15.3 -18.6 -15.3 -17.2 -15.1 -39.7 -15.3 43.6 42.3 40.7 24.0 23.8 24.2 16.0 16.0 16.5 4.4 4.2 4.3 87 5.0 50 22.7 18.6 16.3 dB 41.6 41.3 39.7 23.0 22.8 23.2 77 Thermal Resistance Test conditions unless otherwise noted. 1. Device performance is measured on BeRex evaluation board at 25C, 50 ohm system 2. OIP3 is measured on an eval-board with two tones separated by 1 MHz. Absolute Maximum Ratings Parameter Rating Operating Case temperature Storage Temperature Supply Voltage Max. Device Current Input RF Power -40 to +85°C -55 to +155°C 6.5V 180mA 23dBm Operation of this device above any of these parameters may result in permanent damage. http: //www.berex.com dB dB dBm dBm dBm dB 97 mA V °C/W BeRex BCT05CV Typical Device Data S-parameters (Vc=5V, Ic=87mA, T=25°C) S-parameter test circuit Chip attachment on PF083 http: //www.berex.com BeRex BCT05CV Generic PF083 Evaluation Board (31mil thick FR4) I-V characteristics S-Parameter (5V/87mA) Freq [MHz] S11 [Mag] S11 [Ang] S12 [Mag] S12 [Ang] S21 [Mag] S21 [Ang] S22 [Mag] S22 [Ang] 100 500 1000 1500 2000 2500 3000 3500 4000 0.465 0.645 0.690 0.748 0.778 0.748 0.841 0.934 0.899 -48.427 -128.468 -171.254 159.059 141.185 138.006 142.443 139.011 132.888 0.010 0.034 0.045 0.051 0.053 0.055 0.059 0.056 0.067 85.919 7.967 -48.963 -102.372 -144.526 172.951 130.929 84.638 40.623 3.827 9.952 8.810 6.588 4.794 3.889 3.046 2.464 2.301 -99.799 141.528 48.139 -24.785 -81.488 -135.293 176.260 127.419 75.436 0.929 0.602 0.315 0.376 0.455 0.418 0.541 0.638 0.591 -153.159 144.177 148.430 144.485 138.017 142.841 154.681 149.921 143.868 * Note : S-parameter includes 1 mil thick and 16-mil long Au wire Application Circuit: 900 MHz Schematic Diagram http: //www.berex.com BOM Tolerance C1 100pF ± 5% C2 6.8pF ±5% C3 100pF ± 5% C4 100pF ± 5% C5 1000pF ± 10% C6 10uF ±10% L1 2nH ±5% L2 12nH ± 5% BeRex BCT05CV Typical Performance http: //www.berex.com BeRex BCT05CV Application Circuit: 1900 MHz Schematic Diagram Typical Performance http: //www.berex.com BOM Tolerance C1 100pF ± 5% C2 2pF ±5% C3 1.2pF ±5% C4 C5 C6 100pF 100pF 1000pF ± 5% ± 5% ± 10% C7 L1 L2 10uF 1.8nH 6.8nH ±10% ±5% ± 5% BeRex BCT05CV Application Circuit: 2450MHz Schematic Diagram Typical Performance http: //www.berex.com BOM Tolerance C1 1.5pF ±5% C2 1.8pF ±5% C3 0.8pF ±5% C4 C5 C6 100pF 100pF 1000pF ± 5% ± 5% ± 10% C7 L1 L2 10uF 1nH 6.8nH ± 10% ±5% ±5% BeRex BCT05CV Die Outline NOTES: 1) DIE THICKNESS 100um 2) BONDPAD METAL THICKNESS 2.8um 3) BACKSIDE METAL Au, 5um 4) DEVICE IS GROUNDED THROUGH VIA HOLES http: //www.berex.com BeRex BCT05CV ESD Rating Class 1B Passes <1000V Human Body Model (HBM) JEDEC Standard JESD22-A114B ESD Rating Value Test Standard NATO CAGE code: 2 N 9 6 F NOTICE BeRex Corporation reserves the right to make changes of product specification or to discontinue product at any time without notice. http: //www.berex.com