Other information

NEXT
FIND IT
Table of Contents
CLICK FOR PDF FILE
CLICK FOR PDF FILE
CLICK FOR PDF FILE
OVERVIEW –
Inductive Proximity Sensors
CYLINDRICAL
Inductive Proximity Sensors
LIMIT STYLE
Inductive Proximity Sensors
Introduction ........................................4
Operation ............................................5
Introduction/Operation .......................8
Selection Guide, DC styles................12
Selection Guide, AC styles ................14
Product Specifications......................16
Introduction/Operation .....................68
Selection Guide.................................71
Product Specifications......................72
CLICK FOR PDF FILE
CLICK FOR PDF FILE
CLICK FOR PDF FILE
BLOCK STYLE
Inductive Proximity Sensors
RING STYLE
Inductive Proximity Sensors
ACCESSORIES for
Inductive Proximity Sensors
Introduction/Operation .....................80
Selection Guide.................................82
Product Specifications......................84
Introduction/Operation .....................98
Selection Guide...............................100
Product Specifications....................102
Introduction ....................................113
Mounting Brackets .........................114
Cable Assemblies............................116
Switching Units...............................122
Motion Detectors............................128
OTHER INFORMATION
APPENDIX:
IP Codes .........................................132
NEMA requirements .......................133
Cross Reference .............................134
Glossary..........................................135
Conversion Charts ..........................137
INDEX .............................................138
TERMS & CONDITIONS .................141
WARRANTY....................................143
All specifications subject to change without notice or obligation
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490
3
APPENDIX
PREVIOUS
HOME
NEXT
FIND IT
IP Codes (International Protection) Protection Levels - IEC 529/ EN 60529, DIN, VDE 0470 Part 1
IEC 529 outlines an international classification
system for the sealing effectiveness of enclosures of electrical equipment against the intrusion into the equipment of foreign bodies
(i.e., tools, dust, fingers) and moisture. This
classification system utilizes the letter "IP"
(International or Ingress Protection) followed by
two digits. (An "X" is used for one of the digits if
there is only one class of protection; i.e., IP X4
which addresses moisture resistance only.)
1st
digit
0
1
2
First Digit
Degree of protection against contact with moving parts (other than smooth rotating shafts, etc.)
and the ingress of solid foreign bodies.
Second Digit
Degree of protection against the harmful entry
of various forms of moisture (i.e., dripping,
spraying, submersion, etc.
3
Protection From Solid Objects
No special protection
Protection from a large part of the
body such as a hand (but no
protection from deliberate
access); from solid objects
greater than 50mm in diameter.
Protection against fingers or other
objects not greater than 80mm in
length and 12mm in diameter.
Protection from entry by tools,
wires, etc., with a diameter or
thickness greater that 2.5mm
4
Protection from entry by solid
objects with a diameter or
thickness greater than 1.0mm
5
Protection from the amount of
dust that would interfere with the
operation of equipment
6
Dust-tight
2st
digit
Protection From Moisture
0
1
2
No special protection
Protection from dripping water
Protection from vertically
dripping water
3
Protection from sprayed water
4
Protection from splashed water
5
Protection from water projected
from a nozzle
6
Protection against heavy seas, or
powerful jets of water
7
Protection against immersion
8
Protection against complete
continuous submersion in water
Note: All first digits and second digits up to and including characteristic digit 6, imply compliance also with the requirements for all
lower characteristic digits in their respective series (first or second). Second digits 7 and 8 do not imply suitability for exposure to
water jets (second characteristic digit 5 or 6) unless dual coded; i.e., IP _5/IP_7.
132
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490
PREVIOUS
NEMA Enclosure Standards
The following information is derived
from the NEMA Standard #250, dated
May 1988. Altech is providing this information as a guideline. Please consult
the NEMA Standards for your specific
requirements.
HOME
NEXT
FIND IT
NEMA REFERENCE
NON-HAZARDOUS LOCATIONS
TESTS CONDUCTED
TYPE 1 enclosures are intended for indoor use
primarily to provide a degree of protection against
contact with the enclosed equipment.
Rust entry
Rust resistance
TYPE 2 enclosures are intended for indoor use
primarily to provide a degree of protection against
limited amounts of falling water and dirt.
Rod entry
Drip
Rust resistance
TYPE 3 enclosures are intended for outdoor use
primarily to provide a degree of protection against
windblown dust, rain, and sleet; and to be
undamaged by the formation of ice on the enclosure.
Rain
Dust
External icing
Rust resistance
TYPE 3R enclosures are intended for outdoor use
primarily to provide a degree of protection against
falling rain; and to be undamaged by the formation
of ice on the enclosure.
Rod entry
Rain
External icing
Rust resistance
TYPE 3S enclosures are intended for outdoor use
primarily to provide a degree of protection against
windblown dust, rain, and sleet, and to provide for
operation of external mechanisms when ice laden.
Rain
Dust
External icing
Rust resistance
TYPE 4 enclosures are intended for indoor or
outdoor use primarily to provide a degree of
protection against windblown dust and rain,
splashing water, and hose directed water.
Hosedown
External icing
Rust resistance
TYPE 4X enclosures are intended for indoor or
outdoor use primarily to provide a degree of
protection against corrosion, windblown dust and
rain, splashing water, and hose -directed water.
Hosedown
External icing
Corrosion resistance
TYPE 6 enclosures are intended for indoor or
outdoor use primarily to provide a degree of
protection against the entry of water during
temporary submersion at a limited depth.
Submersion
External icing
Rust resistance
TYPE 6P enclosures are intended for indoor or
outdoor use primarily to provide a degree of
protection against the entry of water during
prolonged submersion at a limited depth.
Air pressure
External icing
Corrosion resistance
TYPE 12 enclosures are intended for indoor use
primarily to provide a degree of protection against
dust, falling dirt, and dripping non-corrosive liquids.
Drip
Dust
Rust resistance
TYPE 13 enclosures are intended for indoor use
primarily to provide a degree of protection against
dust, spraying water, oil, and non-corrosive coolant.
Oil exclusion
Rust resistance
HAZARDOUS LOCATIONS
TESTS CONDUCTED
TYPE 7 enclosures are intended for indoor use in
locations classified as Class I, Groups A, B, C, or D,
as defined in the National Electrical Code.
Explosion
Hydrostatic
Temperature
TYPE 9 enclosures are intended for indoor use in
locations classified as Class II, Groups E, F or G, as
defined in the National Electrical Code.
Dust Penetration
Temperature
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490
133
PREVIOUS
HOME
NEXT
FIND IT
Conversion Chart from L, R, & T Series Sensors to 8 digit Altech part numbers
The chart below is provided to aid our customers who wish to
order Altech/Pulsotronic Sensors that have previously been
ordered by part numbers beginning with L', 'R' or 'T'.
If you have a part with the 'L', 'R' or 'T' designation listed
Model
Specifications
same as
below, the equivalent Altech/Pulsotronic part number is listed
for your convenience. Customer service will accept orders
with either number.
Model
Specifications
same as
Model
Specifications
same as
Model
Specifications
same as
L12-A113
9853-2400
T12-A160
9952-0400
T18-A1180
9954-2267
T30-A118
9956-1566
L12-D313
9863-2100
T12-A161
9952-0462
T18-A160
9954-1900
T30-A1180
9956-1567
L12-D413
9863-0400
T12-A1610
9952-0468
T18-A161
9954-1962
T30-A160
9956-1400
R40-A605
9853-3031
T12-A168
9952-0466
T18-A1610
9954-1968
T30-A161
9956-1462
R40-A655
9853-3131
T12-A1680
9952-0467
T18-A168
9954-1966
T30-A1610
9956-1468
R40-A-675
9853-3231
T12-A210
9952-0900
T18-A1680
9954-1967
T30-A168
9956-1466
R40-D305
9863-3333
T12-A211
9952-0962
T18-A210
9954-2600
T30-A1680
9956-1467
R40-D355
9863-3433
T12-A2110
9952-0968
T18-A211
9954-2662
T30-A210
9956-1900
R40-D375
9863-3533
T12-A218
9952-0966
T18-A2110
9954-2668
T30-A211
9956-1962
R40-D405
9863-3033
T12-A2180
9952-0967
T18-A218
9954-2666
T30-A2110
9956-1968
R40-D455
9863-3133
T12-A260
9952-0800
T18-A2180
9954-2667
T30-A218
9956-1966
R40-D475
9863-3233
T12-A261
9952-0862
T18-A260
9954-2500
T30-A2180
9956-1967
T04-D410
9961-1000
T12-A2610
9952-0868
T18-A261
9954-2562
T30-A260
9956-1800
T05-D410
9961-1100
T12-A268
9952-0866
T18-A2610
9954-2568
T30-A261
9956-1862
T08-D310
9907-1900
T12-A2680
9952-0867
T18-A268
9954-2566
T30-A2610
9956-1868
T08-D310L
9961-0300
T12-D310
9962-1500
T18-A2680
9954-2567
T30-A268
9956-1866
T08-D318
9961-0365
T12-D311
9962-4162
T18-D310
9964-1600
T30-A2680
9956-1867
T08-D3180
9961-0363
T12-D318
9962-4165
T18-D311
9964-4162
T30-D310
9966-1200
T08-D360
9907-2100
T12-D3180
9962-4163
T18-D318
9964-4165
T30-D311
9966-4162
T08-D360L
9961-0500
T12-D360
9962-1700
T18-D3180
9964-4163
T30-D318
9966-4165
T08-D368
9961-0565
T12-D361
9962-4362
T18-D360
9964-1800
T30-D3180
9966-4163
T08-D3680
9961-0563
T12-D368
9962-4385
T18-D361
9964-4362
T30-D360
9966-1400
T08-D410
9907-1800
T12-D3680
9962-4363
T18-D368
9964-4365
T30-D361
9966-4362
T08-D410L
9961-0200
T12-D410
9962-1400
T18-D3680
9964-4363
T30-D368
9966-4365
T08-D418
9961-0265
T12-D411
9962-4062
T18-D410
9964-1500
T30-D3680
9966-4363
T08-D4180
9961-0263
T12-D418
9962-4065
T18-D411
9964-4062
T30-D410
9966-1100
T08-D460
9907-2000
T12-D4180
9962-4063
T18-D418
9964-4065
T30-D411
9966-4062
T08-D460L
9961-0400
T12-D460
9962-1600
T18-D4180
9964-4063
T30-D418
9966-4065
T08-D468
9961-0465
T12-D461
9962-4262
T18-D460
9964-1700
T30-D4180
9966-4063
T08-D4680
9961-0463
T12-D468
9962-4265
T18-D461
9964-4262
T30-D460
9966-1300
T12-A110
9952-0500
T12-D4680
9962-4263
T18-D468
9964-4265
T30-D461
9966-4262
T12-A111
9952-0562
T18-A110
9954-2200
T18-D4680
9964-4263
T30-D468
9966-4265
T12-A1110
9952-0568
T18-A111
9954-2262
T30-A110
9956-1500
T30-D4680
9966-4263
T12-A118
9952-0566
T18-A1110
9954-2268
T30-A111
9956-1562
9803-30
9803-3800
T12-A1180
9952-0567
T18-A118
9954-2266
T30-A1110
9956-1568
9803-38
9803-3862
134
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490
PREVIOUS
HOME
Glossary of Technical
Definitions and Terminology
Active Surface:
Portion of the sensor from which the electromagnetic field
radiates.
Analog Output:
The output voltage is proportionately to the distance of the
target to the sensor's active surface.
Complementary Outputs (N.O. & N.C.):
A proximity sensor that features both normally open and a
normally closed output, which can be used simultaneously.
Correction Factors:
Multiplication factors taking into account variations in the
target material composition. When calculating actual sensing distance, this figure should be multiplied by the normal
sensing distance, Sn.
Current Sinking: See NPN
Current Sourcing: See PNP
Damping Material:
Material which causes a decrease in the strength of the
electromagnetic or electrical field produced by the sensing coil.
Differential Travel: See Hysteresis.
Dynamic Output:
A sensor output that outputs a short pulse of a defined
period when a target is detected.
Effective Operating Distance - 'Sr':
The operating distance of an individual proximity switch
measured at stated temperature and voltage. It takes into
account variations in manufacturing tolerances.
Ferrous Metal: Any metal containing iron.
Flush Mounting:
A shielded or embedded proximity sensor can be flush
mounted in metal. It can be surrounded by metal up to the
active sensing face.
Hysteresis:
The difference, in percentage (%),of the nominal sensing
distance between the operate (switch on) and release
point (switch off) when the target is moving away from the
sensor's active face. Without sufficient hysteresis a proximity sensor will "chatter" (continuously switch on and off)
when there is a significant vibration applied to the target or
sensor.
Leakage Current:
Current which flows through the output when the output is
in an "off" condition or de-energized.
NEXT
FIND IT
LED:
Light Emitting Diode used to indicate sensor status.
Load:
A device that consumes power to perform a function.
Maximum Load Current:
The maximum current at which the proximity sensor can
be continuously operated.
Minimum Inrush Current:
The maximum current level at which the proximity sensor
can be operated for a short period of time.
Minimum Load Current:
The minimum amount of current required by the sensor to
maintain reliable operation.
Namur Sensor:
A 2-wire, variable resistance sensor which requires a
remote amplifier for operation. Typically used in intrinsically safe applications.
Nominal Sensing Distance:
The distance,Sn, at which an approaching target activates
(changes state of) the proximity output. This is also called
the rated operating distance.
Non-Ferrous Metal:
Any metal which does not contain iron.
Non-Flush Mounting:
Unshielded, or non-embeddable sensors must have a so
called "free zone" around the sensor head, with no non-target metal present to operate satisfactorily.
Normally Closed:
Output opens when an object is detected in the active
switching area.
Normally Open:
Output closes when an object is detected in the active
switching area.
NPN:
The sensor switches the load to the positive terminal. The
load should be connected between the sensor output and
positive terminal.
Operating Distance, Assured:
Between 0 and 81% of the rated operating distance for
inductive proximity switches. It is specified as Sa.
Operating Distance, Rated:
The operating distance specified by the manufacturer and
used as a reference value. Also known as nominal sensing
distance, Sn.
Overload Protected:
The ability of a sensor to withstand load currents between
continuous load rating and a short circuit condition without
any damage.
continued...
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490
135
PREVIOUS
HOME
NEXT
FIND IT
Glossary, cont.
PNP:
The sensor switches the load to the negative terminal. The
load should be connected between the sensor output and
negative terminal.
Programmable Output, (N.O. or N.C.):
Output which can be changed from N.O. to N.C. or N.C. to
N.O. by way of a switch or jumper wire. Also known as
selectable output.
Rated Operating Distance - 'Sn':
Sometimes called nominal operating distance, it does not
take into account manufacturing tolerances or variations in
temperature or voltage.
Repeatability:
The repeat accuracy of a sensor to detect an object at the
same distance away from the active sensing face. It is
expressed as a percentage of the sensing distance, or
can be calculated as a specific measurement value.
Residual Voltage:
The voltage across the sensor output while energized and
switching the maximum load. It is the voltage drop across
the sensor.
Response Time: See Switching Frequency
Reverse Polarity Protection:
Proximity sensors which are protected against a reversal in
voltage polarity.
Ripple:
The variance between peak-to-peak values in DC voltage.
It is expressed as a percentage of rated voltage.
Sensing Face:
A surface of the proximity sensor parallel to the target,
from which the operating distance is measured
Shielded:
Sometimes called Flush or Embedded.
Short Circuit Protection:
Sensor protected from damage when a shorted condition
exists for an indefinite period of time without change.
Static Output:
A sensor output that stays energized as long as the target
is present.
Supply Current:
The current consumed by the proximity switch when the
output transistor is in the off condition.
Switching Frequency:
The maximum number of times per second the sensor can
change state, (ON and OFF), usually expressed in Hertz
(Hz)., as measured by DIN EN 50010.
Target:
Object which activates the sensor.
136
Temperature Drift:
Specification used to indicate the change in switching
point caused by temperature variations within a specified
ambient temperature range. Expressed as a percentage
of the sensing distance.
Useable Operating Distance - 'Su':
The operating distance measured over a voltage range of
85% to 110% of its rated voltage. It allows for manufacturing tolerances.
Voltage Drop:
The maximum voltage drop across a conducting sensor.
Weld Field Immunity (WFI):
The ability of a sensor not to false trigger in the presence
of strong electromagnetic fields.
Wire Break Protection:
The output is off if either power supply wire is broken.
SENSOR HOUSING MATERIALS
Plastics: Trogamid T – Polyamide, used in cylindrical,
block and limit style sensors. Hard, rigid, good resistance
to chemicals, resists caustic cleaners, approved for food
contact.
PBTP: Polybutelyne terephthalate, used in block sensors
and front caps of cylindrical nickel plated brass units.
Excellent mechanical strength and temperature resistance. Self-extinguishing and flame retardant. Weld splash
proof.
PA6.6: Polyamid (Nylon), used in limit style sensors.
Excellent mechanical strength, temperature resistant,
accepted in food industry.
ABS: Acrylonitrile-Butadiene-Stypol. Used in ring sensors.
Impact resistant. Rigid.
PUR: Polyurethane, used in cables and cable assemblies.
Elastic, abrasion proof, impact resistant, unaffected by oil,
grease and solvents.
PVC: Polyvinylchloride, used on cables and cable assemblies. Good mechanical strength, resistant to chemicals.
PTFE – TEFLON: Used on weld immune cylindrical sensors. Highest resistance to high temperature and chemicals.
METALS: Brass, Nickel Plated, used on cylindrical sensors. Rugged, resists thread damage.
Aluminum, used on block and ring sensors. Lightweight,
excellent strength to weight ratio. Resistant to corrosion.
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490
PREVIOUS
HOME
NEXT
FIND IT
Commonly used metric and other useful conversions
Length
inch [in.]
millimeters [mm]
meters [m]
miles [mi]
kilometers [km]
x25.4
x0.03937
x3.281
x1.609
x0.6214
=millimeters
=inches
=feet
=kilometers
=miles
Torque
Newtonmeter [Nm]
lb-ft
lb-in
oz-in
x0.738
x1.356
x0.113
x0.0071
=lb-ft
=Nm
=Nm
=Nm
Power
kilowatt [kW]
hp
x1.341
x0.7457
=hp
=kW
Moment of Inertia
(WR2)
x0.042
lb-ft2
kilogrammeter2
23.720
[kgm2 ]
Weight Mass and Force
Newton [N]
x0.02248
kilogram [kg]
x2.205
pound [lb]
x4.448
pound [lb]
x0.4536
=kgm2
=lb-ft2
=pounds
=pounds
=N
=kg
DEGREES CELCIUS VERSUS DEGREES FAHRENHEIT
°C
°F
°C
°F
-80
-70
-60
-50
-45
-112.0
-94.0
-65.0
-58
-49.1
-20
-19
-18
-17
-16
-4.0
-2.2
-0.4
+1.4
3.2
-40
-39
-38
-37
-36
-40.0
-38.2
-36.4
-34.6
32.8
-15
-14
-13
-12
-11
-35
-34
-33
-32
-31
-31.0
29.2
-27.4
-25.6
-23.8
-30
-29
-28
-27
-26
-25
-24
-23
-22
-21
°C
°F
°C
°F
5
6
7
8
9
41.0
42.8
44.6
46.4
48.2
30
31
32
33
34
86.0
87.8
89.6
91.4
93.2
5.0
6.8
8.6
10.4
12.2
10
11
12
13
14
50.0
51.8
53.6
55.4
57.2
35
36
37
38
39
-10
-9
-8
-7
-6
14.0
15.8
17.6
19.4
21.2
15
16
17
18
19
59.0
60.8
62.6
64.4
66.2
-22.0
-22.0
-18.4
-16.6
-14.8
-5
-4
-3
-2
-1
23.0
24.8
26.6
28.4
30.2
20
21
22
23
24
-13.0
-11.2
-9.4
-7.6
-5.8
0
1
2
3
4
32.0
33.8
35.6
37.4
39.2
25
26
27
28
29
Conversion Formula °F = 9/5°C + 32°
°C
°F
°C
°F
°C
55
56
57
58
59
131.0
132.8
134.6
136.4
138.2
80
81
82
83
84
176.0
177.8
179.6
181.4
183.2
105
106
107
108
109
95.0
96.8
98.6
100.4
102.2
60
61
62
63
64
140.0
141.8
143.6
145.4
147.2
85
86
87
88
89
185.0
186.8
188.6
189.4
192.2
40
41
42
43
44
104.0
105.8
107.6
109.4
111.2
65
66
67
68
69
149.0
150.8
152.6
154.4
156.2
90
91
92
93
94
68.0
69.8
71.6
73.4
75.2
45
46
47
48
49
113.0
114.8
116.8
118.4
120.2
70
71
72
73
74
158.0
159.8
161.6
163.4
165.2
77.0
78.8
80.6
82.4
84.2
50
51
52
53
54
122.0
123.8
125.6
127.4
129.2
75
76
77
78
79
167.0
168.8
170.6
172.4
174.2
°F
°C
°F
°C
°F
221.0
222.8
224.6
226.4
228.2
130
131
132
133
134
266.0
267.8
269.6
271.4
273.2
200
210
220
230
240
392
410
428
446
464
110
111
112
113
114
230.0
231.8
233.6
235.4
237.2
135
136
137
138
139
275.0
276.8
278.6
280.4
282.2
250
300
350
400
500
482
572
662
752
932
194.0
195.8
197.6
199.4
201.2
115
116
117
118
119
239.0
240.8
242.6
244.4
246.2
140
141
142
143
144
284.0
285.8
287.6
289.4
291.2
600
700
800
900
1000
1112
1292
1472
1652
1832
95
96
97
98
99
203.0
204.8
206.6
208.4
210.2
120
121
122
123
124
248.0
249.8
251.6
253.4
255.2
145
146
147
148
149
293.0
294.8
296.6
298.4
300.2
1100
1200
1300
1400
1500
2012
2192
2372
2552
2732
100
101
102
103
104
212.0
213.8
215.6
217.4
219.2
125
126
127
128
129
257.0
258.8
260.6
262.4
264.2
150
160
170
180
190
302.0
320.0
338.0
356.0
374.0
1600
1700
1800
1900
2000
2912
3092
3272
3452
3632
°C = 5/9(°F-32°)
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490
137
INDEX
PREVIOUS
HOME
NEXT
FIND IT
Index by Catalog Number
Cat. #
138
Page
8000-5030
8000-5040
8000-5060
8000-5070
8000-5110
8000-5120
8000-5130
8000-5140
8000-5150
8000-5160
8000-5220
8000-5230
8000-5240
8000-5280
116
116
116
116
118
118
119
119
120
120
121
121
121
118
8100-0930
8100-2100
8100-2130
8100-2200
8100-2400
8100-2500
8100-2700
8100-2800
8102-0900
124
125
125
125
126
126
130
130
124
8300-0100
8300-0500
8303-0430
8309-0130
8309-0230
122
122
129
127
127
9512-6100
9512-6200
9512-6400
9512-6600
9512-8200
114
114
114
114
115
9700-0159
9701-0259
9701-0759
9702-0259
9702-0400
9702-0500
9703-0159
9704-0159
9705-0259
9705-0500
9705-0659
9706-0159
9706-0659
9707-0159
9707-0659
9787-0059
9708-0059
9708-0159
9708-0559
9708-0659
108
106
106
106
102
102
109
109
104
102
104
105
105
105
105
104
104
104
104
104
Cat. #
Page
Cat. #
Page
9709-0259
9709-0359
9711-0059
9713-0059
9714-2000
9714-4300
9803-3000
9807-0100
9807-0159
9807-0165
9807-0900
9807-0959
9807-0965
9809-0100
9809-0159
9809-0300
9809-0359
9809-0400
9809-0459
9809-0500
9809-0559
9809-3400
9809-3459
9809-3500
9809-3559
9814-1133
9814-2133
9853-2400
9853-2500
9853-3600
9853-3700
9853-3800
9853-3900
9853-5831
9853-5931
9855-0062
9855-1000
9855-1100
110
110
108
106
112
112
95
88
88
88
88
88
88
90
90
90
90
90
90
90
90
90
90
90
90
75
92
94
94
94/96
94/96
94/96
94/94
78
78
95
95
95
9863-5933
9864-0200
9865-1033
9865-1133
9873-0031
9873-0231
9873-3031
9873-3231
76
88
91
91
74
74
77
77
9883-2033
9883-2233
9883-2333
9883-2533
9883-3033
9883-3233
9883-3333
9883-3533
72
72
72
72
73
73
73
73
9914-0500
9914-0565
9914-0800
9914-0865
9914-0900
9914-0965
9914-1000
9916-2100
9916-2168
9916-2300
9916-2368
9916-2400
9916-2500
9916-2600
9916-2668
9916-2700
9916-2768
9916-2900
9916-3000
44
44
44
44
44
44
44
62
62
63
63
62
63
62
62
63
63
62
63
9861-1000
9861-1064
9861-1100
9861-1164
9863-0400
9863-0464
9863-2100
9863-2164
9863-2700
9863-2764
9863-2900
9863-2964
9863-3800
9863-3900
9863-4300
9863-4400
9863-4600
9863-5833
84
84
84
84
86
87
87
86
86
86
86
86
93
93
128
128
128
76
9921-1200
9921-1268
9921-1300
9921-1368
9921-1369
9921-1500
9921-1568
9921-1700
9921-1768
9921-2000
9921-2100
9921-2200
9921-2300
9924-0400
9924-0468
9924-0500
9924-0568
9921-0700
9924-0768
61
61
61
61
61
61
61
61
61
61
61
61
61
60
60
60
60
60
60
Cat. #
Page
9924-0900
9924-0968
9924-1000
9924-1100
9924-1200
9924-1300
60
9932-0100
9932-0165
9932-0200
9932-0265
9932-0300
9932-0365
9932-0400
9932-0465
9932-0500
9932-0565
9932-0600
9932-0665
9932-0700
9932-0765
9932-0800
9932-0865
9932-1000
9932-1100
9932-1300
9932-1400
9932-1500
9932-1600
50
50
50
50
51
51
51
51
52
52
52
52
53
53
53
53
51
51
52
53
53
50
9952-0400
9952-0462
9952-0466
9952-0467
9952-0468
9952-0500
9952-0562
9952-0566
9952-0567
9952-0568
9952-0800
9952-0866
9952-0867
9952-0868
9952-0900
9952-0966
9952-0967
9952-0968
9952-5640
9952-5648
9952-5700
9952-5768
9952-5840
9952-5848
9952-5900
9952-5968
56
56
56
56
56
56
56
56
56
56
56
56
56
56
56
56
56
56
64
64
64
64
64
64
64
64
60
60
60
60
Cat. #
Page
9954-1900
9954-1962
9954-1966
9954-1967
9954-1968
9954-2200
9954-2262
9954-2266
9954-2267
9954-2268
9954-2500
9954-2568
9954-2600
9954-2666
9954-2667
9954-2668
9954-5640
9954-5700
9954-5768
9954-5840
9954-5848
9954-5900
9954-5968
57
57
57
57
57
57
57
57
57
57
57
57
57
57
57
57
65
65
65
65
65
65
65
9956-1400
9956-1462
9956-1466
9956-1467
9956-1468
9956-1500
9956-1562
9956-1566
9956-1568
9956-1800
9956-1868
9956-1900
9956-5640
9956-5648
9956-5700
9956-5768
9956-5840
9956-5848
9956-5900
9956-5968
59
59
59
59
59
58
58
58
58
59
59
58
66
66
66
66
66
66
66
66
9961-0200
9961-0263
9961-0264
9961-0265
9961-0300
9961-0363
9961-0364
9961-0365
9961-0400
9961-0463
9961-0464
9961-0465
24
24
24
24
24
24
24
24
24
24
24
24
Cat. #
Page
9961-0500
9961-0563
9961-0564
9961-0565
9961-1200
9961-1264
9961-1300
9961-1364
9961-4400
9961-4464
9961-4465
9961-4500
9961-4564
9961-4565
9961-4600
9961-4664
9961-4665
9961-4700
9961-4764
9961-4765
24
24
24
24
35
35
35
35
24
24
24
24
24
24
24
24
24
24
24
24
9962-1400
9962-1500
9962-1600
9962-1700
9962-2300
9962-2365
9962-3100
9962-3200
9962-3300
9962-3400
9962-4000
9962-4063
9962-4064
9962-4065
9962-4100
9962-4163
9962-4164
9962-4165
9962-4200
9962-4263
9962-4264
9962-4265
9962-4300
9962-4363
9962-4364
9962-4365
9962-4400
9962-4464
9962-4465
9962-4500
9962-4564
9962-4565
9962-4600
9962-4664
9962-4665
9962-4700
32
32
32
32
31
31
32
32
32
32
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
24
24
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490
PREVIOUS
HOME
NEXT
FIND IT
Index by Catalog Number
Cat. #
Page
9962-4764
9962-4765
9962-5600
9962-5665
9962-5700
9962-5764
9962-5765
9962-5840
9962-5845
9962-5900
9962-5965
9962-6010
9962-6065
9962-6110
9962-6165
9962-6200
9962-6265
9962-6300
9962-6365
24
24
54
54
54
54
54
40
40
40
40
38
38
38
38
36
36
36
36
9964-1500
9964-1600
9964-1700
9964-1800
9964-3100
9964-3200
9964-3300
9964-3400
9964-4000
9964-4063
9964-4065
9964-4100
9964-4163
9964-4165
9964-4200
9964-4263
9964-4265
9964-4300
9964-4363
9964-4365
9964-4400
9964-4465
9964-4500
9964-4565
9964-4600
9964-4665
9964-4700
9964-4765
9964-5400
9964-5500
9964-5840
9964-5845
9964-5900
9964-5965
9964-6010
9964-6065
9964-6110
32
32
33
33
32
32
33
33
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
54
54
41
41
41
41
39
39
39
Cat. #
Page
9964-6165
9964-6200
9964-6265
9964-6300
9964-6365
39
37
37
36
36
9966-1100
9966-1200
9966-1300
9966-1400
9966-3300
9966-3400
9966-3900
9966-3965
9966-4000
9966-4063
9966-4065
9966-4100
9966-4163
9966-4165
9966-4200
9966-4263
9966-4265
9966-4300
9966-4365
9966-4400
9966-4465
9966-4500
9966-4565
9966-4600
9966-4665
9966-4700
9966-4765
9966-5400
9966-5500
9966-5840
9966-5845
9966-5900
9966-5965
33
33
33
33
33
33
30
30
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
55
55
42
42
42
42
9980-1010
9980-1064
9980-1110
9980-1164
9980-2010
9980-2064
9980-2110
9980-2164
34
34
34
34
34
34
34
34
9981-2000
9981-2064
9981-2065
9981-2100
9981-2164
9981-2165
9981-2200
9981-2264
16
16
16
16
16
16
16
16
Cat. #
Page
9981-2265
9981-2300
9981-2364
9981-2365
9981-4000
9981-4064
9981-4065
9981-4100
9981-4164
9981-4165
9981-4200
9981-4264
9981-4265
9981-4300
9981-4364
9981-4365
9981-5000
9981-5064
9981-5065
9981-5200
9981-5264
9981-5265
16
16
16
16
28
28
28
28
28
28
28
28
28
28
28
28
46
46
46
46
46
46
9982-2000
9982-2064
9982-2065
9982-2100
9982-2164
9982-2165
9982-2200
9982-2264
9982-2265
9982-2300
9982-2364
9982-2365
9982-4000
9982-4064
9982-4065
9982-4100
9982-4164
9982-4165
9982-4200
9982-4264
9982-4265
9982-4300
9982-4364
9982-4365
9982-4400
9982-4464
9982-4465
9982-4500
9982-4564
9982-4565
9982-4600
9982-4664
9982-4665
9982-4700
17
17
17
17
17
17
17
17
17
17
17
17
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
Cat. #
Page
9982-4764
9982-4765
9982-4900
9982-4950
9982-5000
9982-5065
9982-5200
9982-5265
20
20
29
29
47
47
47
47
9984-2000
9984-2065
9984-2100
9984-2165
9984-2200
9984-2265
9984-2300
9984-2365
9984-4000
9984-4065
9984-4100
9984-4165
9984-4200
9984-4265
9984-4300
9984-4365
9984-4400
9984-4465
9984-4500
9984-4565
9984-4600
9984-4665
9984-4700
9984-4765
9984-4900
9984-4950
9984-5000
9984-5065
9984-5200
9984-5265
18
18
18
18
18
18
18
18
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
29
29
48
48
48
48
9986-2000
9986-2065
9986-2100
9986-2165
9986-2200
9986-2265
9986-2300
9986-2365
9986-4000
9986-4065
9986-4100
9986-4165
9986-4200
9986-4265
9986-4300
9986-4365
9986-4400
19
19
19
19
19
19
19
19
22
22
22
22
22
22
22
22
22
Cat. #
9986-4465
9986-4500
9986-4565
9986-4600
9986-4665
9986-4700
9986-4765
9986-5000
9986-5065
9986-5200
9986-5265
Page
Cat. #
Page
22
22
22
22
22
22
22
49
49
49
49
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490
139
PREVIOUS
HOME
NEXT
FIND IT
FAXBACK
Thank You
We hope this catalog has helped you in your selection of Altech products. To learn more, please complete
this form and fax it to us. If you prefer to mail it, fold and seal with clear tape, we've provided the postage.
Name
Title
Company
Div./MS
Address
City
State
Phone (
)
Zip
Fax (
)
❑ Please contact me to discuss my application.
Our product(s) are exported.
My company is best classified as a(n):
❑ OEM
❑ Systems Integrator
❑ End User/MRO
❑ Distributor
❑ Contractor
❑ Government/School
❑
❑
In my job, I:
❑ Specify
❑ Recommend
❑ Authorize
❑ Purchase
❑ Other
My primary job function is:
❑ Product Design
❑ Sales/Marketing
❑ System Design
❑ Purchasing
❑ Plant Operations/
❑ Other _________________
Maintenance
❑ Yes
❑ No
Consultant
Other
Which best describes the end-product produced by your firm?
❑ Controls & Instrumentation
❑ Electronic Systems & Components
❑ Transportation Equipment
❑ Electrical Machinery & Equipment
❑ Specialty Machinery & Equipment
❑ Other
Which industry(ies) does your company serve? (Please check all applicable)
❑ Aerospace
❑ Automatic Vending
❑ Agricultural
❑ Automotive
❑ Chemical Processing
❑ Commercial
Industrial & HVAC
❑ Construction
❑ Dairy
❑ Defense/Military
❑ Food Processing
❑ Industrial Process
Furnaces & Ovens
❑ Machine Tool
❑ Material Handling
❑ Medical & Dental
❑ Metalworking
❑ Mining
❑ Oil & Gas Field
❑ Packaging
❑ Petrochemical
Please rush literature on products circled below:
CIRCUIT BREAKERS
TERMINAL BLOCKS
❑ Miniature DIN
❑ DIN Rail
❑ Motor Controllers
❑ Mini DIN Rail
❑ Earth Leakage
❑ Panel
❑ Accessories
❑ Eurostrips®
❑ Power Busbar
❑ Ceramic
❑
❑
❑
Busbar System
PCB - Fixed
PCB - Pluggable
INTERFACES
❑
Interface Modules
ENCLOSURES
❑ Industrial
❑ Electronic
❑ DIN
❑ Strain Reliefs
❑ Pharmaceutical
Processing
❑ Power Distribution
Producing
❑ Primary Metals
❑ Printing & Textiles
SENSORS
❑ Proximity Sensors
In
❑
❑
❑
❑
Addition:
Inductive Proximity
Capacitive Proximity
Photoelectric Proximity
Ultrasonic Proximity
❑ Pulp & Paper
❑ Specialty
Chemicals
❑ Textiles
OTHER
❑ Foot Switches
❑ Disconnect Switches
❑ European Fuses
❑ Safety Relays
❑ Safety Modules
❑ Timers
❑ Monitoring and
Sensing Devices
Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • FAX (908) 806-9490