wi 32 th Po Gr le ou nd E3 07 10 5 Component Parts Pre-Assembled Units Covers Bulkhead Housing FEMALE 29022 (1-16) Insert 29046 403050 Hood 29660 29026 (17-32) Standard Part Numbers are NPT threads. Part numbers with an “M” are metric thread. Top Entry 29062 29062M Side Entry 29063 29063M Top Entry 403056 403056M Side Entry 403057 403057M MALE 29023 (1-16) Insert Hood 29027 (17-32) 18 Top Entry 29060 29060M Side Entry 29061 29061M Top Entry 403054 403054M Side Entry 403055 403055M Connectors should not be coupled and decoupled under electrical load. Altech Corp.¤ ¥ (908) 806-9400 ¥ www.altechcorp.com 29662 Inserts Number of contacts Electrical data to DIN EN61 984 Current Voltage Rated Impulse Voltage Insulation Resistance Temperature Range Flammability Contacts Screw terminal Material Surface plated Contact resisitance Wire size Torque Stripping Length 32 Pole w/ ground 16A 400V 6KV 3 16A 400V 6KV ≥1010 Ω -40 to 125°C UL94-VO Metal Hoods & Housings Material Surface Seals Degree of Protection Acc To DIN EN60529 for coupled connectors Thread Size Copper alloy hard-silver ≤ 1m Ω 2.5mm2 / 14 AWG 0.5Nm 7.5mm Aluminum Powder coated NBR IP65 NPT 3/4” or M40 E307105 5.5 28.5 92 15.5 103 Ø4.5 115.5 15.5 60 80.5 12 77.5 29046 27 84 34 93.5 17.3 1.2 33.5 M3x10 NPT 3/4 or M40 43 29660 73.5 29022 29026 26.5 93.5 78 26.5 29062 1.2 17.3 32.5 27 34 29023 29027 78 93.5 92 29061 Connectors should not be coupled and decoupled under electrical load. All dimensions are shown in millimeters. To convert to inches divide by 25.4. Altech Corp.¤ ¥ (908) 806-9400 ¥ www.altechcorp.com 29662 SP EC IF wi 32 ICA th Po TI Gr le O NS ou nd M3x10 84 70 /4 NPT 340 or M 77.5 147 32 19