Model PD1722J5050S3HF

Model PD1722J5050S3HF
Rev A
Ultra Low Profile 0805 Power Divider
3 Way 50Ω to 50Ω
Description
The PD1722J5050S3HF is a low profile, sub-miniature Wilkinson power
divider in an easy to use surface mount package and is ideal for high
volume manufacturing while delivering higher performances than traditional
printed and lumped element solutions. It has been designed for the DCS,
PCS, UMTS and CDMA markets. The PD1722J5050S3HF is matched to
50 Ω and has a height profile of 0.82 mm. Three external resistors are
required for operation. Components are available on tape and reel for high
volume manufacturing pick and place.
Detailed Electrical Specifications: Specifications subject to change without notice.
ROOM (25°°C)
Features:
•
•
•
•
•
•
•
•
•
•
•
1700 – 2200 MHz
0.82 mm Height Profile
50Ω Outputs/Inputs
DCS/PCS/UMTS/CDMA
External resistors required
Low Insertion Loss
Surface Mountable
Tape & Reel
Non-conductive Surface
RoHS Compliant
Halogen Free
Parameter
Min.
Frequency
Input Port Impedance
Output Port Impedance
Return Loss
Insertion Loss*
Amplitude Balance
Phase Balance
Isolation (Output Ports)
Power Handling
Operating Temperature
1700
Typ.
50
50
11
0.9
0.5
9
17
9
14
Max
Unit
2200
MHz
Ω
Ω
dB
dB
dB
Degrees
dB
Watts
ºC
1.3
0.9
12
1
+85
-55
* Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC)
Outline Drawing
TOP VIEW (Near Side)
SIDE VIEW
BOTTOM VIEW (Far Side)
4x 0.37
2.04±0.10
0.82±0.08
1
3
2
2x 0.15
1.29±0.10
6x 0.98
Orientation Marker
Denotes Pin Location
Orientation Marker
Denotes Pin Location
Mechanical Outline
-Dimensions are in Millimeters
Pin
1
2
3
4
5
6
6x
0.22
6
5
4
4x 0.65
6x
0.30
Designation
GND
Input
Output 1
Output 2
GND
Output 3
Visit us at
www.anaren.com
USA/Canada:
Toll Free:
Europe:
Asia:
(315) 432-8909
(800) 411-6596
+44 2392-232392
+86 512-62749282
Model PD1722J5050S3HF
Rev A
Typical Broadband Performance: 500 MHz. to 8.5 GHz.
Return Loss - Input
Insertion Loss
0
0
-3
-3
-6
-6
-9
-9
-12
-12
-15
-18
[dB]
-21
-18
-21
-24
-24
-27
-27
-30
-30
-33
-33
5500
6000
6500
7000
7500
8000
8500
5500
6000
6500
7000
7500
8000
8500
5000
4500
4000
3500
3000
2500
2000
500
Frequency [MHz]
1500
-36
8500
8000
7500
7000
6500
6000
5500
5000
4500
4000
3500
3000
2500
2000
1500
1000
500
-36
1000
[dB]
-15
Frequency [MHz]
Phase Balance
1.500
15.0
1.000
10.0
0.500
5.0
Frequency [MHz]
5000
4500
4000
3500
3000
2500
2000
8500
8000
7500
7000
6500
6000
5500
5000
4500
1000
4000
-20.0
3500
-15.0
-2.000
3000
-10.0
-1.500
2500
-1.000
2000
-5.0
1500
-0.500
1500
0.0
1000
0.000
500
deg
20.0
500
[dB]
Amplitude Balance
2.000
Frequency [MHz]
Isolation
0
-3
-6
-9
-12
-18
-21
-24
-27
-30
-33
8500
8000
7500
7000
6500
6000
5500
5000
4500
4000
3500
3000
2500
2000
1500
1000
-36
500
[dB]
-15
Frequency [MHz]
Visit us at
www.anaren.com
USA/Canada:
Toll Free:
Europe:
Asia:
(315) 432-8909
(800) 411-6596
+44 2392-232392
+86 512-62749282
Model PD1722J5050S3HF
Rev A
Typical Performance: 1600 MHz. to 2300 MHz.
Return Loss
0
Insertion Loss
0.0
-3
-0.3
-6
-0.6
-9
-0.9
-12
-1.2
-1.5
-18
[dB]
-21
-1.8
Amplitude Balance
1.5
15.0
1.0
10.0
0.5
5.0
2300
2200
2300
2200
2100
2000
1900
-20.0
2300
-2.0
2200
-15.0
2100
-1.5
2000
-10.0
1900
-5.0
-1.0
1800
-0.5
1800
0.0
1700
0.0
1600
deg
20.0
1700
2100
Phase Balance
2.0
1600
2000
Frequency [MHz]
Frequency [MHz]
[dB]
1900
1800
2300
2200
2100
2000
-3.6
1900
-3.3
-36
1800
-3.0
-33
1700
-2.7
-30
1600
-2.4
-27
1700
-2.1
-24
1600
[dB]
-15
Frequency [MHz]
Frequency [MHz]
Isolation
0.00
-3.00
-6.00
-9.00
-12.00
-18.00
-21.00
-24.00
-27.00
-30.00
-33.00
2300
2200
2100
2000
1900
1800
1700
-36.00
1600
[dB]
-15.00
Frequency [MHz]
Visit us at
www.anaren.com
USA/Canada:
Toll Free:
Europe:
Asia:
(315) 432-8909
(800) 411-6596
+44 2392-232392
+86 512-62749282
Model PD1722J5050S3HF
Rev A
Mounting Configuration:
In order for Xinger surface mount components to work optimally, the proper impedance transmission lines must be
used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet
published specifications.
All of the Xinger components are constructed from organic PTFE based composites which possess excellent
electrical and mechanical stability. Xinger components are compliant to a variety of ROHS and Green standards and
ready for Pb-free soldering processes. Pads are Gold plated with a Nickel barrier.
An example of the PCB footprint used in the testing of these parts is shown below. In specific designs, the
transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying
pick and place equipment tolerances. In addition, since the PD1722J5050S3HF is a Wilkinson power divider,
external 0402 100Ω resistors must be mounted as shown in the Figure below.
Pad Footprint w/ 0402 Resistor Locations
Circuit Pattern
Dimensions are in Millimeters
Mounting Footprint
Footprint Pad (s)
Solder Resist
4x
Transmission
lines
R2
R1
.66
R3
.04
6x .33
Plated thru
holes to ground
6x .41
4x .25
Visit us at
www.anaren.com
USA/Canada:
Toll Free:
Europe:
Asia:
(315) 432-8909
(800) 411-6596
+44 2392-232392
+86 512-62749282
Model PD1722J5050S3HF
Rev A
Packaging and Ordering Information
Parts are available in reels and are packaged per EIA 481-2. Parts are oriented in tape and reel as shown below. Minimum order
quantities are 4000 per reel. See Model Numbers below for further ordering information.
1.00
2.00
4.00
1.75
3.50
8.00
1.60
4.00
2.41
.25
Visit us at
www.anaren.com
USA/Canada:
Toll Free:
Europe:
Asia:
(315) 432-8909
(800) 411-6596
+44 2392-232392
+86 512-62749282