FES16AT - FES16JT Ultrafast Plastic Rectifiers TO-220AC PRV : 50 - 600 Volts Io : 16 Ampere 0.154(3.91)DIA. 0.148(3.74) FEATURES : 0.055(1.39) 0.045(1.14) 0.113(2.87) 0.103(2.62) * High current capability 0.145(3.68) 0.135(3.43) * High surge current capability 0.635(16.13) 0.625(15.87) * Low leakage, high voltage 0.603(15.32) 0.573(14.55) 0.350(8.89) 0.330(8.39) * Glass passivated chip junction 1 * Pb / RoHS Free 0.185(4.70) 0.175(4.44) 0.415(10.54)MAX. 2 0.160(4.06) 0.140(3.56) PIN 1 MECHANICAL DATA : 0.560(14.22) 0.530(13.46) CASE PIN 2 * Case : Epoxy, Molded * Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds * Polarity: As marked * Mounting Position: Any * Weight : 2.24 grams (Approximately) 0.037(0.94) 0.027(0.68) 0.205(520) 0.195(4.95) 0.022(0.56) 0.014(0.36) Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. RATING SYMBOL FES FES FES FES FES FES FES FES 16AT 16BT 16CT 16DT 16FT 16GT 16HT 16JT UNIT Maximum Repetitive Peak Reverse Voltage VRRM 50 100 150 200 300 400 500 600 V Maximum RMS Voltage VRMS 35 70 105 140 210 280 350 420 V Maximum DC Blocking Voltage VDC 50 100 150 200 300 400 500 600 V Maximum Average Forward Current, Tc = 100°C IF(AV) 16 A IFSM 250 A Maximum Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) at Tc = 100°C Maximum Instantaneous Forward Voltage at IF = 16 A VF 0.975 1.3 1.5 V Maximum Reverse Current at Tc = 25 °C IR 10 µA Rated DC Blocking Voltage Tc = 100 °C IR(H) 500 µA Maximum Reverse Recovery Time ( Note 1 ) Trr Typical junction capacitance at 4V, 1MHz Cj Maximum Thermal Resistance, Junction to Case Operating storage and temperature range 35 50 175 ns 145 pF RθJC 1.2 °C/W TJ, TSTG - 65 to + 150 °C Note : (1) Reverse Recovery Test Conditions : IF = 0.5A, IR = 1A ; Irr = 0.25 A Page 1 of 2 Rev. 02 : March 31, 2005 RATING AND CHARACTERISTIC CURVES ( FES16AT ~ FES16JT ) FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 300 24 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG.1 - FORWARD CURRENT DERATING CURRENT 20 16 12 8 4 0 TJ =TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC) Method 250 20 150 100 50 0 25 50 75 100 125 150 0 175 1 2 CASE TEMPERATURE, ( °C) 4 6 10 20 40 60 100 NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL INSTANTANEOUS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS FORWARD CHARACTERISTICS 100 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES 100 FES16AT - FES16DT FES16FT - FES16GT 10 FES16HT - FES16JT 1 TJ = 25 °C 0.1 0 Pulse Width = 300 µs 1% Duty Cycle TJ = 100 °C 10 1 TJ = 25 °C 0.1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 0 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) JUNCTION CAPACITANCE, pF FIG. 5 – TYPICAL JUNCTION CAPACITANCE 1000 FES16AT - FES16GT 100 TJ = 25°C f = 1.0 MHz Vsig = 50 mVp-p FES16HT - FES16JT 0 0.1 1 10 100 REVERSE VOLTAGE, VOLTS Page 2 of 2 Rev. 02 : March 31, 2005