TH09/2479 TH97/2478 www.eicsemi.com RL3A IATF 0113686 SGS TH07/1033 ULTRA FAST RECOVERY RECTIFIER DIODE PRV : 600 Volts Io : 2.0 Amperes DO - 201AD FEATURES : * * * * * * * * Glass passivated junction chip High current capability High surge current capability High reliability Low reverse current Low forward voltage drop Fast switching for high efficiency Pb / RoHS Free 1.00 (25.4) MIN. 0.208 (5.30) 0.188 (4.80) 0.374 (9.50) 0.283 (7.20) MECHANICAL DATA : 1.00 (25.4) MIN. 0.050 (1.28) 0.048 (1.22) * Case : DO-201AD Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, Method 208 guaranteed * Polarity : Color band denotes cathode end * Mounting position : Any * Weight : 1.21 grams Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. RATING SYMBOL VALUE UNIT Maximum Peak Reverse Voltage VRM 600 V Maximum Peak Reverse Surge Voltage VRSM 600 V Maximum Average Forward Current IF(AV) 2.0 A IFSM 60 A VF 1.7 V Maximum Peak Forward Surge Current ( 50 Hz, Half-cycle, Sine wave, Single Shot ) Maximum Forward Voltage at IF = 3.0 A Maximum Reverse Current at VR = VRM Ta = 25 °C IR 50 μA Maximum Reverse Current at VR = VRM Tj = 150 °C IR(H) 200 μA Maximum Reverse Recovery Time (Note 1) Trr 50 μs Junction Temperature Range TJ - 40 to + 150 °C Storage Temperature Range TSTG - 40 to + 150 °C Note: ( 1 ) Reverse Recovery Test Conditions : IF = 100 mA, IRP = 100 mA. Page 1 of 2 Rev. 04: October 8, 2012 TH09/2479 TH97/2478 www.eicsemi.com IATF 0113686 SGS TH07/1033 RATING AND CHARACTERISTIC CURVES ( RL3A ) FIG.1 - REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 100 μF 20μS 200μS 100 mA IF 0.1 IRP 100 mA IRP 10 Ω specimen Trr NOTE : IF = IRP = 100 mA TO 10 mA 2.5 FIG.3 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 60 20 x 20 x 1tCu 2.0 5mm PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD OUTPUT CURRENT, AMPERES FIG.2 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT 5mm 1.5 With Heatsink 1.0 0.5 0 0 25 50 60 75 100 125 150 50 40 30 20 10 0 175 AMBIENT TEMPERATURE, ( °C) 1 10 50 NUMBER OF CYCLES AT 50Hz FIG.4 - TYPICAL FORWARD CHARACTERISTICS FORWARD CURRENT, AMPERES 20 10 1.0 Ta = 25 °C 0.1 0.01 0.001 0 0.5 1.0 1.5 2.0 2.5 3.0 FORWARD VOLTAGE, VOLTS Page 2 of 2 Rev. 04: October 8, 2012