Battery Backup Enclosures with VRLA Batteries Compact and fully enclosed improve safety and maintenance, transmit information on the temperature and type of included valve-regulated acid batteries. They save space and improve the efficiency of the DC UPS. Cat. No. Output Protection Current Dimensions h x w x d (mm) Weight kg (approx.) BAT-1.2VRLA 24V - 1.2Ah 25 A fuse 62 x 175 x 120 1.5 BAT-3.4VRLA BAT-7.2VRLA 24V - 3.2Ah 24V - 7.2Ah 25 A fuse 25 A fuse 82 x 200 x 160 145 x 210 x130 3 5.5 BAT-12VRLA 24V - 12Ah 25 A fuse 210 x 210x210 9 Battery Housing Without Batteries Compact and fully enclosed improve safety and maintenance, transmit information on the temperature and type of batteries. They save space and improve the efficiency of the DC UPS. Size for 24 VDC: 1.2 Ah, 3 Ah, 7.2 Ah and 12 Ah, batteries are not included. Cat. No. Battery Type 2x 12V/1.2AH 2x 12V/3.4AH 2x 12V/7.2AH 2x 12V/12AH BTH-1.2 BTH-3.4 BTH-7.2 BTH-12 Protection Current 25 A fuse 25 A fuse 25 A fuse 25 A fuse Dimensions h x w x d (mm) 62 x 175 x 120 82 x 200 x 160 145 x 210 x130 210 x 210x210 Weight kg (approx.) 0.5 0.9 1.5 1.9 Battery Holders Battery holders for DC UPS system is used in conjunction with a 12 or 24V CBI system. They are designed for maintenance free lead acid batteries (batteries are not included) and protected with a fuse. Units can be installed on a standard 35 mm din rail or wall mounted with a M4 type screw (screws not included). Cat. No. Photo shown with batteries. Please consult Altech for units with battery options. BTM-123 BTM-123D BTM-127 BTM-127D BTM-1212 Battery Size AH 12V/3.2Ah 12V/3.2Ah 12V/7.2Ah 12V/7.2Ah 12V/12Ah Protection A 25A fuse 25A fuse 25A fuse 25A fuse 25A fuse Dimensions WxHxD (mm) 105x136x90 105x136x90 105x153x123 105x153x123 170x153x123 Weight KG (with battery) 1.6 1.6 2.4 2.4 3.5 Mounting M4 SCREW DIN RAIL M4 SCREW DIN RAIL M4 SCREW BTM-241 BTM-241D BTM-243 BTM-243D BTM-247 BTM-247D BTM-2412 2 x 12V/1.2Ah 2 x 12V/1.2Ah 2 x 12V/3.2Ah 2 x 12V/3.2Ah 2 x 12V/7.2Ah 2 x 12V/7.2Ah 2 x 12V/12Ah 25A fuse 25A fuse 25A fuse 25A fuse 25A fuse 25A fuse 25A fuse 170x102x80 170x102x80 170x136x90 170x136x90 170x153x123 170x153x123 235x153x123 1.4 1.4 3.1 3.1 4.7 4.7 7.9 M4 SCREW DIN RAIL M4 SCREW DIN RAIL M4 SCREW DIN RAIL M4 SCREW Battery Selection Chart BUFFERING (MINUTE) TIME Battery Type 1.2 Ah 3 Ah 7.2 Ah 12 Ah Load 1.5 A 20 60 200 400 Load 3 A 8 30 120 240 Load 5 A 3 15 55 100 Load 7.5 A 2 10 30 60 Load 10 A No 7 20 45 Load 12 A No 3 12 30 Load 15 A No No 9 20 Load 20 A No No 7 13 For the latest on Altech Power Supply specifications please visit www.altechcorp.com/power. 198 Ultra Capacitor Modules Traditional lead-acid batteries rely on aging technology and toxic chemicals for energy storage. While adequate for many applications, they have limitations for emerging applications that require safe, dependable, quick-back up power, over long periods of time. Ultracapacitors in DC-UPS applications, ensure that critical information and functions are available when supply voltage dips, sags, drops out or surges, or during a battery changeover. Working in conjunction with a complementary power supply, Ultracapacitors modules reliably supply energy in peak power demand conditions, short power outages and reducing stress on the primary power supply and extending its usable life. Benefits: · Environmentally safe · No toxic chemicals · Virtually maintenance free · Lasts up to 15 years** · Operating temperature range -40°C to +65°C · Higher energy vs. electrolytic capacitors · Higher power vs. batteries · Resists shock and vibration C-TEC Ultra capacitor module The DC- buffer module of the series C-TEC works with ultra-capacitors as energy storage inside the housing. These capacitors are charge by a external regulated DC-power supply in normal operation. In case of an interruption of the DC-power supply the energy of the capacitors is released. The load is supplied by the buffer module till it is discharged. The back-up time depends on the state of charge of the capacitors and on the discharge current. Cat. No. C-TEC 2403-1 C-TEC 2405-5 C-TEC 2410-10 C-TEC 2420-8 C-TEC 2440-4P prim. V 24 24/12 24/12 24 24 sec. V 24 24/12 24/12 24 24 output A 3 5 10 20 40 imax* A 6 7 10 20 40 energy Ws 1000 5000 10000 8000 4000 AC-TEC 2403-1 AC-TEC 2420-8 115 – 230 VAC 3 x 340 – 550 VAC 24 24 3 20 1.5xIA 1.5xIA 1000 8000 dimensions weight h x w x d (mm) kg 92,5x60x116 0.55 163x114x145 1.8 163x114x145 2.1 192x84x192 1.8 192x84x198 2.0 152,5 x 72 x 130 0.85 192,5 x 140 x 198 0.55 Capacitor Extension Module The CEM-Module is used to increase the back-up energy of the C-TEC series. The charging and discharging of the extension module is monitored and controlled by the C-TEC. Cat. No. CEM 1 CEM 2 CEM 8 CEM 16 nominal voltage V DC 24 24 24 24 sec. V DC 24 24 24 24 output A 3 3 20 20 imax* energy A Ws 3 1kJ, 1000Ws 3 2kJ, 2000Ws 20 8kJ, 8000Ws 20 16kJ, 16000Ws dimensions h x w x d (mm) 92,5x60x116 92,5x60x116 192x84x192 192x84x192 weight kg 0.85 1 1.4 1.9 AKKUTEC DC-UPS Buffer Unit (without batteries) The battery buffered DC power supply is working according the stand-by parallel mode and ensures in connection with a lead-acid battery a safe continuous DC power supply during a determined time interval in case of mains failure. The total output current is shared between supply of the loads and charging of the buffer unit. Cat. No. AKKUTEC 2402 AKKUTEC 2405 AKKUTEC 2412 AKKUTEC 2440 prim. V 115 - 230 115-230 230 3x400 sec. V 24 24 24 24 output A 2 5 12 44 dimensions h x w x d (mm) 60x92,5x116 160x75x150 155x95x183 180x290x150 weight kg 0.55 1 0.4 3.3 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 199