Certificate TH97/10561QM FEP16AT - FEP16JT Ultrafast Plastic Rectifiers TO-220AB PRV : 50 - 600 Volts Io : 16 Ampere 0.154(3.91) DIA. 0.148(3.74) 0.415(10.54) MAX. 0.113(2.87) 0.103(2.62) FEATURES : * * * * * Certificate TW00/17276EM High current capability High surge current capability Low leakage, high voltage Glass passivated chip junction Pb / RoHS Free 0.145(3.68) 0.135(3.43) 0.635(16.13) 0.625(15.87) CASE + PIN 2 PIN 1 PIN 3 0.185(4.70) 0.175(4.44) 0.055(1.39) 0.045(1.14) 0.603(15.32) 0.573(14.55) 0.350(8.89) 0.330(8.39) 1 2 3 0.160(4.06) 0.140(3.56) 0.560(14.22) 0.530(13.46) Positive CT PIN 1 MECHANICAL DATA : * Case : Epoxy, Molded * Lead Temperature for Soldering Purposes: 260 °C Max. for 10 Seconds * Polarity: As marked * Mounting Position: Any * Weight : 2.24 grams (Approximately) CASE PIN 2 0.037(0.94) 0.027(0.68) 0.205(520) 0.195(4.95) PIN 3 Negative CT Suffix "A" 0.022(0.56) 0.014(0.36) 0.105(2.67) 0.095(2.41) Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. RATING SYMBOL FEP FEP FEP FEP FEP FEP FEP FEP 16AT 16BT 16CT 16DT 16FT 16GT 16HT 16JT UNIT Maximum Repetitive Peak Reverse Voltage VRRM 50 100 150 200 300 400 500 600 V Maximum RMS Voltage VRMS 35 70 105 140 210 280 350 420 V Maximum DC Blocking Voltage VDC 50 100 150 200 300 400 500 600 V Maximum Average Forward Current, TC = 100°C IF(AV) 16 A Maximum Peak Forward Surge Current IFSM 200 Maximum Instantaneous Forward Voltage at I F = 8 A VF 0.95 Maximum Reverse Current at TC = 25 °C IR 10 µA IR(H) 500 µA 8.3ms single half sine-wave superimposed on 125 A rated load (JEDEC Method) at Tc = 100°C Rated DC Blocking Voltage TC = 100 °C 1.3 50 V Maximum Reverse Recovery Time ( Note 1 ) Trr Typical junction capacitance at V R = 4V, f = 1MHz Cj Maximum Thermal Resistance, Junction to Case RӨJC 1.2 °C/W TJ, TSTG - 65 to + 150 °C Operating storage and temperature range 35 1.5 85 ns 60 pF Notes : (1) Reverse Recovery Test Conditions : I F = 0.5A, IR = 1A ; Irr = 0.25 A (2) For Negative CT add suffix "A" e.g. FEP16ATA, FEP16BTA … FEP16JTA Page 1 of 2 Rev. 03 : May 13, 2006 Certificate TH97/10561QM Certificate TW00/17276EM RATING AND CHARACTERISTIC CURVES ( FEP16AT ~ FEP16JT ) FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 24 300 20 250 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG.1 - FORWARD CURRENT DERATING CURRENT 16 12 8 4 0 TJ =TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC) Method 200 150 100 50 0 25 50 75 100 125 150 0 175 1 CASE TEMPERATURE, ( °C) 2 4 6 10 20 40 60 100 NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL INSTANTANEOUS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS FORWARD CHARACTERISTICS 100 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES 100 FEP16AT - FEP16DT FEP16FT - FEP16GT 10 FEP16HT - FEP16JT 1 TJ = 25 °C 0.1 0 0.2 0.4 Pulse Width = 300 μs 1% Duty Cycle 0.6 TJ = 100 °C 10 1 TJ = 25 °C 0.1 0.8 1.0 1.2 1.4 1.6 1.8 2.0 0 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) JUNCTION CAPACITANCE, pF FIG. 5 – TYPICAL JUNCTION CAPACITANCE 1000 FEP16AT - FEP16GT TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 100 FEP16HT - FEP16JT 10 0.1 1 10 100 REVERSE VOLTAGE, VOLTS Page 2 of 2 Rev. 03 : May 13, 2006