Cree® LMH2 850-lm and 1250-lm LED Modules with TrueWhite® Technology CLM-DS08 LMH2 Rev 3 Product family data sheet Cree LED modules provide lighting designers and manufacturers with simple, easy-to-adopt LED lighting solutions that reduce luminaire development time and speed time-to-market. The Cree LMH2 850-lm and 1250-lm LED modules are the ideal choice for enabling rapid luminaire development where bright, beautiful, long-life lighting is required. The LMH series of modules incorporates Cree’s award-winning TrueWhite LED technology into a system of driver electronics, optics and primary thermal management for use in residential and commercial lighting applications. This versatile LED lighting module jump-starts the design process for recessed downlights, wall sconces or pendant lights in demanding end markets such as retail, museums, hospitality and restaurants. Benefits for Luminaire Designers • • • • • Faster time-to-market and lower system cost with concurrently designed and tested optics, driver electronics, and primary thermal management Design flexibility provided by separated light source and power supply with broad selection of mounting and wiring options Wide variety of design applications enabled with 2700 K, 3000 K, 3500 K and 4000 K CCT Industry-leading 5-year limited system warranty backed by patented, reliable Cree LED technology Rapid regulatory approval and voluntary qualification of final luminaire enabled by: ◦◦ UL approval (120 V and 277 V) ◦◦ CE certification (230 V) ◦◦ California Title 24 compliance (120 V and 277 V) ◦◦ LED LM-80 data for US ENERGY STAR Light Source 120 V & 277 V Driver Benefits for End Users • • • • • • • Vibrant color rendering showcases the full beauty of people, rooms, and merchandise with > 90 CRI Significant energy savings over traditional lighting sources through superior efficacy > 80 lm/W Proprietary optics provide a uniform, visually comfortable appearance whether the module is powered on or off Designed to last 50,000 hours at L70 Consistent light quality over time and temperature delivered by built-in optical and thermal management system Specification grade dimmability down to 5% of rated light output using standard incandescent and electronic low-voltage dimmers (120 V and 230 V only) No UV or mercury 230 V Driver WWW.CREE.COM/MODULES features • • • Industry-leading module efficacy (light source + driver) at 80 lm/W 850- and 1250-lumen lighting units, the first members of an extended family of modules Optional heat sink Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Copyright © 2011-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree, the Cree logo and TrueWhite are registered trademarks and Cree TrueWhite is a trademark of Cree, Inc. Cree, Inc. Cree,Drive Inc. 4600 Silicon 4600 Silicon Drive Durham, NC 27703 NC 27703 USA Tel:Durham, +1.919.313.5300 USA Tel: +1.919.313.5300 www.cree.com/xlamp LMH2 850-lm & 1250-lm LED Module Characteristics Cree TrueWhite technology is a revolutionary way of generating white light with LEDs. It delivers high efficacy with beautiful light characteristics and color accuracy, while maintaining color consistency over the life of the product. LMH2 Light Source CCT (K) CRI Average Input Power (W)1 Module Efficacy (lm/W)3 Order Code 4000 > 90 10.5 80 LMH020-0850-40G9-00000TW 3500 > 90 10.5 80 LMH020-0850-35G9-00000TW 3000 > 90 10.5 80 LMH020-0850-30G9-00000TW 2700 > 90 10.5 80 LMH020-0850-27G9-00000TW 4000 > 90 15.5 80 LMH020-1250-40G9-00000TW 3500 > 90 15.5 80 LMH020-1250-35G9-00000TW 3000 > 90 15.5 80 LMH020-1250-30G9-00000TW 2700 > 90 15.5 80 LMH020-1250-27G9-00000TW Max. Rated Input Power (W)1 Input Voltage (V)1 Frequency (Hz) Dimming Order Code 18 120 17 277 18 230 Luminous Flux (lm)1,2 850 1250 LMD125 Driver 1. 2. 3. Power Factor 850 lm 1250 lm 60 .97 .99 TRIAC LMD125-0018-C440-1010000 60 .92 .98 N/A LMD125-0017-C440-3000000 50/60 .90 .95 TRIAC LMD125-0018-C440-2010000 ±10% variance Measured at steady state, TC = 55 °C Includes LMD125 driver losses The operating temperature at the case temperature (Tc) point is 0-70 °C. chromaticity photometry The Cree LMH2 LED module provides high color consistency within a 3-step MacAdams ellipse around the specified color temperature. Individual LEDs are tested and matched to meet our designed chromaticity specification. Secondary optics can be added to the module but will reduce light output and may also alter the color characteristics of the final luminaire design. Thermal management guidelines The Cree LMH2 LED module is designed to perform in a variety of environments without the need for active cooling. To achieve lifetime and performance estimates, and to maintain the warranty, the final luminaire design cannot allow the Tc point shown on page one to exceed 70 °C for the light source or power supply when the luminaire is at thermal equilibrium. Follow the mechanical and thermal design guidelines listed in the “Cree LMH2 LED Module Design Guide” to ensure proper thermal management. An optional heat sink is available. 90 ° 100 200 45 ° 300 400 500 Intensity (Candlepower) Angle 850 1250 0° 402 575 5° 399 571 15° 375 539 25° 331 479 35° 270 394 45° 202 297 55° 136 202 65° 79 118 75° 30 45 85° 3 5 90° 0 0 600 0 Zonal Lumens - 850 Zonal Lumens - 1250 Zone Lumens % Zone Lumens % Note: The heat sink is designed to work with all LMH2 lumen levels. 0-30° 295 34 0-30° 426 34 0-40° 464 54 0-40° 672 54 Optional Heat Sink Order Code 0-60° 742 87 0-60° 1082 86 0-90° 858 100 0-90° 1256 100 0-180° 858 100 0-180° 1256 100 LMH020-HS00-0000-0000001 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2011-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and TrueWhite are registered of Cree, Inc. trademarks and Cree TrueWhite is a trademark of Cree, Inc. 2 8 LMH2 850-lm & 1250-lm LED Module 7 5 6 3 4 DO NOT SCALE DRAWING REVISION THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF CREE, INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT WRITTEN PERMISSION OF CREE, INC. IS PROHIBITED. REV A FINISH DESCRIPTION FINISH SAMPLE RELEASE MATERIAL MATERIAL INTERPRET GEOMETRIC TOLERANCING PER: PROPRIETARY AND CONFIDENTIAL Q.A. DIMENSIONS ARE IN INCHES TOLERANCES: FRACTIONAL 1/16” ANGULAR: MACH 0.5° BEND 1° TWO PLACE DECIMAL 0.063 THREE PLACE DECIMAL 0.015 ALL INSIDE RADII EQUAL MATERIAL THICKNESS UNLESS NOTED A UNLESS OTHERWISE SPECIFIED: Light Source 8 5 6 7 4 120 V & 277 V Driver 2 3 1 B 200 ± 10 [8.0" ± 0.375"] STRIPPED 10 [0.375"] D D Tc LOCATION 67 60.3 30 20 ± 2 81 BC C 60.3 88.2(LENS) 88.2 C C 81 BC 20 ± 2 30 60.3 67 Optional Heat Sink Tc LOCATION (See Design Guide for exact location) 230 V Driver D Tc LOCATION 200 ± 10 [8.0" ± 0.375"] STRIPPED 10 [0.375"] B B 7 6 3 4 5 UNLESS OTHERWISE SPECIFIED: A PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF CREE, INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT WRITTEN PERMISSION OF CREE, INC. IS PROHIBITED. A REV SAMPLE RELEASE 7 6 5 DIMENSIONS ARE IN INCHES TOLERANCES: FRACTIONAL 1/16” ANGULAR: MACH 0.5° BEND 1° TWO PLACE DECIMAL 0.063 THREE PLACE DECIMAL 0.015 ALL INSIDE RADII EQUAL MATERIAL THICKNESS UNLESS NOTED DRAWN INTERPRET GEOMETRIC TOLERANCING PER: Q.A. MATERIAL MATERIAL FINISH DESCRIPTION FINISH REVISION 8 units: mm 8 SHADED AND FLAT VIEWS ARE FOR REFERENCE ONL ALL INSIDE RADII EQUAL MATERIAL THICKNESS UNL DIMENSIONS IN BRACKET [X.XX] ARE METRIC REFER COMMENTS: Mechanical Design 4 DO NOT SCALE DRAWING 3 NAME DATE DNR DDMMMYY CREE, INC. 4600 SILICON DR DURHAM, NC 27703 TITLE: CHECKED DESCRIPTION ENG APPR. MFG APPR. COMMENTS: SHADED AND FLAT VIEWS ARE FOR REFERENCE ONLY. ALL INSIDE RADII EQUAL MATERIAL THICKNESS UNLESS NOTED. DIMENSIONS IN BRACKETS [X.XX] ARE METRIC REFERENCE 2 SIZE DWG. NO. B XXXNNN A REV A SHEET 2 OF 2 SCALE: 1:1 WEIGHT: 1 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2011-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and TrueWhite are registered of Cree, Inc. trademarks and Cree TrueWhite is a trademark of Cree, Inc. 3 MFG APPR. ENG APPR. CHECKED DRAWN DNR NAME