Automotive Coaxial Connector PMP Series OUTLINE PMP series is a connector for connection between antenna and devices of terrestrial digital TV, ETC and DSRC. Frequency Range DC 〜 3GHz DC 〜 6GHz Characteristic Impedance 50 Ω Lock Type Inertia Lock PMP Type：Low profile connector which have lock levers on both side. Both upper and lower direction can be mated. PMP2 Type：Lock lever is located on the top of the connector. It is space-saving and easy operation. ※ PMP type and PMP2 type are not inter-matable. FEATURE ■ Adopting the inertia lock mechanism. Insert the plug connector, the connector is locked. Pull off with pushing the lock lever. ■ Audibly and tactually inertial lock ensures full coupling. ■ PMP type is SMT mounting type and 6.25mm mounting height. APPLICATION Car Navigation (GPS, VICS, Terrestrial Digital TV）,ETC, DSRC Receiver SPECIFICATIONS Applicable Cable Characteristic Impedance Rated Voltage Dielectric Withstanding Voltage Insulation Resistance Contact Resistance V.S.W.R. Operating Temperature 1D Type 1.5D Type 50 Ω 250VAC(r.m.s.) 300VAC (r.m.s.) / 1 minute 500VAC (r.m.s.) / 1 minute 1000M Ω min. at 250VDC 30m Ω max. 1.5 max. at DC 〜 3GHz 1.5 max. at DC 〜 6GHz -40 〜 +105℃ ＊ The specifications are typical but may not apply to all connectors. Please check the specifications on each item with its drawing from us when you use. 1.5 PMP-SP-1D-CR3 ( L=500mm, Double-ended Harness） DC∼3GHz VSWR 1.4 1.4 1.3 1.3 1.2 1.2 1.1 1.1 1.0 0 0.5 1 1.5 Frequency【GHz】 MATERIAL/FINISH Item 121226 1.5 2 2.5 3 PMP-SP-1.5D-CR3 ( L=500mm, Double-ended Harness） DC∼6GHz VSWR 1.0 0 1 2 3 4 5 6 Frequency【GHz】 RoHS Compliant Compliant PMP-LR-PS Material / Finish PMP-SP-1D-CR3 PA Resin / Black（UL94V-0） PMP-SP-1.5D-CR3 Body PPS Resin / Black（UL94V-0) PA Resin / Black（UL94V-0） Outer Conductor Copper Alloy / Contact Area：Au Copper Alloy / Contact Area：Au Copper Alloy / Contact Area：Au Tail Area：Sn reflow Termination Area：Sn-Ag Termination Area：Sn-Ag Other Area：Ni Other Are：Ni Other Area：Ni Insulator LCP Resin / Black（UL94V-0） PBT Resin / Black（UL94V-0） Contact Copper Alloy / Au Tab Copper Alloy /Mounting Area： Au Other Area：Ni Copper Alloy / Contact Area：Au Copper Alloy / Contact Area：Au Termination Area：Sn-Ag Termination Area：Sn-Ag Other Area：Ni Other Area：Ni PBT Resin / Black（UL94V-0） ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without a previous notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp PMP Series Unit：mm ○ Cable Plug (PMP Type) Part Number PMP-SP-1D-CR3 PMP-SP-xD-CR3 Applicable Cable Manufacturer 1D-QFB（A) Shikoku Cable HR-1.5D-QEFA(K) PMP-SP-1.5D-CR3 Fujikura 1.5D-HQ・SUPER Fujikura 1.5DS-QFBS Shikoku Cable Termination：Open-barrel Cable Size：Refer to the table as right. Connector Style：Straight Plug PMP Type Plug Interface (19) 9 6 4.5 10 (13.4) (11.4) Series：PMP Type ○ Receptacle (PMP Type) PMP-LR-PS Mounting Type：SMT Connector Style： Right angle Receptacle Series：PMP Type 5.5 14 (15.5) PMP Type Jack Interface (18.2) 12.4 (5.75) 2.9 2.2 1.5 1.8 2.75 1.5 2.6 12.5 (17.3) 2.9 5.7 1.5 6.5 (2.45) 6.25 6 PCB Mounting Dimension 1.5 6 (8) (7.5) ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without a previous notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp 2 PMP Series Unit：mm ○ Cable Plug（PMP2 Type） Part Number Applicable Cble PMP2-SP-1D-CR3 PMP2-SP-xD-CR3 Manufacturer 1D-QFB（A) Shikoku Cable HR-1.5D-QEFA(K) PMP2-SP-1.5D-CR3 Fujikura 1.5D-HQ・SUPER Fujikura 1.5DS-QFBS Shikoku Cable Termination ： Open-barrel 6 Cable Size：Refer to the table as right. Connector Style：Straight Plug Series：PMP2 Type 9 10 (19) ※ This product is under developing. Please contact our sales office about the details. ○ Receptacle（PMP2 Type） PMP2-LR-PS Mounting Type：SMT Connector Style：Right angle Receptacle Series：PMP2 Type 2.9 5.7 1.5 6.5 (2.45) 2.5 5.9 7.9 7.65 PCB Mounting Dimensions (8) 6 (7.5) ※ This product is under developing. Please contact our sales office about the details. ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without a previous notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. A3 http://www.ddknet.co.jp 3 (16.1) 10.3 1.5 (5.75) 2.9 5.5 14 (15.5) PMP2 Type Jack Interface 2.75 1.8 2.2 1.5 10.8 (15.2) 2.6 8 7.2 PMP2 Type Plug Interface