TH09/2479 TH97/2478 FEP30AP - FEP30JP Dual Ultrafast Plastic Rectifiers TO-247AD (TO-3P) PRV : 50 - 600 Volts Io : 30 Ampere 0.645 (16.4) 0.625 (15.9) 0.245(6.2) 0.225(5.7) FEATURES : * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * Dual rectifier construction, positive center-tap * Glass passivated chip junction * Superfast recovery times for high efficiency * Low forward voltage, high current high current capability * Low thermal resistance, low power loss * High temperature soldering guaranteed: 250 °C, 0.1"(4.06mm)from case for 10 seconds * Pb / RoHS Free 0.203(5.16) 0.193(4.90) 0.323 (8.2) 0.313 (7.9) 30° 0.170(4.3) 0.840(21.3) 0.820(20.8) 0.078 REF (1.98) 0.142(3.6) 0.138(3.5) 1 2 3 0.160(4.1) 0.140(3.5) 0.127(3.22) 0.177(2.97) 0.795(20.2) 0.775(19.7) 0.225(5.7) 0.205(5.2) 0.118(3.0) 0.106(2.7) PIN PIN PIN CAS 0.048(1.22) 0.044(1.12) 0.030(0.76) 0.020(0.51) Dimensions in inches and ( millimeters ) MECHANICAL DATA : * * * * IATF 0113686 SGS TH07/1033 Case : TO-247AD Molded plastic Polarity : As marked on the body Mounting position : Any Weight : 5.6 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise note. RATING SYMBOL FEP FEP FEP FEP FEP FEP FEP FEP UNIT 30AP 30BP 30CP 30DP 30FP 30GP 30HP 30JP Maximum Repetitive Peak Reverse Voltage VRRM 50 100 150 200 300 400 500 600 V Maximum RMS Voltage VRMS 35 70 105 140 210 280 350 420 V Maximum DC Blocking Voltage VDC 50 100 150 200 300 400 500 600 V Maximum Average Forward Rectified Current, Tc = 100°C IF(AV) 30 A IFSM 300 A Maximum Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) at Tc = 100°C 0.95 1.3 1.5 Maximum Instantaneous Forward Voltage at I F = 15 A VF Maximum Reverse Current at Tc = 25 °C IR 10 μA Rated DC Blocking Voltage Tc = 100 °C IR(H) 500 μA Maximum Reverse Recovery Time ( Note 1 ) Trr Typical junction capacitance at 4V, 1MHz Cj Maximum Thermal Resistance, Junction to Case Operating storage and temperature range 35 50 175 V ns 145 pF RθJC 1.2 °C/W TJ, TSTG - 55 to + 150 °C Note : (1) Reverse Recovery Test Conditions : IF = 0.5A, IR = 1A ; Irr = 0.25 A Page 1 of 2 Rev. 01 : March 6, 2006 TH09/2479 TH97/2478 IATF 0113686 SGS TH07/1033 RATING AND CHARACTERISTIC CURVES ( FEP30AP ~ FEP30JP ) FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG 36 300 30 250 PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD RECTIFIED CURRENT, (A) FIG.1 - FORWARD CURRENT DERATING CURRENT 24 18 12 6 0 0 25 50 75 100 125 200 150 100 TC= 100 °C 50 0 150 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 1 2 CASE TEMPERATURE, ( °C) FIG.3 - TYPICAL INSTANTANEOUS 10 20 40 60 100 PER LEG 100 10 FEP30AP - FEP30DP FEP30FP - FEP30GP FEP30HP - FEP30JP 10 TJ = 25 °C 1.0 Pulse Width = 300 μs 1% Duty Cycle 0 0.2 0.4 0.8 0.6 1.0 1.2 1.4 FEP30AP - FEP30DP FEP30FP - FEP30JP INSTANTANEOUS REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT, (A) 6 FIG. 4 - TYPICAL REVERSE CHARACTERISTICS FORWARD CHARACTERISTICS PER LEG 0.1 4 NUMBER OF CYCLES AT 60Hz 1.0 0.1 TJ = 25 °C 0.01 1.6 TJ = 100 °C 0 INSTANTANEOUS FORWARD VOLTAGE, (V) 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) JUNCTION CAPACITANCE, pF FIG. 5 – TYPICAL JUNCTION CAPACITANCE 1000 TJ = 25°C f = 1.0 MHz Vsig = 50 mVp-p 100 FEP30AP - FEP30DP FEP30FP - FEP30JP 0 0.1 1 10 100 REVERSE VOLTAGE, (V) Page 2 of 2 Rev. 01 : March 6, 2006