PS-S20 Series Specifications OUTPUT Features: • • • • • • • • • Universal AC input / full range Protections: Short Circuit / Overload / Overvoltage Cooling by free air convection DIN rail mountable Built in DC OK active signal LED indicator for power on No load power consumption < 0.75W 100% full load burn-in test 3 year warranty Cat. No. PS-S2005 PS-S2012 PS-S2015 PS-S2024 DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER RIPPLE & NOISE (max) 5V 3A 0~3A 15W 80mVp-p 12V 1.67A 0~1.67A 20W 120mVp-p 15V 1.34A 0~1.34A 20W 120mVp-p 24V 1A 0~1A 24W 150mVp-p Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1µF & 47µF parallel capacitor VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE 4.75 ~ 5.5V ±2.0% 10.8 ~ 13.2V ±1.0% 13.5 ~ 16.5V ±1.0% 21.6 ~ 26.4V ±1.0% Tolerance: includes set up tolerance, line regulation and load regulation. LINE REGULATION LOAD REGULATION SETUP, RISE TIME ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% 500ms, 30ms/230VAC; 1000ms, 30ms/115VAC at full load ±1.0% ±1.0% Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time. INPUT HOLD UP TIME (Typ.) 50ms/230VAC; 20ms/115VAC at full load PROTECTION VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (max.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT 85~264VAC 120~370VDC 47~63Hz 76% 80% 0.55A/115VAC; 0.35A/230VAC COLD START: 20A/115VAC; 40A/230VAC ≤1mA/ 240VAC OVERLOAD PROTECTION 81% 84% 105% ~ 160% rated output power Protection type: Constant current limiting, recovers automatically after fault condition is removed OVERVOLTAGE PROTECTION 5.75~6.75V 13.8~16.2V 17.25~20.25V 27.6~32.4V Protection type: Shut down overvoltage, re-power on to recover OVER TEMPERATURE PROTECTION ENVIRONMENT SAFETY & EMC DC OK AKTIV SIGNAL (max.) Power supply shut down at 70˚C constant current limiting / output voltage goes to 0; re-power on to recover 3.75~6V (50mA) 9~13.5V (40mA) 11.5~16.5V (40mA) 18~27V (20mA) WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION MOUNTING -20 ~ +70˚C (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85˚C, 10 ~ 95% RH ±0.03% ˚C (0 ~ 50˚C) Component: 10 ~ 500Hz, 2G 10min. / 1cycle, 60 min. each long X,Y, Z axes Compliance to IEC60068-2-6 SAFETY STANDARDS UL508 EN60950-1 compliant I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC Compliance to EN55011 EN55022 (CISPR22) EN61204-3 Class B Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; EN55024; ENV50204; EN61000-6-1;EN61204-3; light industry level; criteria A WITHSTAND VOLTAGE ISOLATION RESISTANCE EMI CONDUCTION & RADIATION HARMONIC CURRENT EMS IMMUNITY The power supply is considered a component which will installed into a final equipment. The final equipment must be re-confirmed OTHERS that it still meets EMC directives. MTBF DIMENSION PACKING 236.9K hrs min. MIL-HDBK-217K (25˚C) 22.5x90x100mm (WxHxD) 0.19Kg; 72pcs / 14.7Kg / 0.91CUFT All parameters NOT specially mentioned are measured at 230V AC input, rated load and 25˚C of ambient temperature For the latest on Altech Power Supply specifications please visit www.altechcorp.com/power. 64 Mechanical Specification 100 22.5 5 5 +V -V DC OK Terminal Pin. No Assign. (TB1) Assignment FG AC/N AC/L + +V ADJ 90 Pin No. 1 2 3 Terminal Pin. No Assign. (TB2) Pin No. Assignment 4 DC OUTPUT +V DC OUTPUT -V 5 DC OK SIGNAL 6 N L 5 5 Block Diagram RECTIFIERS & FILTER EMI FILTER I/P POWER SWITCHING RECTIFIERS & FILTER +V -V DETECTION CIRCUIT CONTROL O.L.P. O.V.P. Application of DC OK Signal Model 5V 12V 15V 24V R 5.1V R 200 1.5K 2K 3.9K R Model 5V 12V 15V 24V R 1K 2.4K 3K 4.7K Relay V- V- Model 5V 12V 15V 24V RL RL 120 700 700 1.2K V- Derating Curve Output Derating VS Input Voltage Ta=25 100 100 90 80 80 70 60 60 40 50 20 -20 40 0 10 20 30 40 50 60 70 (VERTICAL) 85 95 100 115 120 140 160 180 200 220 240 264 Note: All dimensions are in millimeters, to convert to inches multiply by 0.03937. Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 65