For more information, please visit the product page. date 05/13/2015 page 1 of 3 SERIES: SD-XXJ │ DESCRIPTION: STANDARD DIN CONNECTOR FEATURES • plastic bushing • strain relief • 3~13 pin options RoHS PART NUMBER KEY SD - XX J Base Number Pin Options 30 = 3 pins 40 = 4 pins 50 = 5 pins 52 = 5 pins 60 = 6 pins 70 = 7 pins 80 = 8 pins 81 = 8 pins 130 = 13 pins SPECIFICATIONS parameter conditions/description min rated input voltage max 100 rated input current contact resistance insulation resistance at 500 Vdc voltage withstand at 50/60Hz for 1 minute -5 2011/65/EU cui.com units Vac 2 A 50 mΩ 100 operating temperature RoHS typ MΩ 1,000 Vac 110 °C For more information, please visit the product page. CUI Inc │ SERIES: SD-XXJ │ DESCRIPTION: STANDARD DIN CONNECTOR date 05/13/2015 │ page 2 of 3 MECHANICAL DRAWINGS units: mm[inches] tolerance: ±0.1mm 35.5 1.398 11.8 0.465 MATERIAL PLATING pins brass silver shell steel nickel insulator (30~80, 130) PC insulator (81) ABS boot (30~80, 130) EVA boot (81) PE 24.5 0.965 15.8 0.622 0.7 0.028 7 3 8 5 6 1 4 2 45° 6.5 0.256 SD-30J 3 SD-40J 4 1 1 3 2 SD-50J 3 2 SD-52J 4 1 5 1 5 3 4 SD-60J 5 2 7 3 5 SD-80J 0.7 0.028 6 1 4 7 3 5 SD-81J 0.9 0.035 6 1 7 3 8 5 4 2 2 45° 8 60° 45° 45° SD-70J 45° cui.com SD-130J 41° 6 1 4 2 45° 2 6 3 2 72° 1 4 2 3 4 1 5 6 7 8 12 9 10 11 13 For more information, please visit the product page. CUI Inc │ SERIES: SD-XXJ │ DESCRIPTION: STANDARD DIN CONNECTOR date 05/13/2015 │ page 3 of 3 REVISION HISTORY rev. description date 1.0 initial release 02/23/2006 1.01 new template applied 02/22/2012 1.02 corrected center pin positioning on SD-80J and SD-81J 10/01/2013 updated datasheet 05/13/2015 1.03 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com [email protected] CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.