PREVIOUS DC - 2 WIRE NAMUR Brass, Nickel Plated (BN), and Plastic (TROGAMID-T) Cylindrical,Threaded HOME NEXT • Low energy device • Operates in hazardous areas with external amplifier • Meets NAMUR regulations and DIN 19234 specifications • Carries FIND IT • IEC(529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection • Reverse Polarity Protection • Plastic and Metal Housing according to NAMUR Regulations and DIN 19234 • Temperature Range: -25 to 70°C (-13 to 158°F) (For extended temperature models of -40°C to +125°C, consult Altech.) mark M8 Flush Mount Sensing Distance Cable or Connector Style Cat. No. Nickel Plated Brass (BN) M8 Non-Flush Mount 1mm (.04 in.) 2mm (.08 in.) Cable 65 Cable 65 9932-0100 9932-0165 9932-0200 9932-0265 Plastic (TROGAMID T) 9932-1600 ≤5% ≤5% ≤15% ≤5% 8.2V DC at 1KΩ 8.2V DC at 1KΩ 8.2V DC at 1KΩ 8.2V DC at 1KΩ Output Current ( with target detection) 0.5 mA 0.5 mA 0.5 mA 0.5 mA Output Current ( no target detection) 3.5 mA 3.5 mA 3.5 mA 3.5 mA 2000 0Hz 2000 Hz 1000 Hz 1000 Hz Hysterisis ≤15% ≤15% ≤15% ≤15% Temperature Drift ≤10% ≤10% ≤10% ≤10% .1mm (.004 in.) .1mm (.004 in.) .2mm (.008 in.) .2mm (.008 in.) Ripple Voltage Switching Frequency Repeatability Front Cap Material PBTP (Metal Housing) PBTP (Metal Housing) PBTP (Metal Housing) M M 8 8 Fixed Cable PVC 2m (6ft. 6in.). For 5m (16 ft. 5 in.) cable length, change the last two digits of the part number to 02. For other cable lengths and/or PUR cable, please consult Altech. Non-metallic locknuts for M8 and Brass, Nickel Plated (BN) locknuts for M12 through M30. PBTP (Metal Housing) x x 30 5 1 1 30 25 Voltage Range (supplied by Pulsotronic 8100-2200 Unit) M 28 23 5 1 1 x x 8 8 M 50 12 50 M x 1 1 x ©Altech 12 50 M 65 Style Connector 4-pin, Micro style, 12mm (.47 in.) supplied with non-metallic locknuts for M8 and Brass, Nickel Plated (BN) locknuts for M12 through M30. Corp. • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 PREVIOUS HOME NEXT Metric/in. Conversion Table 1.0 mm 5.0 mm 6.0 mm 8.0 mm 12.0 mm 23.0mm = = = = = = .04 in. .20 in. .23 in. .31 in. .47 in. .91 in. 24.0 mm 25.0 mm 28.0 mm 30.0 mm 40.0 mm 50.0 mm FIND IT Accessories = = = = = = 2 meter (6 ft. 6 in.) DC Cable Assemblies for Quick Disconnect Sensors .94 in. 1.0 in. 1.16 in 1.20 in. 1.57 in. 1.97 in. This table converts millimeters to inches in reference to the illustrations included on these pages 65 Connectors, 4 PIN – 4 Wire cable (PIN 1, 2, 3, 4) : 65 Connector 8000-5280 PVC Right Angle Channge last digit of connector number to 5 for 5 meter cable Refer to pages 116-121 for more cable information M12 Flush Mount M12 Non-Flush Mount 2mm (.08 in.) 4mm (.16 in.) Cable 65 Cable 65 9932-0300 9932-0365 9932-0400 9932-0465 9932-1100 9932-1000 ≤15% ≤5% ≤5% ≤5% 8.2V DC at 1KΩ 8.2V DC at 1KΩ 8.2V DC at 1KΩ 8.2V DC at 1KΩ 0.5 mA 0.5 mA 0.5 mA 0.5 mA 3.5 mA 3.5 mA 3.5 mA 3.5 mA 2000 Hz 2000 Hz 1000 Hz 1000 Hz ≤15% ≤15% ≤15% ≤15% ≤10% ≤10% ≤10% ≤10% .2mm (.008 in.) .2mm (.008 in.) .4mm (.016 in.) .4mm (.016 in.) PBTP (Metal Housing) Remote Amplifier – Use 8100-2200, see page 123 PBTP (Metal Housing) PBTP (Metal Housing) Mounting Brackets – see Pages 114-115 PBTP (Metal Housing) Note: Sensor dimensions in mm. Wiring Diagrams Note: Wire colors are applicable to cable purchased from Altech 1 1 x x 12 12 M M Fixed Cable BR + 24 30 6 Remote Amplifier BL – M 12 1 12 x M 65 Connector x 1 BR 1 + 4 24 Amplifier 3 40 2 12 50 M 3 4 0 50 0 6 Remote WHT – x 1 ©Altech Corp. • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 51