22mm Specifications Electrical and Mechanical Characteristics Standard conformity: Approvals: Degree of protection: Temperature Range: IEC 60947-5-1 VDE0660 CSA - C22.2 No. 14-95 UL508 IEC 947 - 5 (1) 1990, IS 13947 ASTA UK certified as per IEC 947 - 5 - (1) 1990 IP 65 as per IEC 529 NEMA Type 4X, 12 as per UL50 - 25°C to + 70°C (-13°F to +158°F) Contact Block Rated insulation voltage: Rated thermal current: Contact operation: Make and break capacity as per IEC 947 - 5 - (1) 1990: As per CSA - C22.2 No. 14-95, UL508: Terminal capacity: Terminal marking: Short circuit protection: Mechanical life: Electric rating (for 1 million operation cycles, operation at 3600 cycles per hour, load factor 0.5) 500V 10A self-wiping, slow break NO or NC AC 15 4A, 415V AC DC 13 0.5A, 110V DC A600 Q600 (pilot Duty) minimum 1 x 0.5 mm2 (20 AWG) maximum 2 x 1.52 mm2 (2x16 AWG) or 1 x 2.5 mm2 (1x14 AWG) 1-2 for NC, 3-4 for NO 10A cartridge fuse HRC type, rated for resistive loading Over 1 million operations AC 15 V A 24 120 230 4 3 2 DC 13 V A 24 110 0.5 0.2 Modules for Pilot Lights & Illuminated Switches with LED Bulbs Current consumption (applicable to all colors) 24 VAC/DC, 100 VAC & 240 VAC: 110 VDC: 220 VDC: Service life (at nominal voltage and at ambient temperature of 25°C): Voltage limits (nominal voltage): Short circuit protection: Terminal capacity: max. 20 mA max. 15 mA max. 10 mA 100,000 hours <20% of rated voltage> on specific request min. 1 x 0.5 mm2 (20 AWG), max. 2 x 1.5 mm2 (2x16 AWG) or 1 x 2.5 mm2 (1x14 AWG) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 25