0.4mm pitch ultra-low profile FPC back

0.4mm Pitch Ultra-low Profile
FPC Back-lock Connector【Upper Contact】
FF18 Series
OUTLINE
FF18 series is a connector with a cable lock mechanism
to provide positive retention of the FPC. This LIF
connector has a dedicated upper contact to interface
with the FPC at a 0.4mm pitch. The ultra-low profile
connector has a 0.66mm height, making it one of the
smallest board mounted FPC LIF connectors on the
market.
FEATURE
-DDK’s original cam-type back-lock system provides reliable operation and ensures retention from
inadvertent upward pulling of the FPC.
-The FF18 LIF connector utilizes a cable lock mechanism to provide positive retention of the FPC.
-Back-lock mechanism ensures retention from inadvertent from upward pulling of the FPC.
-These ZIF connectors are delivered with the lock lever opened for maximum production
efficiency.
-Available in pin counts for this low profile connector are 4, 5, 6, 7, 8, 9 and 10.
-High-temperature resin for lead free reflow process.
-FF18 ZIF connectors are delivered in a tape and reel package for automated machine processes .
Note : Please do not close the lock lever without inserting the FPC.
Since cable lock tabs electrify next contacts, please do not use the cable lock tabs
as ground tabs.
APPLICATIONS
Mobile phone, notebook PC, PDA, other Portable devices
SPECIFICATIONS
Rated Voltage
50V AC (r.m.s.)
Rated Current
0.4A / Contact
Dielectric Withstand Voltage
200V AC (r.m.s.) / 1 minute
Insulation Resistance
100 M Ω min. at 500V DC
Contact Resistance
50m Ω max.
MATERIAL/FINISH
Item
141012
RoHS
Compliant
Compliant
Material / Finish
Conatct
Copper Alloy / Au (Flash) over Ni
Housing
LCP Resin (UL94V-0) / Ivory
Lock lever
PPS Resin (UL94V-0) / Black
◎ Specifications and/or dimenssions in this catalogue are subject to change without notice.
Your catalogue checking the latest speifications with our drawings would be highly appreciated.
http://www.ddknet.co.jp
Unit:mm
FF18 Series
○ 0.4㎜ Pitch FPC Back-lock Connector
FF18- □□ A-R11A
①
②
③
④ ⑤ ⑥ ⑦
① Series
FF18
② Number of Contact
Refer to th table 1
③ Contact Position
A:Upper Contact
④ Contact Style
R: Right Angle
⑤ Contact Tail Length
1:0.40mm
⑥ Contact Plating
1:Au (Flash) over Ni
⑦ Lock Lever Style
A: Standard
Dimensions
Applicable PCB Thickness:0.12±0.03mm
Recommended PCB
Mounting Dimensions
D±0.07
0.70 max.
(1.39)
A
C
3.50
(3.15)
1.85±0.05
NO.1 Contact
0.40
0.23±0.03
D
0.75±0.05
0.10
Connector Location
(3.35)
0.45
0.25±0.05
0.04 X
0.75±0.05
C
0.45
0.04 X
Recommended
No.1 Contact
0.40±0.07
FPC Dimensions
B
D
0.45±0.05
0.12±0.03
C
0.15
0.45
X
FF18- 4A-R11A
FF18- 5A-R11A
FF18- 6A-R11A
FF18- 7A-R11A
FF18- 8A-R11A
FF18- 9A-R11A
FF18- 10A-R11A
15
20
0.
R .20
0
R
0.
0.27±0.03
0.40±0.03
0.70±0.07
Table−1
Part Number
R
0
0. .20
20
1.20
1.40±0.30
0.20
0.45
R
R
0.45
Stiffener
(0.07)
0.27±0.03
0.70±0.07
D±0.03
E±0.05
Number of
A
B
C
D
E
4
3.50
2.70
2.10
1.20
2.60
6
4.30
3.50
2.90
2.00
3.40
8
5.10
4.30
2.80
4.20
5.90
5.10
3.60
5.00
Contact
5
7
9
10
3.90
4.70
5.50
3.10
3.90
4.70
2.50
1.60
3.30
2.40
4.10
3.20
3.70
4.50
◎ Specifications and/or dimenssions in this catalogue are subject to change without notice.
Your catalogue checking the latest speifications with our drawings would be highly appreciated.
http://www.ddknet.co.jp
2
3.00
3.80
4.60
(2.50 min.)
X
0.45±0.05
0.15
0.85±0.05
0.12±0.03
0.15
0.45
0.40
0.12±0.03
13.50
22.40
16.40
FF18 Series
Unit:mm
○ Package Specifications
User direction400mm
of feed min.
φ80
φ330
13.50
22.40
16.40
User direction of feed
φ80
φ330
■ Reel Dimensions
Tailer:30 pockets min.
4000 pockets
Leader:15 pockets min.
Empty components pockets
sealed with cover tape.
Empty components
pockets
400mm min.
sealed with cover tape.
User direction of feed
Tailer:30 pockets min.
4000 pockets
Leader:15 pockets min.
Empty components pockets
sealed with cover tape.
■エンボスキャリアテープ寸法図
Empty components pockets
sealed with cover tape.
User direction of feed
■ Emboss Tape Dimensions
■エンボスキャリアテープ寸法図
+0.1
4.00
D
1.50 0
1.75
2.00
D
C
8.00
16.00±0.3
14.25
7.50
C
8.00
C
3.40
3.40
1.84
Section D-D
C
D
1.84
Section D-D
14.25
A
7.50
A
1.50 0
16.00±0.3
+0.1
4.00
D
1.75
2.00
Section
C-C
Section C-C
Part Number
Number of
AA
芯数
品 名
FF18- 4A-R11A
Contacts4 3.80
品 名
4.20
FF18- 5A-R11A
5
FF18- 4A-R11A
4
3.80
4.60
FF18- 6A-R11A
64A-R11A
FF185.00
FF18- 7A-R11A
7
FF185A-R11A
FF18- 5A-R11A
5
4.20
5.40
FF18- 8A-R11A
8
FF18- 96A-R11A
5.80
FF18- 9A-R11A
FF18- 6A-R11A
6
4.60
FF187A-R11A
6.20
FF18-10A-R11A
10
■ Quantity:4000pcs./reel
FF18- 7A-R11A
FF18- 8A-R11A
◎ Specifications and/or dimenssions in this catalogue are subject to change without notice.
Your catalogue checking the latest speifications with our drawings would be highly appreciated.
http://www.ddknet.co.jp
3
FF18- 8A-R11A
7
5.00
FF18- 9A-R11A
FF18-10A-R11A
8
5.40
FF18- 9A-R11A
9
5.80
FF18- 10A-R11A
10
6.20
芯数
4
5
6
7
8
9
10
A
3.80
4.20
4.60
5.00
5.40
5.80
6.20
FF18 Series
Umit:mm
○ Operating Instruction and Cautions
1.Connector mounting Instruction
Lock lever is opened when delivery.
Connectors are delivered with a lock lever opened.
picture ①
You do not have to operate the lock lever before inserting FPC.
(picture ① )
Please do not re-flow with the lock lever closed condtion.
Please close the lock-lever with inserting FPC, otherwise
the contact gap become narrower and FPC insertion force will rise.
(picture ② )
picture ②
Please do not load (0.5N×pin Min.) from the top of the lock lever.
(figure ① ) And please do not load (0.5N×pin Min) toward the opposite
direction of the lock lever, (figure ② )
otherwise the lock lever may be broken or contacts may be deformed.
0.5N×pin Min
0.5N×pin Min
figure ②
figure ①
While FPC mated with connector, cable lock tabs conduct to both ends of contacts.
Please do not ground the cable lock tab pad on the mounting board.(figure: ③)
Cable Lock Tab
Cable Lock Tab pad
▼
Please do NOT ground
Contact
▼
▼
▼
▼
Contact pad
▼
▼
▼
▼
▼
▼
Connector
▼
P.C.B (mounting side)
FPC
figure ③
◎ Specifications and/or dimenssions in this catalogue are subject to change without notice.
Your catalogue checking the latest speifications with our drawings would be highly appreciated.
http://www.ddknet.co.jp
4
FF18 Series
Umit:mm
○ Operating Instruction and Cautions
2.FPC Insertion
Please insert FPC to the pattern side up.(picture ③④ )
Please insert FPC straight to the connector.
Due to the semi-reteining mechanism,
some insertion force is necessary when inserting FPC.
Please make sure whether FPC is inserted fully.
Pattern side
Stiffener side
NG
picture ③
picture ④
3.Correct FPC Insertion Position
As illustrated (picture ⑤ ), you can check short insertion(picture ⑥ ) and diagonal
insertion(picture ⑦ ) by checking the position of connector housing and FPC positioning edge.
If the FPC positioning edge is exposed from the connector housing,
it may be short insertion or diagonal insertion. Please re-insert FPC fully.
FPC edge
OK
NG
NG
picture ⑤
picture ⑥
picture ⑦
Correct insertion
Short insertion
Diagonal insertion
◎ Specifications and/or dimenssions in this catalogue are subject to change without notice.
Your catalogue checking the latest speifications with our drawings would be highly appreciated.
http://www.ddknet.co.jp
5
FF18 Series
Umit:mm
○ Operating Instruction and Cautions
4.Closing Lock Lever
Please rotate down the lock lever until firmly closed. (picture ⑧ )
Please do not load excessive force(3N Min) on the housing(picture ⑨ )
and please do not close the lock lever by tip of a nail.(picture ⑩ )
It may cause breakage of the lock lever.
OK
NG
NG
3N Min
picture ⑧
picture ⑨
Picture ⑩
5.Removing FPC
Please lift the lock lever like flipping up in the direction of arrow.(picture ⑪ )
Please do not load excessive force (0.5N×pin Min.) on the lock lever.(picture ⑫ )
When operating the lock lever, please make sure to not catch to the connector housing.
It may cause breakage of the housing (figure ④ ).
OK
picture ⑪
NG
0.5N×pin Min
picture ⑫
6.ESD (Electrostatic Discharge)
This connector is not taken ESD measure.
7.Disposal of Connector
Please dispose the connector as industrial waste.
◎ Specifications and/or dimenssions in this catalogue are subject to change without notice.
Your catalogue checking the latest speifications with our drawings would be highly appreciated.
http://www.ddknet.co.jp
6
NG
figure ④