ds XHP35

CLD-DS130 Rev 1
Product family data sheet
Cree® XLamp® XHP35 LEDs
XHP35 High Density LED
XHP35 High Intensity LED
Product Description
FEATURES
Table of Contents
The XLamp® XHP35 LED brings the
• Available in white in high‑density and
Characteristics...............................................2
performance of Cree’s Extreme High
high‑intensity versions for design
Flux Characteristics, High Density
Power LEDs to the XP footprint, setting a
flexibility
EasyWhite® Order Codes and Bins................3
new standard for performance delivered
Flux Characteristics, High Density ANSI
• XHP35 High Intensity LED is
by a 3.45 x 3.45 mm LED. Leveraging the
optimized to deliver maximum
White Order Codes and Bins.........................5
breakthrough 12‑V monolithic power die
candela through secondary optics
Flux Characteristics, High Intensity
built on Cree’s innovative architecture and
• Available in 5-step EasyWhite bins
uniquely enabled by the SC5 Technology™
at 2700 K to 5700 K CCT and 3-step
Flux Characteristics, High Intensity ANSI
Platform, the XHP35 LED allows the
EasyWhite bins at 2700 K to 3500 K
White Order Codes and Bins...................... 11
use of readily available cost‑-optimized
CCT
Relative Spectral Power Distribution......... 15
drivers to unleash the capabilities of
Cree’s high‑power LEDs. Available in both
®
• Available in ANSI white bins at
2700 K to 7000 K CCT
EasyWhite® Order Codes and Bins................8
Relative Flux vs. Junction Temperature..... 15
Electrical Characteristics............................ 16
high‑density and high‑intensity versions,
• Available in standard, 70-, 80-, 85-
Relative Flux vs. Current............................. 16
the XHP35 LED is application optimized
and 90‑minimum CRI options
Relative Chromaticity vs. Current............... 17
to enable new designs and radically lower
• Binned at 85 °C
Relative Chromaticity vs. Temperature...... 18
system costs.
• Maximum drive current: 1050 mA
Typical Spatial Distribution......................... 19
• Low thermal resistance: 1.8 °C/W
Thermal Design........................................... 20
• Wide viewing angle: 115° for high
Performance Groups – Luminous Flux..... 20
intensity, 125° for high density
Performance Groups – Chromaticity......... 21
• Unlimited floor life at
≤ 30 ºC/85% RH
• Reflow solderable - JEDEC
J‑STD‑020C
Cree’s EasyWhite® Chromaticity Regions
Plotted on the 1931 CIE Curve................... 24
Cree’s Standard Cool White Kits Plotted
on ANSI Standard Chromaticity Regions... 27
• RoHS and REACh compliant
Cree’s Standard Warm and Neutral White
• UL recognized component
Kits Plotted on ANSI Standard
®
(E349212)
Chromaticity Regions................................. 28
www.cree.com/Xlamp
Bin and Order Code Formats...................... 29
Reflow Soldering Characteristics............... 30
Notes........................................................... 31
Mechanical Dimensions............................. 33
Tape and Reel.............................................. 35
Packaging.................................................... 37
Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and
EasyWhite® are registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered
trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
1
XLamp ® XHP35 LED
Characteristics
Characteristics
Unit
Thermal resistance, junction to solder point
°C/W
1.8
Viewing angle (FWHM) - High Density
degrees
125
Viewing angle (FWHM) - High Intensity
degrees
115
mV/°C
-8
Temperature coefficient of voltage
ESD withstand voltage (HBM per Mil-Std-883D)
Minimum
Typical
Maximum
V
8000
mA
1050
Reverse voltage
V
-5
Forward voltage (@ 350 mA, 85 °C)
V
LED junction temperature
°C
DC forward current
11.3
11.9
150
Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
2
XLamp ® XHP35 LED
Flux Characteristics, High Density EasyWhite® Order Codes and Bins (TJ = 85 °C)
The following table provides order codes for XLamp XHP35 High Density LEDs. For a complete description of how the flux and chromaticity
groups are reflected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section (page 29).
Min
70
5700 K
80
90
70
5000 K
80
90
70
4500 K
Minimum Luminous Flux
@350 mA
CRI
Nominal
CCT
80
90
Typ
3-Step
5-Step
Group
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
E4
635
706
E2
590
656
D4
550
612
D4
550
612
D2
510
567
C4
475
528
C2
440
489
B4
410
456
XHP35A-00-0000-0D0UB457E
E4
635
706
XHP35A-00-0000-0D0BE450E
E2
590
656
D4
550
612
D4
550
612
D2
510
567
C4
475
528
C2
440
489
B4
410
456
E2
590
656
D4
550
612
D4
550
612
D2
510
567
C2
440
489
B4
410
456
Group
Order Code
Group
Order Code
XHP35A-00-0000-0D0BE457E
57E
XHP35A-00-0000-0D0BE257E
XHP35A-00-0000-0D0BD457E
57E
XHP35A-00-0000-0D0HD457E
XHP35A-00-0000-0D0HD257E
XHP35A-00-0000-0D0UC457E
57E
50E
XHP35A-00-0000-0D0UC257E
XHP35A-00-0000-0D0BE250E
XHP35A-00-0000-0D0BD450E
50E
XHP35A-00-0000-0D0HD450E
XHP35A-00-0000-0D0HD250E
XHP35A-00-0000-0D0UC450E
50E
XHP35A-00-0000-0D0UC250E
XHP35A-00-0000-0D0UB450E
45E
45E
45E
XHP35A-00-0000-0D0BE245E
XHP35A-00-0000-0D0BD445E
XHP35A-00-0000-0D0HD445E
XHP35A-00-0000-0D0HD245E
XHP35A-00-0000-0D0UC245E
XHP35A-00-0000-0D0UB445E
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 31).
•
Cree XLamp XHP35 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
*
Flux values @ 25 °C are calculated and are for reference only.
Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
3
XLamp ® XHP35 LED
Flux Characteristics, High Density EasyWhite® Order Codes and Bins (TJ = 85 °C) - Continued
Min
70
4000 K
80
90
70
3500 K
80
90
70
3000 K
Minimum Luminous Flux
@350 mA
CRI
Nominal
CCT
80
90
80
2700 K
90
Typ
Group
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
E2
590
656
D4
550
612
D2
510
567
D4
550
612
D2
510
567
C2
440
489
B4
410
456
E2
590
656
D4
550
612
D2
510
567
D4
550
612
D2
510
567
C4
475
528
C2
440
489
B4
410
456
D4
550
612
D2
510
567
D2
510
567
C4
475
528
C2
440
489
B4
410
456
B2
380
423
C4
475
528
C2
440
489
B4
410
456
B2
380
423
3-Step
Group
Order Code
5-Step
Group
Order Code
XHP35A-00-0000-0D0BE240E
40E
XHP35A-00-0000-0D0BD440E
XHP35A-00-0000-0D0BD240E
40E
40E
XHP35A-00-0000-0D0HD440E
XHP35A-00-0000-0D0HD240E
XHP35A-00-0000-0D0UC240E
XHP35A-00-0000-0D0UB440E
XHP35A-00-0000-0D0BE235E
35E
XHP35A-00-0000-0D0BD435E
XHP35A-00-0000-0D0BD235E
XHP35A-00-0000-0D0HD435G
35G
XHP35A-00-0000-0D0HD235G
XHP35A-00-0000-0D0HD435E
35E
XHP35A-00-0000-0D0HC435G
35G
XHP35A-00-0000-0D0UC235G
XHP35A-00-0000-0D0UB435G
XHP35A-00-0000-0D0HC435E
35E
30E
30G
XHP35A-00-0000-0D0HD230G
XHP35A-00-0000-0D0HC430G
30E
XHP35A-00-0000-0D0UC230G
30G
XHP35A-00-0000-0D0UB430G
27G
XHP35A-00-0000-0D0HC427G
XHP35A-00-0000-0D0HC227G
XHP35A-00-0000-0D0UB427G
XHP35A-00-0000-0D0UB227G
XHP35A-00-0000-0D0UC235E
XHP35A-00-0000-0D0UB435E
XHP35A-00-0000-0D0BD430E
XHP35A-00-0000-0D0BD230E
XHP35A-00-0000-0D0HD230E
XHP35A-00-0000-0D0HC430E
XHP35A-00-0000-0D0UC230E
30E
XHP35A-00-0000-0D0UB230G
27G
XHP35A-00-0000-0D0HD235E
XHP35A-00-0000-0D0UB430E
XHP35A-00-0000-0D0UB230E
27E
27E
XHP35A-00-0000-0D0HC427E
XHP35A-00-0000-0D0HC227E
XHP35A-00-0000-0D0UB427E
XHP35A-00-0000-0D0UB227E
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 31).
•
Cree XLamp XHP35 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
*
Flux values @ 25 °C are calculated and are for reference only.
Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
4
XLamp ® XHP35 LED
Flux Characteristics, High Density ANSI White Order Codes and Bins (TJ = 85 °C)
The following table provides order codes for XLamp XHP35 High Density LEDs. For a complete description of how the flux and chromaticity
groups are reflected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section (page 29).
Nomimal
CCT
7000 K
Minimum Luminous Flux
@ 350 mA
CRI
Chromaticity Regions
0A, 0B, 0C, 0D,
0R, 0S, 0T, 0U,
1A, 1B, 1C, 1D,
1R, 1S, 1T, 1U
Min
Typ
0
68
70
80
90
0
68
70
6500 K
1A, 1B, 1C, 1D
80
90
0
6000 K
1A, 1B, 1C, 1D,
1R, 1S, 1T, 1U,
2A, 2B, 2C, 2D,
2R, 2S, 2T, 2U
70
80
90
68
Group
Flux (lm) Flux (lm)
@ 85 °C @ 25 °C*
Order Code
E4
635
706
XHP35A-00-0000-0D00E40DT
E2
590
656
XHP35A-00-0000-0D00E20DT
D4
550
612
XHP35A-00-0000-0D00D40DT
E4
635
706
XHP35A-00-0000-0D0BE40DT
E2
590
656
XHP35A-00-0000-0D0BE20DT
D4
550
612
XHP35A-00-0000-0D0BD40DT
D4
550
612
XHP35A-00-0000-0D0HD40DT
D2
510
567
XHP35A-00-0000-0D0HD20DT
C4
475
528
XHP35A-00-0000-0D0UC40DT
C2
440
489
XHP35A-00-0000-0D0UC20DT
B4
410
456
XHP35A-00-0000-0D0UB40DT
E4
635
706
XHP35A-00-0000-0D00E40E1
E2
590
656
XHP35A-00-0000-0D00E20E1
D4
550
612
XHP35A-00-0000-0D00D40E1
E4
635
706
XHP35A-00-0000-0D0BE40E1
E2
590
656
XHP35A-00-0000-0D0BE20E1
D4
550
612
XHP35A-00-0000-0D0BD40E1
D4
550
612
XHP35A-00-0000-0D0HD40E1
D2
510
567
XHP35A-00-0000-0D0HD20E1
C4
475
528
XHP35A-00-0000-0D0UC40E1
C2
440
489
XHP35A-00-0000-0D0UC20E1
B4
410
456
XHP35A-00-0000-0D0UB40E1
E4
635
706
XHP35A-00-0000-0D00E40DV
E2
590
656
XHP35A-00-0000-0D00E20DV
D4
550
612
XHP35A-00-0000-0D00D40DV
E4
635
706
XHP35A-00-0000-0D0BE40DV
E2
590
656
XHP35A-00-0000-0D0BE20DV
D4
550
612
XHP35A-00-0000-0D0BD40DV
D4
550
612
XHP35A-00-0000-0D0HD40DV
D2
510
567
XHP35A-00-0000-0D0HD20DV
C4
475
528
XHP35A-00-0000-0D0UC40DV
C2
440
489
XHP35A-00-0000-0D0UC20DV
B4
410
456
XHP35A-00-0000-0D0UB40DV
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 31).
•
Cree XLamp XHP35 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
*
Flux values @ 25 °C are calculated and are for reference only.
Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
5
XLamp ® XHP35 LED
Flux Characteristics, High Density ANSI Order Codes and Bins (TJ = 85 °C) - Continued
Nomimal
CCT
Minimum Luminous Flux
@ 350 mA
CRI
Chromaticity Regions
Min
Typ
0
68
70
5700 K
2A, 2B, 2C, 2D
80
90
0
68
70
5000 K
3A, 3B, 3C, 3D
80
90
0
70
4500 K
4A, 4B, 4C, 4D
80
90
68
Group
Flux (lm) Flux (lm)
@ 85 °C @ 25 °C*
Order Code
E4
635
706
E2
590
656
XHP35A-00-0000-0D00E40E2
XHP35A-00-0000-0D00E20E2
D4
550
612
XHP35A-00-0000-0D00D40E2
E4
635
706
XHP35A-00-0000-0D0BE40E2
E2
590
656
XHP35A-00-0000-0D0BE20E2
D4
550
612
XHP35A-00-0000-0D0BD40E2
D4
550
612
XHP35A-00-0000-0D0HD40E2
D2
510
567
XHP35A-00-0000-0D0HD20E2
C4
475
528
XHP35A-00-0000-0D0UC40E2
C2
440
489
XHP35A-00-0000-0D0UC20E2
B4
410
456
XHP35A-00-0000-0D0UB40E2
E4
635
706
XHP35A-00-0000-0D00E40E3
E2
590
656
XHP35A-00-0000-0D00E20E3
D4
550
612
XHP35A-00-0000-0D00D40E3
E4
635
706
XHP35A-00-0000-0D0BE40E3
E2
590
656
XHP35A-00-0000-0D0BE20E3
D4
550
612
XHP35A-00-0000-0D0BD40E3
D4
550
612
XHP35A-00-0000-0D0HD40E3
D2
510
567
XHP35A-00-0000-0D0HD20E3
C4
475
528
XHP35A-00-0000-0D0UC40E3
C2
440
489
XHP35A-00-0000-0D0UC20E3
B4
410
456
XHP35A-00-0000-0D0UB40E3
E2
590
656
XHP35A-00-0000-0D00E20E4
D4
550
612
XHP35A-00-0000-0D00D40E4
E2
590
656
XHP35A-00-0000-0D0BE20E4
D4
550
612
XHP35A-00-0000-0D0BD40E4
D4
550
612
XHP35A-00-0000-0D0HD40E4
D2
510
567
XHP35A-00-0000-0D0HD20E4
C4
475
528
XHP35A-00-0000-0D0UC40E4
C2
440
489
XHP35A-00-0000-0D0UC20E4
B4
410
456
XHP35A-00-0000-0D0UB40E4
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 31).
•
Cree XLamp XHP35 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
*
Flux values @ 25 °C are calculated and are for reference only.
Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
6
XLamp ® XHP35 LED
Flux Characteristics, High Density ANSI Order Codes and Bins (TJ = 85 °C) - Continued
Nomimal
CCT
4000 K
Chromaticity Regions
5A, 5B, 5C, 5D
Group
E2
590
656
XHP35A-00-0000-0D00E20E5
0
68
D4
550
612
XHP35A-00-0000-0D00D40E5
D2
510
567
XHP35A-00-0000-0D00D20E5
70
70
80
90
70
3000 K
7A, 7B, 7C, 7D
80
90
80
2700 K
Order Code
Typ
90
6A, 6B, 6C, 6D
Flux (lm) Flux (lm)
@ 85 °C @ 25 °C*
Min
80
3500 K
Minimum Luminous Flux
@ 350 mA
CRI
8A, 8B, 8C, 8D
90
E2
590
656
XHP35A-00-0000-0D0BE20E5
D4
550
612
XHP35A-00-0000-0D0BD40E5
D2
510
567
XHP35A-00-0000-0D0BD20E5
D4
550
612
XHP35A-00-0000-0D0HD40E5
D2
510
567
XHP35A-00-0000-0D0HD20E5
C2
440
489
XHP35A-00-0000-0D0UC20E5
B4
410
456
XHP35A-00-0000-0D0UB40E5
E2
590
656
XHP35A-00-0000-0D0BE20E6
D4
550
612
XHP35A-00-0000-0D0BD40E6
D2
510
567
XHP35A-00-0000-0D0BD20E6
D4
550
612
XHP35A-00-0000-0D0HD40E6
D2
510
567
XHP35A-00-0000-0D0HD20E6
C4
475
528
XHP35A-00-0000-0D0HC40E6
XHP35A-00-0000-0D0UC20E6
C2
440
489
B4
410
456
XHP35A-00-0000-0D0UB40E6
D4
550
612
XHP35A-00-0000-0D0BD40E7
D2
510
567
XHP35A-00-0000-0D0BD20E7
D2
510
567
XHP35A-00-0000-0D0HD20E7
C4
475
528
XHP35A-00-0000-0D0HC40E7
C2
440
489
XHP35A-00-0000-0D0UC20E7
B4
410
456
XHP35A-00-0000-0D0UB40E7
B2
380
423
XHP35A-00-0000-0D0UB20E7
C4
475
528
XHP35A-00-0000-0D0HC40E8
C2
440
489
XHP35A-00-0000-0D0HC20E8
B4
410
456
XHP35A-00-0000-0D0UB40E8
B2
380
423
XHP35A-00-0000-0D0UB20E8
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 31).
•
Cree XLamp XHP35 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
*
Flux values @ 25 °C are calculated and are for reference only.
Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
7
XLamp ® XHP35 LED
Flux Characteristics, High Intensity EasyWhite® Order Codes and Bins (TJ = 85 °C)
The following table provides order codes for XLamp XHP35 High Intensity LEDs. For a complete description of how the flux and chromaticity
groups are reflected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section (page 29).
Min
70
5700 K
80
90
70
5000 K
Minimum Luminous Flux
@350 mA
CRI
Nominal
CCT
80
90
Typ
3-Step
5-Step
Group
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
D4
550
612
D2
510
567
C4
475
528
XHP35A-H0-0000-0D0BC457E
D2
510
567
XHP35A-H0-0000-0D0HD257E
C4
475
528
C2
440
489
XHP35A-H0-0000-0D0HC257E
C2
440
489
XHP35A-H0-0000-0D0UC257E
B4
410
456
B2
380
423
A4
355
395
XHP35A-H0-0000-0D0UA457E
D4
550
612
XHP35A-H0-0000-0D0BD450E
D2
510
567
C4
475
528
XHP35A-H0-0000-0D0BC450E
D2
510
567
XHP35A-H0-0000-0D0HD250E
C4
475
528
C2
440
489
XHP35A-H0-0000-0D0HC250E
C2
440
489
XHP35A-H0-0000-0D0UC250E
B4
410
456
B2
380
423
A4
355
395
Group
Order Code
Group
Order Code
XHP35A-H0-0000-0D0BD457E
57E
57E
57E
50E
50E
50E
XHP35A-H0-0000-0D0BD257E
XHP35A-H0-0000-0D0HC457E
XHP35A-H0-0000-0D0UB457E
XHP35A-H0-0000-0D0UB257E
XHP35A-H0-0000-0D0BD250E
XHP35A-H0-0000-0D0HC450E
XHP35A-H0-0000-0D0UB450E
XHP35A-H0-0000-0D0UB250E
XHP35A-H0-0000-0D0UA450E
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 31).
•
Cree XLamp XHP35 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
*
Flux values @ 25 °C are calculated and are for reference only.
Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
8
XLamp ® XHP35 LED
Flux Characteristics, High Intensity EasyWhite® Order Codes and Bins (TJ = 85 °C) - Continued
Min
70
4500 K
80
90
70
4000 K
80
90
70
3500 K
Minimum Luminous Flux
@350 mA
CRI
Nominal
CCT
80
90
Typ
3-Step
5-Step
Group
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
D4
550
612
D2
510
567
C4
475
528
XHP35A-H0-0000-0D0BC445E
D2
510
567
XHP35A-H0-0000-0D0HD245E
C4
475
528
C2
440
489
XHP35A-H0-0000-0D0HC245E
B4
410
456
XHP35A-H0-0000-0D0UB445E
B2
380
423
Group
Order Code
Group
Order Code
XHP35A-H0-0000-0D0BD445E
45E
45E
45E
XHP35A-H0-0000-0D0BD245E
XHP35A-H0-0000-0D0HC445E
XHP35A-H0-0000-0D0UB245E
A4
355
395
XHP35A-H0-0000-0D0UA445E
D4
550
612
XHP35A-H0-0000-0D0BD440E
D2
510
567
C4
475
528
C2
440
489
C4
475
528
C2
440
489
B4
410
456
B2
380
423
A4
355
395
XHP35A-H0-0000-0D0UA440E
D2
510
567
XHP35A-H0-0000-0D0BD235E
C4
475
528
C2
440
489
C4
475
528
C2
440
489
B4
410
456
B2
380
423
A4
355
395
40E
XHP35A-H0-0000-0D0BD240E
XHP35A-H0-0000-0D0BC440E
XHP35A-H0-0000-0D0BC240E
40E
XHP35A-H0-0000-0D0HC440E
XHP35A-H0-0000-0D0HC240E
XHP35A-H0-0000-0D0UB440E
40E
35E
XHP35A-H0-0000-0D0UB240E
XHP35A-H0-0000-0D0BC435E
XHP35A-H0-0000-0D0BC235E
XHP35A-H0-0000-0D0HC435G
35G
XHP35A-H0-0000-0D0HC235G
XHP35A-H0-0000-0D0HC435E
35E
XHP35A-H0-0000-0D0HB435G
35G
XHP35A-H0-0000-0D0UB235G
XHP35A-H0-0000-0D0UA435G
XHP35A-H0-0000-0D0HC235E
XHP35A-H0-0000-0D0HB435E
35E
XHP35A-H0-0000-0D0UB235E
XHP35A-H0-0000-0D0UA435E
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 31).
•
Cree XLamp XHP35 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
*
Flux values @ 25 °C are calculated and are for reference only.
Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
9
XLamp ® XHP35 LED
Flux Characteristics, High Intensity EasyWhite® Order Codes and Bins (TJ = 85 °C) - Continued
Min
70
3000 K
Minimum Luminous Flux
@350 mA
CRI
Nominal
CCT
80
90
80
2700 K
90
Typ
3-Step
5-Step
Group
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
D2
510
567
C4
475
528
C2
440
489
C2
440
489
B4
410
456
B2
380
423
A4
355
395
A2
330
367
XHP35A-H0-0000-0D0UA230G
XHP35A-H0-0000-0D0UA230E
C2
440
489
XHP35A-H0-0000-0D0HC227G
XHP35A-H0-0000-0D0HC227E
B4
410
456
B2
380
423
A4
355
395
A2
330
367
Group
Order Code
Group
Order Code
XHP35A-H0-0000-0D0BD230E
30E
XHP35A-H0-0000-0D0BC430E
XHP35A-H0-0000-0D0BC230E
30G
XHP35A-H0-0000-0D0HC230G
XHP35A-H0-0000-0D0HB430G
30E
XHP35A-H0-0000-0D0UB230G
30G
27G
XHP35A-H0-0000-0D0UA430G
XHP35A-H0-0000-0D0HB427G
XHP35A-H0-0000-0D0UA427G
XHP35A-H0-0000-0D0UA227G
XHP35A-H0-0000-0D0HB430E
XHP35A-H0-0000-0D0UB230E
30E
27E
XHP35A-H0-0000-0D0HB227G
27G
XHP35A-H0-0000-0D0HC230E
XHP35A-H0-0000-0D0UA430E
XHP35A-H0-0000-0D0HB427E
XHP35A-H0-0000-0D0HB227E
27E
XHP35A-H0-0000-0D0UA427E
XHP35A-H0-0000-0D0UA227E
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 31).
•
Cree XLamp XHP35 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
*
Flux values @ 25 °C are calculated and are for reference only.
Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
10
XLamp ® XHP35 LED
Flux Characteristics, High Intensity ANSI White Order Codes and Bins (TJ = 85 °C)
The following table provides order codes for XLamp XHP35 High Intensity LEDs. For a complete description of how the flux and chromaticity
groups are reflected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section (page 29).
Nomimal
CCT
7000 K
Minimum Luminous Flux
@ 350 mA
CRI
Chromaticity Regions
0A, 0B, 0C, 0D,
0R, 0S, 0T, 0U,
1A, 1B, 1C, 1D,
1R, 1S, 1T, 1U
Min
Typ
0
68
70
80
90
0
70
6500 K
1A, 1B, 1C, 1D
80
90
68
Group
Flux (lm) Flux (lm)
@ 85 °C @ 25 °C*
Order Code
D4
550
612
XHP35A-H0-0000-0D00D40DT
D2
510
567
XHP35A-H0-0000-0D00D20DT
C4
475
528
XHP35A-H0-0000-0D00C40DT
D4
550
612
XHP35A-H0-0000-0D0BD40DT
D2
510
567
XHP35A-H0-0000-0D0BD20DT
C4
475
528
XHP35A-H0-0000-0D0BC40DT
D2
510
567
XHP35A-H0-0000-0D0HD20DT
C4
475
528
XHP35A-H0-0000-0D0HC40DT
C2
440
489
XHP35A-H0-0000-0D0HC20DT
B4
410
456
XHP35A-H0-0000-0D0UB40DT
B2
380
423
XHP35A-H0-0000-0D0UB20DT
A4
355
395
XHP35A-H0-0000-0D0UA40DT
D4
550
612
XHP35A-H0-0000-0D00D40E1
D2
510
567
XHP35A-H0-0000-0D00D20E1
C4
475
528
XHP35A-H0-0000-0D00C40E1
D4
550
612
XHP35A-H0-0000-0D0BD40E1
D2
510
567
XHP35A-H0-0000-0D0BD20E1
C4
475
528
XHP35A-H0-0000-0D0BC40E1
D2
510
567
XHP35A-H0-0000-0D0HD20E1
C4
475
528
XHP35A-H0-0000-0D0HC40E1
C2
440
489
XHP35A-H0-0000-0D0HC20E1
B4
410
456
XHP35A-H0-0000-0D0UB40E1
B2
380
423
XHP35A-H0-0000-0D0UB20E1
A4
355
395
XHP35A-H0-0000-0D0UA40E1
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 31).
•
Cree XLamp XHP35 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
*
Flux values @ 25 °C are calculated and are for reference only.
Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
11
XLamp ® XHP35 LED
Flux Characteristics, High Intensity ANSI Order Codes and Bins (TJ = 85 °C) - Continued
Nomimal
CCT
Minimum Luminous Flux
@ 350 mA
CRI
Chromaticity Regions
Min
Typ
0
68
70
6000 K
1A, 1B, 1C, 1D,
1R, 1S, 1T, 1U,
2A, 2B, 2C, 2D,
2R, 2S, 2T, 2U
80
90
0
70
5700 K
2A, 2B, 2C, 2D
80
90
68
Group
Flux (lm) Flux (lm)
@ 85 °C @ 25 °C*
Order Code
D4
550
612
XHP35A-H0-0000-0D00D40DV
D2
510
567
XHP35A-H0-0000-0D00D20DV
C4
475
528
XHP35A-H0-0000-0D00C40DV
D4
550
612
XHP35A-H0-0000-0D0BD40DV
D2
510
567
XHP35A-H0-0000-0D0BD20DV
C4
475
528
XHP35A-H0-0000-0D0BC40DV
D2
510
567
XHP35A-H0-0000-0D0HD20DV
C4
475
528
XHP35A-H0-0000-0D0HC40DV
C2
440
489
XHP35A-H0-0000-0D0HC20DV
C2
440
489
XHP35A-H0-0000-0D0UC20DV
B4
410
456
XHP35A-H0-0000-0D0UB40DV
B2
380
423
XHP35A-H0-0000-0D0UB20DV
A4
355
395
XHP35A-H0-0000-0D0UA40DV
D4
550
612
XHP35A-H0-0000-0D00D40E2
D2
510
567
XHP35A-H0-0000-0D00D20E2
C4
475
528
XHP35A-H0-0000-0D00C40E2
D4
550
612
XHP35A-H0-0000-0D0BD40E2
D2
510
567
XHP35A-H0-0000-0D0BD20E2
C4
475
528
XHP35A-H0-0000-0D0BC40E2
D2
510
567
XHP35A-H0-0000-0D0HD20E2
C4
475
528
XHP35A-H0-0000-0D0HC40E2
C2
440
489
XHP35A-H0-0000-0D0HC20E2
C2
440
489
XHP35A-H0-0000-0D0UC20E2
B4
410
456
XHP35A-H0-0000-0D0UB40E2
B2
380
423
XHP35A-H0-0000-0D0UB20E2
A4
355
395
XHP35A-H0-0000-0D0UA40E2
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 31).
•
Cree XLamp XHP35 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
*
Flux values @ 25 °C are calculated and are for reference only.
Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
12
XLamp ® XHP35 LED
Flux Characteristics, High Intensity ANSI Order Codes and Bins (TJ = 85 °C) - Continued
Nomimal
CCT
Minimum Luminous Flux
@ 350 mA
CRI
Chromaticity Regions
Min
Typ
0
68
70
5000 K
3A, 3B, 3C, 3D
80
90
0
70
4500 K
4A, 4B, 4C, 4D
80
90
68
Group
Flux (lm) Flux (lm)
@ 85 °C @ 25 °C*
Order Code
D4
550
612
XHP35A-H0-0000-0D00D40E3
D2
510
567
XHP35A-H0-0000-0D00D20E3
C4
475
528
XHP35A-H0-0000-0D00C40E3
D4
550
612
XHP35A-H0-0000-0D0BD40E3
D2
510
567
XHP35A-H0-0000-0D0BD20E3
C4
475
528
XHP35A-H0-0000-0D0BC40E3
D2
510
567
XHP35A-H0-0000-0D0HD20E3
C4
475
528
XHP35A-H0-0000-0D0HC40E3
C2
440
489
XHP35A-H0-0000-0D0HC20E3
C2
440
489
XHP35A-H0-0000-0D0UC20E3
B4
410
456
XHP35A-H0-0000-0D0UB40E3
B2
380
423
XHP35A-H0-0000-0D0UB20E3
A4
355
395
XHP35A-H0-0000-0D0UA40E3
D4
550
612
XHP35A-H0-0000-0D00D40E4
D2
510
567
XHP35A-H0-0000-0D00D20E4
C4
475
528
XHP35A-H0-0000-0D00C40E4
D4
550
612
XHP35A-H0-0000-0D0BD40E4
D2
510
567
XHP35A-H0-0000-0D0BD20E4
C4
475
528
XHP35A-H0-0000-0D0BC40E4
D2
510
567
XHP35A-H0-0000-0D0HD20E4
C4
475
528
XHP35A-H0-0000-0D0HC40E4
C2
440
489
XHP35A-H0-0000-0D0HC20E4
B4
410
456
XHP35A-H0-0000-0D0UB40E4
B2
380
423
XHP35A-H0-0000-0D0UB20E4
A4
355
395
XHP35A-H0-0000-0D0UA40E4
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 31).
•
Cree XLamp XHP35 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
*
Flux values @ 25 °C are calculated and are for reference only.
Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
13
XLamp ® XHP35 LED
Flux Characteristics, High Intensity ANSI Order Codes and Bins (TJ = 85 °C) - Continued
Nomimal
CCT
Chromaticity Regions
Min
0
4000 K
5A, 5B, 5C, 5D
70
80
90
70
3500 K
6A, 6B, 6C, 6D
80
90
70
3000 K
7A, 7B, 7C, 7D
80
90
80
2700 K
Minimum Luminous Flux
@ 350 mA
CRI
8A, 8B, 8C, 8D
90
Typ
68
Group
Flux (lm) Flux (lm)
@ 85 °C @ 25 °C*
Order Code
D4
550
612
XHP35A-H0-0000-0D00D40E5
D2
510
567
XHP35A-H0-0000-0D00D20E5
C4
475
528
XHP35A-H0-0000-0D00C40E5
C2
440
489
XHP35A-H0-0000-0D00C20E5
D4
550
612
XHP35A-H0-0000-0D0BD40E5
D2
510
567
XHP35A-H0-0000-0D0BD20E5
C4
475
528
XHP35A-H0-0000-0D0BC40E5
C2
440
489
XHP35A-H0-0000-0D0BC20E5
C4
475
528
XHP35A-H0-0000-0D0HC40E5
C2
440
489
XHP35A-H0-0000-0D0HC20E5
B4
410
456
XHP35A-H0-0000-0D0UB40E5
B2
380
423
XHP35A-H0-0000-0D0UB20E5
A4
355
395
XHP35A-H0-0000-0D0UA40E5
D2
510
567
XHP35A-H0-0000-0D0BD20E6
C4
475
528
XHP35A-H0-0000-0D0BC40E6
C2
440
489
XHP35A-H0-0000-0D0BC20E6
C4
475
528
XHP35A-H0-0000-0D0HC40E6
C2
440
489
XHP35A-H0-0000-0D0HC20E6
B4
410
456
XHP35A-H0-0000-0D0HB40E6
B2
380
423
XHP35A-H0-0000-0D0UB20E6
A4
355
395
XHP35A-H0-0000-0D0UA40E6
D2
510
567
XHP35A-H0-0000-0D0BD20E7
C4
475
528
XHP35A-H0-0000-0D0BC40E7
C2
440
489
XHP35A-H0-0000-0D0BC20E7
C2
420
489
XHP35A-H0-0000-0D0HC20E7
B4
410
456
XHP35A-H0-0000-0D0HB40E7
B2
380
423
XHP35A-H0-0000-0D0UB20E7
A4
355
395
XHP35A-H0-0000-0D0UA40E7
A2
330
367
XHP35A-H0-0000-0D0UA20E7
C2
420
489
XHP35A-H0-0000-0D0HC20E8
B4
410
456
XHP35A-H0-0000-0D0HB40E8
B2
380
423
XHP35A-H0-0000-0D0HB20E8
A4
355
395
XHP35A-H0-0000-0D0UA40E8
A2
330
367
XHP35A-H0-0000-0D0UA20E8
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 31).
•
Cree XLamp XHP35 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
*
Flux values @ 25 °C are calculated and are for reference only.
Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
14
XLamp ® XHP35 LED
Relative Spectral Power
Relative Spectral Power Distribution
Relative Radiant Power
100%
80%
60%
6000 K, 70 CRI
5000 K, 70 CRI
40%
3000 K, 80 CRI
20%
0%
380
430
480
530
580
630
680
730
780
Wavelength (nm)
Relative Flux Output vs. Junction Temperature
Relative Flux vs. Junction Temperature (IF = 350 mA)
120%
Relative Luminous Flux
100%
80%
60%
40%
20%
0%
25
50
75
100
125
150
Junction Temperature (ºC)
Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
15
XLamp ® XHP35 LED
Electrical Characteristics (Tj = 85°C)
Electrical Characteristics (TJ = 85 °C)
1050
Forward Current (mA)
875
700
525
350
175
10.5
11.0
11.5
12.0
12.5
Forward Voltage (V)
Relative Intensity vs. Current (Tj = 85°C)
Relative Flux vs. Current (TJ = 85 °C)
240%
Relative Luminous Flux
200%
160%
120%
80%
40%
0%
0
175
350
525
700
875
1050
Forward Current (mA)
Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
16
XLamp ® XHP35 LED
Relative Chromaticity
Current, WW
- High Density
Relative Chromaticity
vs. Vs.
Current
(Warm
White)
0.020
0.016
High Density
0.012
0.008
0.004
ΔCCx
0.000
ΔCCy
-0.004
-0.008
-0.012
-0.016
-0.020
0
175
350
525
700
875
1050
Current (mA)
Relative Chromaticity Vs. Current, WW - High Intensity
0.020
0.016
High Intensity
0.012
0.008
0.004
ΔCCx
0.000
ΔCCy
-0.004
-0.008
-0.012
-0.016
-0.020
0
175
350
525
700
875
1050
Current (mA)
Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
17
XLamp ® XHP35 LED
Relative Chromaticity
vs. Temperature
(Warm
White)
Relative Chromaticity
Vs. Temperature WW
- High Density
0.020
0.016
High Density
0.012
0.008
0.004
ΔCCx
0.000
ΔCCy
-0.004
-0.008
-0.012
-0.016
-0.020
25
50
75
100
125
150
Relative Chromaticity Vs. Temperature WW - High Intensity Tsp (°C)
0.020
0.016
High Intensity
0.012
0.008
0.004
ΔCCx
0.000
ΔCCy
-0.004
-0.008
-0.012
-0.016
-0.020
25
50
75
100
125
150
Tsp (°C)
Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
18
XLamp ® XHP35 LED
Typical Spatial Distribution
100%
Relative Luminous Intensity
80%
60%
High Density
40%
20%
0%
Typical
Spatial
Radiation
Pattern
-90
-70
-50
-30
-10
10
30
50
70
90
Angle (º)
100%
Relative Luminous Intensity
80%
60%
High Intensity
40%
20%
-90
-70
-50
-30
-10
0%
10
30
50
70
90
Angle (º)
Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
19
XLamp ® XHP35 LED
Thermal Design
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end
product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life
Thermal
and optical characteristics.
Design - High Intensity
1200
Maximum Current (mA)
1000
800
600
400
Rj-a = 2°C/W
Rj-a = 4°C/W
200
0
Rj-a = 6°C/W
Rj-a = 8°C/W
0
20
40
60
80
100
120
140
160
Ambient Temperature (ºC)
XHP35 High
Intensity
Performance Groups – Luminous Flux (TJ = 85 °C)
XLamp XHP35 LEDs are tested for luminous flux and placed into one of the following luminous-flux groups.
Group Code
Minimum Luminous Flux
Maximum Luminous Flux
A2
330
355
A4
355
380
B2
380
410
B4
410
440
C2
440
475
C4
475
510
D2
510
550
D4
550
590
E2
590
635
E4
635
680
F2
680
730
Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
20
XLamp ® XHP35 LED
Performance Groups – Chromaticity
XLamp XHP35 LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates.
EasyWhite Color Temperatures – 3-Step Ellipse
Center Point
Major Axis
Minor Axis
x
y
a
b
Rotation Angle
(°)
3500 K
0.4073
0.3917
0.00927
0.00414
54.0
30G
3000 K
0.4338
0.4030
0.00834
0.00408
53.2
27G
2700 K
0.4577
0.4099
0.00834
0.00420
48.5
Rotation Angle
(°)
Bin Code
CCT
35G
EasyWhite Color Temperatures – 5-Step Ellipse
Bin Code
Center Point
CCT
x
Major Axis
Minor Axis
y
a
b
57E
5700 K
0.3287
0.3417
0.01230
0.00600
72.0
50E
5000 K
0.3447
0.3553
0.01400
0.00520
65.0
45E
4500 K
0.3611
0.3658
0.01420
0.00550
61.5
40E
4000 K
0.3818
0.3797
0.01565
0.00670
53.7
35E
3500 K
0.4073
0.3917
0.01545
0.00690
54.0
30E
3000 K
0.4338
0.4030
0.01390
0.00680
53.2
27E
2700 K
0.4577
0.4099
0.01350
0.00700
48.5
ANSI White Bins
CCT
Bin Code
0A0
0B0
7000 K
0C0
0D0
ANSI White Bins
x
y
0.2950
0.2970
0.2920
0.3060
0.2984
0.3133
0.3009
0.3042
0.2920
0.3060
0.2895
0.3135
0.2962
0.3220
0.2984
0.3133
0.2984
0.3133
0.2962
0.3220
0.3028
0.3304
CCT
Bin Code
0R0
0S0
7000 K
0T0
x
y
0.2980
0.2880
0.2950
0.2970
0.3009
0.3042
0.3037
0.2937
0.2895
0.3135
0.2870
0.3210
0.2937
0.3312
0.2962
0.3220
0.2962
0.3220
0.2937
0.3312
0.3005
0.3415
0.3048
0.3207
0.3028
0.3304
0.2984
0.3133
0.3037
0.2937
0.3048
0.3207
0.3009
0.3042
0.3068
0.3113
0.3068
0.3113
0.3009
0.3042
0.3093
0.2993
0U0
Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
21
XLamp ® XHP35 LED
Performance Groups – Chromaticity (Continued)
ANSI White Bins
CCT
Bin Code
1A0
1B0
6500 K
1C0
1D0
ANSI White Bins
x
y
0.3048
0.3207
0.3130
0.3290
0.3144
0.3186
0.3068
0.3113
0.3028
0.3304
0.3115
0.3391
0.3130
0.3290
0.3048
0.3207
0.3115
0.3391
0.3205
0.3481
0.3213
0.3373
CCT
1R0
1S0
6500 K
1T0
Bin Code
2A0
2B0
5700 K
2C0
2D0
x
y
0.3068
0.3113
0.3144
0.3186
0.3161
0.3059
0.3093
0.2993
0.3005
0.3415
0.3099
0.3509
0.3115
0.3391
0.3028
0.3304
0.3099
0.3509
0.3196
0.3602
0.3205
0.3481
0.3130
0.3290
0.3115
0.3391
0.3130
0.3290
0.3144
0.3186
0.3213
0.3373
0.3221
0.3261
0.3221
0.3261
0.3231
0.3120
0.3144
0.3186
0.3161
0.3059
1U0
ANSI White Bins
CCT
Bin Code
ANSI White Bins
x
y
0.3215
0.3290
0.3290
0.3300
CCT
Bin Code
x
y
0.3350
0.3222
0.3243
0.3417
0.3290
0.3300
0.3290
0.3180
2R0
0.3222
0.3243
0.3231
0.3120
0.3207
0.3462
0.3196
0.3602
0.3290
0.3538
0.3290
0.3690
0.3290
0.3417
0.3290
0.3538
0.3215
0.3350
0.3290
0.3538
0.3376
0.3616
0.3371
0.3490
0.3290
2S0
0.3207
0.3462
0.3290
0.3690
0.3381
0.3762
0.3376
0.3616
0.3417
0.3290
0.3538
0.3290
0.3417
0.3290
0.3300
0.3371
0.3490
0.3366
0.3369
0.3366
0.3369
0.3361
0.3245
0.3290
0.3300
0.3290
0.3180
5700 K
2T0
2U0
Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
22
XLamp ® XHP35 LED
Performance Groups – Chromaticity (Continued)
ANSI White Bins
CCT
Bin Code
3A0
3B0
5000 K
3C0
3D0
ANSI White Bins
x
y
0.3371
0.3490
CCT
0.3451
0.3554
0.3440
0.3427
0.3366
0.3369
0.3515
0.3487
0.3376
0.3616
0.3548
0.3736
0.3463
0.3687
0.3641
0.3804
0.3451
0.3554
0.3530
0.3597
0.3371
0.3490
0.3533
0.3620
0.3463
0.3687
0.3641
0.3804
0.3551
0.3760
0.3736
0.3874
0.3533
0.3620
0.3702
0.3722
4A0
4B0
4500 K
4C0
Bin Code
5A0
5B0
4000 K
5C0
5D0
x
y
0.3530
0.3597
0.3615
0.3659
0.3512
0.3465
0.3451
0.3554
0.3615
0.3659
0.3451
0.3554
0.3615
0.3659
0.3533
0.3620
0.3702
0.3722
0.3515
0.3487
0.3670
0.3578
0.3440
0.3427
0.3590
0.3521
4D0
ANSI White Bins
CCT
Bin Code
ANSI White Bins
x
y
0.3670
0.3702
0.3825
0.3798
CCT
Bin Code
x
y
0.3578
0.3889
0.3690
0.3722
0.3941
0.3848
0.4080
0.3916
6A0
0.3783
.3646
0.4017
0.3751
0.3702
0.3722
0.3941
0.3848
0.3736
0.3874
0.3996
0.4015
0.3869
0.3958
.04146
0.4089
0.3825
0.3798
.04080
0.3916
0.3825
0.3798
0.4080
0.3916
0.3869
0.3958
0.4146
0.4089
.04006
0.4044
0.4299
0.4165
0.3950
0.3875
0.4221
0.3984
0.3783
0.3646
0.4017
0.3751
0.3825
0.3798
0.4080
0.3916
0.3950
0.3875
0.4221
0.3984
0.3898
0.3716
0.4147
0.3814
6B0
3500 K
6C0
6D0
Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
23
XLamp ® XHP35 LED
Performance Groups – Chromaticity (Continued)
ANSI White Bins
CCT
Bin Code
7A0
7B0
3000 K
7C0
7D0
ANSI White Bins
x
y
0.4147
0.3814
CCT
Bin Code
0.4221
0.3984
0.4342
0.4028
0.4259
0.3853
0.4483
0.3919
0.4221
0.3984
0.4465
.04071
0.4299
0.4165
0.4562
0.4260
0.4430
0.4212
0.4687
0.4289
0.4342
.04028
.04582
0.4099
0.4342
0.4028
0.4582
0.4099
0.4430
0.4212
0.4687
0.4289
0.4562
0.4260
0.4813
0.4319
8A0
8B0
2700 K
8C0
x
y
0.4373
0.3893
0.4465
0.4071
0.4582
0.4099
0.4465
0.4071
0.4700
0.4126
0.4259
0.3853
0.4483
0.3919
0.4342
0.4028
0.4582
0.4099
0.4465
0.4071
0.4700
0.4126
0.4373
0.3893
0.4593
0.3944
8D0
Cree’s EasyWhite® Chromaticity Regions Plotted on the 1931 CIE Curve
ANSI Cool White
0.40
5000 K
0.39
5700 K
0.38
0.37
6500 K
2T
0.36
2S
CCy
0.35
2C
1T
8000 K
2B
1S
0.34
0T
0.33
0S
0.32
0B
0.31
1D
2U
ANSI
C78.377A
2R
1A
1U
0D
0A
0.30
2A
1B
0C
2D
1C
1R
0U
0R
0.29
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.29
0.28
0.28
CCx
Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
24
XLamp ® XHP35 LED
Cree’s EasyWhite® Chromaticity Regions Plotted on the 1931 CIE Curve - Continued
ANSI Neutral White and ANSI Warm White
0.45
0.44
2700 K
3000 K
0.43
0.42
3500 K
4000 K
CCy
0.40
6C
4500 K
6B
5C
0.39
0.37
5700 K
0.36
3C
3B
3D
0.35
4C
4B
7D
7A
8A
8C
8D
6D
5B
5000 K
0.38
7C
7B
0.41
8B
5D
6A
5A
4D
4A
3A
0.34
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.32
0.33
CCx
Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
25
XLamp ® XHP35 LED
Cree’s EasyWhite® Chromaticity Regions Plotted on the 1931 CIE Curve - Continued
0.44
ANSI C78.377 Quadrangle
0.43
2700 K
3000 K
EasyWhite 5-Step
0.42
3500 K
EasyWhite 3-Step
0.41
4000 K
0.40
4500 K
0.39
5000 K
0.38
CCy
0.37
5700 K
0.36
6500 K
0.35
0.34
8000 K
0.33
0.32
0.31
0.30
0.29
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.29
0.28
0.27
0.28
CCx
Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
26
XLamp ® XHP35 LED
Cree’s Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions
0.40
0.40
5000 K
0.39
0.38
0.38
5700 K
5700 K
DV
0.37
0.37
6500 K
6500 K
2T
0.36
0.36
2S
DT
0.34
1D
ANSI
C78.377A
1U
0D
0A
0.31
1R
0C
0B
1D
0A
ANSI
C78.377A
1R
0U
0.36
0.35
0.30
0.29
0.28
0.36
0.35
0.34
0.33
0.32
0.31
0.28
0.30
0.28
0.34
0R
0.29
CCx
CCx
0.40
0.40
5000 K
0.39
0.38
0.38
3S
6500 K
0.35
1T
0T
0.33
0S
0.32
0C
0.31
3R
2A
1D
0T
0S
1R
0C
0A
3R
2A
2U
1D
ANSI
C78.377A
2R
1A
0D
2D
1C
1B
0B
3A
2B
1S
0.31
1U
1R
0U
0.30
0U
0.30
8000 K
0.34
0.32
ANSI
C78.377A
2R
1U
2C
1T
0.33
2U
1A
0D
0A
2D
1C
1B
0B
3A
2B
1S
3B
2S
0.35
2C
3S
2T
0.36
3B
2S
8000 K
0.34
6500 K
2T
E1
5700 K
E2
0.37
CCy
0.36
5000 K
0.39
5700 K
0.37
0R
0R
0.29
0.29
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.29
0.28
CCx
0.29
0.28
0.28
0.28
CCy
2U
2R
1U
0D
0R
0.29
2A
1A
0.30
0.29
0.28
2D
1C
1B
0S
0.32
0U
0.30
1S
0T
0.33
2U
2R
1A
0.34
2B
0.33
0.31
2A
1B
0C
0B
2D
1C
2C
1T
8000 K
0.32
0S
0.32
0.35
2B
1S
0T
0.33
2C
1T
2T
2S
0.31
8000 K
CCy
0.35
CCy
5000 K
0.39
CCx
Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
27
XLamp ® XHP35 LED
Cree’s Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions
0.45
0.44
E7
0.42
3500 K
4000 K
0.40
0.39
5000 K
0.38
4500 K
E4
4B
3C
0.36
3B
3D
0.35
2700 K
8C
7B
6C
6B
8A
7D
7A
5C
8D
6D
5B
4C
E3
0.37
E5
8B
7C
E6
0.41
CCy
E8
3000 K
0.43
6A
ANSI
C78.377A
5D
5A
4D
4A
3A
0.34
0.50
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.32
0.33
CCx
Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
28
XLamp ® XHP35 LED
Bin and Order Code Formats
Bin codes and order codes for XHP35 LEDs are configured in the following manner:
Order Code
SSSSSS-BD-GGGG-HJKLMMNNN
Bin Code
Series
XHP35A = XHP35
Series
XHP35A = XHP35
Internal code
Chromaticity group
Minimum luminous flux group
Luminous flux group
Voltage performance group
Chromaticity group
CRI specification
0 = No minimum CRI
B = 70 CRI minimum
H = 80 CRI minimum
P = 85 CRI minimum
U = 90 CRI minimum
Configuration
B: Version
0 = High density
H = High intensity
D: Reel size
CRI specification
0 = No minimum CRI
B = 70 CRI minimum
H = 80 CRI minimum
P = 85 CRI minimum
U = 90 CRI minimum
SSSSSS-B-NNN-MMM-JK-L-PP
Internal code
Version
0 = High density
H = High intensity
Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
29
XLamp ® XHP35 LED
Reflow Soldering Characteristics
In testing, Cree has found XLamp XHP35 LEDs to be compatible with JEDEC J‑STD‑020C, using the parameters listed below. As a general
guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used.
Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
tP
TP
Critical Zone
TL to TP
Temperature
Ramp-up
TL
tS
Tsmax
Tsmin
Ramp-down
ts
Preheat
25
t 25˚C to Peak
Profile Feature
Average Ramp-Up Rate (Tsmax to Tp)
IPC/JEDEC J-STD-020C
Time
Lead-Free Solder
1.2 °C/second
Preheat: Temperature Min (Tsmin)
120 °C
Preheat: Temperature Max (Tsmax)
170 °C
Preheat: Time (tsmin to tsmax)
65-150 seconds
Time Maintained Above: Temperature (TL)
Time Maintained Above: Time (tL)
217 °C
45-90 seconds
Peak/Classification Temperature (Tp)
235 - 245 °C
Time Within 5 °C of Actual Peak Temperature (tp)
20-40 seconds
Ramp-Down Rate
1 - 6 °C/second
Time 25 °C to Peak Temperature
4 minutes max.
Note: All temperatures refer to the topside of the package, measured on the package body surface.
Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
30
XLamp ® XHP35 LED
Notes
Measurements
The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely
represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors
that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated values are
provided for informational purposes only and are not intended as specifications.
Pre‑Release Qualification Testing
Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp
LEDs and details of Cree’s pre-release qualification testing for XLamp LEDs.
Lumen Maintenance
Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance.
For information on the specific LM‑80 data sets available for this LED, refer to the public LM-80 results document.
Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting.
Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect
the LED junction temperature.
Moisture Sensitivity
Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering.
Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp XHP35 LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in
conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered LEDs
in the original MBP.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product
Documentation sections of www.cree.com.
REACh Compliance
REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA)
has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to
insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available
upon request.
Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
31
XLamp ® XHP35 LED
Notes - Continued
UL® Recognized Component
Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/
UL 8750.
Vision Advisory
WARNING: Do not look at exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer
to the LED Eye Safety application note.
Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
32
XLamp ® XHP35 LED
Mechanical Dimensions
Thermal
vias, if present, are not
shown5on these drawings.
6
5
6
5
4
4
4
3
3
3
2
2
2
REVISONS
All dimensions are ±.13 mm unless otherwise indicated.
NOTICE
NOTICE
E.ND
CONFIDENTIAL.
THISINFORMATION
PLOT AND THE INFORMATION
THIS
PLOT
AND THE
THE
INFORMATION
TAINED
PROPRIETARY AND
ARE
THEWITHIN
PROPRIETARY
AND
PRIETARY
AND ARE THE
FIDENTIAL
INFORMATION
OFPLOT
CREE, INC. THIS PLOT
RMATION
CREE,
INC. THIS
CREE, INC.OF
THIS
PLOT
COPIED,
REPRODUCED
ORANY
DISCLOSED TO ANY
, NOT
REPRODUCED
OR
DISCLOSED
TO
ED
OR BE
DISCLOSED
TO
ANY
UTHORIZED
WITHOUT
THE WRITTEN CONSENT
SON
WITHOUT
WRITTEN CONSENT
UT
THE PERSON
WRITTENTHE
CONSENT
REE INC.
REV
DESCRIPTION
REV
REV
REVISON
DESCRIPTION
DES
3.30
3.3
XHP35 High Density
XHP35A-0x-xxxx-xxxxxxxxx
XHP35 High Density
.65
.50
.65
2.30
2.30
2.30
.65
.50
.50
.50
2.80
2.80
2.80
3.45
3.45
3.45
3.30
3.30
3.30
.50
.50
Anode
3.45
3.45
6
3.30
5
5
6
NOTICE
NOTICE
NTIAL.
THIS
PLOT THIS
ANDPLOT
THE INFORMATION
AND
CONFIDENTIAL.
THE
INFORMATION
AND THE INFORMATION
THIN ARE
THE
AND
OPRIETARY
TAINED
WITHIN
ANDPROPRIETARY
ARE THE PROPRIETARY
AND
INFORMATION
CREE, INC.
THIS PLOT
FIDENTIAL
CREE, INC.INFORMATION
THISOF
PLOT
OF CREE,
INC. THIS PLOT
OPIED,
REPRODUCED
DISCLOSED
TO ANY TO ANY
ED
NOT
ORBE
DISCLOSED
COPIED, REPRODUCED
TOOR
ANY
OR DISCLOSED
D
WITHOUT
THE WRITTEN
UTHORIZED
UTPERSON
THE
PERSON
WRITTENWITHOUT
CONSENT
THECONSENT
WRITTEN CONSENT
REE INC.
.50
5
R1.85
R1.85
4
4
R1.85
Top View
3
3
4
Side View
3
2
1.30
1.30
BottomREVView
2
1.30
REV
2
RE
REVISONS
REV
DESCRIPTION
DESCRIPTION DES
XHP35 High Intensity
.50
.50
XHP35A-Hx-xxxx-xxxxxxxxx
.50
.50
XHP35 High Intensity
.64
.64
.64
.50
.50
.50
3.30
.50
2.30
3.45
3.45
3.30
3.30
3.45
1.30
3.30
3.30
3.30
1.01
1.01
1.01
2.30
2.30
2.30
3.30
3.30
3.30
.75
.25
.50
.25
.50
.25
3.30
.75
3.45
1.30
3.30
2.30
.50
.50
2.30
3.45
3.30
1.30
3.30
Anode
.50
.75
DRAWN
BY
DATE
DRAWN BY
Side View
Top View
Bottom View
1.6 FINISH:
SURFACE FINISH: SURFACE
6
6
5
5
5
4
4
4
3.3
AREOTHERWISE
± .13mm
UNLESSNOTE
OTHE
ALL DIMENSIONS
ARE
.13mm
UNLESS
OTHERWISE
ALL DIMENSIONS
ARE ALL±DIMENSIONS
.13mm ±
UNLESS
NOTED
UNLESS OTHERWISE SPECIFIED
UNLESS
OTHERWISE SPECIFIED
UNLESS OTHERWISE
SPECIFIED
CRONIN ARED.INCRONIN
5/11/15
DIMENSIONS
ARE IN D.
DIMENSIONS AREDIMENSIONS
IN
CHECK
CHECK
DATE
MILLIMETERS
AND AFTER
FINISH.
AND AFTER
FINISH.
MILLIMETERS ANDMILLIMETERS
AFTER FINISH.
RECOMMENDED
STENCIL PATTERN
RECOMMENDED
STENCIL PATTERN
RECOMMENDED
STENCIL
PATTERN
TOLERANCE UNLESS SPECIFIED:
TOLERANCE
UNLESS SPECIFIED:
TOLERANCE UNLESS
SPECIFIED:
.XX
±APPROVED
.25
± APPROVED
.25
.XX
±
.25 .XX
(HATCHED
AREA IS OPEN)
AREA
IS OPEN)
(HATCHED(HATCHED
AREA IS OPEN)
DATE
.XXX ± 1.30
.125
.1251.30
.XXX ± 1.30
.125.XXX ±
X°
±
.5 °
X°
±
.5 °
X°
±
.5
°
1.0
1.0
1.0
THIRD ANGLE PROJECTION
THIRD ANGLE PROJECTION
THIRD ANGLE PROJECTION
MATERIAL
MATERIAL
FOR
SHEET METAL PARTS
ONLY
SHEET
METAL PARTS
ONLY
FOR SHEET METALFOR
PARTS
ONLY
.X
±
1.5
±
1.5
.X
±
1.5 .X
.XX
±
.75
±
.75
.XX
±
.75 .XX
.XXX
± PROTECTIVE
.25 FINISH
.25PROTECTIVE
.XXX ±
.25 .XXX ± FINAL
FINISH FINAL
X°
±
.5 °
±
.5 °
X°
±
.5 °X°
RECOMMENDED
RECOMMENDED
PCB
SOLDER PCB
PAD SOLDER PAD
COMMENDED
PCB SOLDER
PAD
3.30
3.30
3
3
3
1.6
SURFACE
FINISH:
2
1.6
DATE
DRAWN BY
DATE
D. CRONIN
5/11/15
5/11/15
CHECK
DATE
DATE
APPROVED
DATE
DATE
TITLE
TITLE
OUTLINE OUTL
DRAW
MATERIAL
SIZE
C
SIZE
DRAWING NO.
FINAL PROTECTIVE FINISH
SCALE
22.000
2
Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
33
SCALE
2
C 26
22.000
3.45
C
3.45
XLamp ® XHP35 LED
C
Mechanical Dimensions - Continued
R1.85 R1.85
1.30
1
XHP35 High Density and XHP35 High Intensity
.50
.50
.50
.50
.50
B
.64
.50
B
3.30
3.30
3.30
.25
3.30
.75
1.30
1.30
3.30
A
.64
A
3.30
Recommended PCB Solder Pad
6
1.01
2.30
2.30
3.30
3.30
.75
ALL DIMENSIONS
ARE ARE
±
ALL DIMENSIONS
Recommended Stencil Pattern
(Hatched
Area
Is Open)
RECOMMENDED
STENCIL
PATTERN
UNLESS OTHERWISE SPECIFIED
UNLESS OTHERWISE SPE
DIMENSIONS ARE IN
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
MILLIMETERS AND AFTER
TOLERANCE UNLESS SPECIFIED:
RECOMMENDED STENCIL PATTERN
TOLERANCE UNLESS SPE
.XX
±
.25
(HATCHED
AREA ISAREA
OPEN)
.XX
±
(HATCHED
IS OPEN)
.XXX ±
.125
.XXX ±
X°
±
.5 °
X°
±
THIRD ANGLE PROJECTION
THIRD ANGLE PROJECTION FOR SHEET METAL PARTS ONLY
FOR SHEET METAL PART
.X
±
1.5
.X
±
.XX
±
.75
.XX
±
.XXX ±
.25
.XXX ±
X°
±
.5 °
X°
±
1.6
SURFACE FINISH:
SURFACE FINISH:
RECOMMENDED
PCB SOLDER
PAD PAD
RECOMMENDED
PCB SOLDER
6
1.01
.25
5
5
4
4
3
3
Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
34
A
XLamp ® XHP35 LED
B
Tape and Reel
A
All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard.
6
NOTICE
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
CONTAINED WITHIN ARE THE PROPRIETARY AND
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
OF CREE INC.
66
XHP35 High Density
5
4
55
44
NOTICE
NOTICE
CREE
CONFIDENTIAL.
THIS
PLOT
AND
THE
INFORMATION
CREE
CONFIDENTIAL.
THIS
PLOT
AND
THE
INFORMATION
CONTAINED
WITHIN
ARE
THE
PROPRIETARY
AND
6
CONTAINED
WITHIN
ARE
THE
PROPRIETARY
AND
CONFIDENTIAL
INFORMATION
OF
CREE,
INC.
THIS
PLOT
CONFIDENTIAL
INFORMATION
OF
CREE,
INC.
THIS
PLOT
NOTICE
MAY
NOT
BE
COPIED,
REPRODUCED
OR
DISCLOSED
TO
ANY
MAY
NOT
BE
COPIED,
REPRODUCED
OR
DISCLOSED
TO
ANY
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
D UNAUTHORIZED
UNAUTHORIZED
PERSONWITHOUT
WITHOUT THE
THE
WRITTEN
CONSENT
PERSON
WRITTEN
CONSENT
CONTAINED WITHIN ARE THE PROPRIETARY AND
OF
CREE
INC.
OF
CREE
INC.
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
XHP35A-0x-xxxx-xxxxxxxxx
2.00 [.079]
P2
DD
4.00 [.157]
2.00 [.079]
[.079]
2.00
Po
P2
P2
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
OF CREE INC.
4
1.75 [.069]
[.069]
1.75
E1
E1
CATHODESIDE
SIDE
CATHODE
1.75 [.069]
E1
CATHODE SIDE
C
Ø1.50
5.50
[.217]F
5.50
[.217]F
[.059]
D1
MIN
Ø1.50
Ø1.50
[.059]
[.059]
D1
D1
MIN
MIN
C
CC
ANODE SIDE
8.00 [.315]
P
ANODESIDE
SIDE
ANODE
B
8.00 [.315]
P
8.00 [.315]
[.315]
8.00
4.0±.1
PP
1.75±.10
3.0 °
+.3
12.0
.0
3.60 [.142]
Ao
END
10.25
[.404]
E2
12.30 [.484]
12.00
[.472]
12.00
[.472]
MAX
5.50
[.217]F
NOMINAL
NOMINAL
W
10.25
10.25
[.404]
[.404]
E2
E2
12.30[.484]
[.484]
12.30
Ø1.50
MAX
MAX
[.059]
W
W
D1
Bo -
Bo
C
3.60 [.142]
[.142]
3.60
3.0 °
Bo
Bo
3.0 °°
3.0
12.00 [.472]
NOMINAL
10.25
[.404]
E2
3.60 mm [.142"]
3.60 [.142]
Bo
C
CC
12.30 [.484]
MAX
W
3.00 [.118]
Ko
1.5±.1
8.0±.1
.30 [.012]
T
Anode Side
.30 [.012]
[.012]
.30
TT
2.5±.1
3.00 [.118]
Ko
B
B
Cathode Side
BB
3.0 °°
3.0
3.60 [.142]
Ao
Anode Side
(denoted by + UNLESS
andOTHERWISE
circle)
SPECIFIED
DRAWN BY
DATE
UNLESS OTHERWISE SPECIFIED
D. CRONIN
5/16/14 ARE IN
DIMENSIONS
DIMENSIONS ARE IN
MILLIMETERS
CHECK
DATE AND AFTER FINISH.
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
TOLERANCE UNLESS SPECIFIED:
.XX ±
.25
.XX ±
.25
DATE
APPROVED
.XXX ±
.125
TITLE
.XXX ±
.125
X°
±
.5 °
ANGLE
X° THIRD
±
.5 ° PROJECTION
User Feed Direction
User Feed Direction
END
THIRD ANGLE PROJECTION
6
5
5
4
Trailer
160mm (min) of
160 mm (min.)
55
emptyof
pockets
empty pockets
sealed with tape
sealed with
tape
(20 pockets min.)
(20 pockets min.)
4
3
THIRD
ANGLE
PROJECTION
THIRD
ANGLE
PROJECTION
Loaded Pockets
Trailer
66
[.142]
3.00
mm
[.118"]
3.00
mm
Ko3.60
-[.118"]
3.00 mm [.118"]
3.0
°
.30 [.012]
T
AA
6
Ko-Ko
MIN
3.00 [.118]
[.118]
3.00
3.0 °
Ko
Ko
A
3.60 [.142]
[.142]
3.60
Ao
Ao
3.60mm
mm[.142"]
[.142"]
3.60
3.00 mm
Ao -[.118"]
3.60 mm [.142"]
3.60mm
mm[.142"]
[.142"]
3.60
ANODE SIDE
BB
A
Ao-Ao
Ko Bo-Bo
12.00 [.472]
NOMINAL
5.50 [.217]F
B
Ao 3.60
SECTION
A-A mm [.142"]
SCALE POCKET
2POCKET
:1
SIZE
Bo 3.60 mmSIZE
[.142"]
POCKET SIZE
Ø1.50
+.10
-.00
SCALE 2 : 1
4.00 [.157]
Po
POCKET SIZE
3
Ø1.50
+.10
-.00
1.75 [.069]
Ø1.50
Ø1.50
E1
+.10
+.10
DETAIL
B
-.00
-.00
2.00 [.079]
CATHODE
P2 SIDE
4.00 [.157]
[.157]
4.00
Po
Po
Except as noted, all dimensions in mm [inches]
33
5
XHP35 High Density
D
3
Loaded Pockets
(1,000 Lamps)
(500 Lamps)
44
33
FOR
SHEET
METAL
PARTS
ONLY
FOR
SHEET
METAL
PARTS
ONLY
.X.X ± ±
1.51.5
.XX ± ± .75.75
.XX
.XXX ± ± .25.25
.XXX
X°X° ± ± .5 .5° °
SURFACE
FINISH: 1.61.6
SURFACE
FINISH:
D. CRONIN
DATE
START
FINAL PROTECTIVE FINISH
SURFACE FINISH:
DATE
DATE
APPROVED
APPROVED
3
MATERIAL
MATERIAL
5/16/14
DATE
APPROVED
START
FOR SHEET METAL PARTS ONLY
MATERIAL
DATE
DRAWN
DATE
DRAWN
BYBY
.X
±
1.5
.XX ±
.75
CRONIN
5/16/14
D.D.
CRONIN
5/16/14
.XXX ± SIZE
.25
CHECK
DATE
CHECK
DATE
X°
±
.5 °
FOR SHEET METAL PARTS ONLY
UNLESS
OTHERWISE
SPECIFIED
UNLESS
OTHERWISE
SPECIFIED
.X
± ARE IN
1.5
DIMENSIONS
DIMENSIONS
ARE
IN
.XX ±
.75
MILLIMETERS
AND AFTER
FINISH.
MILLIMETERS
AND
.XXX AFTER
± FINISH.
.25
TOLERANCE
SPECIFIED:
TOLERANCE
UNLESS
X°UNLESS
± SPECIFIED:
.5 °
.XX
±
.25
.XX ±
.25
1.6
SURFACE
FINISH:
.XXX
.125
.XXX
± ± .125
X°X° ± ± .5 .5° °
DATE
DRAWN BY
CHECK
1.6
SCALE
TITLE
TITLE
C
4600 Silicon Drive
Durham, N.C 27703
4600 Silicon Drive
Durham, N.C 27703
Phone (919) 313-5300
Phone (919) 313-5300
Fax (919) 313-5558
Fax (919) 313-5558
Carrier Tape, XPL
MATERIAL
SIZE
DRAWING
NO.
FINAL PROTECTIVE
FINISH
Carrier Tape, XPL
2402-00040
SCALE
Fax (919) 313-5558
2
SHEET
REV.
DRAWING NO.
C
4600
Silicon
Drive
4600
Silicon
Drive
Durham,
N.C
27703 REV.
Durham,
N.C
27703
Phone
(919)
313-5300
Phone
(919)
313-5300
2402-00040
Fax 1.000
(919) 313-5558 A
1.000
A
A
TITLE
OF
SHEET
A
1 /1 A
A
OF
1 /1
1
1
CarrierTape,
Tape,XPL
XPL
Carrier
2
SIZE
SIZE
Leader
CC
Leader
400mm (min) of1.000
1.000
400empty
mm22(min.)
of with
pockets
emptyatpockets
with
least 100mm
at least
100 mm
sealed
by tape
sealed
by tape
(50 empty
pockets min.)
FINAL
PROTECTIVE
FINISH
FINAL
PROTECTIVE
FINISH
SCALE
SCALE
REV.
REV.
DRAWING
NO.
DRAWING
NO.
2402-00040
2402-00040
SHEET
SHEET
AA
OFOF
1 1/1/1
11
(50 empty pockets min.)
User Feed Direction
Cover Tape
Pocket Tape
13mm
7"
Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
35
B
XLamp ® XHP35 LED
A
Tape and Reel - Continued
POCKET SIZE
XHP35 High Intensity
SECTION
A-AmmSIZE
POCKET
SIZE
Ao - POCKET
3.70
[.146"]
SCALE 2 : 1
XHP35A-Hx-xxxx-xxxxxxxxx
XHP35 High Intensity
4.00 [.157]
Po
4.00 [.157]
[.157]
4.00
Po
Po
2.00 [.079]
P2
2.00 [.079]
[.079]
2.00
P2
P2
Ø 1.50
+.10 +.0039
-.00[.0591-.0000]Do
DETAIL B
+.10 +.0039
: 1 -.00[.0591-.0000]Do
1.50+.102+.0039
-.00[.0591-.0000]Do
ØØSCALE
1.50
Ao
Bo -Ao
3.70 mm
mm [.146"]
[.146"]
3.70
Bo
Ko-Bo
3.70
mm [.146"]
[.146"]
1.20mm
[.047"] POCKET SIZE
3.70
Ko -Ko
1.20 mm
mm [.047"]
[.047"]
1.20
Ao - 3.70 mm [.146"]
1.75 [.069]
E1
1.75
[.069]
1.75 [.069]
2.00 [.079] E1
E1
+.10 +.0039
Ø 1.50
-.00[.0591-.0000]Do
P2
CATHODE SIDE
CATHODESIDE
SIDE
CATHODE
4.00 [.157]
Po
5.50 [.217]F
CATHODE SIDE
5.50 [.217]F
[.217]F
5.50
Ø 1.50
[.059]
1.50
ØØD1
1.50
MIN
[.059]
[.059]
D1
D1
MIN
MIN
ANODE SIDE
ANODE
SIDE
ANODE
SIDE
8.00 [.315]
P
8.00 [.315]
[.315] 4.0±.1
8.00
PP
1.75±.10
ANODE SIDE
8.00 [.315]
P
3.0°
+.3
12.0
.0
10.25
[.404]
E2
10.25
10.25
[.404]
[.404]
E2
E2
1.75 [.069]
12.00 [.472]
E1
NOMINAL
12.00 [.472]
[.472]
12.00
12.30
[.484]
NOMINAL
NOMINAL
MAX
12.30W
[.484]
12.30
[.484]
MAX
MAX
5.50 [.217]F
W
W
Ø 1.50
[.059]
D1
MIN
8.0±.1
1.20 [.047]
Ko
1.20 [.047]
[.047]
1.20
Ko
Ko
3.0°
3.0°
3.70 [.146]
Ao
3.70 [.146]
[.146]
3.70
Ao
Ao
10.25
[.404]
E2
Bo -
3.70 mm [.146"]
Ko -
1.20 mm [.047"]
3.0°
3.0°
3.0°
12.00 [.472]
NOMINAL
3.70 [.146]
Bo
3.70 [.146]
[.146]
3.0°
3.70
Bo
Bo
3.70 [.146]
Bo
12.30 [.484]
MAX
W
1.5±.1
.30 [.012]
T
.30 [.012]
[.012]
.30
TT
2.5±.1
Cathode Side
Anode Side
.30 [.012]
T
1.20 [.047]
Ko
Anode Side
3.0°
(denoted by + and circle)
User Feed Direction
END
START
3.70 [.146]
Ao
Trailer
160mm (min) of
empty pockets
sealed with tape
(20 pockets min.)
Loaded Pockets
(1,000 Lamps)
Leader
400mm (min) of
empty pockets with
at least 100mm
sealed by tape
(50 empty pockets min.)
User Feed Direction
Cover Tape
Pocket Tape
13mm
7"
Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
36
XLamp ® XHP35 LED
Packaging
Unpackaged Reel
Vacuum-Sealed
Vacuum-Sealed
Moisture
Barrier Bag
Moisture Barrier Bag
Label
CREE
Binwith
Code Cree Bin
&
Barcode
LabelLot #
Code,
Qty,
Label with Cree Bin Code,
Quantity, Reel ID
Label
with
Cree Bin
Label with
Customer
P/N, Qty,Qty,
Lot #, Lot
PO # #
Code,
Packaged Reel
Patent Label
Label with Customer Order
Label
with Cree Order Code,
Code, Qty, Reel ID, PO #
Quantity, Reel ID, PO #
Label with Cree Bin Code,
Quantity, Reel ID
Boxed Reel
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Bin Code,
Quantity, Reel ID
Patent Label
(on bottom of box)
Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
37