For more information, please visit the product page. date 09/22/2014 page 1 of 6 SERIES: PLDA40 │ DESCRIPTION: LED DRIVER FEATURES • • • • • • • • up to 40 W continuous power universal input range (90~305 Vac) single output dimming options: PWM, 1~10 Vdc, resistive, DALI power factor correction ≥ 0.9 constant current low profile for easy installation IP67 rated MODEL • over voltage, continuous short circuit, and over temperature protection • UL 8750, IEC/EN61347-2-13 approval • EN61000-3-2 Class C (harmonic current) approval • efficiency up to 88% • suitable for LED lighting and signage applications output voltage range1 output current output power ripple and noise2 efficiency min (Vdc) max (Vdc) (mA) max (W) max (mVp-p) typ (%) PLDA40-840-277 9 48 840 40.32 480 88 PLDA40-1110-277 9 36 1110 40 360 86 PLDA40-1700-277 9 24 1700 40.8 240 86 Notes: 1. constant current region 2. ripple and noise are measured at 20MHz bandwidth with a 0.1uF ceramic capacitor and 10uF aluminum capacitor. PART NUMBER KEY PLDA40 - XXXX - 277XXX Base Number IP Rating “blank” = IP64 A = IP67 Output Current Dimming PE = PWM, 1~10 Vdc, resistive D = DALI “blank” = no dimming Input Voltage 277 = (90~305 Vac) cui.com For more information, please visit the product page. CUI Inc │ SERIES: PLDA40 │ DESCRIPTION: LED DRIVER date 09/22/2014 page 2 of 6 INPUT parameter conditions/description min voltage frequency current at 115 Vac, full load at 230 Vac, full load inrush current at 240 Vac, cold start, 25°C, after 100 μs leakage current at 277 Vac power factor correction at 115 Vac/230 Vac, 75~100% load max units 90 127 typ 305 420 Vac Vdc 50 60 Hz 0.45 0.22 A A 5 A 0.75 mA 1 W max units 0.9 no load power consumption OUTPUT parameter conditions/description min current line regulation measured from high line to low line at full load ±5 % current load regulation measured from min. to max. of constant current region ±5 % constant current accuracy at nominal input and full load ±5 % switching frequency start-up time typ 60 at 90 Vac kHz 0.5 temperature coefficient ±0.05 s %/°C PROTECTIONS parameter conditions/description over voltage protection TVS clamp short circuit protection hiccup mode, auto recovery min over temperature protection typ max 105 units °C SAFETY & COMPLIANCE parameter conditions/description min isolation voltage input to output, for 1 minute isolation resistance input to output safety approvals UL8750, IEC/EN61347-1, IEC/EN61347-2-13, PSE DALI IEC62386-102, IEC62386-207 EMI/EMC FCC Part 15 Class B/EN55015, EN61547, EN61000-4-(2,3,4,5), EN61000-3-2 Harmonic Class C, EN61000-3-3 MTBF as per MIL-HDBK-217F, at 25°C RoHS 2011/65/EU typ max units 3,750 Vac 100 MΩ 200,000 hours ENVIRONMENTAL parameter conditions/description min operating temperature see derating curves -40 storage temperature -40 operating altitude cui.com typ max units 70 °C 85 °C 3,000 m For more information, please visit the product page. CUI Inc │ SERIES: PLDA40 │ DESCRIPTION: LED DRIVER date 09/22/2014 page 3 of 6 MECHANICAL parameter conditions/description dimensions 6.614 x 1.575 x 0.992 (168 x 40 x 25.2 mm) min typ max units inches weight 350 g MECHANICAL DRAWING MODELS WITHOUT DIMMING units: inches[mm] tolerance: ±0.02[±0.5] unless otherwise specified INPUT WIRE CONNECTIONS 7.008[178.00] Function Black ACL White ACN OUTPUT WIRE CONNECTIONS Function Red +Vo Black -Vo 0.393[10.00] 0.393[10.00] INPUT ACL Black ACN White 0.393[10.00] OUTPUT Red UL 1015 16AWG Black +V0 -V0 0.393[10.00] UL 1015 18AWG 7.677[195.00]±0.787[20.00] 7.874[200.00]±0.787[20.00] 8.071[205.00]±0.787[20.00] 0.992[25.20] Color 0.138[3.50] Color 1.575[40.00] MODELS WITH DIMMING units: inches[mm] tolerance: ±0.02[±0.5] unless otherwise specified INPUT WIRE CONNECTIONS ACL White ACN 0.472[12.00] Function 0.787[20.00] Black ACL Color Function Red +Vo Black -Vo Blue1 D+/DA+ White1 D-/DA- White ACN 0.787[20.00] INPUT 0.394[10.00] OUTPUT UL 2464 16AWG+22AWG UL 2464 18AWG 11.811[300.00]±0.787[20.00] 11.811[300.00]±0.787[20.00] 0.992[25.20] OUTPUT WIRE CONNECTIONS 6.614[168.00] 0.138[3.50] Color Black 7.402[188.00] Note: 1. DALI models are marked with “DA” 0.433[11.00] 1.575[40.00] cui.com 22AWG Blue D+ 22AWG White D- (Optional) 16AWG Red +Vo 16AWG Black -Vo 0.394[10.00] For more information, please visit the product page. CUI Inc │ SERIES: PLDA40 │ DESCRIPTION: LED DRIVER date 09/22/2014 page 4 of 6 DERATING CURVES Temperature Derating Curve PF vs. Output Current 1.00 100 0.95 80 0.90 THD vs. Output Current 25% 60 9$& THD Safe operating area 0.85 PF Load (%) 20% 50 40 0.80 20 0.75 -40 -20 0 20 40 50 60 70 80 100 0.70 50% 9$& 15% 9$& 10% 9$& 60% 70% Ambient Temperature (°C) 80% 90% 100% Output Current 5% 50% 60% 70% 80% 90% 100% Output Current EFFICIENCY CURVES Efficiency vs. Output Current (PLDA40-840-277PE, with dimming) Efficiency Efficiency 9 9 9 9 9 Output Current 9 9 Efficiency vs. Output Current (PLDA40-1700-277PE, with dimming) Efficiency 9 Efficiency vs. Output Current (PLDA40-1110-277PE, with dimming) 9 9 9 9 Output Current 9 cui.com 9 Output Current 9 For more information, please visit the product page. CUI Inc │ SERIES: PLDA40 │ DESCRIPTION: LED DRIVER date 09/22/2014 page 5 of 6 APPLICATION NOTES 1. Dimming Dimming should be controlled from the dimming controller with DALI, PWM, 1~10 Vdc, or resistive. Set the DALI controller to “broadcast mode” when connecting to the LED driver, since it will not be addressed in production. +Vo (RED) ACL (BLACK) AC LED DRIVER -Vo (BLACK) D+/DA (BLUE) ACN (WHITE) D-/DA (WHITE) Dimming Controller 1~10 Vdc Dimming Voltage 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V (Open) 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Potentiometer 1K 2K 3K 4K 5K 6K 7K 8K 9K 10K (Open) Output Current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Duty Cycle 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% (Open) Output Current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Output Current Potentiometer Dimming PWM Dimming (@ 1kHz, 10V) Note: 1. All specifications are measured at Ta=25°C, 115/230 Vac input voltage, and full load unless otherwise specified. cui.com For more information, please visit the product page. CUI Inc │ SERIES: PLDA40 │ DESCRIPTION: LED DRIVER date 09/22/2014 page 6 of 6 REVISION HISTORY rev. 1.0 description date initial release 09/22/2014 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com [email protected] CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.