FMN1 Diodes Switching diode FMN1 zDimensions (Unit : mm) zApplication Ultra high speed switching zLand size figure (Unit : mm) r 㧗 ޓ㧙ฦ࠼ߣ߽หኸᴺ Each lead has zFeatures 1) Small mold type. (SMD5) 2) High reliability 㪇㪅㪋㪌 㪇㪅㪊㪌 㪇㪅㪊㪌 㪇㪅㪋㪌 㪇㪅㪍 㧗 㧙 r r ޓޓޓ same dimension 㪉㪅㪋 㪈㪅㪇㪤㪠㪥㪅 㪇㪅㪏㪤㪠㪥㪅 㪇㪅㪐㪌 㪇㪅㪐㪌 zConstruction Silicon epitaxial planar r r 㨪 㨪 r 㪈㪅㪐 㪪㪤㪛㪌 zStructure 㩷 㪩㪦㪟㪤㩷㪑㩷㪪㪤㪛㪌 㪡㪜㪠㪫㪘㩷㪑㩷㪪㪚㪄㪎㪋㪘 㫎㪼㪼㫂㩷㪺㫆㪻㪼 zTaping specifications (Unit : mm) 㱢㪈㪅㪌㫧㪇㪅㪈 䇭䇭䇭䇭䇭㩷㩷㪇 㪉㪅㪇㫧㪇㪅㪇㪌 㪇㪅㪊㫧㪇㪅㪈 㱢㪈㪅㪇㪤㪠㪥 㪋㪅㪇㫧㪇㪅㪈 㪊㪅㪉㫧㪇㪅㪈 㪊㪅㪉㫧㪇㪅㪈 㪏㪅㪇㫧㪇㪅㪉 㪌㪅㪌㫧㪇㪅㪉 㪇䌾㪇㪅㪌 㪊㪅㪉㫧㪇㪅㪈 㪊㪅㪌㫧㪇㪅㪇㪌 㪈㪅㪎㪌㫧㪇㪅㪈 㪋㪅㪇㫧㪇㪅㪈 㪈㪅㪊㪌㫧㪇㪅㪈 zAbsolute maximum ratings (Ta=25qC) Parameter Reverse voltage (repetitive) Reverse voltage (DC) Forward currenẗ́Singleͅ Average rectified forward current Surge current(t=1us) Power dissipation Junction temperature Storage temperature Limits 80 80 80 25 250 80 150 -55 to +150 Symbol VRM VR IFM Io Isurge Pd Tj Tstg Unit V V mA mA mA mW 㷄 㷄 zElectrical characteristics (Ta=25qC) Parameter Forward voltage Reverse current Capacitance between terminals Reverse recovery time Symbol VF IR Min. - Typ. - Max. 0.9 0.1 Unit V μA Ct - - 3.5 pF trr - - 4 ns Conditions IF=5mA VR=70V VR=6V , f=1MHz VR=6V , IF=5mA , RL=50㱅 Rev.C 1/2 FMN1 Diodes zElectrical characteristic curves (Ta=25qC) 㪈㪇㪇 㪈㪇㪇㪇㪇㪇 㪫㪸㪔㪈㪌㪇㷄 㪫㪸㪔㪉㪌㷄 㪫㪸㪔㪄㪉㪌㷄 㪈 㪈㪇㪇㪇 㪫㪸㪔㪎㪌㷄 㪈㪇㪇 㪫㪸㪔㪉㪌㷄 㪈㪇 㪫㪸㪔㪄㪉㪌㷄 㪈 㪇㪅㪈 㪉㪇㪇 㪊㪇㪇 㪋㪇㪇 㪌㪇㪇 㪍㪇㪇 㪎㪇㪇 㪏㪇㪇 㪇㪅㪈 㪇 㪐㪇㪇 㪈㪇㪇㪇 㪝㪦㪩㪮㪘㪩㪛㩷㪭㪦㪣㪫㪘㪞㪜䋺㪭㪝㩿㫄㪭㪀 㪭㪝㪄㪠㪝㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪉㪇 㪊㪇 㪋㪇 㪌㪇 㪍㪇 㪎㪇 㪩㪜㪭㪜㪩㪪㪜㩷㪭㪦㪣㪫㪘㪞㪜䋺㪭㪩㩿㪭㪀 㪭㪩㪄㪠㪩㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪏㪇 㪇 㪈㪇㪇 㪎㪈㪇 㪩㪜㪭㪜㪩㪪㪜㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪩㩿㫅㪘㪀 㪍㪐㪇 㪍㪏㪇 㪘㪭㪜㪑㪍㪏㪉㪅㪎㫄㪭 㪍㪍㪇 㪏㪇 㪍㪇 㪌㪇 㪋㪇 㪊㪇 㪘㪭㪜㪑㪎㪅㪍㪏㪐㫅㪘 㪉㪇 㪩㪜㪪㪜㪩㪭㪜㩷㪩㪜㪚㪦㪭㪜㪩㪰㩷㪫㪠㪤㪜㪑㫋㫉㫉㩿㫅㫊㪀 㪈㪺㫐㪺 㪏㪅㪊㫄㫊 㪈㪇 㪌 㪎 㪍 㪌 㪋 㪊 㪘㪭㪜㪑㪈㪅㪇㪊㪐㫇㪝 㪉 㪈㪇 㪈 㪇 㪇 㪚㫋㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㪈㪇 㪠㪽㫊㫄 㪏 㪠㪩㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㪈㪌 㪘㪭㪜㪑㪉㪅㪌㪇㪘 㪇 㪌 㪫㪸㪔㪉㪌㷄 㪭㪩㪔㪍㪭 㪠㪝㪔㪌㫄㪘 㪩㪣㪔㪌㪇㱅 㫅㪔㪈㪇㫇㪺㫊 㪐 㪏 㪎 㪍 㪌 㪋 㪊 㪘㪭㪜㪑㪈㪅㪉㪍㫅㫊 㪉 㪈 㪇 㪠㪽㫊㫄 㪋 㪏㪅㪊㫄㫊 㪏㪅㪊㫄㫊 㪈㪺㫐㪺 㪊 㪉 㪈 㪇 㪈 㪠㪝㪪㪤㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㫋㫉㫉㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㪈㪇 㪈 㪇㪅㪈 㪈 㪈㪇 㪫㪠㪤㪜㪑㫋㩿㫄㫊㪀 㪠㪝㪪㪤㪄㫋㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪈㪇㪇 㪩㫋㪿㩿㫁㪄㪺㪀 㪈㪇㪇 Mounted on epoxy board 㪠㪤㪔㪈㫄㪘 㪈㫄㫊 㪠㪝㪔㪈㪇㫄㪘 㫋㫀㫄㪼 㪊㪇㪇㫌㫊 㪈㪇 㪇㪅㪇㪇㪈 㪈㪇㪇 㪐 㪩㫋㪿㩿㫁㪄㪸㪀 㪇㪅㪇㪈 㪇㪅㪈 㪈 㪈㪇 㪈㪇㪇 㪫㪠㪤㪜㪑㫋㩿㫊㪀 㪩㫋㪿㪄㫋㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪜㪣㪜㪚㪫㪩㪦㪪㪫㪘㪫㪠㪚 㪛㪠㪪㪚㪟㪘㪩㪞㪜㩷㪫㪜㪪㪫㩷㪜㪪㪛㩿㪢㪭㪀 㫋 㪫㪩㪘㪥㪪㪠㪜㪥㪫 㪫㪟㪘㪜㪩㪤㪘㪣㩷㪠㪤㪧㪜㪛㪘㪥㪚㪜㪑㪩㫋㪿㩷㩿㷄㪆㪮㪀 㪧㪜㪘㪢㩷㪪㪬㪩㪞㪜 㪝㪦㪩㪮㪘㪩㪛㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪝㪪㪤㩿㪘㪀 㪠㪽㫊㫄 㪈㪇 㪥㪬㪤㪙㪜㪩㩷㪦㪝㩷㪚㪰㪚㪣㪜㪪 㪠㪝㪪㪤㪄㪚㪰㪚㪣㪜㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪈㪇 㪈㪇㪇㪇 㪈㪇㪇 㪉㪇 㪫㪸㪔㪉㪌㷄 㪭㪩㪔㪍㪭 㪽㪔㪈㪤㪟㫑 㫅㪔㪈㪇㫇㪺㫊 㪐 㪎㪇 㪭㪝㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㪉㪇 㪌 㪈㪇 㪈㪌 㪩㪜㪭㪜㪩㪪㪜㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㪩㩿㪭㪀 㪭㪩㪄㪚㫋㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪈㪇 㪫㪸㪔㪉㪌㷄 㪭㪩㪔㪎㪇㪭 㫅㪔㪈㪇㫇㪺㫊 㪐㪇 㪫㪸㪔㪉㪌㷄 㪠㪝㪔㪌㫄㪘 㫅㪔㪊㪇㫇㪺㫊 㪎㪇㪇 㪍㪎㪇 㪈㪇 㪚㪘㪧㪘㪚㪠㪫㪘㪥㪚㪜㩷㪙㪜㪫㪮㪜㪜㪥 㪫㪜㪩㪤㪠㪥㪘㪣㪪㪑㪚㫋㩿㫇㪝㪀 㪈㪇㪇 㪈 㪧㪜㪘㪢㩷㪪㪬㪩㪞㪜 㪝㪦㪩㪮㪘㪩㪛㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪝㪪㪤㩿㪘㪀 㪇 㪝㪦㪩㪮㪘㪩㪛㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㪝㩿㫄㪭㪀 㪽㪔㪈㪤㪟㫑 㪇㪅㪇㪈 㪇㪅㪈 㪧㪜㪘㪢㩷㪪㪬㪩㪞㪜 㪝㪦㪩㪮㪘㪩㪛㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪝㪪㪤㩿㪘㪀 㪈㪇 㪫㪸㪔㪈㪉㪌㷄 㪚㪘㪧㪘㪚㪠㪫㪘㪥㪚㪜㩷㪙㪜㪫㪮㪜㪜㪥 㪫㪜㪩㪤㪠㪥㪘㪣㪪㪑㪚㫋㩿㫇㪝㪀 㪫㪸㪔㪈㪉㪌㷄 㪈㪇 㪫㪸㪔㪈㪌㪇㷄 㪈㪇㪇㪇㪇 㪩㪜㪭㪜㪩㪪㪜㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪩㩿㫅㪘㪀 㪝㪦㪩㪮㪘㪩㪛㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪝㩿㫄㪘㪀 㪫㪸㪔㪎㪌㷄 㪏 㪎 㪍 㪌 㪘㪭㪜㪑㪉㪅㪇㪍㫂㪭 㪋 㪊 㪘㪭㪜㪑㪇㪅㪌㪎㫂㪭 㪉 㪈 㪈㪇㪇㪇 㪇 㪚㪔㪉㪇㪇㫇㪝 㪩㪔㪇㱅 㪚㪔㪈㪇㪇㫇㪝 㪩㪔㪈㪅㪌㫂㱅 㪜㪪㪛㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 Rev.C 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright © 2007 ROHM CO.,LTD. THE AMERICAS / EUPOPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0