Power Inductors - Shielded CTIHLP5026F Series From 2.2 µH to 22 µH www.ctparts.com SPECIFICATIONS Please specify tolerance code when ordering. CTIHLP5026F-2R2_ M = ±20%, N = ±30% *Irms DC current (A) that will cause an approximate DT of 40°C. **Isat DC current (A) that will cause L0 to drop approximately 20%. L Test DCR *Irms Part Inductance Freq. Max. Typ. Number (µH) (KHz) (mΩ) (A) CTIHLP5026F-2R2_ 2.2 200 4.2 20.0 CTIHLP5026F-3R3_ 3.3 200 6.8 15.0 CTIHLP5026F-4R7_ 4.7 200 11.2 13.5 CTIHLP5026F-5R6_ 5.6 200 11.5 12.0 CTIHLP5026F-6R8_ 6.8 200 14.9 11.5 CTIHLP5026F-8R2_ 8.2 200 16.6 10.5 CTIHLP5026F-100_ CTIHLP5026F-220_ 10 22 200 200 18.5 45.0 **Isat Typ. (A) 33.0 29.0 25.0 24.0 16.5 16.0 10.0 5.0 15.5 8.0 PHYSICAL DIMENSIONS Size A mm inches B B D E Max. F Max. 13.8 12.9 6.7 4.7±0.3 8.4 2.4 0.54 0.51 0.26 0.18±0.012 0.33 0.09 A Not Shown at Actual Size C Max. E C 2R2 Ref. Ref. F D CHARACTERISTICS Marking: Inductance Code PAD LAYOUT Unit: mm 13.8 5.15 Description: SMD (shielded) power inductor. Applications: PDA, Notebook, Desktop, Server applications, Low profile, high current power supplies, battery powered devices, DC/DC converter for Field Programmable Gate Array (FPGA). Operating Temperature: -55°C to +125°C (The part temperature (ambient + temp. rise) should not exceed 125°C under worst case operating conditions. Circuit design, component placement, PWB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be verified in the end application) Inductance Tolerance: ±20%, ±30% Testing: Inductance is tested on an HP4285A at 200KHz, 0.25V, 0A. Packaging: Tape & Reel. Marking: Parts are marked with inductance code. Miscellaneous: RoHS Compliant. Additional Information: Additional electrical & physical information available upon request. Samples available. See website for ordering information. 7.6 Manufacturer of Passive Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2012 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice REV 07.06.12