BYVF32 Series Dual Ultrafast Plastic Rectifiers ITO-220AB PRV : 50 - 200 Volts Io : 18 Ampere 0.134(3.4)DIA. 0.113(3.0)DIA. FEATURES : 0.185(4.70)Max. 0.406(10.3)MAX. 0.124(3.16)Max. 0.112(2.85) 0.100(2.55) * High current capability 0.272(6.9) 0.248(6.3) 0.603(15.5) 0.573(14.8) * High surge current capability * Low leakage, high voltage 1 * Glass passivated chip junction 2 3 0.110(2.8) 0.098(2.5) 0.161(4.1)Max. * Pb / RoHS Free 0.543(13.8) 0.512(13.2) 0.055(1.4)Max. MECHANICAL DATA : 0.035(0.9)Max. * Case : Epoxy, Molded * Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds * Polarity: As marked * Mounting Position: Any * Weight : 2.24 grams (Approximately) 0.030(0.76)Max. 0.100(2.55) PIN 1 PIN 3 PIN 2 Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Ta =25°C unless otherwise specified.) RATING SYMBOL BYVF32-50 BYVF32100 BYVF32-150 BYVF32200 UNIT Maximum Repetitive Peak Reverse Voltage VRRM 50 100 150 200 V Maximum RMS Voltage VRMS 35 70 105 140 V Maximum DC Blocking Voltage VDC 50 100 150 200 V Maximum Average Forward Current, Tc = 100°C IF(AV) 18 A IFSM 150 A VF 1.15 V Maximum Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) at Tc = 100°C Maximum Instantaneous Forward Voltage per Leg at IF = 20A IF = 5.0A, Tj = 100°C Maximum Reverse Current per Leg at Rated DC Blocking Voltage Maximum Reverse Recovery Time per Leg (IF = 1A, VR = 30V , di/dt = 100A/µs, Irr = 10%IRM) Typical junction capacitance at 4V, 1MHz Maximum Thermal Resistance, Junction to Case Operating storage and temperature range Page 1 of 2 0.85 IR 10 (Tc = 25°C) µA IR(H) 600 (Tc = 100°C) µA Trr 35 ns Cj 85 pF RθJC 3.0 °C/W TJ, TSTG - 55 to + 150 °C Rev. 02 : March 25, 2005 RATING AND CHARACTERISTIC CURVES ( BYVF32 Series ) FIG.1 - FORWARD CURRENT DERATING CURRENT FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG 150 Tj =150 °C Resistive or Inductive Load PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 24 20 16 12 8 4 0 10ms SINGLE HALF SINE-WAVE (JEDEC) Method 125 10 75 50 25 0 25 50 75 100 125 150 0 175 1 2 CASE TEMPERATURE, ( °C) FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG 10 20 40 60 100 CHARACTERISTICS PER LEG 100 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES 6 FIG. 4 - TYPICAL REVERSE 100 10 1 TJ = 25 °C 0.1 0 4 NUMBER OF CYCLES AT 60Hz Pulse Width = 300 µs 2% Duty Cycle TJ = 100 °C 10 1 TJ = 25 °C 0.1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 0 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) JUNCTION CAPACITANCE, pF FIG. 5 – TYPICAL JUNCTION CAPACITANCE PER LEG 80 70 TJ = 25°C f = 1.0 MHz Vsig = 50 mVp-p 60 50 40 30 20 10 0 1 10 100 1000 REVERSE VOLTAGE, VOLTS Page 2 of 2 Rev. 02 : March 25, 2005