Surge Suppressor CDL4U(E)MOV1 MOV CDL4U(E)RC CDL4U(E)SD RC Circuit Suppressor Diode 12 mm 18 mm 12 mm 54 x 55.5 mm 54 x 55.5 mm 54 x 55.5 mm 9 mm 9 mm 9 mm Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 4 screw clamps 4 screw clamps 4 screw clamps 22-10 AWG 22-10 AWG 22-10 AWG 250 V AC / 630 V DC 12-48V DC / 12-160V AC** – 20A 1.5 KA 2kA-6.5kA (8/20µs) – – <25ns – 1 ns DC / 5 ns AC – – – 0.1 µf or 0.22 µf – For protection of DC solenoid valves and contactors For fine protection of data interfaces, sensors, contacts, etc. 30, 60, 75, 130, 275, 460, 510, 625, 680 V AC 100-20,000 pf For protection from voltage surge, spikes Cat. No. CDL4U(E)MOV30V CDL4U(E)MOV60V CDL4U(E)MOV75V CDL4U(E)MOV130V CDL4U(E)MOV275V CDL4U(E)MOV460V CDL4U(E)MOV510V CDL4U(E)MOV625V CDL4U(E)MOV680V Std. Pk. 20 20 20 20 20 20 20 20 20 Cat. No. CDL4U(E)RC0.1 CDL4U(E)RC0.22 Std. Pk. 20 20 Cat. No. Std. Pk. CDL4U(E)SDUA15V CDL4U(E)SDUA24V CDL4U(E)SDUA48V CDL4U(E)SDUK15V CDL4U(E)SDUK24V CDL4U(E)SDUK48V CDL4U(E)SDB15V CDL4U(E)SDB24V CDL4U(E)SDB48V CDL4U(E)SDB160V 20 20 20 20 20 20 20 20 20 20 EPCDL4U 50 EPCDL4U 50 EPCDL4U 50 CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 MT2 100 MT2 100 MT2 100 SDUA SDB Note: CDL4U(E)SDU - For D.C. Application CDL4U(E)SDB - For A.C. Application A - Anode K - Cathode SDUK 1 A fuse block is recommended to protect MOV terminals by disconnecting the faulted varistor. See pages 21-25 for fuse blocks. ** Phase to Phase / Phase to ground. Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 49