Serial ATA Revision 3.0 /LIF-SATA Compliant Connectors 【Dual Contact】 DDK Ltd. FF35 Series OUTLINE FF35 series is a FPC connector conforming to SATA specification (Serial ATA Revision 3.0/LIF-SATA). It has 0.5mm pitch, 24 contcts FPC connector which is mounted on SSD(Solid State Drive) or other devices. FEATURE ◆ Front-access back lock design is short depth and suitable to compact device. ◆ DDK's cable lock mechanism provides positive retention of the FPC. ◆ Connectors are delivered with the lock lever opened. Time saving for FPC inserting operation. ◆ With the upper and lower contacts design, all FPC insertion directions are availavle. ◆ Back-lock structure ensures retention from inadvertent from upward pulling of the FPC. ◆ The lock lever does not fall down to the opposite side. ◆ Nickel barrier prevents solder wicking. ◆ Halogen free APPLICATIONS SSD, PC, Tablet devices, other Portable devices. SPECIFICATIONS Rated Voltage 50V AC(r.m.s.) Rated Current 0.5A / Contact Dielectric Withstand Voltage 200V AC (r.m.s.) / 1 minute Insulation Resistance 100 M Ω min. as 500V DC Contact Resistance 50m Ω max. Operating Temperature −55℃ to + 85℃ Durability 20 Cycles MATERIALS / FINISH Item 130807 RoHS Compliant Compliant Material / Finish Contact Copper Alloy / Au(Flash) over Ni Plating Locking Tab Copper Alloy / Au(Flash) over Ni Plating Housing LCP Resin(UL94V-0)/ Ivory Lock Lever PPS Resin(UL94V-0)/ Black ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp Unit:mm FF35 Series ○ 0.50mm Pitch FPC Connector【Dual Contact】 FF35- 24 A- R 11B - 3 H ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ① Series FF35 ② Number of Contact 24 Contacts ③ Contact Position A:Dual Contact Applicable FPC Thickness:0.20±0.03mm ④ Contact Style R:Right Angle ⑤ Contact Pich 1:0.50mm ⑥ Contact Plating 1:Au (Flash) over Ni Plating ⑦ Lock Lever Type B:With Cable Lock ⑧ Material 3H:Halogen Free 0.50 5.75 1.00 0.10 16.80 15.57 0.35 0.05( 2) 0.10 X 0.12 0.03 ( 24) 0.15 X 5.75 6.65 0.15 0.03 0.20 X 6.65 15.00 0.02 X 15.80 2.15 0.22 0.05 2.15 0.50 0.10 0.12 0.03 ( 24) 11.50 0.10 No.1 Contact No.24 Contact ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 2 2.98 3.40 (3.04) ◆ Dimensions ・推奨接着剤(Recommended Adhesive) :熱硬化接着剤(Heat-hardened adhesive) Unit:mm FF35 Series ○ 0.50mm Pitch FPC Connector【Dual Contact】 ◆ Applicable FPC Dimension Centerline of Datum X Y 0.70 0.05( 2) 0.500.10 X 0.25 05( 0. 6.65 Z 0.50 min. 5.75 0.70 0.05 ( 2) 0.10 X 0.20 0.03 Centerline of Datum X 0.35 0.03 ( 24) 0.20 Z X Y 5.75 0.05 Z 6.65 0.0 5( 4) 1.40 0.30 0 .2 R0 .20 R0 0.70 0.05 ( 2) 0.10 Y 14.95 0.05 4) 0.80 0.50 min. Supporting Tape 2) R0 .20 0.80 4) R0 .20 05( 0. ( 5 0.0 0.0 5( 4) 1.40 0.30 0 .2 R0 0.70 0.05( 2) 0.10 X X 2) Applicable FPC recommended dimension Applicable for FPCforRecommended Dimension Y ( .05 0 ・推奨接着剤(Recommended Adhesive) ・推奨FPCめっき(Recommended plating of FPC) :熱硬化接着剤(Heat-hardened adhesive) 0.50 .20 0.25 0.35 0.03 ( 24) ・Recommended plating of FPC:Gold over Nickel plating R0 0.70 0.05 :Ni下地Auめっき(Gold over Nickel plating) ( 2) 0.20 ZXY Adhesive:Heat-hardened adhesive ・推奨接着剤(Recommended Adhesive)5.75 5.75 0.10・Recommended Y :熱硬化接着剤(Heat-hardened adhesive) 0.05 Z 6.65 6.65 0.70 0.05 ( 2) 14.95 0.05 0.10 X X Supporting Tape 0.20 0.03 Z Applicable for FPC recommended dimension ・推奨接着剤(Recommended Adhesive) :熱硬化接着剤(Heat-hardened adhesive) 0.30 0.03( 24) 0.04 X 11.50 Pattern-prohibited area ( .05 0 0 2 . R0 0.70 0.05 ( 2) 0.10 Y 0.50 0.25 5.75 3.00 以上 0.70 0.05 ( 2) 0.10 X 6.65 2.150 15.80 5.75 6.65 14.95 0.05 Applicable P.C.B. Dimension Applicable P.C.B. Dimension Applicable for FPC recommended dimension ・推奨FPCめっき(Recommended plating of FPC) :Ni下地Auめっき(Gold over Nickel plating) 上 ・推奨接着剤(Recommended Adhesive) :熱硬化接着剤(Heat-hardened adhesive) Supporting Tape( 0.5mm pitch FPC connector ) Y 0.45 0.05 0.20 0.03 0.35 0.03 ( 24) 0.04 X 0.20 Z X Y Z 0.05 Z ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 1.75 0.05 0.80 4) Applicable P.C.B. Dimension 2.150 2) 2.150 0.30 0.03( 24) 0.04 X Centerline of Datum X0.45 0.05 0.04 X 15.80 R0 .20 05( 0. 3.00 min. 0 .2 R0 0.70 0.05( 2) 0.10 X Pattern-prohibited area 0.95 0.05 0.50 0.0 5( 4) 1.40 0.30 X2.150 0.95 0.05 0.50 min. 0.70 0.05 1.75 0.05 3.00 min. (3.40) ◆ Applicable P.C.B. Dimension (3.40) 0.50 ・推奨FPCめっき(Recommended plating of FPC) 11.50 :Ni下地Auめっき(Gold over Nickel plating) 0.70 0.05 X X FF35-24A-R11B-3H G-503488(2/2) ( 0.5mm pitch FPC connector ) FF35-24A-R11B-3H 3 G-503488(2/2) Unit:mm FF35 Series ○ Package Specifications 400mm min. END END 26.5 TYP. User direction of feed User direction of feed φ 80 φ 328 φ 80 φ 328 26.5 TYP. 32.4 TYP. 38.4 Max. 32.4 TYP. 38.4 Max. ■ Reel Dimensions 400mm min. START START D C D D 32.0 0.30 28.4 0.10 14.2 28.4 0.10 φ1 .50 +0.1 0 0 D 3.60 TYP. C 3.60 TYP. 14.2 17.1 17.1 Section C ‒ C Section D ‒ D Section D ‒ D (Packing Spec) (Packing Spec) FF35-24A-R11B-xx-PS FF35-24A-R11B-xx-PS AA50-FF-133 (1/3) AA50-FF-133 (1/3) ■ Quantity:1500 pcs/reel ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 1.75 2.00 C C Section C ‒ C φ1 .50 +0.1 0 0 (24.00) (24.00) 12.00 12.00 4.00 4.00 2.00 32.0 0.30 ■ Emboss Tape Dimensions 1.75 Leader: 15 Pockets min. Tailer: 20 Pockets min. 1500 Pockets Leader: 15 Pockets min. Tailer: 20 Pockets min. 1500 Pockets Empty component pockets Empty component pockets Empty component pockets sealed with cover tape. Empty component pockets sealed with cover tape. User direction of feed sealed with cover tape. sealed with cover tape. User direction of feed 4