Power Inductors - Shielded CTIHLP2012CF Series From .33 µH to 10 µH www.ctparts.com SPECIFICATIONS Parts are available in ±20% inductance tolerance only. *Irms: Will cause the coil temp. rise approximately DT of 40°C. (Keep 1 Min) **Isat: Will cause L0 to drop approximately 20%. (Keep quickly) Part Inductance Number (µH) CTIHLP2012CF-R33M 0.33 CTIHLP2012CF-R47M 0.47 CTIHLP2012CF-R68M 0.68 L Test Freq. (KHz) 100 100 100 DCR Typ. (mΩ) 4.3 6.4 10.0 DCR Max. (mΩ) 5.0 7.4 12.0 *Irms Typ. (A) 14.0 12.0 8.5 **Isat Typ. (A) 18.0 16.0 14.0 SRF Typ. (MHz) 86 80 74 CTIHLP2012CF-1R0M CTIHLP2012CF-1R2M CTIHLP2012CF-1R5M CTIHLP2012CF-2R2M CTIHLP2012CF-3R3M CTIHLP2012CF-4R7M CTIHLP2012CF-5R6M CTIHLP2012CF-6R8M 1.00 1.20 1.50 2.20 3.30 4.70 5.60 6.80 100 100 100 100 100 100 100 100 13.0 14.0 16.0 25.0 32.0 50.0 55.0 68.0 14.0 16.0 25.0 35.0 38.0 53.0 63.0 76.2 7.0 6.5 6.0 5.5 5.0 4.6 4.25 4.0 11.0 11.0 10.0 9.0 8.0 6.0 4.5 4.3 70 65 60 43 30 23 20 18 CTIHLP2012CF-100M 10.0 100 110.0 128.0 2.75 3.5 16 PHYSICAL DIMENSIONS Size A B mm inches 5.5±0.3 0.22±0.012 C D 5.2±0.2 2.8±0.2 1.1±0.3 0.20±0.008 0.11±0.008 0.043±0.012 A C E 1.5±0.2 0.06±0.008 D Not Shown at Actual Size E B Marking: Inductance Code PAD LAYOUT Unit: mm 6.0 2.2 1.8 Description: SMD (shielded) power inductor. Applications: Notebook, Desktop, Server applications, Low profile, high current power supplies, battery powered devices, DC/DC converter for Field Programmable Gate Array (FPGA). Operating Temperature: -40°C to +125°C (The part temperature (ambient + temp. rise) should not exceed 125°C under worst case operating conditions. Circuit design, component placement, PWB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be verified in the end application) Inductance Tolerance: ±20% Testing: Inductance is tested on an HP4285A at 100KHz, 1.0V Packaging: Tape & Reel. Marking: Parts are marked with inductance code. Miscellaneous: RoHS Compliant. Additional Information: Additional electrical & physical information available upon request. Samples available. See website for ordering information. 100 100 CHARACTERISTICS Manufacturer of Passive Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2010 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice REV 12.07.10