Coaxial Protector SHT Series OUTLINE Coaxial protector which protects devices from lightning surge through the antenna. FEATURE ◆ Short stub type ◆ DC power supply can not be applied. ◆ Other intarface is available on your request. APPLICATION Base Station, Protection of Antenna Apparatus SPECIFICATIONS Characteristic Impedance Contact Resistance V.S.W.R. 50 Ω 3m Ω Max. 1.2 max. at 800MHz to 2200MHz Insertion Loss 0.2dB Max. at 800MHz to 2200MHz Impulse Discharge Current 10kA min. (8/20 μ s), 50 times Waterproof Rating IP 67 ＊ The specifications are typical but may not apply to all connectors. Please check the specifications on each item with its drawing from us when you use. MATERIAL/FINISH Item 110530 RoHS Compliant Compliant Material / Finish Contact Copper Alloy / Ag Plating Body Copper Alloy / White Bronze Plating Insulator PTFE ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without a previous notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp SHT Series Unit：mm ○ Short Stub SHT-7/16-SA-JP-800-2200-CF Ｍ２９ 1.5 41 Ｃ ← 7/16 Jack Interface Ｂ Ｍ２９ 1.5 29 7/16 Plug Interface Hex Dia.：３２ Ｂ 32.7 34 (93.3) 7 Min. Thread Length 29 ２-M6 １ 16 Section Ｂ-Ｂ ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without a previous notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp 2 φ35 (83) φ20.6