ctihlp6826af

Power Inductors - Shielded
CTIHLP6826AF
Series
From 2.2 µH to 100 µH
www.ctparts.com
SPECIFICATIONS
Parts are available in ±20% inductance tolerance only.
Irms
Isat 1
Isat 2 Part
Inductance
(A)
(A)
(A)
Number
(µH)
Typ.
Typ.
Typ.
CTIHLP6826AF-2R2M
2.20
43.5
47
62
CTIHLP6826AF-3R3M
3.30
28
45
54
CTIHLP6826AF-4R7M
4.70
25
41
50
CTIHLP6826AF-5R6M
5.60
21
40
45
CTIHLP6826AF-6R8M
6.80
19
32
39
CTIHLP6826AF-8R2M
8.20
18
25
31
DCR
(mW)
Typ.
2.4
3.5
4.8
5.8
8.4
9.6
DCR
(mW)
Max.
2.7
3.9
5.5
7.05
9.2
10.8
CTIHLP6826AF-100M
CTIHLP6826AF-150M
CTIHLP6826AF-220M
CTIHLP6826AF-330M
CTIHLP6826AF-470M
10.0
15.0
22.0
33.0
47.0
16.5
12.5
12
10.7
8.7
24
23
18
15
9.5
29
27
23
20
16
11.8
17.8
25.1
38.0
48.0
13.0
20.5
26.5
44.0
55.0
CTIHLP6826AF-101M
100
5.3
6.5
12
102.0
118
F
G
PHYSICAL DIMENSIONS
Size mm
inches
A
B
C
B
CHARACTERISTICS
Description: SMD (shielded) Power Inductor.
Applications: Notebook, Desktop, Server applications, Low
profile, high current power supplies, battery powered devices,
DC/DC converter for Field Programmable Gate Array (FPGA).
Operating Temperature: -40°C to +125°C (The part temperature
(ambient + temp. rise) should not exceed 125°C under worst case
operating conditions. Circuit design, component placement, PWB
trace size and thickness, airflow and other cooling provisions all
affect the part temperature. Part temperature should be verified in
the end application)
Inductance Tolerance: ±20%
Irms: Will cause the coil temperature rise approximately DT of
40°C (keep 1 Min.)
Isat 1: Will cause L0 to drop 20% typical. (keep quickly)
Isat 2: Will cause L0 to drop 30% typical. (keep quickly)
Testing: Inductance is tested on an HP4285A at 100KHz, 1.0V
Packaging: Tape & Reel.
Marking: Parts are marked with inductance code.
Miscellaneous: RoHS Compliant.
Additional Information: Additional electrical & physical
information available upon request.
Samples available. See website for ordering information.
E
Max.
17.3±0.4
16.9±0.3
6.7±0.3
16.9±0.3
0.25
2.1±0.3
11.9±0.3
0.69±0.016
0.66±0.012
0.26±0.012
0.66±0.012
0.01
0.08±0.012
0.47±0.012
A
D
Not Shown at Actual Size
D
C
XXX
YYWW
F
G
E
Marking
PAD LAYOUT
Unit: mm
18.5
12.2
Manufacturer of Passive Components
800-684-5322 Inside US
949-453-1811 Outside US
Copyright © 2012 by CT Magnetics, DBA Central Technologies. All rights reserved.
CT Magnetics reserves the right to make improvements or change specifications without notice
12.5
REV 11.19.12