Compact Coaxial Connector PSH2 Series DDK Ltd. OUTLINE DDK’s PSH2 ultra-compact miniature coaxial connector provides the optimal balance of performance and size. This surface mounted (SMT) RF connector with VSWR performance of 1.3 at DC to 3GHz and VSWR of 1.5 at 3 GHz to 6 GHz and a stacking height of 1.5mm. This low cost connector is suitable for wireless LAN applications Frequency Range DC to 6GHz Characteristic Impedance 50 Ω based upon IEEE 802-11a. FEATURE ・Applicable frequency ranges DC to 3GHz or 3GHz to 6GHz ・Utilizes 50 ohm coaxial cable size of φ 0.81mm ・Compact and uktra-low profile mated height of 1.5mm ・30 mate/demate cycles ・Custom cable lengths available ・Applicable for IEEE 802.11a applications ・Tape and reel package for automated mounting machine ・RoHs Compliant APPLICATIONS ・Wireless LAN, Portable PC, Mobile Phone, Measurement Equipments, Bluetooth. SPECIFICATIONS Characteristic Impedance 50 Ω Dielectric Withstanding Voltage Insulation Resistance 200V AC(r.m.s.) / 1 minute 500M Ω Mim. at 100V DC Contact : 20m Ω max. Outer conductor : 10m Ω max. Contact Resistance V.S.W.R. Operating Temperature 60VAC(r.m.s.) 1.3 max. at DC to 3GHz 1.5 max. at 3 to 6GHz Plug 2 Rated Voltage Mating Height Receptacle PSH Series −40 to +85℃ Plug ＊ The specifications are typical but may not apply to all connectors. Please check PSH2-LP-OD0.81-CR3(L=200mm,both ended hemess） DC to 6GHz VSWR 1.7 1.5 the specifications on each item with its drawing from us when you use. Receptacle PSH2 Series VSWR 1.6 1.5 1.4 1.3 1.2 1.1 1.0 0 1 2 3 4 5 6 Frequency (GHz) 141028 ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp PSH2 Series PSH2 Series Unit：mm ○ Receptacle PSH2-SR-PS Part Number PSH2-SR-PS-1000 Outer Conductor Finish Quantity Au PSH2-SR-PS-5000 Reel packaging Au 1000 pcs./ reel 5000 pcs./ reel ※ Tape and reel packaging GND GND 2.6 1.4 0.5 1.3 1.5 1.3 0.85 Ø1.4 0.6 SIG SIG 0.5 2 GND 1.7 Pattern Prohibited Area PCB Monting Dimensions 1.3 1.7 1.85 0.3 RoHS MATERIAL/ FINISH Compliant Compliant Material / Finish Item ○ Packaging Specifications Receptacle Outer Conductor Copper Alloy / Au Plating Contact Copper Alloy / Au Plating Insulator Thermoplastic Resin / Black 13.4 18.4 MAX. ◆ Reel Dimensions ◆ Emboss Tape Dimensions 2 Center φ1.5 Conductor 5.5 12 4 1.75 ∅50 MIN. PSH2-SR-PS-1000：∅178 PSH2-SR-PS-5000：∅330 User direction of feed 8 ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp 2 PSH2 Series Unit：mm ○ Plug Cable Assembly PSH2-LP-OD0.81-CR3 Applicable Cable (4.6) Outer Conductor Finish Part Number Dia. φ 0.81 PSH2-LP-OD0.81-CR3 Au 2.1 ※ Plug connector is available in only cable assembly. MATERIAL/ FINISH Material / Finish Item 1.3 RoHS Compliant Compliant Plug Outer Conductor Copper Alloy / Au Plating Contact Copper Alloy / Au Plating Insulator Thermoplastic Resin / Black (3.8) Applicable Cable Size Cable Size O.D. φ 0.81 Center Conductor Insulator Outer Conductor Cable Dia. 7/0.05（AWG36） φ 0.4 Single Braid φ 0.81 Ag Plating FEP Sn Plating FEP Characteristic Impedance 50 Ω ○ Adapter DMP-SA-PSH2J DMP-SA-PSH2J 8 Hex Dia. (11.3) ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp 3 Attenuation max.(dB/m) 3GHz 6GHz 6.2 9.4 PSH2 Series Unit：mm ○ Cable Assembly 基本図番 Ｌ 指定事項 80-076-0009-XXXX-X-X 長さ指定：mm（4桁） 例）200mmの場合は Basic No. 0200と表記します Ｌ コネクタ角度(表1参照) ケーブル外被色（FEP) 1：黒色、2：白色 80-076-0009-XXXX-X-X 3：灰色、4：青色 基本図番 指定事項 5：赤色 ※黒色、灰色が標準です 80-076-0009-XXXX-X-X Connectors Angle （Refer to Table 1） 長さ指定：mm（4桁） Length：mm（4 fig.） 例）200mmの場合は 0200と表記します 200mm : 0200 コネクタ角度(表1参照) Cable Color（FEP） ケーブル外被色（FEP) 1：Black, 3：Gray, 1：黒色、2表2.ケーブル長公差表 ：白色 ：Ｌ 標準公差 3：灰色、4ケーブル長さ ：青色 ±3 25≦L≦200 5：赤色 ±5 200＜L≦500 ※黒色、灰色が標準です Table 2. Cable Length 500＜L≦1000 1000＜L Cable Length：L 25 ≦ L ≦ 200 表1.コネクタ角度表 ±10 ±1.5％ Tolerance ±3 200 表2.ケーブル長公差表 ＜ L ≦ 500 ±5 ：Ｌ 500 ケーブル長さ ＜ L ≦ 1000 ±10標準公差 25≦L≦200 ±1.5％ ±3 ±5 200＜L≦500 ±10 500＜L≦1000 1000＜L ±1.5％ Connector Angle 2 1000 ＜ L Table 1. Connector Angle Connector Angle １ 表1.コネクタ角度表 Connector Angle １ Connector Angle 3 Connector Angle 3 Connector Angle 2 Connector Angle 4 Connector Angle 4 ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp 4 ↓X PSH2 Series Unit：mm ○ Instruction Manual Pull-off Tool ⇒ When mating the connector, please insert the connector along the center conductor. When unmating the connector, please pull off vertically by using below tool ②Pull off vertically （No.357J-K8035-01）. Excessive torsional mating causes to①Insert be broken. ⇒ Pull-off Tool ⇒ (357J-K8035-01) ② Pull off vertically ⇒ ① Insert ↑2N（Max.) →4N（Max.) ・Allowable cable load at mating ↑X Do not add the load more than right figure. ↓2N（Max.) →2N ↓X MAX：260℃ 260 230 200 Pull-off Tool (357J-K8035-01) 150 100 50 Pre-heating 150～200℃ 60～120sec ⇒ Temperature[℃] ○ Reflow Temperature Profile 230℃ max.② 30～35sec Pull off vertically ⇒ ① Insert Time[sec] ※ Above reflow temperature plofile can be fluctuated by sort of the solder paste. Please test the soldering temperature beforehand. ※ The temperature is measured at the terminal area. ※ Reflow cycle is up to twice. ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp 5