IES LM-80 Testing Results

Cree® LED Components
IES LM-80-2008 Testing Results
Revision: 22 (June 16, 2016)
CLD-AP57 Rev 22
Application Note
NVLAP Lab Code 500041-0
www.cree.com/Xlamp
www.cree.com/modules
Table of Contents
Introduction....................................................................................2
NVLAP Accreditation for LM-80-2008 Testing.............................2
LED Modules (Rev 3).....................................................................3
XLamp® CXA1304 White LEDs (Rev 4).........................................5
XLamp® CXA1310 White LEDs (Rev 1A).......................................6
XLamp® CXA1507 White LEDs (Rev 2).........................................7
XLamp® CXA1510 White LEDs (Rev 4).........................................9
XLamp® CXA1512 White LEDs (Rev 4).......................................10
XLamp® CXA1520 White LEDs (Rev 1A).....................................11
XLamp® CXA1816 White LEDs (Rev 4).......................................12
XLamp® CXA1820 White LEDs (Rev 4).......................................13
XLamp® CXA1830 White LEDs (Rev 4).......................................14
XLamp® CXA1850 White LEDs (Rev 1A).....................................15
XLamp® CXA2011 White LEDs (Rev 0).......................................16
XLamp® CXA2520 White LEDs (Rev 4).......................................17
XLamp® CXA2530 White LEDs (Rev 4).......................................18
XLamp® CXA2540 White LEDs (Rev 4).......................................19
XLamp® CXA2590 White LEDs (Rev 1A).....................................20
XLamp® CXA3050 White LEDs (Rev 4).......................................21
XLamp® CXA3070 White LEDs (Rev 0).......................................22
XLamp® CXA3590 White LEDs (Rev 0).......................................23
XLamp® CXB1304 White LEDs (Rev 2).......................................24
XLamp® CXB1310 White LEDs (Rev 0).......................................25
XLamp® CXB1507 White LEDs (Rev 2).......................................26
XLamp® CXB1512 White LEDs (Rev 2).......................................27
XLamp® CXB1520 White LEDs (Rev 0).......................................28
XLamp® CXB1816 White LEDs (Rev 2).......................................29
XLamp® CXB1820 White LEDs (Rev 3).......................................30
XLamp® CXB1830 White LEDs (Rev 3).......................................31
XLamp® CXB2530 White LEDs (Rev 2).......................................32
XLamp® CXB2540 White LEDs (Rev 2).......................................33
XLamp® CXB3050 White LEDs (Rev 2).......................................34
XLamp® CXB3070 White LEDs (Rev 2).......................................35
XLamp® CXB3590 White LEDs (Rev 2).......................................36
XLamp® MC-E White LEDs (Rev 1)..............................................37
XLamp® MHB-A White LEDs (Rev 4)...........................................38
XLamp® MHD-E White LEDs (Rev 4)...........................................39
XLamp® MHD-G White LEDs (Rev 4)...........................................40
XLamp® MK-R White LEDs (Rev 2)..............................................41
XLamp® ML-B White LEDs (Rev 1)..............................................43
XLamp® ML-C & ML-E White LEDs (Rev 1).................................44
XLamp® ML-E White LEDs (Rev 1)..............................................45
XLamp® MP-L EasyWhite® LEDs (Rev 0)....................................46
XLamp® MT-G EasyWhite® LEDs (Rev 1)....................................47
XLamp® MT-G2 EasyWhite® LEDs (Rev 3)..................................48
XLamp® MX-3 White LEDs (Rev 0)..............................................49
XLamp® MX-6 White LEDs (Rev 2)..............................................50
XLamp® XB-D White LEDs (Rev 2)...............................................51
XLamp® XB-E High Voltage White LEDs (Rev 0)........................52
XLamp® XB-G High Voltage White LEDs (Rev 1)........................53
XLamp® XB-H White LEDs (Rev 1)..............................................54
XLamp® XH-B White LEDs (Rev 2)..............................................55
XLamp® XH-G White LEDs (Rev 3)..............................................56
XLamp® XHP35 White LEDs (Rev 0)...........................................57
XLamp® XHP50 White LEDs (Rev 2)...........................................58
XLamp® XHP70 White LEDs (Rev 3)...........................................59
XLamp® XM-L EasyWhite® LEDs (Rev 1)....................................60
XLamp® XM-L High Voltage White LEDs (Rev 0).......................61
XLamp® XM-L White LEDs (Rev 2)..............................................62
XLamp® XM-L2 White LEDs (Rev 3B)..........................................64
XLamp® XP-E High Efficiency White LEDs (Rev 4).....................66
XLamp® XP-E White LEDs (Rev 3)...............................................67
XLamp® XP-E2 Red, Red-Orange, Amber, Phosphor‑Converted
Amber, Green & Blue LEDs (Rev 2)...............................68
XLamp® XP-E2 White LEDs (Rev 1).............................................70
XLamp® XP-G White LEDs (Rev 7)..............................................71
XLamp® XP-G2 White LEDs (Rev 8)............................................72
XLamp® XP-G3 White LEDs (Rev 1)............................................74
XLamp® XP-L White LEDs (Rev 6)...............................................75
XLamp® XQ-B White LEDs (Rev 1)...............................................76
XLamp® XQ-D White LEDs (Rev 0)..............................................77
XLamp® XQ-E Red, Red-Orange, Phosphor‑Converted Amber,
Green, Blue & Royal Blue LEDs (Rev 0)........................78
XLamp® XQ-E White LEDs (Rev 0)...............................................80
XLamp® XR-E White LEDs (Rev 1)...............................................81
XLamp® XT-E High Voltage White LEDs (Rev 0).........................83
XLamp® XT-E White LEDs (Rev 9)...............................................84
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and
EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental
Protection Agency. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications,
please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
1
LED Components IES LM-80 Testing results
Introduction
This document provides the results of Cree’s IES LM‑80‑2008 (“LM-80”) testing on its LED components. Cree is providing this data so that
the public can verify the reliability of Cree LEDs as part of a complete LED lighting system.
Note that this document provides only the end results of the LM‑80 tests. This is not a complete LM‑80 report. Do not use this document to
submit luminaires or lamps to an agency. Cree customers who need the full LM-80 reports should contact their Cree sales representative.
Cree’s customers who wish to share LM-80 results with their customers have permission to link to this document from their website. This
document is subject to change without notice, so please do not link to a local copy.
NVLAP Accreditation for LM-80-2008 Testing
Cree’s SSL testing laboratory in Durham, NC, USA is accredited by the National Voluntary Laboratory Accreditation Program (NVLAP) to
perform IES LM‑80‑2008 testing. All LM-80-2008 results produced by Cree are generated in Cree’s accredited laboratory. Full details on
Cree’s NVLAP accreditation are available here:
https://www-s.nist.gov/niws/index.cfm?event=directory.search#no-back
This report must not be used to claim product certification, approval, or endorsement by the NVLAP, the National Institute of Standards
and Technology (NIST) or any other agency of the federal government.
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
2
LED Components IES LM-80 Testing results
LED Modules (Rev 3)
Revision:
3 (March 12, 2014)
Description Of LED Light Sources
Module Family
Nominal Light
Output
Applicable Order Codes
Maximum LED
Current*
Maximum Tc**
Maximum LED Tsp
LMR2
650 lm
LMR020-0650-xxxx-xxxxxTW
450 mA
74 °C
85 °C
700 lm
LMR040-0700-xxxx-xxxxxTW
450 mA
77 °C
85 °C
1000 lm
LMR040-1000-xxxx-xxxxxTW
450 mA
75 °C
85 °C
850 lm
LMH020-0850-xxxx-xxxxxTW
440 mA
77 °C
85 °C
1250 lm
LMH020-1250-xxxx-xxxxxTW
440 mA
75 °C
85 °C
2000 lm
LMH020-2000-xxxx-xxxxxTW
450 mA
70 °C
85 °C
3000 lm
LMH020-3000-xxxx-xxxxxTW
450 mA
68 °C
85 °C
2000 lm
LMH060-2000-xxxx-xxxxxTW
450 mA
60 °C
85 °C
2900 lm
LMH060-2900-xxxx-xxxxxTW
450 mA
60 °C
85 °C
LMR4
LMH2
LMH6
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
1
85 °C
85 °C
White: 700 mA
Single-Color: 1000 mA
2700 K
25
7,056 hrs
L90(7k) > 42,300 hrs
L80(7k) > 42,300 hrs
L70(7k) > 42,300 hrs
The following data set is an extended version of the data set above, but has a sample size of less than 25 units. Please refer to the data set
details for the exact number of samples included. This data set is projected according to IES TM-21-11 standards and the Reported L70
lifetimes presented are valid under TM-21-11. However, the use of these extended data sets may not be allowed by a particular program
because of the sample size of the data set. Cree recommends reviewing the details on LM-80 lumen maintenance for each program to
verify that data sets with fewer than 25 samples are considered valid. If not, the data set above should be referenced.
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
1+
85 °C
85 °C
White: 700 mA
Single-Color: 1000 mA
2700 K
21
16,128 hrs
L90(16k) = 27,200 hrs
L80(16k) = 57,400 hrs
L70(16k) = 91,600 hrs
Notes:
* Maximum LED Current: These values are the maximum current that the white and single‑color LEDs will receive during operation in
the specified module.
** Maximum Tc: There is no practical way to directly measure LED Tsp inside Cree’s module without adversely affecting the module’s
optical, thermal or mechanical properties. Therefore, Cree has characterized samples of our LED modules for the temperature
difference between LED Tsp and the Cree‑specified Tc measurement point on the outside of the module. Cree recommends using the
external Tc measurement point and the maximum Tc values listed in the table above.
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
3
LED Components IES LM-80 Testing results
LED Modules (Rev 3) - Continued
Description Of Additional LED Light Sources
The following data sets apply to the additional Cree LED modules in the table below:
Module
Family
Data
Set
LMH2
2
LMH2
Nominal Light
Output
3
Maximum LED
Current*
Applicable Order Codes
Maximum Tc**
Maximum LED Tsp
4000 lm
LMH020-4000-xxxx-xxxxxTW
470 mA
75 °C
105 °C
4000 lm
LMH020-4000-xxxx-xxxxxTW
470 mA
55 °C
85 °C
6000 lm
LMH020-6000-xxxx-xxxxxTW
850 mA
78 °C
85 °C
8000 lm
LMH020-8000-xxxx-xxxxxTW
1000 mA
75 °C
85 °C
No failures occurred during testing.
Additional Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
2
105 °C
105 °C
White: 700 mA
Single-Color: 1000 mA
3500 K
25
6,048 hrs
L90(6k) > 36,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
3
85 °C
85 °C
White: 1000 mA
Single-Color: 1000 mA
3500 K
25
6,048 hrs
L90(6k) > 36,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
Notes:
* Maximum LED Current: These values are the maximum current that the white and single‑color LEDs will receive during operation in
the specified module.
** Maximum Tc: There is no practical way to directly measure LED Tsp inside Cree’s module without adversely affecting the module’s
optical, thermal or mechanical properties. Therefore, Cree has characterized samples of our LED modules for the temperature
difference between LED Tsp and the Cree‑specified Tc measurement point on the outside of the module. Cree recommends using the
external Tc measurement point and the maximum Tc values listed in the table above.
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
4
LED Components IES LM-80 Testing results
XLamp® CXA1304 White LEDs (Rev 4)
Revision:
4 (September 11, 2015)
Description Of LED Light Sources
XLamp® CXA1304 White LEDs (Series: CXA1304)
This LM-80 report is applicable to the following order codes:
CXA1304 9 V
CXA1304-xxxx-xxxCxxxxxxx
CXA1304 18 V
CXA1304-xxxx-xxxFxxxxxxx
CXA1304 36 V
CXA1304-xxxx-xxxNxxxxxxx
No failures occurred during testing.
Results Summary For Tested LED Array
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
3050-4+
105 °C
105 °C
1500 mA
3000 K
22
10,080 hrs
L90(10k) = 35,000 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
3050-5
85 °C
85 °C
1700 mA
3000 K
25
10,584 hrs
L90(10k) = 50,700 hrs
L80(10k) > 63,500 hrs
L70(10k) > 63,500 hrs
3050-6
85 °C
85 °C
2250 mA
3000 K
25
7,056 hrs
L90(7k) = 37,400 hrs
L80(7k) > 42,300 hrs
L70(7k) > 42,300 hrs
3050-3
55 °C
55 °C
2500 mA
3000 K
25
10,080 hrs
L90(10k) = 55,100 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
Scaling For Applicable Products
The data sets cited below meet all the criteria for one LM-80 data set to apply to a range of LED arrays, as defined in the ENERGY STAR®
September 9, 2011 guidelines, Section 3.7.d. The table below defines the current values that apply to each product when scaled from the
tested LM-80 product. The tested product is listed in bold text below.
Applicable Currents
Product Name
Voltage
Class
Product Order Code
Data Set
3050‑4(+)
(105 °C)
Data Set
3050‑5
(85 °C)
Data Set
3050‑6
(85 °C)
Data Set
3050‑3
(55 °C)
CXA1304
9 V
CXA1304-xxxx-xxxCxxxxxxx
460 mA
524 mA
692 mA
768 mA
CXA1304
18 V
CXA1304-xxxx-xxxFxxxxxxx
230 mA
262 mA
346 mA
384 mA
CXA1304
36 V
CXA1304-xxxx-xxxNxxxxxxx
115 mA
131 mA
173 mA
192 mA
CXA3050
36 V
CXA3050-xxxx-xxxNxxxxxxx
1500 mA
1700 mA
2250 mA
2500 mA
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
5
LED Components IES LM-80 Testing results
XLamp® CXA1310 White LEDs (Rev 1A)
Revision:
1A (May 11, 2015)
Description Of LED Light Sources
XLamp CXA1310 White LEDs (Series: CXA1310)
This LM-80 report is applicable to the following order codes:
CXA1310 18 V
CXA1310-xxxx-xxxFxxxxxxx
CXA1310 36 V
CXA1310-xxxx-xxxNxxxxxxx
No failures occurred during testing.
Results Summary For Tested LED Array
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
1520-1
105 °C
105 °C
500 mA
3000 K
24
8,568 hrs
L90(9k) = 37,300 hrs
L80(9k) > 51,400 hrs
L70(9k) > 51,400 hrs
1520-2
85 °C
85 °C
700 mA
3000 K
21
9,072 hrs
L90(9k) = 52,200 hrs
L80(9k) > 54,400 hrs
L70(9k) > 54,400 hrs
Scaling For Applicable Products
The data sets cited below meet all the criteria for one LM-80 data set to apply to a range of LED arrays, as defined in the ENERGY STAR
September 9, 2011 guidelines, Section 3.7.d. The table below defines the current values that apply to each product when scaled from the
tested LM-80 product. The tested product is listed in bold text below.
Applicable Currents
Product Name
Voltage
Class
Product Order Code
Data Set
1520-1
(105 °C)
Data Set
1520-2
(85 °C)
CXA1310
18 V
CXA1310-xxxx-xxxFxxxxxxx
600 mA
840 mA
CXA1310
36 V
CXA1310-xxxx-xxxNxxxxxxx
300 mA
420 mA
CXA1520
36 V
CXA1520-xxxx-xxxNxxxxxxx
500 mA
700 mA
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
6
LED Components IES LM-80 Testing results
XLamp® CXA1507 White LEDs (Rev 2)
Revision:
2 (March 19, 2014)
Description Of LED Light Sources
XLamp CXA1507 White LEDs (Series: CXA1507)
This LM-80 report is applicable to the following order codes:
CXA1507 18 V
CXA1507-xxxx-xxxFxxxxxxx
CXA1507 36 V
CXA1507-xxxx-xxxNxxxxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
1
55 °C
55 °C
200 mA (36 V)
400 mA (18 V)
3000 K
25
6,048 hrs
L95(6k) = 24,700 hrs
L90(6k) > 36,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
85 °C
200 mA (36 V)
400 mA (18 V)
6,048 hrs
L95(6k) = 26,600 hrs
L90(6k) > 36,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
3000 K
25
6,048 hrs
L95(6k) = 19,700 hrs
L90(6k) > 36,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
2
85 °C
3000 K
25
3
105 °C
105 °C
200 mA (36 V)
400 mA (18 V)
4
55 °C
55 °C
375 mA (36 V)
750 mA (18 V)
3000 K
25
6,048 hrs
L90(6k) = 30,200 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
5
85 °C
85 °C
375 mA (36 V)
750 mA (18 V)
3000 K
25
7,056 hrs
L90(7k) = 39,600 hrs
L80(7k) > 42,300 hrs
L70(7k) > 42,300 hrs
The following data sets are extended versions of some of the data sets above, but have sample sizes less than 25 units each. Please refer
to each individual data set for the exact number of samples included. These data sets are projected according to IES TM-21-11 standards
and the Reported L70 lifetimes presented are valid under TM-21-11. However, the use of these extended data sets may not be allowed by
a particular program because of the sample size of the data set. Cree recommends reviewing the details on LM-80 lumen maintenance for
each program to verify that data sets with fewer than 25 samples are considered valid. If not, the data sets above should be referenced.
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
7
LED Components IES LM-80 Testing results
XLamp® CXA1507 White LEDs (Rev 2) - CoNtinued
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
3+
105 °C
105 °C
200 mA (36 V)
400 mA (18 V)
3000 K
20
10,080 hrs
L90(10k) > 60,500 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
4+
55 °C
55 °C
375 mA (36 V)
750 mA (18 V)
3000 K
24
10,080 hrs
L90(10k) > 60,500 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
5+
85 °C
85 °C
375 mA (36 V)
750 mA (18 V)
3000 K
20
9,072 hrs
L90(9k) > 54,400 hrs
L80(9k) > 54,400 hrs
L70(9k) > 54,400 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
8
LED Components IES LM-80 Testing results
XLamp® CXA1510 White LEDs (Rev 4)
Revision:
4 (September 11, 2015)
Description Of LED Light Sources
XLamp CXA1510 White LEDs (Series: CXA1510)
This LM-80 report is applicable to the following order codes:
CXA1510 18 V
CXA1510-xxxx-xxxFxxxxxxx
CXA1510 36 V
CXA1510-xxxx-xxxNxxxxxxx
No failures occurred during testing.
Results Summary For Tested LED Array
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
3050-4+
105 °C
105 °C
1500 mA
3000 K
22
10,080 hrs
L90(10k) = 35,000 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
3050-5
85 °C
85 °C
1700 mA
3000 K
25
10,584 hrs
L90(10k) = 50,700 hrs
L80(10k) > 63,500 hrs
L70(10k) > 63,500 hrs
3050-6
85 °C
85 °C
2250 mA
3000 K
25
7,056 hrs
L90(7k) = 37,400 hrs
L80(7k) > 42,300 hrs
L70(7k) > 42,300 hrs
3050-3
55 °C
55 °C
2500 mA
3000 K
25
10,080 hrs
L90(10k) = 55,100 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
Scaling For Applicable Products
The data sets cited below meet all the criteria for one LM-80 data set to apply to a range of LED arrays, as defined in the ENERGY STAR
September 9, 2011 guidelines, Section 3.7.d. The table below defines the current values that apply to each product when scaled from the
tested LM-80 product. The tested product is listed in bold text below.
Applicable Currents
Product Name
Voltage
Class
CXA1510
18 V
Product Order Code
Data Set
3050‑4(+)
(105 °C)
Data Set
3050‑5
(85 °C)
Data Set
3050‑6
(85 °C)
Data Set
3050‑3
(55 °C)
CXA1510-xxxx-xxxFxxxxxxx
468 mA
530 mA
702 mA
780 mA
CXA1510
36 V
CXA1510-xxxx-xxxNxxxxxxx
234 mA
265 mA
351 mA
390 mA
CXA3050
36 V
CXA3050-xxxx-xxxNxxxxxxx
1500 mA
1700 mA
2250 mA
2500 mA
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
9
LED Components IES LM-80 Testing results
XLamp® CXA1512 White LEDs (Rev 4)
Revision:
4 (September 11, 2015)
Description Of LED Light Sources
XLamp CXA1512 White LEDs (Series: CXA1512)
This LM-80 report is applicable to the following order codes:
CXA1512 18 V
CXA1512-xxxx-xxxFxxxxxxx
CXA1512 36 V
CXA1512-xxxx-xxxNxxxxxxx
No failures occurred during testing.
Results Summary For Tested LED Array
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
3050-4+
105 °C
105 °C
1500 mA
3000 K
22
10,080 hrs
L90(10k) = 35,000 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
3050-5
85 °C
85 °C
1700 mA
3000 K
25
10,584 hrs
L90(10k) = 50,700 hrs
L80(10k) > 63,500 hrs
L70(10k) > 63,500 hrs
3050-6
85 °C
85 °C
2250 mA
3000 K
25
7,056 hrs
L90(7k) = 37,400 hrs
L80(7k) > 42,300 hrs
L70(7k) > 42,300 hrs
3050-3
55 °C
55 °C
2500 mA
3000 K
25
10,080 hrs
L90(10k) = 55,100 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
Scaling For Applicable Products
The data sets cited below meet all the criteria for one LM-80 data set to apply to a range of LED arrays, as defined in the ENERGY STAR
September 9, 2011 guidelines, Section 3.7.d. The table below defines the current values that apply to each product when scaled from the
tested LM-80 product. The tested product is listed in bold text below.
Applicable Currents
Product Name
Voltage
Class
CXA1512
18 V
Product Order Code
Data Set
3050‑4(+)
(105 °C)
Data Set
3050‑5
(85 °C)
Data Set
3050‑6
(85 °C)
Data Set
3050‑3
(55 °C)
CXA1512-xxxx-xxxFxxxxxxx
692 mA
784 mA
1038 mA
1154 mA
CXA1512
36 V
CXA1512-xxxx-xxxNxxxxxxx
346 mA
392 mA
519 mA
577 mA
CXA3050
36 V
CXA3050-xxxx-xxxNxxxxxxx
1500 mA
1700 mA
2250 mA
2500 mA
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
10
LED Components IES LM-80 Testing results
XLamp® CXA1520 White LEDs (Rev 1A)
Revision:
1A (May 11, 2015)
Description Of LED Light Sources
XLamp CXA1520 White LEDs (Series: CXA1520)
This LM-80 report is applicable to the following order codes:
CXA1520-xxxx-xxxxxxxxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
1520-1
105 °C
105 °C
500 mA
3000 K
24
8,568 hrs
L90(9k) = 37,300 hrs
L80(9k) > 51,400 hrs
L70(9k) > 51,400 hrs
1520-2
85 °C
85 °C
700 mA
3000 K
21
9,072 hrs
L90(9k) = 52,200 hrs
L80(9k) > 54,400 hrs
L70(9k) > 54,400 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
11
LED Components IES LM-80 Testing results
XLamp® CXA1816 White LEDs (Rev 4)
Revision:
4 (September 11, 2015)
Description Of LED Light Sources
XLamp CXA1816 White LEDs (Series: CXA1816)
This LM-80 report is applicable to the following order codes:
CXA1816-xxxx-xxxxxxxxxxx
No failures occurred during testing.
Results Summary For Tested LED Array
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
3050-4+
105 °C
105 °C
1500 mA
3000 K
22
10,080 hrs
L90(10k) = 35,000 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
3050-5
85 °C
85 °C
1700 mA
3000 K
25
10,584 hrs
L90(10k) = 50,700 hrs
L80(10k) > 63,500 hrs
L70(10k) > 63,500 hrs
3050-6
85 °C
85 °C
2250 mA
3000 K
25
7,056 hrs
L90(7k) = 37,400 hrs
L80(7k) > 42,300 hrs
L70(7k) > 42,300 hrs
3050-3
55 °C
55 °C
2500 mA
3000 K
25
10,080 hrs
L90(10k) = 55,100 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
Scaling For Applicable Products
The data sets cited below meet all the criteria for one LM-80 data set to apply to a range of LED arrays, as defined in the ENERGY STAR
September 9, 2011 guidelines, Section 3.7.d. The table below defines the current values that apply to each product when scaled from the
tested LM-80 product. The tested product is listed in bold text below.
Applicable Currents
Product Name
Voltage
Class
Product Order Code
Data Set
3050‑4(+)
(105 °C)
Data Set
3050‑5
(85 °C)
Data Set
3050‑6
(85 °C)
Data Set
3050‑3
(55 °C)
CXA1816
36 V
CXA1816-xxxx-xxxNxxxxxxx
462 mA
523 mA
692 mA
769 mA
CXA3050
36 V
CXA3050-xxxx-xxxNxxxxxxx
1500 mA
1700 mA
2250 mA
2500 mA
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
12
LED Components IES LM-80 Testing results
XLamp® CXA1820 White LEDs (Rev 4)
Revision:
4 (September 11, 2015)
Description Of LED Light Sources
XLamp CXA1820 White LEDs (Series: CXA1820)
This LM-80 report is applicable to the following order codes:
CXA1820-xxxx-xxxxxxxxxxx
No failures occurred during testing.
Results Summary For Tested LED Array
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
3050-4+
105 °C
105 °C
1500 mA
3000 K
22
10,080 hrs
L90(10k) = 35,000 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
3050-5
85 °C
85 °C
1700 mA
3000 K
25
10,584 hrs
L90(10k) = 50,700 hrs
L80(10k) > 63,500 hrs
L70(10k) > 63,500 hrs
3050-6
85 °C
85 °C
2250 mA
3000 K
25
7,056 hrs
L90(7k) = 37,400 hrs
L80(7k) > 42,300 hrs
L70(7k) > 42,300 hrs
3050-3
55 °C
55 °C
2500 mA
3000 K
25
10,080 hrs
L90(10k) = 55,100 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
Scaling For Applicable Products
The data sets cited below meet all the criteria for one LM-80 data set to apply to a range of LED arrays, as defined in the ENERGY STAR
September 9, 2011 guidelines, Section 3.7.d. The table below defines the current values that apply to each product when scaled from the
tested LM-80 product. The tested product is listed in bold text below.
Applicable Currents
Product Name
Voltage
Class
Product Order Code
Data Set
3050‑4(+)
(105 °C)
Data Set
3050‑5
(85 °C)
Data Set
3050‑6
(85 °C)
Data Set
3050‑3
(55 °C)
CXA1820
36 V
CXA1820-xxxx-xxxNxxxxxxx
577 mA
654 mA
865 mA
962 mA
CXA3050
36 V
CXA3050-xxxx-xxxNxxxxxxx
1500 mA
1700 mA
2250 mA
2500 mA
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
13
LED Components IES LM-80 Testing results
XLamp® CXA1830 White LEDs (Rev 4)
Revision:
4 (September 11, 2015)
Description Of LED Light Sources
XLamp CXA1830 White LEDs (Series: CXA1830)
This LM-80 report is applicable to the following order codes:
CXA1830-xxxx-xxxxxxxxxxx
No failures occurred during testing.
Results Summary For Tested LED Array
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
3050-4+
105 °C
105 °C
1500 mA
3000 K
22
10,080 hrs
L90(10k) = 35,000 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
3050-5
85 °C
85 °C
1700 mA
3000 K
25
10,584 hrs
L90(10k) = 50,700 hrs
L80(10k) > 63,500 hrs
L70(10k) > 63,500 hrs
3050-6
85 °C
85 °C
2250 mA
3000 K
25
7,056 hrs
L90(7k) = 37,400 hrs
L80(7k) > 42,300 hrs
L70(7k) > 42,300 hrs
3050-3
55 °C
55 °C
2500 mA
3000 K
25
10,080 hrs
L90(10k) = 55,100 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
Scaling For Applicable Products
The data sets cited below meet all the criteria for one LM-80 data set to apply to a range of LED arrays, as defined in the ENERGY STAR
September 9, 2011 guidelines, Section 3.7.d. The table below defines the current values that apply to each product when scaled from the
tested LM-80 product. The tested product is listed in bold text below.
Applicable Currents
Product Name
Voltage
Class
Product Order Code
Data Set
3050‑4(+)
(105 °C)
Data Set
3050‑5
(85 °C)
Data Set
3050‑6
(85 °C)
Data Set
3050‑3
(55 °C)
CXA1830
36 V
CXA1830-xxxx-xxxNxxxxxxx
662 mA
743 mA
977 mA
1087 mA
CXA3050
36 V
CXA3050-xxxx-xxxNxxxxxxx
1500 mA
1700 mA
2250 mA
2500 mA
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
14
LED Components IES LM-80 Testing results
XLamp® CXA1850 White LEDs (Rev 1A)
Revision:
1A (May 11, 2015)
Description Of LED Light Sources
XLamp CXA1850 White LEDs (Series: CXA1850)
This LM-80 report is applicable to the following order codes:
CXA1850-xxxx-xxxxxxxxxxx
No failures occurred during testing.
Results Summary For Tested LED Array
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
2590-1
105 °C
105 °C
700 mA
3000 K
25
7,056 hrs
L90(7k) > 42,300 hrs
L80(7k) > 42,300 hrs
L70(7k) > 42,300 hrs
2590-2
105 °C
105 °C
1050 mA
3000 K
20
6,048 hrs
L90(6k) > 36,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
2590-3
85 °C
85 °C
1400 mA
3000 K
25
7,560 hrs
L90(8k) > 45,400 hrs
L80(8k) > 45,400 hrs
L70(8k) > 45,400 hrs
Scaling For Applicable Products
The data sets cited below meet all the criteria for one LM-80 data set to apply to a range of LED arrays, as defined in the ENERGY STAR
September 9, 2011 guidelines, Section 3.7.d. The table below defines the current values that apply to each product when scaled from the
tested LM-80 product. The tested product is listed in bold text below.
Applicable Currents
Product Name
Voltage
Class
CXA1850
CXA2590
Product Order Code
Data Set
2590-1
(105 °C)
Data Set
2590-2
(105 °C)
Data Set
2590-3
(85 °C)
36 V
CXA1850-xxxx-xxxNxxxxxxx
774 mA
1159 mA
1543 mA
72 V
CXA2590-xxxx-xxxRxxxxxxx
700 mA
1050 mA
1400 mA
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
15
LED Components IES LM-80 Testing results
XLamp® CXA2011 White LEDs (Rev 0)
Revision:
0 (May 18, 2012)
Description Of LED Light Sources
XLamp CXA2011 White LEDs (Series: CXA2011)
This LM-80 report is applicable to the following order codes:
CXA2011-xxxx-xxxxxxxxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
1
85 °C
85 °C
300 mA
3000 K
25
6,048 hrs
L90(6k) = 15,100 hrs
L80(6k) = 28,800 hrs
L70(6k) > 36,300 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
16
LED Components IES LM-80 Testing results
XLamp® CXA2520 White LEDs (Rev 4)
Revision:
4 (September 11, 2015)
Description Of LED Light Sources
XLamp CXA2520 White LEDs (Series: CXA2520)
This LM-80 report is applicable to the following order codes:
CXA2520-xxxx-xxxxxxxxxxx
No failures occurred during testing.
Results Summary For Tested LED Array
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
3050-4+
105 °C
105 °C
1500 mA
3000 K
22
10,080 hrs
L90(10k) = 35,000 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
3050-5
85 °C
85 °C
1700 mA
3000 K
25
10,584 hrs
L90(10k) = 50,700 hrs
L80(10k) > 63,500 hrs
L70(10k) > 63,500 hrs
3050-6
85 °C
85 °C
2250 mA
3000 K
25
7,056 hrs
L90(7k) = 37,400 hrs
L80(7k) > 42,300 hrs
L70(7k) > 42,300 hrs
3050-3
55 °C
55 °C
2500 mA
3000 K
25
10,080 hrs
L90(10k) = 55,100 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
Scaling For Applicable Products
The data sets cited below meet all the criteria for one LM-80 data set to apply to a range of LED arrays, as defined in the ENERGY STAR
September 9, 2011 guidelines, Section 3.7.d. The table below defines the current values that apply to each product when scaled from the
tested LM-80 product. The tested product is listed in bold text below.
Applicable Currents
Product Name
Voltage
Class
Product Order Code
Data Set
3050‑4(+)
(105 °C)
Data Set
3050‑5
(85 °C)
Data Set
3050‑6
(85 °C)
Data Set
3050‑3
(55 °C)
CXA2520
36 V
CXA2520-xxxx-xxxNxxxxxxx
624 mA
707 mA
936 mA
1040 mA
CXA3050
36 V
CXA3050-xxxx-xxxNxxxxxxx
1500 mA
1700 mA
2250 mA
2500 mA
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
17
LED Components IES LM-80 Testing results
XLamp® CXA2530 White LEDs (Rev 4)
Revision:
4 (September 11, 2015)
Description Of LED Light Sources
XLamp CXA2530 White LEDs (Series: CXA2530)
This LM-80 report is applicable to the following order codes:
CXA2530-xxxx-xxxxxxxxxxx
No failures occurred during testing.
Results Summary For Tested LED Array
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
3050-4+
105 °C
105 °C
1500 mA
3000 K
22
10,080 hrs
L90(10k) = 35,000 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
3050-5
85 °C
85 °C
1700 mA
3000 K
25
10,584 hrs
L90(10k) = 50,700 hrs
L80(10k) > 63,500 hrs
L70(10k) > 63,500 hrs
3050-6
85 °C
85 °C
2250 mA
3000 K
25
7,056 hrs
L90(7k) = 37,400 hrs
L80(7k) > 42,300 hrs
L70(7k) > 42,300 hrs
3050-3
55 °C
55 °C
2500 mA
3000 K
25
10,080 hrs
L90(10k) = 55,100 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
Scaling For Applicable Products
The data sets cited below meet all the criteria for one LM-80 data set to apply to a range of LED arrays, as defined in the ENERGY STAR
September 9, 2011 guidelines, Section 3.7.d. The table below defines the current values that apply to each product when scaled from the
tested LM-80 product. The tested product is listed in bold text below.
Applicable Currents
Product Name
Voltage
Class
Product Order Code
Data Set
3050‑4(+)
(105 °C)
Data Set
3050‑5
(85 °C)
Data Set
3050‑6
(85 °C)
Data Set
3050‑3
(55 °C)
CXA2530
36 V
CXA2530-xxxx-xxxNxxxxxxx
808 mA
915 mA
1212 mA
1346 mA
CXA3050
36 V
CXA3050-xxxx-xxxNxxxxxxx
1500 mA
1700 mA
2250 mA
2500 mA
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
18
LED Components IES LM-80 Testing results
XLamp® CXA2540 White LEDs (Rev 4)
Revision:
4 (September 11, 2015)
Description Of LED Light Sources
XLamp CXA2540 White LEDs (Series: CXA2540)
This LM-80 report is applicable to the following order codes:
CXA2540-xxxx-xxxxxxxxxxx
No failures occurred during testing.
Results Summary For Tested LED Array
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
3050-4+
105 °C
105 °C
1500 mA
3000 K
22
10,080 hrs
L90(10k) = 35,000 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
3050-5
85 °C
85 °C
1700 mA
3000 K
25
10,584 hrs
L90(10k) = 50,700 hrs
L80(10k) > 63,500 hrs
L70(10k) > 63,500 hrs
3050-6
85 °C
85 °C
2250 mA
3000 K
25
7,056 hrs
L90(7k) = 37,400 hrs
L80(7k) > 42,300 hrs
L70(7k) > 42,300 hrs
3050-3
55 °C
55 °C
2500 mA
3000 K
25
10,080 hrs
L90(10k) = 55,100 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
Scaling For Applicable Products
The data sets cited below meet all the criteria for one LM-80 data set to apply to a range of LED arrays, as defined in the ENERGY STAR
September 9, 2011 guidelines, Section 3.7.d. The table below defines the current values that apply to each product when scaled from the
tested LM-80 product. The tested product is listed in bold text below.
Applicable Currents
Product Name
Voltage
Class
Product Order Code
Data Set
3050‑4(+)
(105 °C)
Data Set
3050‑5
(85 °C)
Data Set
3050‑6
(85 °C)
Data Set
3050‑3
(55 °C)
CXA2540
36 V
CXA2540-xxxx-xxxNxxxxxxx
1139 mA
1281 mA
1693 mA
1903 mA
CXA3050
36 V
CXA3050-xxxx-xxxNxxxxxxx
1500 mA
1700 mA
2250 mA
2500 mA
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
19
LED Components IES LM-80 Testing results
XLamp® CXA2590 White LEDs (Rev 1A)
Revision:
1A (May 11, 2015)
Description Of LED Light Sources
XLamp CXA2590 White LEDs (Series: CXA2590)
This LM-80 report is applicable to the following order codes:
CXA2590-xxxx-xxxxxxxxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
2590-1
105 °C
105 °C
700 mA
3000 K
25
7,056 hrs
L90(7k) > 42,300 hrs
L80(7k) > 42,300 hrs
L70(7k) > 42,300 hrs
2590-2
105 °C
105 °C
1050 mA
3000 K
20
6,048 hrs
L90(6k) > 36,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
2590-3
85 °C
85 °C
1400 mA
3000 K
25
7,560 hrs
L90(8k) > 45,400 hrs
L80(8k) > 45,400 hrs
L70(8k) > 45,400 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
20
LED Components IES LM-80 Testing results
XLamp® CXA3050 White LEDs (Rev 4)
Revision:
4 (September 11, 2015)
Description Of LED Light Sources
XLamp CXA3050 White LEDs (Series: CXA3050)
This LM-80 report is applicable to the following order codes:
CXA3050-xxxx-xxxxxxxxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
3050-4
105 °C
105 °C
1500 mA
3000 K
25
8,064 hrs
L90(7k) = 27,000 hrs
L80(7k) > 48,400 hrs
L70(7k) > 48,400 hrs
3050-5
85 °C
85 °C
1700 mA
3000 K
25
10,584 hrs
L90(10k) = 50,700 hrs
L80(10k) > 63,500 hrs
L70(10k) > 63,500 hrs
3050-6
85 °C
85 °C
2250 mA
3000 K
25
7,056 hrs
L90(7k) = 37,400 hrs
L80(7k) > 42,300 hrs
L70(7k) > 42,300 hrs
3050-3
55 °C
55 °C
2500 mA
3000 K
25
10,080 hrs
L90(10k) = 55,100 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
The following data sets are extended versions of some of the data sets above, but have sample sizes less than 25 units each. Please refer
to each individual data set for the exact number of samples included. These data sets are projected according to IES TM-21-11 standards
and the Reported L70 lifetimes presented are valid under TM-21-11. However, the use of these extended data sets may not be allowed by
a particular program because of the sample size of the data set. Cree recommends reviewing the details on LM-80 lumen maintenance for
each program to verify that data sets with fewer than 25 samples are considered valid. If not, the data sets above should be referenced.
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample Count
Test Duration
Reported TM-21
Lifetimes
3050-4+
105 °C
105 °C
1500 mA
3000 K
22
10,080 hrs
L90(10k) = 35,000 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
21
LED Components IES LM-80 Testing results
XLamp® CXA3070 White LEDs (Rev 0)
Revision:
0 (September 5, 2014)
Description Of LED Light Sources
XLamp CXA3070 White LEDs (Series: CXA3070)
This LM-80 report is applicable to the following order codes:
CXA3070-xxxx-xxxxxxxxxxx
No failures occurred during testing.
Results Summary For Tested LED Array
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
3590-1
105 °C
105 °C
1050 mA
3000 K
25
6,048 hrs
L90(6k) > 36,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
3590-2
85 °C
85 °C
1400 mA
3000 K
25
6,046 hrs
L90(6k) > 36,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
Scaling For Applicable Products
The data sets cited below meet all the criteria for one LM-80 data set to apply to a range of LED arrays, as defined in the ENERGY STAR
September 9, 2011 guidelines, Section 3.7.d. The table below defines the current values that apply to each product when scaled from the
tested LM-80 product. The tested product is listed in bold text below.
Applicable Currents
Product Name
Voltage
Class
Product Order Code
Data Set
3590-1
(105 °C)
Data Set
3590-2
(85° C)
CXA3070
36 V
CXA3070-xxxx-xxxNxxxxxxx
1335 mA
1794 mA
CXA3590
72 V
CXA3590-xxxx-xxxRxxxxxxx
1050 mA
1400 mA
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
22
LED Components IES LM-80 Testing results
XLamp® CXA3590 White LEDs (Rev 0)
Revision:
0 (September 5, 2014)
Description Of LED Light Sources
XLamp CXA3590 White LEDs (Series: CXA3590)
This LM-80 report is applicable to the following order codes:
CXA3590 36 V
CXA3590-xxxx-xxxNxxxxxxx
CXA3590 72 V
CXA3590-xxxx-xxxRxxxxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
3590-1
105 °C
105 °C
1050 mA
3000 K
25
6,048 hrs
L90(6k) > 36,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
3590-2
85 °C
85 °C
1400 mA
3000 K
25
6,046 hrs
L90(6k) > 36,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
Scaling For Applicable Products
The data sets cited below meet all the criteria for one LM-80 data set to apply to a range of LED arrays, as defined in the ENERGY STAR
September 9, 2011 guidelines, Section 3.7.d. The table below defines the current values that apply to each product when scaled from the
tested LM-80 product. The tested product is listed in bold text below.
Applicable Currents
Product Name
Voltage
Class
Product Order Code
Data Set
3590-1
(105 °C)
Data Set
3590-2
(85° C)
CXA3590
36 V
CXA3590-xxxx-xxxNxxxxxxx
2100 mA
2800 mA
CXA3590
72 V
CXA3590-xxxx-xxxRxxxxxxx
1050 mA
1400 mA
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
23
LED Components IES LM-80 Testing results
XLamp® CXB1304 White LEDs (Rev 2)
Revision:
2 (May 5, 2016)
Description Of LED Light Sources
XLamp CXB1304 White LEDs (Series: CXB1304)
This LM-80 report is applicable to the following order codes:
CXB1304 9 V
CXB1304-xxxx-xxxCxxxxxxx
CXB1304 18 V
CXB1304-xxxx-xxxFxxxxxxx
CXB1304 36 V
CXB1304-xxxx-xxxNxxxxxxx
No failures occurred during testing.
Results Summary For Tested LED Arrays
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
B2530-1
105 °C
105 °C
1200 mA
3000 K
10
8,568 hrs
L90(9k) > 47,100 hrs
L80(9k) > 47,100 hrs
L70(9k) > 47,100 hrs
B3050-1
105 °C
105 °C
1500 mA
3000 K
10
10,080 hrs
L90(10k) > 55,400 hrs
L80(10k) > 55,400 hrs
L70(10k) > 55,400 hrs
B2530-2
85 °C
85 °C
1600 mA
3000 K
10
8,568 hrs
L90(9k) > 47,100 hrs
L80(9k) > 47,100 hrs
L70(9k) > 47,100 hrs
B3050-2
85 °C
85 °C
2500 mA
3000 K
10
10,080 hrs
L90(10k) > 55,400 hrs
L80(10k) > 55,400 hrs
L70(10k) > 55,400 hrs
Scaling For Applicable Products
The data sets cited below meet all the criteria for one LM-80 data set to apply to a range of LED arrays, as defined in the ENERGY STAR
September 9, 2011 guidelines, Section 3.7.d. The table below defines the current values that apply to each product when scaled from the
tested LM-80 products. The tested products are listed in bold text below.
Applicable Currents
Product Name
Voltage
Class
Product Order Code
Data Set
B2530-1
(105 °C)
Data Set
B2530-2
(85 °C)
Data Set
B3050-1
(105 °C)
Data Set
B3050-2
(85 °C)
CXB1304
9 V
CXB1304-xxxx-xxxCxxxxxxx
684 mA
916 mA
460 mA
768 mA
CXB1304
18 V
CXB1304-xxxx-xxxFxxxxxxx
342 mA
458 mA
230 mA
384 mA
CXB1304
36 V
CXB1304-xxxx-xxxNxxxxxxx
171 mA
229 mA
115 mA
192 mA
CXB2530
36 V
CXB2530-xxxx-xxxNxxxxxxx
1200 mA
1600 mA
CXB3050
36 V
CXB3050-xxxx-xxxNxxxxxxx
1500 mA
2500 mA
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
24
LED Components IES LM-80 Testing results
XLamp® CXB1310 White LEDs (Rev 0)
Revision:
0 (March 29, 2016)
Description Of LED Light Sources
XLamp CXB1310 White LEDs (Series: CXB1310)
This LM-80 report is applicable to the following order codes:
CXB1310 18 V
CXB1310-xxxx-xxxFxxxxxxx
CXB1310 36 V
CXB1310-xxxx-xxxNxxxxxxx
No failures occurred during testing.
Results Summary For Tested LED Array
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
1520-1
105 °C
105 °C
500 mA
3000 K
24
8,568 hrs
L90(9k) = 37,300 hrs
L80(9k) > 51,400 hrs
L70(9k) > 51,400 hrs
1520-2
85 °C
85 °C
700 mA
3000 K
21
9,072 hrs
L90(9k) = 52,200 hrs
L80(9k) > 54,400 hrs
L70(9k) > 54,400 hrs
Scaling For Applicable Products
The data sets cited below meet all the criteria for one LM-80 data set to apply to a range of LED arrays, as defined in the ENERGY STAR
September 9, 2011 guidelines, Section 3.7.d. The table below defines the current values that apply to each product when scaled from the
tested LM-80 product. The tested product is listed in bold text below.
Applicable Currents
Product Name
Voltage
Class
CXB1310
18 V
CXB1310
36 V
CXA1520
36 V
CXA1520-xxxx-xxxNxxxxxxx
Data Set
1520-1
(105 °C)
Data Set
1520-2
(85 °C)
CXB1310-xxxx-xxxFxxxxxxx
970 mA
1400 mA
CXB1310-xxxx-xxxNxxxxxxx
485 mA
700 mA
500 mA
700 mA
Product Order Code
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
25
LED Components IES LM-80 Testing results
XLamp® CXB1507 White LEDs (Rev 2)
Revision:
2 (May 5, 2016)
Description Of LED Light Sources
XLamp CXB1507 White LEDs (Series: CXB1507)
This LM-80 report is applicable to the following order codes:
CXB1507 18 V
CXB1507-xxxx-xxxFxxxxxxx
CXB1507 36 V
CXB1507-xxxx-xxxNxxxxxxx
No failures occurred during testing.
Results Summary For Tested LED Array
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
B2530-1
105 °C
105 °C
1200 mA
3000 K
10
8,568 hrs
L90(9k) > 47,100 hrs
L80(9k) > 47,100 hrs
L70(9k) > 47,100 hrs
B3050-1
105 °C
105 °C
1500 mA
3000 K
10
10,080 hrs
L90(10k) > 55,400 hrs
L80(10k) > 55,400 hrs
L70(10k) > 55,400 hrs
B3050-2
85 °C
85 °C
2500 mA
3000 K
10
10,080 hrs
L90(10k) > 55,400 hrs
L80(10k) > 55,400 hrs
L70(10k) > 55,400 hrs
Scaling For Applicable Products
The data sets cited below meet all the criteria for one LM-80 data set to apply to a range of LED arrays, as defined in the ENERGY STAR
September 9, 2011 guidelines, Section 3.7.d. The table below defines the current values that apply to each product when scaled from the
tested LM-80 product. The tested product is listed in bold text below.
Applicable Currents
Product Name
Voltage
Class
Product Order Code
Data Set
B2530-1
(105 °C)
Data Set
B3050-1
(105 °C)
Data Set
B3050-2
(85 °C)
CXB1507
18 V
CXB1507-xxxx-xxxFxxxxxxx
686 mA
462 mA
750 mA
231 mA
375 mA
1500 mA
2500 mA
CXB1507
36 V
CXB1507-xxxx-xxxNxxxxxxx
343 mA
CXB2530
36 V
CXB2530-xxxx-xxxNxxxxxxx
1200 mA
CXB3050
36 V
CXB3050-xxxx-xxxNxxxxxxx
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
26
LED Components IES LM-80 Testing results
XLamp® CXB1512 White LEDs (Rev 2)
Revision:
2 (May 5, 2016)
Description Of LED Light Sources
XLamp CXB1512 White LEDs (Series: CXB1512)
This LM-80 report is applicable to the following order codes:
CXB1512 18 V
CXB1512-xxxx-xxxFxxxxxxx
CXB1512 36 V
CXB1512-xxxx-xxxNxxxxxxx
No failures occurred during testing.
Results Summary For Tested LED Array
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
B3050-1
105 °C
105 °C
1500 mA
3000 K
10
10,080 hrs
L90(10k) > 55,400 hrs
L80(10k) > 55,400 hrs
L70(10k) > 55,400 hrs
B3050-2
85 °C
85 °C
2500 mA
3000 K
10
10,080 hrs
L90(10k) > 55,400 hrs
L80(10k) > 55,400 hrs
L70(10k) > 55,400 hrs
Scaling For Applicable Products
The data sets cited below meet all the criteria for one LM-80 data set to apply to a range of LED arrays, as defined in the ENERGY STAR
September 9, 2011 guidelines, Section 3.7.d. The table below defines the current values that apply to each product when scaled from the
tested LM-80 product. The tested product is listed in bold text below.
Applicable Currents
Product Name
Voltage
Class
CXB1512
CXB1512
CXB3050
Product Order Code
Data Set
B3050-1
(105 °C)
Data Set
B3050-2
(85 °C)
18 V
CXB1512-xxxx-xxxFxxxxxxx
900 mA
1200 mA
36 V
CXB1512-xxxx-xxxNxxxxxxx
450 mA
600 mA
36 V
CXB3050-xxxx-xxxNxxxxxxx
1500 mA
2500 mA
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
27
LED Components IES LM-80 Testing results
XLamp® CXB1520 White LEDs (Rev 0)
Revision:
0 (March 29, 2016)
Description Of LED Light Sources
XLamp CXB1520 White LEDs (Series: CXB1520)
This LM-80 report is applicable to the following order codes:
CXB1520-xxxx-xxxxxxxxxxx
No failures occurred during testing.
Results Summary For Tested LED Array
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
2590-1
105 °C
105 °C
700 mA
3000 K
25
7,056 hrs
L90(7k) > 42,300 hrs
L80(7k) > 42,300 hrs
L70(7k) > 42,300 hrs
2590-2
105 °C
105 °C
1050 mA
3000 K
20
6,048 hrs
L90(6k) > 36,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
2590-3
85 °C
85 °C
1400 mA
3000 K
25
7,560 hrs
L90(8k) > 45,400 hrs
L80(8k) > 45,400 hrs
L70(8k) > 45,400 hrs
Scaling For Applicable Products
The data sets cited below meet all the criteria for one LM-80 data set to apply to a range of LED arrays, as defined in the ENERGY STAR
September 9, 2011 guidelines, Section 3.7.d. The table below defines the current values that apply to each product when scaled from the
tested LM-80 product. The tested product is listed in bold text below.
Applicable Currents
Product Name
Voltage
Class
CXB1520
CXA2590
Product Order Code
Data Set
2590-1
(105 °C)
Data Set
2590-2
(105 °C)
Data Set
2590-3
(85 °C)
36 V
CXB1520-xxxx-xxxNxxxxxxx
616 mA
925 mA
1234 mA
72 V
CXA2590-xxxx-xxxRxxxxxxx
700 mA
1050 mA
1400 mA
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
28
LED Components IES LM-80 Testing results
XLamp® CXB1816 White LEDs (Rev 2)
Revision:
2 (May 5, 2016)
Description Of LED Light Sources
XLamp CXB1816 White LEDs (Series: CXB1816)
This LM-80 report is applicable to the following order codes:
CXB1816-xxxx-xxxxxxxxxxx
No failures occurred during testing.
Results Summary For Tested LED Arrays
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
B2530-1
105 °C
105 °C
1200 mA
3000 K
10
8,568 hrs
L90(9k) > 47,100 hrs
L80(9k) > 47,100 hrs
L70(9k) > 47,100 hrs
B3050-1
105 °C
105 °C
1500 mA
3000 K
10
10,080 hrs
L90(10k) > 55,400 hrs
L80(10k) > 55,400 hrs
L70(10k) > 55,400 hrs
B2530-2
85 °C
85 °C
1600 mA
3000 K
10
8,568 hrs
L90(9k) > 47,100 hrs
L80(9k) > 47,100 hrs
L70(9k) > 47,100 hrs
B3050-2
85 °C
85 °C
2500 mA
3000 K
10
10,080 hrs
L90(10k) > 55,400 hrs
L80(10k) > 55,400 hrs
L70(10k) > 55,400 hrs
Scaling For Applicable Products
The data sets cited below meet all the criteria for one LM-80 data set to apply to a range of LED arrays, as defined in the ENERGY STAR
September 9, 2011 guidelines, Section 3.7.d. The table below defines the current values that apply to each product when scaled from the
tested LM-80 products. The tested products are listed in bold text below.
Applicable Currents
Product Name
Voltage
Class
Product Order Code
Data Set
B2530-1
(105 °C)
Data Set
B2530-2
(85 °C)
673 mA
900 mA
CXB1816
36 V
CXB1816-xxxx-xxxNxxxxxxx
CXB1816
36 V
CXB1816-xxxx-xxxNxxxxxxx
CXB2530
36V
CXB2530-xxxx-xxxNxxxxxxx
CXB3050
36 V
CXB3050-xxxx-xxxNxxxxxxx
1200 mA
Data Set
B3050-1
(105 °C)
Data Set
B3050-2
(85 °C)
462 mA
769 mA
1500 mA
2500 mA
1600 mA
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
29
LED Components IES LM-80 Testing results
XLamp® CXB1820 White LEDs (Rev 3)
Revision:
3 (June 16, 2016)
Description Of LED Light Sources
XLamp CXB1820 White LEDs (Series: CXB1820)
This LM-80 report is applicable to the following order codes:
CXB1820-xxxx-xxxxxxxxxxx
No failures occurred during testing.
Results Summary For Tested LED Array
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
B2530-1
105 °C
105 °C
1200 mA
3000 K
10
8,568 hrs
L90(9k) > 47,100 hrs
L80(9k) > 47,100 hrs
L70(9k) > 47,100 hrs
B3050-1
105 °C
105 °C
1500 mA
3000 K
10
10,080 hrs
L90(10k) > 55,400 hrs
L80(10k) > 55,400 hrs
L70(10k) > 55,400 hrs
B3050-2
85 °C
85 °C
2500 mA
3000 K
10
10,080 hrs
L90(10k) > 55,400 hrs
L80(10k) > 55,400 hrs
L70(10k) > 55,400 hrs
Scaling For Applicable Products
The data sets cited below meet all the criteria for one LM-80 data set to apply to a range of LED arrays, as defined in the ENERGY STAR
September 9, 2011 guidelines, Section 3.7.d. The table below defines the current values that apply to each product when scaled from the
tested LM-80 product. The tested product is listed in bold text below.
Applicable Currents
Product Name
Voltage
Class
Product Order Code
Data Set
2530-1
(105 °C)
CXB1820
36 V
CXB1820-xxxx-xxxNxxxxxxx
681 mA
CXB1820
36 V
CXB1820-xxxx-xxxNxxxxxxx
CXB2530
36 V
CXB2530-xxxx-xxxNxxxxxxx
CXB3050
36 V
CXB3050-xxxx-xxxNxxxxxxx
Data Set
B3050-1
(105 °C)
Data Set
B3050-2
(85 °C)
630 mA
1044 mA
1500 mA
2500 mA
1200 mA
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
30
LED Components IES LM-80 Testing results
XLamp® CXB1830 White LEDs (Rev 3)
Revision:
3 (June 16, 2016)
Description Of LED Light Sources
XLamp CXB1830 White LEDs (Series: CXB1830)
This LM-80 report is applicable to the following order codes:
CXB1830-xxxx-xxxxxxxxxxx
No failures occurred during testing.
Results Summary For Tested LED Array
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
B2530-1
105 °C
105 °C
1200 mA
3000 K
10
8,568 hrs
L90(9k) > 47,100 hrs
L80(9k) > 47,100 hrs
L70(9k) > 47,100 hrs
B3050-1
105 °C
105 °C
1500 mA
3000 K
10
10,080 hrs
L90(10k) > 55,400 hrs
L80(10k) > 55,400 hrs
L70(10k) > 55,400 hrs
B3050-2
85 °C
85 °C
2500 mA
3000 K
10
10,080 hrs
L90(10k) > 55,400 hrs
L80(10k) > 55,400 hrs
L70(10k) > 55,400 hrs
Scaling For Applicable Products
The data sets cited below meet all the criteria for one LM-80 data set to apply to a range of LED arrays, as defined in the ENERGY STAR
September 9, 2011 guidelines, Section 3.7.d. The table below defines the current values that apply to each product when scaled from the
tested LM-80 product. The tested product is listed in bold text below.
Applicable Currents
Product Name
Voltage
Class
Product Order Code
Data Set
2530-1
(105 °C)
CXB1830
36 V
CXB1830-xxxx-xxxNxxxxxxx
707 mA
CXB1830
36 V
CXB1830-xxxx-xxxNxxxxxxx
CXB2530
36 V
CXB2530-xxxx-xxxNxxxxxxx
CXB3050
36 V
CXB3050-xxxx-xxxNxxxxxxx
Data Set
B3050-1
(105 °C)
Data Set
B3050-2
(85 °C)
653 mA
1094 mA
1500 mA
2500 mA
1200 mA
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
31
LED Components IES LM-80 Testing results
XLamp® CXB2530 White LEDs (Rev 2)
Revision:
2 (May 5, 2016)
Description Of LED Light Sources
XLamp CXB2530 White LEDs (Series: CXB2530)
This LM-80 report is applicable to the following order codes:
CXB2530-xxxx-xxxxxxxxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
B2530-1
105 °C
105 °C
1200 mA
3000 K
10
8,568 hrs
L90(9k) > 47,100 hrs
L80(9k) > 47,100 hrs
L70(9k) > 47,100 hrs
B2530-2
85 °C
85 °C
1600 mA
3000 K
10
8,568 hrs
L90(9k) > 47,100 hrs
L80(9k) > 47,100 hrs
L70(9k) > 47,100 hrs
Results Summary For Tested LED Array
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
B3050-1
105 °C
105 °C
1500 mA
3000 K
10
10,080 hrs
L90(10k) > 55,400 hrs
L80(10k) > 55,400 hrs
L70(10k) > 55,400 hrs
B3050-2
85 °C
85 °C
2500 mA
3000 K
10
10,080 hrs
L90(10k) > 55,400 hrs
L80(10k) > 55,400 hrs
L70(10k) > 55,400 hrs
Scaling For Applicable Products
The data sets cited below meet all the criteria for one LM-80 data set to apply to a range of LED arrays, as defined in the ENERGY STAR
September 9, 2011 guidelines, Section 3.7.d. The table below defines the current values that apply to each product when scaled from the
tested LM-80 product. The tested product is listed in bold text below.
Applicable Currents
Product Name
Voltage
Class
Product Order Code
Data Set
B3050-1
(105 °C)
Data Set
B3050-2
(85 °C)
CXB2530
36 V
CXB2530-xxxx-xxxNxxxxxxx
808 mA
1346 mA
CXB3050
36 V
CXB3050-xxxx-xxxNxxxxxxx
1500 mA
2500 mA
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
32
LED Components IES LM-80 Testing results
XLamp® CXB2540 White LEDs (Rev 2)
Revision:
2 (May 5, 2016)
Description Of LED Light Sources
XLamp CXB2540 White LEDs (Series: CXB2540)
This LM-80 report is applicable to the following order codes:
CXB2540-xxxx-xxxxxxxxxxx
No failures occurred during testing.
Results Summary For Tested LED Array
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
B3050-1
105 °C
105 °C
1500 mA
3000 K
10
10,080 hrs
L90(10k) > 55,400 hrs
L80(10k) > 55,400 hrs
L70(10k) > 55,400 hrs
B3050-2
85 °C
85 °C
2500 mA
3000 K
10
10,080 hrs
L90(10k) > 55,400 hrs
L80(10k) > 55,400 hrs
L70(10k) > 55,400 hrs
Scaling For Applicable Products
The data sets cited below meet all the criteria for one LM-80 data set to apply to a range of LED arrays, as defined in the ENERGY STAR
September 9, 2011 guidelines, Section 3.7.d. The table below defines the current values that apply to each product when scaled from the
tested LM-80 product. The tested product is listed in bold text below.
Applicable Currents
Product Name
Voltage
Class
Product Order Code
Data Set
B3050-1
(105 °C)
Data Set
B3050-2
(85 °C)
CXB2540
36 V
CXB2540-xxxx-xxxNxxxxxxx
1146 mA
1923 mA
CXB3050
36 V
CXB3050-xxxx-xxxNxxxxxxx
1500 mA
2500 mA
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
33
LED Components IES LM-80 Testing results
XLamp® CXB3050 White LEDs (Rev 2)
Revision:
2 (May 5, 2016)
Description Of LED Light Sources
XLamp CXB3050 White LEDs (Series: CXB3050)
This LM-80 report is applicable to the following order codes:
CXB3050-xxxx-xxxxxxxxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
B3050-1
105 °C
105 °C
1500 mA
3000 K
10
10,080 hrs
L90(10k) > 55,400 hrs
L80(10k) > 55,400 hrs
L70(10k) > 55,400 hrs
B3050-2
85 °C
85 °C
2500 mA
3000 K
10
10,080 hrs
L90(10k) > 55,400 hrs
L80(10k) > 55,400 hrs
L70(10k) > 55,400 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
34
LED Components IES LM-80 Testing results
XLamp® CXB3070 White LEDs (Rev 2)
Revision:
2 (May 5, 2016)
Description Of LED Light Sources
XLamp CXB3070 White LEDs (Series: CXB3070)
This LM-80 report is applicable to the following order codes:
CXB3070-xxxx-xxxxxxxxxxx
No failures occurred during testing.
Results Summary For Tested LED Array
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
B3590-1
105 °C
105 °C
1050 mA
3000 K
25
6,048 hrs
L90(6k) > 36,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
B3590-2
85 °C
85 °C
1400 mA
3000 K
25
6,046 hrs
L90(6k) > 36,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
Scaling For Applicable Products
The data sets cited below meet all the criteria for one LM-80 data set to apply to a range of LED arrays, as defined in the ENERGY STAR
September 9, 2011 guidelines, Section 3.7.d. The table below defines the current values that apply to each product when scaled from the
tested LM-80 product. The tested product is listed in bold text below.
Applicable Currents
Product Name
Voltage
Class
Product Order Code
Data Set
B3590-1
(105 °C)
Data Set
B3590-2
(85 °C)
CXB3070
36 V
CXB3070-xxxx-xxxNxxxxxxx
1321 mA
1764 mA
CXB3590
72 V
CX3590-xxxx-xxxRxxxxxxx
1050 mA
1400 mA
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
35
LED Components IES LM-80 Testing results
XLamp® CXB3590 White LEDs (Rev 2)
Revision:
2 (May 5, 2016)
Description Of LED Light Sources
XLamp CXB3590 White LEDs (Series: CXB3590)
This LM-80 report is applicable to the following order codes:
CXB3590 36 V
CXB3590-xxxx-xxxNxxxxxxx
CXB3590 72 V
CXB3590-xxxx-xxxRxxxxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
B3590-1
105 °C
105 °C
2100 mA (36 V)
1050 mA (72 V)
3000 K
10
6,552 hrs
L90(7k) > 36,000 hrs
L80(7k) > 36,000 hrs
L70(7k) > 36,000 hrs
B3590-2
85 °C
85 °C
2800 mA (36 V)
1400 mA (72 V)
3000 K
10
8,064 hrs
L90(8k) > 44,400 hrs
L80(8k) > 44,400 hrs
L70(8k) > 44,400 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
36
LED Components IES LM-80 Testing results
XLamp® MC-E White LEDs (Rev 1)
Revision:
1 (December 8, 2010)
Description Of LED Light Sources
XLamp MC-E White LEDs (Series: MCE4WT)
XLamp MC-E EasyWhite® LEDs (Series: MCEEZW)
This LM-80 report is applicable to the following order codes:
MC-E White:
MCE4WT-A2-xxxx-xxxxxx
MC-E EasyWhite: MCEEZW-A1-xxxx-xxxxxxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
1
45 °C
45 °C
350 mA
3000 K
26
6,048 hrs
L90(6k) > 25,700 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
3
55 °C
55 °C
350 mA
3000 K
26
6,048 hrs
L90(6k) = 28,800 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
5
85 °C
85 °C
350 mA
3000 K
26
6,048 hrs
L90(6k) = 23,100 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
2
45 °C
45 °C
700 mA
3000 K
26
6,048 hrs
L90(6k) = 23,600 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
4
55 °C
55 °C
700 mA
3000 K
26
6,048 hrs
L90(6k) = 11,700 hrs
L80(6k) = 21,900 hrs
L70(6k) = 33.400 hrs
6
85 °C
85 °C
700 mA
3000 K
26
6,048 hrs
L90(6k) = 7,660 hrs
L80(6k) = 13,900 hrs
L70(6k) = 20,900 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
37
LED Components IES LM-80 Testing results
XLamp® MHB-A White LEDs (Rev 4)
Revision:
4 (March 1, 2016)
Description Of LED Light Sources
XLamp MHB-A White LEDs (Series: MHBAWT)
This LM-80 report is applicable to the following order codes:
MHB-A 9 V:
MHBAWT-xxxx-xxxCxxxxxxx
MHB-A 18 V:
MHBAWT-xxxx-xxxFxxxxxxx
MHB-A 36 V:
MHBAWT-xxxx-xxxNxxxxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
MHBA-2
105 °C
105 °C
320 mA (9 V)
160 mA (18 V)
80 mA (36 V)
3000 K
25
8,568 hrs
L90(9k) > 51,400 hrs
L80(9k) > 51,400 hrs
L70(9k) > 51,400 hrs
MHBA-1
105 °C
105 °C
500 mA (9 V)
250 mA (18 V)
125 mA (36 V)
3000 K
23
8,568 hrs
L90(9k) = 30,200 hrs
L80(9k) > 51,400 hrs
L70(9k) > 51,400 hrs
MHBA-3
85 °C
85 °C
500 mA (9 V)
250 mA (18 V)
125 mA (36 V)
3000 K
24
8,568 hrs
L90(9k) = 29,500 hrs
L80(9k) > 51,400 hrs
L70(9k) > 51,400 hrs
MHBA-4
85 °C
85 °C
700 mA (9 V)
350 mA (18 V)
175 mA (36 V)
3000 K
20
8,568 hrs
L90(9k) = 21,400 hrs
L80(9k) > 51,400 hrs
L70(9k) > 51,400 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
38
LED Components IES LM-80 Testing results
XLamp® MHD-E White LEDs (Rev 4)
Revision:
4 (March 1, 2016)
Description Of LED Light Sources
XLamp MHD-E White LEDs (Series: MHDEWT)
This LM-80 report is applicable to the following order codes:
MHD-E 9 V:
MHDEWT-xxxx-xxxCxxxxxxx
MHD-E 18 V:
MHDEWT-xxxx-xxxFxxxxxxx
MHD-E 36 V:
MHDEWT-xxxx-xxxNxxxxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
MHDE-1
105 °C
105 °C
600 mA (9 V)
300 mA (18 V)
150 mA (36 V)
3000 K
20
8,568 hrs
L90(8.5k) > 51,400 hrs
L80(8.5k) > 51,400 hrs
L70(8.5k) > 51,400 hrs
MHDE-2
85 °C
85 °C
1000 mA (9 V)
500 mA (18 V)
250 mA (36 V)
3000 K
20
9,072 hrs
L90(9k) > 54,400 hrs
L80(9k) > 54,400 hrs
L70(9k) > 54,400 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
39
LED Components IES LM-80 Testing results
XLamp® MHD-G White LEDs (Rev 4)
Revision:
4 (March 1, 2016)
Description Of LED Light Sources
XLamp MHD-G White LEDs (Series: MHDGWT)
This LM-80 report is applicable to the following order codes:
MHD-G 18 V:
MHDGWT-xxxx-xxxFxxxxxxx
MHD-G 36 V:
MHDGWT-xxxx-xxxNxxxxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
MHDG-1
105 °C
105 °C
400 mA (18 V)
200 mA (36 V)
3000 K
20
8,064 hrs
L90(8k) > 48,400 hrs
L80(8k) > 48,400 hrs
L70(8k) > 48,400 hrs
MHDG-2
105 °C
105 °C
700 mA (18 V)
350 mA (36 V)
3000 K
20
6,048 hrs
L90(6k) = 11,500 hrs
L80(6k) = 28,400 hrs
L70(6k) > 36,300 hrs
MHDG-3
85 °C
85 °C
800 mA (18 V)
400 mA (36 V)
3000 K
20
8,568 hrs
L90(8.5k) = 24,600 hrs
L80(8.5k) = 51,400 hrs
L70(8.5k) > 51,400 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
40
LED Components IES LM-80 Testing results
XLamp® MK-R White LEDs (Rev 2)
Revision:
2 (May 12, 2015)
Description Of LED Light Sources
XLamp MK-R White LEDs (Series: MKRAWT)
This LM-80 report is applicable to the following order codes:
MK-R 6 V:
MKRAWT-xx-xxxx-xBxxxxxxxxx
MK-R 12 V:
MKRAWT-xx-xxxx-xDxxxxxxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
3
125 °C
125 °C
700 mA (6 V)
350 mA (12 V)
3000 K
25
11,088 hrs
L90(11k) > 66,500 hrs
L80(11k) > 66,500 hrs
L70(11k) > 66,500 hrs
8
105 °C
105 °C
1000 mA (6 V)
500 mA (12 V)
3000 K
25
13,104 hrs
L90(13k) = 34,800 hrs
L80(13k) = 75,600 hrs
L70(13k) > 78,600 hrs
9
85 °C
85 °C
1400 mA (6 V)
700 mA (12 V)
3000 K
25
13,104 hrs
L90(13k) = 36,400 hrs
L80(13k) > 78,600 hrs
L70(13k) > 78,600 hrs
4
105 °C
105 °C
1400 mA (6 V)
700 mA (12 V)
3000 K
25
10,080 hrs
L90(10k) = 26,900 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
5
85 °C
85 °C
2000 mA (6 V)
1000 mA (12 V)
3000 K
25
11,088 hrs
L90(11k) = 30,500 hrs
L80(11k) = 62,200 hrs
L70(11k) > 66,500 hrs
6
55 °C
55 °C
2500 mA (6 V)
1250 mA (12 V)
3000 K
25
6,048 hrs
L90(6k) > 36,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
7
85 °C
85 °C
2500 mA (6 V)
1250 mA (12 V)
3000 K
25
6,048 hrs
L90(6k) = 33,900 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
The following data sets are extended versions of some of the data sets above, but have sample sizes less than 25 units each. Please refer
to each individual data set for the exact number of samples included. These data sets are projected according to IES TM-21-11 standards
and the Reported L70 lifetimes presented are valid under TM-21-11. However, the use of these extended data sets may not be allowed by
a particular program because of the sample size of the data set. Cree recommends reviewing the details on LM-80 lumen maintenance for
each program to verify that data sets with fewer than 25 samples are considered valid. If not, the data sets above should be referenced.
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
41
LED Components IES LM-80 Testing results
XLamp® MK-R White LEDs (Rev 5) - Continued
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
6+
55 °C
55 °C
2500 mA (6 V)
1250 mA (12 V)
3000 K
21
7,056 hrs
L90(7k) > 42,300 hrs
L80(7k) > 42,300 hrs
L70(7k) > 42,300 hrs
7+
85 °C
85 °C
2500 mA (6 V)
1250 mA (12 V)
3000 K
22
8,064 hrs
L90(8k) = 19,800 hrs
L80(8k) = 42,600 hrs
L70(8k) > 48,400 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
42
LED Components IES LM-80 Testing results
XLamp® ML-B White LEDs (Rev 1)
Revision:
1 (May 1, 2012)
Description Of LED Light Sources
XLamp ML-B White LEDs (Series: MLBAWT)
This LM-80 report is applicable to the following order codes:
MLBAWT-xx-xxxx-xxxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
1
45 °C
45 °C
80 mA
2700 K
25
6,048 hrs
L90(6k) > 36,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
2
55 °C
55 °C
80 mA
2700 K
25
6,048 hrs
L90(6k) > 36,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
3
85 °C
85 °C
80 mA
2700 K
25
6,048 hrs
L90(6k) > 36,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
4
85 °C
85 °C
175 mA
2700 K
25
8,064 hrs
L90(8k) = 12,300 hrs
L80(8k) = 23,600 hrs
L70(8k) = 36,300 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
43
LED Components IES LM-80 Testing results
XLamp® ML-C & ML-E White LEDs (Rev 1)
Revision:
1 (March 19, 2012)
Description Of LED Light Sources
XLamp ML-C White LEDs (Parallel (MLCAWT) & Series (MLCSWT) Configurations)
XLamp ML-E White LEDs (Parallel (MLEAWT) & Series (MLESWT) Configurations)
This LM-80 report is applicable to the following order codes:
ML-C Parallel:
MLCAWT-xx-xxxx-xxxxxx
ML-C Series:
MLCSWT-xx-xxxx-xxxxxx
ML-E Parallel:
MLEAWT-xx-xxxx-xxxxxx
ML-E Series :
MLESWT-xx-xxxx-xxxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
1
45 °C
45 °C
116 mA (MLCAWT)
58 mA (MLCSWT)
175 mA (MLEAWT)
58 mA (MLESWT)
2700 K
26
6,048 hrs
L90(6k) > 36,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
2
55 °C
55 °C
116 mA (MLCAWT)
58 mA (MLCSWT)
175 mA (MLEAWT)
58 mA (MLESWT)
2700 K
26
6,048 hrs
L90(6k) = 25,600 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
85 °C
116 mA (MLCAWT)
58 mA (MLCSWT)
175 mA (MLEAWT)
58 mA (MLESWT)
2700 K
26
6,048 hrs
L90(6k) = 13,600 hrs
L80(6k) = 27,200 hrs
L70(6k) > 36,300 hrs
3
85 °C
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
44
LED Components IES LM-80 Testing results
XLamp® ML-E White LEDs (Rev 1)
Revision:
1 (June 14, 2013)
Description Of LED Light Sources
XLamp ML-E White LEDs (Series: MLEAWT)
This LM-80 report is applicable to the following order codes:
MLEAWT-xx-xxxx-xxxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
P2
55 °C
55 °C
175 mA
3000 K
25
6,048 hrs
L90(6k) > 36,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
P3
85 °C
85 °C
175 mA
3000 K
25
6,552 hrs
L90(7k) = 24,700 hrs
L80(7k) > 39,300 hrs
L70(7k) > 39,300 hrs
P1
105 °C
105 °C
175 mA
3000 K
25
6,048 hrs
L90(6k) = 10,200 hrs
L80(6k) = 18,700 hrs
L70(6k) = 28,300 hrs
P4
55 °C
55 °C
350 mA
3000 K
25
6,048 hrs
L90(6k) = 23,000 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
P5
85 °C
85 °C
350 mA
3000 K
25
6,048 hrs
L90(6k) = 9,450 hrs
L80(6k) = 18,600 hrs
L70(6k) = 28,900 hrs
The following data sets are extended versions of some of the data sets above, but have sample sizes less than 25 units each. Please refer
to each individual data set for the exact number of samples included. These data sets are projected according to IES TM-21-11 standards
and the Reported L70 lifetimes presented are valid under TM-21-11. However, the use of these extended data sets may not be allowed by
a particular program because of the sample size of the data set. Cree recommends reviewing the details on LM-80 lumen maintenance for
each program to verify that data sets with fewer than 25 samples are considered valid. If not, the data sets above should be referenced.
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
P3+
85 °C
85 °C
175 mA
3000 K
20
10,584 hrs
L90(11k) = 17,100 hrs
L80(11k) = 29,900 hrs
L70(11k) = 44,300 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
45
LED Components IES LM-80 Testing results
XLamp® MP-L EasyWhite® LEDs (Rev 0)
Revision:
0 (September 30, 2010)
Description Of LED Light Sources
XLamp MP-L EasyWhite LEDs (Series: MPLEZW)
This LM-80 report is applicable to the following order codes:
MPLEZW-A1-xxxx-xxxxxxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
1
45 °C
45 °C
250 mA
3000 K
26
6,048 hrs
L90(6k) = 28,700 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
2
55 °C
55 °C
250 mA
3000 K
26
6,048 hrs
L90(6k) = 18,200 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
3
85 °C
85 °C
250 mA
3000 K
26
6,048 hrs
L90(6k) = 29,100 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
46
LED Components IES LM-80 Testing results
XLamp® MT-G EasyWhite® LEDs (Rev 1)
Revision:
1 (February 16, 2012)
Description Of LED Light Sources
XLamp MT-G EasyWhite LEDs (Series: MTGEZW)
This LM-80 report is applicable to the following order codes:
MT-G 6 V:
MTGEZW-xx-xxxx-xBxxxxxxx
MT-G 36 V:
MTGEZW-xx-xxxx-xNxxxxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
1
55 °C
55 °C
2000 mA (6 V)
333 mA (36 V)
2700 K
25
6,048 hrs
L90(6k) = 25,500 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
2
85 °C
85 °C
2000 mA (6 V)
333 mA (36 V)
2700 K
25
6,048 hrs
L90(6k) = 15,900 hrs
L80(6k) = 35,000 hrs
L70(6k) > 36,300 hrs
3
105 °C
105 °C
2000 mA (6 V)
333 mA (36 V)
2700 K
25
6,048 hrs
L90(6k) = 14,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
4
55 °C
55 °C
3000 mA (6 V)
500 mA (36 V)
3000 K
25
6,048 hrs
L90(6k) = 23,500 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
5
85 °C
85 °C
3000 mA (6 V)
500 mA (36 V)
3000 K
25
6,048 hrs
L90(6k) = 13,200 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
6
105 °C
105 °C
3000 mA (6 V)
500 mA (36 V)
3000 K
25
6,048 hrs
L90(6k) = 11,800 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
7
105 °C
105 °C
4200 mA (6 V)
700 mA (36 V)
3000 K
25
6,048 hrs
L90(6k) = 14,000 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
47
LED Components IES LM-80 Testing results
XLamp® MT-G2 EasyWhite® LEDs (Rev 3)
Revision:
3 (June 15, 2014)
Description Of LED Light Sources
XLamp MT-G2 EasyWhite LEDs (Series: MTGBEZ)
This LM-80 report is applicable to the following order codes:
MT-G2 6 V:
MTGBEZ-xx-xxxx-xBxxxxxxx
MT-G2 9V:
MTGBEZ-xx-xxxx-xCxxxxxxx
MT-G2 36 V:
MTGBZW-xx-xxxx-xNxxxxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
1
85 °C
85 °C
3000 mA (6 V)
2000 mA (9 V)
500 mA (36 V)
3000 K
25
6,048 hrs
L90(6k) = 12,000 hrs
L80(6k) = 26,600 hrs
L70(6k) > 36,300 hrs
2
105 °C
105 °C
3000 mA (6 V)
2000 mA (9 V)
500 mA (36 V)
3000 K
26
6,048 hrs
L90(6k) = 6,060 hrs
L80(6k) = 15,400 hrs
L70(6k) = 26,000 hrs
The following data sets are extended versions of some of the data sets above, but have sample sizes less than 25 units each. Please refer
to each individual data set for the exact number of samples included. These data sets are projected according to IES TM-21-11 standards
and the Reported L70 lifetimes presented are valid under TM-21-11. However, the use of these extended data sets may not be allowed by
a particular program because of the sample size of the data set. Cree recommends reviewing the details on LM-80 lumen maintenance for
each program to verify that data sets with fewer than 25 samples are considered valid. If not, the data sets above should be referenced.
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
1+
85 °C
85 °C
3000 mA (6 V)
2000 mA (9 V)
500 mA (36 V)
3000 K
15
13,104 hrs
L90(13k) = 22,300 hrs
L80(13k) = 59,200 hrs
L70(13k) > 78,600 hrs
2+
105 °C
105 °C
3000 mA (6 V)
2000 mA (9 V)
500 mA (36 V)
3000 K
20
7,056 hrs
L70(7k) = 27,700 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
48
LED Components IES LM-80 Testing results
XLamp® MX-3 White LEDs (Rev 0)
Revision:
0 (March 29, 2011)
Description Of LED Light Sources
XLamp MX-3 White LEDs (Parallel (MX3AWT) & Series (MX3SWT) Configurations)
This LM-80 report is applicable to the following order codes:
MX-3 Parallel:
MX3AWT-xx-xxxx-xxxxxx
MX-3 Series:
MX3SWT-xx-xxxx-xxxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
1
45 °C
45 °C
400 mA (MX3AWT)
133 mA (MX3SWT)
2700 K
25
6,048 hrs
L90(6k) > 36,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
2
55 °C
55 °C
400 mA (MX3AWT)
133 mA (MX3SWT)
2700 K
25
6,048 hrs
L90(6k) = 21,700 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
3
85 °C
85 °C
400 mA (MX3AWT)
133 mA (MX3SWT)
2700 K
25
6,048 hrs
L90(6k) = 16,600 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
49
LED Components IES LM-80 Testing results
XLamp® MX-6 White LEDs (Rev 2)
Revision:
2 (September 2, 2011)
Description Of LED Light Sources
XLamp MX-6 White LEDs (Parallel (MX6AWT) & Series (MX6SWT) Configurations)
This LM-80 report is applicable to the following order codes:
MX-6 Parallel:
MX6AWT-xx-xxxx-xxxxxx
MX-6 Series:
MX6SWT-xx-xxxx-xxxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
1
45 °C
45 °C
350 mA (MX6AWT)
58 mA (MX6SWT)
2700 K
26
6,048 hrs
L90(6k) = 15,700 hrs
L80(6k) = 29,400 hrs
L70(6k) > 36,300 hrs
2
55 °C
55 °C
350 mA (MX6AWT)
58 mA (MX6SWT)
2700 K
28
6,048 hrs
L90(6k) = 27,900 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
3
85 °C
85 °C
350 mA (MX6AWT)
58 mA (MX6SWT)
3000 K
30
6,048 hrs
L90(6k) = 12,100 hrs
L80(6k) = 23,100 hrs
L70(6k) = 35,600 hrs
4
45 °C
45 °C
600 mA (MX6AWT)
100 mA (MX6SWT)
2700 K
25
6,048 hrs
L90(6k) = 28,400 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
5
55 °C
55 °C
600 mA (MX6AWT)
100 mA (MX6SWT)
2700 K
25
6,048 hrs
L90(6k) = 19,500 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
6
85 °C
85 °C
600 mA (MX6AWT)
100 mA (MX6SWT)
2700 K
25
6,048 hrs
L90(6k) = 11,100 hrs
L80(6k) = 22,000 hrs
L70(6k) = 34,400 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
50
LED Components IES LM-80 Testing results
XLamp® XB-D White LEDs (Rev 2)
Revision:
2 (October 10, 2013)
Description Of LED Light Sources
XLamp XB-D White LEDs (Series: XBDAWT)
This LM-80 report is applicable to the following order codes:
XBDAWT-xx-xxxx-xxxxxxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
7
85 °C
85 °C
500 mA
3000 K
25
10,080 hrs
L95(10k) = 29,400 hrs
L90(10k) > 60,500 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
3
105 °C
105 °C
700 mA
3000 K
25
10,080 hrs
L90(10k) = 56,000 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
4
55 °C
55 °C
1000 mA
3000 K
25
10,080 hrs
L90(10k) = 45,000 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
5
85 °C
85 °C
1000 mA
3000 K
24
10,080 hrs
L90(10k) = 33,400 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
6
105 °C
105 °C
1000 mA
3000 K
25
6,048 hrs
L90(6k) = 12,800 hrs
L80(6k) = 29,100 hrs
L70(6k) > 36,300 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
51
LED Components IES LM-80 Testing results
XLamp® XB-E High Voltage White LEDs (Rev 0)
Revision:
0 (October 11, 2013)
Description Of LED Light Sources
XLamp XB-E White LEDs (Series: XBEHVW)
This LM-80 report is applicable to the following order codes:
XBEHVW-xx-xxxx-xxxxxxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
1
105 °C
105 °C
44 mA
2700 K
25
6,048 hrs
L90(6k) = 10,400 hrs
L80(6k) = 23,100 hrs
L70(6k) > 36,300 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
52
LED Components IES LM-80 Testing results
XLamp® XB-G High Voltage White LEDs (Rev 1)
Revision:
1 (March 4, 2014)
Description Of LED Light Sources
XLamp XB-G White LEDs (Series: XBGHVW)
This LM-80 report is applicable to the following order codes:
XBGHVW-xx-xxxx-xxxxxxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
1
105 °C
105 °C
44 mA
2700 K
25
6,048 hrs
L90(6k) = 17,800 hrs
L80(6k) = 36,300 hrs
L70(6k) > 36,300 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
53
LED Components IES LM-80 Testing results
XLamp® XB-H White LEDs (Rev 1)
Revision:
1 (January 5, 2015)
Description Of LED Light Sources
XLamp XB-H White LEDs (Series: XBHAWT)
This LM-80 report is applicable to the following order codes:
XBHAWT-xx-xxxx-xxxxxxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
1
105 °C
105 °C
700 mA
3000 K
25
6,048 hrs
L90(6k) > 36,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
4
85 °C
85 °C
1000 mA
3000 K
25
6,048 hrs
L90(6k) = 35,900 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
2
105 °C
105 °C
1000 mA
3000 K
25
6,048 hrs
L90(6k) = 35,100 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
3
85 °C
85 °C
1500 mA
3000 K
25
6,048 hrs
L90(6k) = 28,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
54
LED Components IES LM-80 Testing results
XLamp® XH-B White LEDs (Rev 2)
Revision:
2 (March 6, 2015)
Description Of LED Light Sources
XLamp XH-B White LEDs (Series: XHBAWT)
This LM-80 report is applicable to the following order codes:
XHBAWT-xx-xxxx-xxxxxxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
1
85 °C
85 °C
80 mA
3000 K
25
14,112 hrs
L90(14k) = 70,100 hrs
L80(14k) > 84,700 hrs
L70(14k) > 84,700 hrs
2
105 °C
105 °C
80 mA
3000 K
25
6,552 hrs
L90(7k) > 39,300 hrs
L80(7k) > 39,300 hrs
L70(7k) > 39,300 hrs
4
85 °C
85 °C
125 mA
3000 K
25
14,112 hrs
L90(14k) = 53,100 hrs
L80(14k) > 84,700 hrs
L70(14k) > 84,700 hrs
The following data sets are extended versions of some of the data sets above, but have sample sizes less than 25 units each. Please refer
to each individual data set for the exact number of samples included. These data sets are projected according to IES TM-21-11 standards
and the Reported L70 lifetimes presented are valid under TM-21-11. However, the use of these extended data sets may not be allowed by
a particular program because of the sample size of the data set. Cree recommends reviewing the details on LM-80 lumen maintenance for
each program to verify that data sets with fewer than 25 samples are considered valid. If not, the data sets above should be referenced.
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
2+
105 °C
105 °C
80 mA
3000 K
24
14,112 hrs
L90(14k) = 45,100 hrs
L80(14k) > 84,700 hrs
L70(14k) > 84,700 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
55
LED Components IES LM-80 Testing results
XLamp® XH-G White LEDs (Rev 3)
Revision:
3 (May 13, 2015)
Description Of LED Light Sources
XLamp XH-G White LEDs (Series: XHGAWT)
This LM-80 report is applicable to the following order codes:
XHGAWT-xx-xxxx-xxxxxxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
1
85 °C
85 °C
80 mA
3000 K
25
14,616 hrs
L90(15k) = 77,500 hrs
L80(15k) > 87,700 hrs
L70(15k) > 87,700 hrs
2
105 °C
105 °C
80 mA
3000 K
15
14,112 hrs
L90(14k) > 77,600 hrs
L80(14k) > 77,600 hrs
L70(14k) > 77,600 hrs
3
85 °C
85 °C
175 mA
3000 K
25
14,112 hrs
L90(14k) = 56,600 hrs
L80(14k) > 84,700 hrs
L70(14k) > 84,700 hrs
4
105 °C
105 °C
175 mA
3000 K
25
14,112 hrs
L90(14k) = 30,500 hrs
L80(14k) = 66,000 hrs
L70(14k) > 84,700 hrs
5
85 °C
85 °C
350 mA
3000 K
25
6,552 hrs
L90(7k) = 24,300 hrs
L80(7k) > 39,300 hrs
L70(7k) > 39,300 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
56
LED Components IES LM-80 Testing results
XLamp® XHP35 White LEDs (Rev 0)
Revision:
0 (January 25, 2016)
Description Of LED Light Sources
XLamp XHP35 White LEDs (Series: XHP35A)
This LM-80 report is applicable to the following order codes:
XHP35A-xx-xxxx-xxxxxxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
1
85 °C
85 °C
700 mA
3000 K
24
6,048 hrs
L90(6k) > 36,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
2
105 °C
105 °C
700 mA
3000 K
24
6,048 hrs
L90(6k) = 31,700 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
3
85 °C
85 °C
1050 mA
3000 K
21
6,048 hrs
L90(6k) = 28,400 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
57
LED Components IES LM-80 Testing results
XLamp® XHP50 White LEDs (Rev 2)
Revision:
2 (January 28, 2016)
Description Of LED Light Sources
XLamp XHP50 White LEDs (Series: XHP50A)
This LM-80 report is applicable to the following order codes:
XHP50A-xx-xxxx-xxxxxxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
3
85 °C
85 °C
1400 mA (6 V)
700 mA (12 V)
3000 K
24
6,048 hrs
L90(6k) > 36,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
4
105 °C
105 °C
1400 mA (6 V)
700 mA (12 V)
3000 K
25
6,048 hrs
L90(6k) > 36,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
5
125 °C
125 °C
1400 mA (6 V)
700 mA (12 V)
3000 K
20
6,048 hrs
L90(6k) = 19,700 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
6
85 °C
85 °C
2100 mA (6 V)
1050 mA (12 V)
3000 K
25
6,048 hrs
L90(6k) > 36,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
7
105 °C
105 °C
2100 mA (6 V)
1050 mA (12 V)
3000 K
25
6,048 hrs
L90(6k) = 18,600 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
8
85 °C
85 °C
3000 mA (6 V)
1500 mA (12 V)
3000 K
25
6,048 hrs
L90(6k) = 29,900 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
58
LED Components IES LM-80 Testing results
XLamp® XHP70 White LEDs (Rev 3)
Revision:
3 (June 10, 2016)
Description Of LED Light Sources
XLamp XHP70 White LEDs (Series: XHP70A)
This LM-80 report is applicable to the following order codes:
XHP70A-xx-xxxx-xxxxxxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
4
85 °C
85 °C
2100 mA (6 V)
1050 mA (12 V)
3000 K
25
9,072 hrs
L90(9k) > 54,400 hrs
L80(9k) > 54,400 hrs
L70(9k) > 54,400 hrs
1
105 °C
105 °C
2100 mA (6 V)
1050 mA (12 V)
3000 K
20
6,048 hrs
L90(6k) > 36,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
2
125 °C
125 °C
2100 mA (6 V)
1050 mA (12 V)
3000 K
20
6,048 hrs
L90(6k) > 36,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
5
85 °C
85 °C
3000 mA (6 V)
1500 mA (12 V)
3000 K
25
9,072 hrs
L90(9k) > 54,400 hrs
L80(9k) > 54,400 hrs
L70(9k) > 54,400 hrs
3
105 °C
105 °C
3000 mA (6 V)
1500 mA (12 V)
3000 K
20
9,072 hrs
L90(9k) > 54,400 hrs
L80(9k) > 54,400 hrs
L70(9k) > 54,400 hrs
6
85 °C
85 °C
4200 mA (6 V)
2100 mA (12 V)
3000 K
25
9,072 hrs
L90(9k) > 54,400 hrs
L80(9k) > 54,400 hrs
L70(9k) > 54,400 hrs
7
85 °C
85 °C
4200 mA (6 V)
2100 mA (12 V)
3000 K
25
6,552 hrs
L90(7k) = 17,900 hrs
L80(7k) > 39,300 hrs
L70(7k) > 39,300 hrs
8
85 °C
85 °C
4800 mA (6 V)
2400 mA (12 V)
3000 K
25
9,576 hrs
L90(10k) > 57,500 hrs
L80(10k) > 57,500 hrs
L70(10k) > 57,500 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
59
LED Components IES LM-80 Testing results
XLamp® XM-L EasyWhite® LEDs (Rev 1)
Revision:
1 (August 8, 2013)
Description Of LED Light Sources
XLamp XM-L EasyWhite LEDs (Series: XMLEZW)
This LM-80 report is applicable to the following order codes:
XM-L EZW 6 V:
XMLEZW-xx-xxxx-xBxxxxxxx
XM-L EZW 12 V: XMLEZW-xx-xxxx-xDxxxxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
3
105 °C
105 °C
700 mA (6 V)
350 mA (12 V)
2700 K
25
15,120 hrs
L95(15k) = 28,700 hrs
L90(15k) > 90,700 hrs
L80(15k) > 90,700 hrs
L70(15k) > 90,700 hrs
105 °C
1000 mA (6 V)
500 mA (12 V)
7,056 hrs
L95(7k) = 42,200 hrs
L90(7k) > 42,300 hrs
L80(7k) > 42,300 hrs
L70(7k) > 42,300 hrs
85 °C
1500 mA (6 V)
750 mA (12 V)
6,048 hrs
L95(6k) = 19,400 hrs
L90(6k) > 36,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
6
7
105 °C
85 °C
3000 K
3000 K
25
25
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
60
LED Components IES LM-80 Testing results
XLamp® XM-L High Voltage White LEDs (Rev 0)
Revision:
0 (November 13, 2012)
Description Of LED Light Sources
XLamp XM-L High Voltage White LEDs (Series: XMLHVW)
This LM-80 report is applicable to the following order codes:
XMLHVW-xx-xxxx-xxxxxxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
1
55 °C
55 °C
88 mA
3000 K
25
6,048 hrs
L90(6k) = 15,000 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
2
85 °C
85 °C
88 mA
3000 K
25
6,048 hrs
L90(6k) = 8,180 hrs
L80(6k) = 22,100 hrs
L70(6k) > 36,300 hrs
3
105 °C
105 °C
88 mA
3000 K
25
6,048 hrs
L90(6k) = 7,450 hrs
L80(6k) = 19,500 hrs
L70(6k) = 33,200 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
61
LED Components IES LM-80 Testing results
XLamp® XM-L White LEDs (Rev 2)
Revision:
2 (October 31, 2012)
Description Of LED Light Sources
XLamp XM-L White LEDs (Series: XMLAWT)
This LM-80 report is applicable to the following order codes:
XMLAWT-xx-xxxx-xxxxxxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
4
55 °C
55 °C
1500 mA
2700 K
25
6,048 hrs
L90(6k) > 36,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
5
85 °C
85 °C
1500 mA
2700 K
25
6,048 hrs
L90(6k) > 36,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
6
105 °C
105 °C
1500 mA
2700 K
25
10,080 hrs
L90(10k) = 27,700 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
7
55 °C
55 °C
2000 mA
3000 K
25
6,048 hrs
L90(6k) > 36,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
8
85 °C
85 °C
2000 mA
3000 K
25
9,072 hrs
L90(9k) = 38,300 hrs
L80(9k) > 54,400 hrs
L70(9k) > 54,400 hrs
9
105 °C
105 °C
2000 mA
3000 K
25
6,048 hrs
L90(6k) = 21,600 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
10
85 °C
85 °C
3000 mA
3000 K
25
6,048 hrs
L90(6k) = 11,100 hrs
L80(6k) = 25,000 hrs
L70(6k) > 36,300 hrs
The following data sets are extended versions of some of the data sets above, but have sample sizes less than 25 units each. Please refer
to each individual data set for the exact number of samples included. These data sets are projected according to IES TM-21-11 standards
and the Reported L70 lifetimes presented are valid under TM-21-11. However, the use of these extended data sets may not be allowed by
a particular program because of the sample size of the data set. Cree recommends reviewing the details on LM-80 lumen maintenance for
each program to verify that data sets with fewer than 25 samples are considered valid. If not, the data sets above should be referenced.
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
62
LED Components IES LM-80 Testing results
XLamp® XM-L White LEDs (Rev 2) - Continued
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
5+
85 °C
85 °C
1500 mA
2700 K
23
12,096 hrs
L90(12k) = 29,600 hrs
L80(12k) > 72,600 hrs
L70(12k) > 72,600 hrs
6+
105 °C
105 °C
1500 mA
2700 K
23
12,096 hrs
L90(12k) = 25,900 hrs
L80(12k) = 59,800 hrs
L70(12k) > 72,600 hrs
7+
55 °C
55 °C
2000 mA
3000 K
11
11,088 hrs
L90(11k) > 61,000 hrs
L80(11k) > 61,000 hrs
L70(11k) > 61,000 hrs
8+
85 °C
85 °C
2000 mA
3000 K
21
12,096 hrs
L90(12k) = 24,800 hrs
L80(12k) = 52,600 hrs
L70(12k) > 72,600 hrs
9+
105 °C
105 °C
2000 mA
3000 K
14
8,568 hrs
L90(9k) = 15,900 hrs
L80(9k) = 33,700 hrs
L70(9k) > 47,100 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
63
LED Components IES LM-80 Testing results
XLamp® XM-L2 White LEDs (Rev 3B)
Revision:
3B (March 23, 2015)
Description Of LED Light Sources
XLamp XM-L2 White LEDs (Series: XMLBWT)
This LM-80 report is applicable to the following order codes:
XMLBWT-xx-xxxx-xxxxxxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
1
85 °C
85 °C
1500 mA
2700 K
25
7,560 hrs
L95(8k) > 45,400 hrs
L90(8k) > 45,400 hrs
L80(8k) > 45,400 hrs
L70(8k) > 45,400 hrs
2
105 °C
105 °C
1500 mA
2700 K
25
8,568 hrs
L95(9k) = 19,600 hrs
L90(9k) = 43,900 hrs
L80(9k) > 51,400 hrs
L70(9k) > 51,400 hrs
9,072 hrs
L95(9k) > 54,400 hrs
L90(9k) >54,400 hrs
L80(9k) > 54,400 hrs
L70(9k) > 54,400 hrs
8
55 °C
55 °C
2100 mA
2700 K
25
10
105 °C
105 °C
2100 mA
3000 K
25
6,048 hrs
L95(6k) = 14,900 hrs
L90(6k) > 36,600 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
9
55 °C
55 °C
3000 mA
2700 K
25
6,048 hrs
L95(6k) = 16,800 hrs
L90(6k) = 35,600 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
6,048 hrs
L95(6k) = 7,950 hrs
L90(6k) = 17,100 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
11
85 °C
85 °C
3000 mA
3000 K
25
The following data sets are extended versions of some of the data sets above, but have sample sizes less than 25 units each. Please refer
to each individual data set for the exact number of samples included. These data sets are projected according to IES TM-21-11 standards
and the Reported L70 lifetimes presented are valid under TM-21-11. However, the use of these extended data sets may not be allowed by
a particular program because of the sample size of the data set. Cree recommends reviewing the details on LM-80 lumen maintenance for
each program to verify that data sets with fewer than 25 samples are considered valid. If not, the data sets above should be referenced.
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
64
LED Components IES LM-80 Testing results
XLamp® XM-L2 White LEDs (Rev 3B) - Continued
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
1+
85 °C
85 °C
1500 mA
2700 K
23
12,096 hrs
L95(12k) = 30,100 hrs
L90(12k) = 60,900 hrs
L80(12k) > 72,600 hrs
L70(12k) > 72,600 hrs
8+
55 °C
55 °C
2100 mA
2700 K
17
12,096 hrs
L95(12k) > 66,500 hrs
L90(12k) > 66,500 hrs
L80(12k) > 66,500 hrs
L70(12k) > 66,500 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
65
LED Components IES LM-80 Testing results
XLamp® XP-E High Efficiency White LEDs (Rev 4)
Revision:
4 (April 25, 2012)
Description Of LED Light Sources
XLamp XP-E High Efficiency White LEDs (Series: XPEHEW)
This LM-80 report is applicable to the following order codes:
XPEHEW-xx-xxxx-xxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
11
85 °C
85 °C
350 mA
3000 K
25
10,080 hrs
L90(10k) = 32,800 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
12
105 °C
105 °C
350 mA
3000 K
25
6,048 hrs
L90(6k) = 15,600 hrs
L70(6k) = 34,100 hrs
L70(6k) > 36,300 hrs
8
55 °C
55 °C
500 mA
2700 K
25
8,064 hrs
L90(8k) > 48,400 hrs
L80(8k) > 48,400 hrs
L70(8k) > 48,400 hrs
9
85 °C
85 °C
500 mA
2700 K
25
8,064 hrs
L90(8k) = 28,400 hrs
L80(8k) > 48,400 hrs
L70(8k) > 48,400 hrs
10
85 °C
85 °C
700 mA
3000 K
25
9,072 hrs
L90(9k) = 21,900 hrs
L80(9k) = 44,100 hrs
L70(9k) > 54,400 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
66
LED Components IES LM-80 Testing results
XLamp® XP-E White LEDs (Rev 3)
Revision:
3 (November 9, 2011)
Description Of LED Light Sources
XLamp XP-E White LEDs (Series: XPEWHT)
This LM-80 report is applicable to the following order codes:
XPEWHT-xx-xxxx-xxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
8
55 °C
55 °C
350 mA
2700 K
25
10,080 hrs
L90(10k) = 56,800 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
9
85 °C
85 °C
350 mA
2700 K
25
10,080 hrs
L90(10k) = 39,700 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
10
105 °C
105 °C
350 mA
2700 K
25
6,048 hrs
L90(6k) = 19,400 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
5
45 °C
45 °C
700 mA
2700 K
25
10,080 hrs
L90(10k) > 60,500 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
6
55 °C
55 °C
700 mA
2700 K
25
10,080 hrs
L90(10k) > 60,500 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
7
85 °C
85 °C
700 mA
2700 K
25
10,080 hrs
L90(10k) = 28,300 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
67
LED Components IES LM-80 Testing results
XLamp® XP-E2 Red, Red-Orange, Amber, Phosphor‑Converted Amber, Green & Blue LEDs (Rev 2)
Revision:
2 (April 26, 2016)
Description Of LED Light Sources
XLamp XP-E2 Red LEDs (Series: XPEBRD)
XLamp XP-E2 Red-Orange LEDs (Series: XPEBRO)
XLamp XP-E2 Amber LEDs (Series: XPEBAM)
XLamp XP-E2 Phosphor‑Converted Amber LEDs (Series: XPEBPA)
XLamp XP-E2 Green LEDs (Series: XPEBGR)
XLamp XP-E2 Blue LEDs (Series: XPEBBL)
This LM-80 report is applicable to the following order codes:
XPEBRD-xx-xxxx-xxxxx
XPEBRO-xx-xxxx-xxxxx
XPEBAM-xx-xxxx-xxxxx
XPEBPA-xx-xxxx-xxxxx
XPEBGR-xx-xxxx-xxxxx
XPEBBL-xx-xxxx-xxxxx
No failures occurred during testing.
Test Summary
LED Color
Data Set
Case
Temp.
[TS]
Ambient
Temp. [TA]
Drive Current
[IF]
Sample
Count
Test Duration
Reported TM-21
Lifetimes
R3
85 °C
85 °C
1000 mA
20
17,136 hrs
L90(17k) = 68,900 hrs
L80(17k) > 103,000 hrs
L70(17k) > 103,000 hrs
R2
105 °C
105 °C
1000 mA
25
12,096 hrs
L90(12k) = 55,700 hrs
L80(12k) > 72,600 hrs
L70(12k) > 72,600 hrs
A1
85 °C
85 °C
1000 mA
14
6,048 hrs
L90(6k) > 33,300 hrs
L80(6k) > 33,300 hrs
L70(6k) > 33,300 hrs
A2
105 °C
105 °C
1000 mA
13
6,048 hrs
L90(6k) > 33,300 hrs
L80(6k) > 33,300 hrs
L70(6k) > 33,300 hrs
PCA1
85 °C
85 °C
1000 mA
20
11,592 hrs
L90(12k) = 13,200 hrs
L80(12k) = 30,900 hrs
L70(12k) = 51,000 hrs
PCA2
105 °C
105 °C
1000 mA
19
6,048 hrs
L90(6k) = 10,700 hrs
L80(6k) = 21,800 hrs
L70(6k) = 34,400 hrs
Red,
Red-Orange
Amber
PhosphorConverted
Amber
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
68
LED Components IES LM-80 Testing results
XLamp® XP-E2 Red, Red-Orange, Amber, Phosphor‑Converted Amber, Green & Blue LEDs (Rev 2) Continued
LED Color
Data Set
Case
Temp.
[TS]
Ambient
Temp. [TA]
Drive Current
[IF]
Sample
Count
Test Duration
Reported TM-21
Lifetimes
G2
105 °C
105 °C
500 mA
20
8,568 hrs
L90(9k) > 51,400 hrs
L80(9k) > 51,400 hrs
L70(9k) > 51,400 hrs
G3
85 °C
85 °C
1000 mA
20
8,568 hrs
L90(9k) > 51,400 hrs
L80(9k) > 51,400 hrs
L70(9k) > 51,400 hrs
B2
105 °C
105 °C
500 mA
20
7,560 hrs
L90(8k) > 45,400 hrs
L80(8k) > 45,400 hrs
L70(8k) > 45,400 hrs
B3
85 °C
85 °C
1000 mA
20
8,568 hrs
L90(9k) > 51,400 hrs
L80(9k) > 51,400 hrs
L70(9k) > 51,400 hrs
Green
Blue
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
69
LED Components IES LM-80 Testing results
XLamp® XP-E2 White LEDs (Rev 1)
Revision:
1 (February 25, 2014)
Description Of LED Light Sources
XLamp XP-E2 White LEDs (Series: XPEBWT)
This LM-80 report is applicable to the following order codes:
XPEBWT-xx-xxxx-xxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
3
85 °C
85 °C
350 mA
3000 K
25
6,048 hrs
L90(6k) > 36,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
1
105 °C
105 °C
350 mA
3000 K
25
9,072 hrs
L90(9k) > 54,400 hrs
L80(9k) > 54,400 hrs
L70(9k) > 54,400 hrs
4
55 °C
55 °C
700 mA
3000 K
25
7,056 hrs
L90(7k) > 42,300 hrs
L80(7k) > 42,300 hrs
L70(7k) > 42,300 hrs
2
85 °C
85 °C
700 mA
3000 K
25
7,056 hrs
L90(7k) = 18,300 hrs
L80(7k) = 37,100 hrs
L70(7k) > 42,300 hrs
5
105 °C
105 °C
700 mA
3000 K
25
6,048 hrs
L90(6k) = 17,100 hrs
L80(6k) = 35,900 hrs
L70(6k) > 36,300 hrs
The following data sets are extended versions of some of the data sets above, but have sample sizes less than 25 units each. Please refer
to each individual data set for the exact number of samples included. These data sets are projected according to IES TM-21-11 standards
and the Reported L70 lifetimes presented are valid under TM-21-11. However, the use of these extended data sets may not be allowed by
a particular program because of the sample size of the data set. Cree recommends reviewing the details on LM-80 lumen maintenance for
each program to verify that data sets with fewer than 25 samples are considered valid. If not, the data sets above should be referenced.
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
3+
85 °C
85 °C
350 mA
3000 K
18
9,072 hrs
L90(9k) > 49,900 hrs
L80(9k) > 49,900 hrs
L70(9k) > 49,900 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
70
LED Components IES LM-80 Testing results
XLamp® XP-G White LEDs (Rev 7)
Revision:
7 (March 18, 2014)
Description Of LED Light Sources
XLamp XP-G White LEDs (Series: XPGWHT)
This LM-80 report is applicable to the following order codes:
XPGWHT-xx-xxxx-xxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
17
55 °C
55 °C
1000 mA
3000 K
25
6,048 hrs
L95(6k) > 36,300 hrs
L90(6k) > 36,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
13
85 °C
85 °C
1000 mA
3000 K
25
13,608 hrs
L95(14k) > 81,600 hrs
L90(14k) > 81,600 hrs
L80(14k) > 81,600 hrs
L70(14k) > 81,600 hrs
12,096 hrs
L95(12k) > 72,600 hrs
L90(12k) > 72,600 hrs
L80(12k) > 72,600 hrs
L70(12k) > 72,600 hrs
14
105 °C
105 °C
1000 mA
3000 K
25
15
55 °C
55 °C
1500 mA
3000 K
25
12,096 hrs
L95(12k) > 72,600 hrs
L90(12k) > 72,600 hrs
L80(12k) > 72,600 hrs
L70(12k) > 72,600 hrs
16
85 °C
85 °C
1500 mA
3000 K
25
12,096 hrs
L95(12k) > 72,600 hrs
L90(12k) > 72,600 hrs
L80(12k) > 72,600 hrs
L70(12k) > 72,600 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
71
LED Components IES LM-80 Testing results
XLamp® XP-G2 White LEDs (Rev 8)
Revision:
8 (January 6, 2016)
Description Of LED Light Sources
XLamp XP-G2 White LEDs (Series: XPGBWT)
This LM-80 report is applicable to the following order codes:
XPGBWT-xx-xxxx-xxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
11
125 °C
125 °C
350 mA
3000 K
25
9,072 hrs
L90(9k) > 54,400 hrs
L80(9k) > 54,400 hrs
L70(9k) > 54,400 hrs
9
85 °C
85 °C
500 mA
3000 K
25
10,584 hrs
L90(11k) > 63,500 hrs
L80(11k) > 63,500 hrs
L70(11k) > 63,500 hrs
10
105 °C
105 °C
500 mA
3000 K
25
13,608 hrs
L90(11k) > 51,400 hrs
L80(11k) > 51,400 hrs
L70(11k) > 51,400 hrs
15
105° C
105 °C
700 mA
3000 K
20
8,568 hrs
L90(8.5k) > 51,400 hrs
L80(8.5k) > 51,400 hrs
L70(8.5k) > 51,400 hrs
3
55 °C
55 °C
1000 mA
3000 K
25
9,072 hrs
L90(9k) > 54,400 hrs
L80(9k) > 54,400 hrs
L70(9k) > 54,400 hrs
16
85° C
85 °C
1000 mA
4000 K
20
8,568 hrs
L90(8.5k) > 51,400 hrs
L80(8.5k) > 51,400 hrs
L70(8.5k) > 51,400 hrs
17
85° C
85 °C
1000 mA
3000 K
20
9,072 hrs
L90(9k) > 54,400 hrs
L80(9k) > 54,400 hrs
L70(9k) > 54,400 hrs
18
105 °C
105 °C
1000 mA
3000 K
20
8,568 hrs
L90(8.5k) > 51,400 hrs
L80(8.5k) > 51,400 hrs
L70(8.5k) > 51,400 hrs
13
55 °C
55 °C
1500 mA
3000 K
25
7,560 hrs
L90(8k) = 36,400 hrs
L80(8k) > 45,400 hrs
L70(8k) > 45,400 hrs
7
85 °C
85 °C
1500 mA
3000 K
25
6,048 hrs
L90(6k) = 24,500 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
The following data sets are extended versions of some of the data sets above, but have sample sizes less than 25 units each. Please refer
to each individual data set for the exact number of samples included. These data sets are projected according to IES TM-21-11 standards
and the Reported L70 lifetimes presented are valid under TM-21-11. However, the use of these extended data sets may not be allowed by
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
72
LED Components IES LM-80 Testing results
XLamp® XP-G2 White LEDs (Rev 6) - Continued
a particular program because of the sample size of the data set. Cree recommends reviewing the details on LM-80 lumen maintenance for
each program to verify that data sets with fewer than 25 samples are considered valid. If not, the data sets above should be referenced.
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
9+
85 °C
85 °C
500 mA
3000 K
20
13,608 hrs
L90(14k) > 81,600 hrs
L80(14k) > 81,600 hrs
L70(14k) > 81,600 hrs
10+
105 °C
105 °C
500 mA
3000 K
19
14,112 hrs
L90(14k) > 77,600 hrs
L80(14k) > 77,600 hrs
L70(14k) > 77,600 hrs
3+
55 °C
55 °C
1000 mA
3000 K
20
10,080 hrs
L90(10k) = 49,700 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
73
LED Components IES LM-80 Testing results
XLamp® XP-G3 White LEDs (Rev 1)
Revision:
1 (April 8, 2016)
Description Of LED Light Sources
XLamp XP-G3 White LEDs (Series: XPGDWT)
This LM-80 report is applicable to the following order codes:
XPGDWT-xx-xxxx-xxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
1
85 °C
85 °C
1000 mA
3000 K
25
6,048 hrs
L90(6k) > 36,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
2
105 °C
105 °C
1500 mA
3000 K
20
6,048 hrs
L90(6k) > 36,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
74
LED Components IES LM-80 Testing results
XLamp® XP-L White LEDs (Rev 6)
Revision:
6 (June 6, 2016)
Description Of LED Light Sources
XLamp XP-L White LEDs (Series: XPLAWT)
This LM-80 report is applicable to the following order codes:
XPLAWT-xx-xxxx-xxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
6
105 °C
105 °C
1050 mA
3000 K
20
8,064 hrs
L90(8k) > 48,400 hrs
L80(8k) > 48,400 hrs
L70(8k) > 48,400 hrs
5
85 °C
85 °C
1500 mA
3000 K
20
10,080 hrs
L90(10k) > 60,500 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
3
105 °C
105 °C
1500 mA
3000 K
25
11,592 hrs
L90(12k) = 66,600 hrs
L80(12k) > 69,600 hrs
L70(12k) > 69,600 hrs
4
85 °C
85 °C
2100 mA
3000 K
25
10,080 hrs
L90(10k) = 42,100 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
1
105 °C
105 °C
2100 mA
3000 K
25
6,048 hrs
L90(6k) = 24,000 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
2
85 °C
85 °C
3000 mA
3000 K
25
6,048 hrs
L90(6k) = 16,300 hrs
L80(6k) = 35,800 hrs
L70(6k) > 36,300 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
75
LED Components IES LM-80 Testing results
XLamp® XQ-B White LEDs (Rev 1)
Revision:
1 (October 15, 2013)
Description Of LED Light Sources
XLamp XQ-B White LEDs (Series: XQBAWT)
This LM-80 report is applicable to the following order codes:
XQBAWT-xx-xxxx-xxxxxxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
3
85 °C
85 °C
100 mA
3000 K
25
6,048 hrs
L90(6k) = 17,200 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
1
85 °C
85 °C
200 mA
3000 K
25
6,048 hrs
L90(6k) = 11,600 hrs
L80(6k) = 24,600 hrs
L70(6k) > 36,300 hrs
2
105 °C
105 °C
200 mA
3000 K
25
6,048 hrs
L90(6k) = 8,440 hrs
L80(6k) = 18,800 hrs
L70(6k) = 30,500 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
76
LED Components IES LM-80 Testing results
XLamp® XQ-D White LEDs (Rev 0)
Revision:
0 (October 14, 2013)
Description Of LED Light Sources
XLamp XQ-D White LEDs (Series: XQDAWT)
This LM-80 report is applicable to the following order codes:
XQDAWT-xx-xxxx-xxxxxxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
1
105 °C
105 °C
500 mA
3000 K
25
7,560 hrs
L90(8k) = 13,800 hrs
L80(8k) = 32,500 hrs
L70(8k) > 45,400 hrs
2
105 °C
105 °C
700 mA
3000 K
25
6,048 hrs
L90(6k) = 12,500 hrs
L80(6k) = 30,100 hrs
L70(6k) > 36,300 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
77
LED Components IES LM-80 Testing results
XLamp® XQ-E Red, Red-Orange, Phosphor‑Converted Amber, Green, Blue & Royal Blue LEDs (Rev 0)
Revision:
0 (March 30, 2016)
Description Of LED Light Sources
XLamp XQ-E Red LEDs (Series: XQERED)
XLamp XQ-E Red-Orange LEDs (Series: XQERDO)
XLamp XQ-E Phosphor‑Converted Amber LEDs (Series: XQEAPA)
XLamp XQ-E Green LEDs (Series: XQEGRN)
XLamp XQ-E Blue LEDs (Series: XQEBLU)
XLamp XQ-E Royal Blue LEDs (Series: XQEROY
This LM-80 report is applicable to the following order codes:
XQERED-xx-xxxx-xxxxxxxxx
XQERDO-xx-xxxx-xxxxxxxxx
XQEAPA-xx-xxxx-xxxxxxxxx
XQEGRN-xx-xxxx-xxxxxxxxx
XQEBLU-xx-xxxx-xxxxxxxxx
XQEROY-xx-xxxx-xxxxxxxxx
No failures occurred during testing.
Test Summary
LED Color
Data Set
Case
Temp.
[TS]
Ambient
Temp. [TA]
Drive Current
[IF]
Sample
Count
Test Duration
Reported TM-21
Lifetimes
R1
85 °C
85 °C
1000 mA
25
12,096 hrs
L90(12k) > 72,600 hrs
L80(12k) > 72,600 hrs
L70(12k) > 72,600 hrs
R2
105 °C
105 °C
1000 mA
25
12,096 hrs
L90(12k) > 72,600 hrs
L80(12k) > 72,600 hrs
L70(12k) > 72,600 hrs
PCA1
105 °C
105 °C
700 mA
20
9,576 hrs
L90(10k) = 10,500 hrs
L80(10k) = 29,400 hrs
L70(10k) = 50,800 hrs
PCA2
85 °C
85 °C
1000 mA
20
9,072 hrs
L90(9k) = 10,600 hrs
L80(9k) = 33,000 hrs
L70(9k) > 54,400 hrs
PCA3
105 °C
105 °C
1000 mA
20
6,048 hrs
L90(6k) = 9,490 hrs
L80(6k) = 19,000 hrs
L70(6k) = 29,800 hrs
Red,
Red-Orange
PhosphorConverted
Amber
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
78
LED Components IES LM-80 Testing results
XLamp® XQ-E Red, Red-Orange, Phosphor‑Converted Amber, Green, Blue & Royal Blue LEDs (Rev 0) Continued
LED Color
Data Set
Case
Temp.
[TS]
Ambient
Temp. [TA]
Drive Current
[IF]
Sample
Count
Test Duration
Reported TM-21
Lifetimes
G1
85 °C
85 °C
500 mA
20
8,064 hrs
L90(8k) > 48,400 hrs
L80(8k) > 48,400 hrs
L70(8k) > 48,400 hrs
G2
105 °C
105 °C
500 mA
20
8,064 hrs
L90(8k) > 48,400 hrs
L80(8k) > 48,400 hrs
L70(8k) > 48,400 hrs
G3
85 °C
85 °C
1000 mA
20
7,560 hrs
L90(8k) > 45,400 hrs
L80(8k) > 45,400 hrs
L70(8k) > 45,400 hrs
G4
105 °C
105 °C
1000 mA
20
6,048 hrs
L90(6k) = 22,500 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
B1
85 °C
85 °C
500 mA
20
7,560 hrs
L90(8k) > 45,400 hrs
L80(8k) > 45,400 hrs
L70(8k) > 45,400 hrs
B2
105 °C
105 °C
500 mA
20
7,560 hrs
L90(8k) > 45,400 hrs
L80(8k) > 45,400 hrs
L70(8k) > 45,400 hrs
B3
85 °C
85 °C
1000 mA
20
7,560 hrs
L90(8k) > 45,400 hrs
L80(8k) > 45,400 hrs
L70(8k) > 45,400 hrs
B4
105 °C
105 °C
1000 mA
20
7,560 hrs
L90(8k) > 45,400 hrs
L80(8k) > 45,400 hrs
L70(8k) > 45,400 hrs
RB1
85 °C
85 °C
1000 mA
17
11,592 hrs
L90(12k) > 63,800 hrs
L80(12k) > 63,800 hrs
L70(12k) > 63,800 hrs
RB2
105 °C
105 °C
1000 mA
19
11,592 hrs
L90(12k) > 63,800 hrs
L80(12k) > 63,800 hrs
L70(12k) > 63,800 hrs
Green
Blue
Royal Blue
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
79
LED Components IES LM-80 Testing results
XLamp® XQ-E White LEDs (Rev 0)
Revision:
0 (December 11, 2014)
Description Of LED Light Sources
XLamp XQ-E White LEDs (Series: XQEAWT)
This LM-80 report is applicable to the following order codes:
XQEAWT-xx-xxxx-xxxxxxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
1
85 °C
85 °C
500 mA
3000 K
25
8,568 hrs
L90(9k) = 28,300 hrs
L80(9k) > 51,400 hrs
L70(9k) > 51,400 hrs
2
105 °C
105 °C
500 mA
3000 K
25
8,568 hrs
L90(9k) = 25,500 hrs
L80(9k) > 51,400 hrs
L70(9k) > 51,400 hrs
3
85 °C
85 °C
700 mA
3000 K
25
6,048 hrs
L90(6k) = 24,700 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
4
105 °C
105 °C
700 mA
3000 K
25
6,048 hrs
L90(6k) = 19,900 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
80
LED Components IES LM-80 Testing results
XLamp® XR-E White LEDs (Rev 1)
Revision:
1 (September 20, 2010)
Description Of LED Light Sources
XLamp XR-E White LEDs (Series: XREWHT)
This LM-80 report is applicable to the following order codes:
XREWHT-xx-xxxx-xxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
1
25 °C
25 °C
350 mA
6200 K
30
9,072 hrs
L90(9k) = 28,500 hrs
L80(9k) > 54,400 hrs
L70(9k) > 54,400 hrs
2
25 °C
25 °C
350 mA
2700 K
30
9,072 hrs
L90(9k) > 54,400 hrs
L80(9k) > 54,400 hrs
L70(9k) > 54,400 hrs
7
55 °C
55 °C
350 mA
6500 K
30
11,088 hrs
L90(11k) = 12,400 hrs
L80(11k) = 22,400 hrs
L70(11k) = 33,700 hrs
8
55 °C
55 °C
350 mA
2700 K
29
10,080 hrs
L90(10k) = 13,000 hrs
L80(10k) = 23,500 hrs
L70(10k) = 35,500 hrs
11
85 °C
85 °C
350 mA
6000 K
30
7,560 hrs
L90(8k) = 10,000 hrs
L80(8k) = 19,300 hrs
L70(8k) = 29,900 hrs
12
85 °C
85 °C
350 mA
3000 K
30
8,544 hrs
L90(9k) = 11,500 hrs
L80(9k) = 20,500 hrs
L70(9k) = 30,800 hrs
3
25 °C
25 °C
700 mA
6200 K
30
9,072 hrs
L90(9k) = 29,400 hrs
L80(9k) > 54,400 hrs
L70(9k) > 54,400 hrs
4
25 °C
25 °C
700 mA
2700 K
30
9,072 hrs
L90(9k) > 54,400 hrs
L80(9k) > 54,400 hrs
L70(9k) > 54,400 hrs
9
55 °C
55 °C
1000 mA
6200 K
29
11,592 hrs
L90(12k) = 17,100 hrs
L80(12k) = 37,500 hrs
L70(12k) = 60,600 hrs
10
55 °C
55 °C
1000 mA
4500 K
30
10,080 hrs
L90(10k) = 12,600 hrs
L80(10k) = 24,800 hrs
L70(10k) = 38,700 hrs
13
85 °C
85 °C
1000 mA
6500 K
30
6,048 hrs
L90(6k) = 12,900 hrs
L80(6k) = 26,500 hrs
L70(6k) > 36,300 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
81
LED Components IES LM-80 Testing results
XLamp® XR-E White LEDs (Rev 1) - Continued
The following extended data sets have sample sizes less than 25 units each. Please refer to each individual data set for the exact number
of samples included. These data sets are projected according to IES TM-21-11 standards and the Reported L70 lifetimes presented are
valid under TM-21-11. However, the use of these extended data sets may not be allowed by a particular program because of the sample
size of the data set. Cree recommends reviewing the details on LM-80 lumen maintenance for each program to verify that data sets with
fewer than 25 samples are considered valid. If not, the data sets above should be referenced.
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
5
45 °C
45 °C
350 mA
6000 K
19
6,846 hrs
L90(7k) = 26,600 hrs
L80(7k) > 37,700 hrs
L70(7k) > 37,700 hrs
6
45 °C
45 °C
1000 mA
6500 K
20
14,616 hrs
L90(15k) = 19,100 hrs
L80(15k) = 37,900 hrs
L70(15k) = 59,200 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
82
LED Components IES LM-80 Testing results
XLamp® XT-E High Voltage White LEDs (Rev 0)
Revision:
0 (August 21, 2012)
Description Of LED Light Sources
XLamp XT-E High Voltage White LEDs (Series: XTEHVW)
This LM-80 report is applicable to the following order codes:
XTEHVW-xx-xxxx-xxxxxxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
1
55 °C
55 °C
44 mA
3000 K
25
6,048 hrs
L90(6k) > 36,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
2
85 °C
85 °C
44 mA
3000 K
25
6,048 hrs
L90(6k) > 36,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
3
105 °C
105 °C
44 mA
3000 K
25
6,048 hrs
L90(6k) = 13,500 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
4
55 °C
55 °C
66 mA
3000 K
25
6,048 hrs
L90(6k) = 25,100 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
5
85 °C
85 °C
66 mA
3000 K
25
6,048 hrs
L90(6k) > 36,300 hrs
L80(6k) > 36,300 hrs
L70(6k) > 36,300 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
83
LED Components IES LM-80 Testing results
XLamp® XT-E White LEDs (Rev 9)
Revision:
9 (June 6, 2016)
Description Of LED Light Sources
XLamp XT-E White LEDs (Series: XTEAWT)
This LM-80 report is applicable to the following order codes:
XTEAWT-xx-xxxx-xxxxxxxxx
No failures occurred during testing.
Test Summary
Data Set
Case
Temp.
[TS]
Ambient
Temp.
[TA]
Drive Current
[IF]
ANSI CCT
Target
Sample
Count
Test Duration
Reported TM-21
Lifetimes
8
85 °C
85 °C
500 mA
3000 K
20
10,080 hrs
L90(10k) > 60,500 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
9
105 °C
105 °C
500 mA
3000 K
20
10,080 hrs
L90(10k) > 60,500 hrs
L80(10k) > 60,500 hrs
L70(10K) > 60,500 hrs
3+
55 °C
55 °C
1000 mA
3000 K
16
18,144 hrs
L90(18k) = 45,600 hrs
L80(18k) = 88,500 hrs
L70(18k) > 99,800 hrs
10
85 °C
85 °C
1000 mA
3000 K
20
10,080 hrs
L90(10k) > 60,500 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
11
105 °C
105 °C
1000 mA
3000 K
20
10,080 hrs
L90(10k) > 60,500 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
5
55 °C
55 °C
1250 mA
3000 K
25
10,080 hrs
L90(10k) = 46,100 hrs
L80(10k) > 60,500 hrs
L70(10k) > 60,500 hrs
6
85 °C
85 °C
1250 mA
3000 K
25
9,072 hrs
L90(9k) = 19,300 hrs
L80(9k) = 41,400 hrs
L70(9k) > 54,400 hrs
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. This document is provided for informational purposes only and is not a warranty or a
specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any other agency of the federal government.
84