XT-E High-Voltage Data and Binning & Labeling

CLD-DS43 REV 13C
Product family data sheet
Cree® XLamp® XT-E High-Voltage White LEDs
Product Description
FEATURES
The Cree XLamp® XT-E High Voltage White (HVW) LED provides
• Binned at 85 °C
the lighting‑class performance and reliability of Cree XLamp
• Available in 12‑V, 24‑V and 48‑V configurations
LEDs in a small‑form, high‑voltage configuration. The XT-E HVW
• Cree-standard mechanical footprint of 3.45 X 3.45 mm with
LED is an order of magnitude smaller than other high voltage
electrically neutral thermal path
LED arrays, allowing easy implementation of space‑constrained
• Unlimited floor life at ≤30 ºC/85% RH
lighting applications with smaller, more efficient high voltage
• Reflow solderable
drivers. Among these applications are small lamps such as B10,
• Available in standard CRI and 80‑minimum CRI
GU10 and E17.
configurations
• RoHS‑ and REACh‑compliant
www.cree.com/Xlamp
• UL® recognized component (E349212)
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are
registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
1
XLamp ® XT-E HVW LED
Table of Contents
Characteristics........................................................................................................................................................................................................ 3
Flux Characteristics - 12 V...................................................................................................................................................................................... 4
Flux Characteristics - 24 V...................................................................................................................................................................................... 4
Flux Characteristics - 48 V...................................................................................................................................................................................... 5
Relative Spectral Power Distribution................................................................................................................................................................... 11
Relative Flux vs. Junction Temperature............................................................................................................................................................... 12
Electrical Characteristics...................................................................................................................................................................................... 12
Relative Flux vs. Current....................................................................................................................................................................................... 14
Typical Spatial Distribution................................................................................................................................................................................... 15
Thermal Design..................................................................................................................................................................................................... 16
Performance Groups – Luminous Flux............................................................................................................................................................... 18
Performance Groups – Forward Voltage............................................................................................................................................................ 18
Performance Groups – Chromaticity................................................................................................................................................................... 19
Cree’s Standard White Chromaticity Regions Plotted on the CIE 1931 Curve.................................................................................................. 22
Cree’s Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions.......................................................................................... 24
Cree’s Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions................................................................... 25
Cree’s Standard Chromaticity Kits....................................................................................................................................................................... 26
Bin and Order Code Formats................................................................................................................................................................................ 27
Reflow Soldering Characteristics......................................................................................................................................................................... 28
Mechanical Dimensions....................................................................................................................................................................................... 31
Tape and Reel........................................................................................................................................................................................................ 32
Packaging.............................................................................................................................................................................................................. 33
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
2
XLamp ® XT-E HVW LED
Characteristics
Characteristics
Unit
Minimum
Typical
Thermal resistance, junction to solder point (12 V, 24 V)
°C/W
5
Thermal resistance, junction to solder point (48 V)
°C/W
6.5
Viewing angle (FWHM, 12 V)
degrees
130
Viewing angle (FWHM, 24 V, 48 V)
degrees
115
Temperature coefficient of voltage (12 V)
mV/°C
-8.5
Temperature coefficient of voltage (24 V)
mV/°C
-17
Temperature coefficient of voltage (48 V)
mV/°C
-37
ESD withstand voltage (HBM per Mil-Std-883D) (12 V)
V
ESD Classification (HBM per Mil-Std-883D) (24 V, 48 V)
Maximum
8000
Class 2
DC forward current (12 V)
mA
375
DC forward current (24 V)
mA
125
DC forward current (48 V)
mA
66
Reverse current
mA
-0.1
Forward voltage (12 V @ 88 mA, 85 °C)
V
11.3
13.5
Forward voltage (24 V @ 44 mA, 85 °C)
V
23
27.5
Forward voltage (48 V @ 22 mA, 85 °C)
V
46
55
LED junction temperature
°C
150
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
3
XLamp ® XT-E HVW LED
Flux Characteristics - 12 V (88 mA, TJ = 85 °C)
The following table provides order codes for 12-V XLamp XT-E HVW LEDs. For a complete description of the order code nomenclature,
please see the Bin and Order Code Formats section (page 27).
Chromaticity
Kit
CCT
E7
3000 K
F8
E8
2850 K
2700 K
Minimum Luminous Flux (lm)
@ 88 mA
Order Codes
Code
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
82 CRI Typical
80 CRI Minimum
Q5
107
122
XTEHVW-D0-0000-00000LDE7
XTEHVW-D0-0000-00000HDE7
Q4
100
114
XTEHVW-D0-0000-00000LCE7
XTEHVW-D0-0000-00000HCE7
Q3
93.9
106
XTEHVW-D0-0000-00000LBE7
XTEHVW-D0-0000-00000HBE7
XTEHVW-D0-0000-00000HCF8
Q4
100
114
XTEHVW-D0-0000-00000LCF8
Q3
93.9
107
XTEHVW-D0-0000-00000LBF8
XTEHVW-D0-0000-00000HBF8
Q2
87.4
100
XTEHVW-D0-0000-00000LAF8
XTEHVW-D0-0000-00000HAF8
XTEHVW-D0-0000-00000HCE8
Q4
100
114
XTEHVW-D0-0000-00000LCE8
Q3
93.9
107
XTEHVW-D0-0000-00000LBE8
XTEHVW-D0-0000-00000HBE8
Q2
87.4
100
XTEHVW-D0-0000-00000LAE8
XTEHVW-D0-0000-00000HAE8
Flux Characteristics - 24 V (44 mA, TJ = 85 °C)
The following tables provide order codes for 24-V XLamp XT-E HVW LEDs. For a complete description of the order code nomenclature,
please see the Bin and Order Code Formats section (page 27).
Chromaticity
Minimum Luminous Flux (lm)
@ 44 mA
Kit
CCT
Code
Flux (lm)
@ 85 °C
R2
114
130
XTEHVW-H0-0000-00000LEE3
XTEHVW-H0-0000-00000HEE3
E3
5000 K
Q5
107
122
XTEHVW-H0-0000-00000LDE3
XTEHVW-H0-0000-00000HDE3
Q4
100
114
XTEHVW-H0-0000-00000LCE3
XTEHVW-H0-0000-00000HCE3
F4
E7
F8
4750 K
3000 K
2850 K
Flux (lm)
@ 25 °C*
Order Codes
75 CRI Typical
82 CRI Typical
80 CRI Minimum
R2
114
130
XTEHVW-H0-0000-00000LEF4
XTEHVW-H0-0000-00000HEF4
Q5
107
122
XTEHVW-H0-0000-00000LDF4
XTEHVW-H0-0000-00000HDF4
Q4
100
114
XTEHVW-H0-0000-00000LCF4
XTEHVW-H0-0000-00000HCF4
Q4
100
114
XTEHVW-H0-0000-00000LCE7
Q3
93.9
107
XTEHVW-H0-0000-00000LBE7
XTEHVW-H0-0000-00000HBE7
Q2
87.4
100
XTEHVW-H0-0000-00000LAE7
XTEHVW-H0-0000-00000HAE7
XTEHVW-H0-0000-00000HCE7
Q3
93.9
107
XTEHVW-H0-0000-00000LBF8
XTEHVW-H0-0000-00000HBF8
Q2
87.4
100
XTEHVW-H0-0000-00000LAF8
XTEHVW-H0-0000-00000HAF8
P4
80.6
91.9
XTEHVW-H0-0000-00000L9F8
XTEHVW-H0-0000-00000H9F8
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 29).
•
Cree XLamp XT-E HVW LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the
minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by
the order code.
*
Flux values at 25 °C are calculated and for reference only.
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
4
XLamp ® XT-E HVW LED
Flux Characteristics - 24 V (44 mA, TJ = 85 °C) - Continued
Chromaticity
Minimum Luminous Flux (lm)
@ 44 mA
Kit
Code
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
Q3
93.9
Q2
P4
E8
CCT
2700 K
Order Codes
75 CRI Typical
82 CRI Typical
80 CRI Minimum
107
XTEHVW-H0-0000-00000LBE8
XTEHVW-H0-0000-00000HBE8
87.4
100
XTEHVW-H0-0000-00000LAE8
XTEHVW-H0-0000-00000HAE8
80.6
91.9
XTEHVW-H0-0000-00000L9E8
XTEHVW-H0-0000-00000H9E8
Flux Characteristics - 48 V (22 mA, TJ = 85 °C)
The following tables provide order codes for 48-V XLamp XT-E HVW LEDs. For a complete description of the order code nomenclature,
please see the Bin and Order Code Formats section (page 27).
Chromaticity
Minimum Luminous Flux (lm)
@ 22 mA
Kit
Code
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
No Minimum CRI
R5
139
159
XTEHVW-Q0-000000000LH51
R4
130
148
XTEHVW-Q0-000000000LG51
R3
122
139
XTEHVW-Q0-000000000LF51
R2
114
130
XTEHVW-Q0-000000000LE51
Q5
107
122
XTEHVW-Q0-000000000LD51
Q4
100
114
XTEHVW-Q0-000000000LC51
R5
139
159
XTEHVW-Q0-000000000LH53
R4
130
148
XTEHVW-Q0-000000000LG53
R3
122
139
XTEHVW-Q0-000000000LF53
R2
114
130
XTEHVW-Q0-000000000LE53
Q5
107
122
XTEHVW-Q0-000000000LD53
Q4
100
114
XTEHVW-Q0-000000000LC53
51
53
CCT
6200 K
6000 K
Order Codes
75 CRI Typical
82 CRI Typical
80 CRI Minimum
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 29).
•
Cree XLamp XT-E HVW LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the
minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by
the order code.
*
Flux values at 25 °C are calculated and for reference only.
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
5
XLamp ® XT-E HVW LED
Flux Characteristics - 48 V (22 mA, TJ = 85 °C) - Continued
Chromaticity
Minimum Luminous Flux (lm)
@ 22 mA
Kit
Code
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
No Minimum CRI
R5
139
159
XTEHVW-Q0-000000000LH50
R4
130
148
XTEHVW-Q0-000000000LG50
R3
122
139
XTEHVW-Q0-000000000LF50
R2
114
130
XTEHVW-Q0-000000000LE50
Q5
107
122
XTEHVW-Q0-000000000LD50
Q4
100
114
XTEHVW-Q0-000000000LC50
R5
139
159
XTEHVW-Q0-000000000LHE1
R4
130
148
XTEHVW-Q0-000000000LGE1
R3
122
139
XTEHVW-Q0-000000000LFE1
R2
114
130
XTEHVW-Q0-000000000LEE1
Q5
107
122
XTEHVW-Q0-000000000LDE1
Q4
100
114
XTEHVW-Q0-000000000LCE1
R5
139
159
XTEHVW-Q0-000000000LHE2
R4
130
148
XTEHVW-Q0-000000000LGE2
R3
122
139
XTEHVW-Q0-000000000LFE2
R2
114
130
XTEHVW-Q0-000000000LEE2
Q5
107
122
XTEHVW-Q0-000000000LDE2
Q4
100
114
XTEHVW-Q0-000000000LCE2
50
E1
E2
CCT
6200 K
6500 K
5700 K
Order Codes
75 CRI Typical
82 CRI Typical
80 CRI Minimum
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 29).
•
Cree XLamp XT-E HVW LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the
minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by
the order code.
*
Flux values at 25 °C are calculated and for reference only.
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
6
XLamp ® XT-E HVW LED
Flux Characteristics - 48 V (22 mA, TJ = 85 °C) - Continued
Chromaticity
Minimum Luminous Flux (lm)
@ 22 mA
Kit
Code
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
R4
130
148
XTEHVW-Q0-000000000LGE3
R3
122
139
XTEHVW-Q0-000000000LFE3
R2
114
130
XTEHVW-Q0-000000000LEE3
Q5
107
122
XTEHVW-Q0-000000000LDE3
Q4
100
114
XTEHVW-Q0-000000000LCE3
Q3
93.9
107
XTEHVW-Q0-000000000LBE3
R4
130
148
XTEHVW-Q0-000000000LGF4
R3
122
139
XTEHVW-Q0-000000000LFF4
R2
114
130
XTEHVW-Q0-000000000LEF4
Q5
107
122
XTEHVW-Q0-000000000LDF4
Q4
100
114
XTEHVW-Q0-000000000LCF4
Q3
93.9
107
XTEHVW-Q0-000000000LBF4
R4
130
148
XTEHVW-Q0-000000000LGE4
R3
122
139
XTEHVW-Q0-000000000LFE4
R2
114
130
XTEHVW-Q0-000000000LEE4
Q5
107
122
XTEHVW-Q0-000000000LDE4
Q4
100
114
XTEHVW-Q0-000000000LCE4
Q3
93.9
107
XTEHVW-Q0-000000000LBE4
E3
F4
E4
CCT
5000 K
4750 K
4500 K
Order Codes
No Minimum CRI
75 CRI Typical
82 CRI Typical
80 CRI Minimum
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 29).
•
Cree XLamp XT-E HVW LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the
minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by
the order code.
*
Flux values at 25 °C are calculated and for reference only.
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
7
XLamp ® XT-E HVW LED
Flux Characteristics - 48 V (22 mA, TJ = 85 °C) - Continued
Chromaticity
Minimum Luminous Flux (lm)
@ 22 mA
Kit
Code
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
R2
114
130
XTEHVW-Q0-000000000LEF5
Q5
107
122
XTEHVW-Q0-000000000LDF5
XTEHVW-Q0-000000000HDF5
Q4
100
114
XTEHVW-Q0-000000000LCF5
XTEHVW-Q0-000000000HCF5
Q3
93.9
107
XTEHVW-Q0-000000000LBF5
XTEHVW-Q0-000000000HBF5
Q2
87.4
100
XTEHVW-Q0-000000000LAF5
XTEHVW-Q0-000000000HAF5
P4
80.6
91.9
XTEHVW-Q0-000000000L9F5
XTEHVW-Q0-000000000H9F5
R2
114
130
XTEHVW-Q0-000000000LEE5
Q5
107
122
XTEHVW-Q0-000000000LDE5
XTEHVW-Q0-000000000HDE5
Q4
100
114
XTEHVW-Q0-000000000LCE5
XTEHVW-Q0-000000000HCE5
Q3
93.9
107
XTEHVW-Q0-000000000LBE5
XTEHVW-Q0-000000000HBE5
Q2
87.4
100
XTEHVW-Q0-000000000LAE5
XTEHVW-Q0-000000000HAE5
P4
80.6
91.9
XTEHVW-Q0-000000000L9E5
XTEHVW-Q0-000000000H9E5
R2
114
130
XTEHVW-Q0-000000000LEF6
Q5
107
122
XTEHVW-Q0-000000000LDF6
XTEHVW-Q0-000000000HDF6
Q4
100
114
XTEHVW-Q0-000000000LCF6
XTEHVW-Q0-000000000HCF6
Q3
93.9
107
XTEHVW-Q0-000000000LBF6
XTEHVW-Q0-000000000HBF6
Q2
87.4
100
XTEHVW-Q0-000000000LAF6
XTEHVW-Q0-000000000HAF6
P4
80.6
91.9
XTEHVW-Q0-000000000L9F6
XTEHVW-Q0-000000000H9F6
P3
73.9
84.3
XTEHVW-Q0-000000000L8F6
XTEHVW-Q0-000000000H8F6
F5
E5
F6
CCT
4250 K
4000 K
3750 K
Order Codes
No Minimum CRI
75 CRI Typical
82 CRI Typical
80 CRI Minimum
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 29).
•
Cree XLamp XT-E HVW LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the
minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by
the order code.
*
Flux values at 25 °C are calculated and for reference only.
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
8
XLamp ® XT-E HVW LED
Flux Characteristics - 48 V (22 mA, TJ = 85 °C) - Continued
Chromaticity
Minimum Luminous Flux (lm)
@ 22 mA
Kit
Code
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
R2
114
130
XTEHVW-Q0-000000000LEE6
Q5
107
122
XTEHVW-Q0-000000000LDE6
XTEHVW-Q0-000000000HDE6
Q4
100
114
XTEHVW-Q0-000000000LCE6
XTEHVW-Q0-000000000HCE6
Q3
93.9
107
XTEHVW-Q0-000000000LBE6
XTEHVW-Q0-000000000HBE6
Q2
87.4
100
XTEHVW-Q0-000000000LAE6
XTEHVW-Q0-000000000HAE6
P4
80.6
91.9
XTEHVW-Q0-000000000L9E6
XTEHVW-Q0-000000000H9E6
P3
73.9
84.3
XTEHVW-Q0-000000000L8E6
XTEHVW-Q0-000000000H8E6
Q5
107
122
XTEHVW-Q0-000000000LDF7
XTEHVW-Q0-000000000HDF7
Q4
100
114
XTEHVW-Q0-000000000LCF7
XTEHVW-Q0-000000000HCF7
Q3
93.9
107
XTEHVW-Q0-000000000LBF7
XTEHVW-Q0-000000000HBF7
Q2
87.4
100
XTEHVW-Q0-000000000LAF7
XTEHVW-Q0-000000000HAF7
P4
80.6
91.9
XTEHVW-Q0-000000000L9F7
XTEHVW-Q0-000000000H9F7
P3
73.9
84.3
XTEHVW-Q0-000000000L8F7
XTEHVW-Q0-000000000H8F7
Q5
107
122
XTEHVW-Q0-000000000LDE7
XTEHVW-Q0-000000000HDE7
Q4
100
114
XTEHVW-Q0-000000000LCE7
XTEHVW-Q0-000000000HCE7
Q3
93.9
107
XTEHVW-Q0-000000000LBE7
XTEHVW-Q0-000000000HBE7
Q2
87.4
100
XTEHVW-Q0-000000000LAE7
XTEHVW-Q0-000000000HAE7
P4
80.6
91.9
XTEHVW-Q0-000000000L9E7
XTEHVW-Q0-000000000H9E7
P3
73.9
84.3
XTEHVW-Q0-000000000L8E7
XTEHVW-Q0-000000000H8E7
E6
F7
E7
CCT
3500 K
3250 K
3000 K
Order Codes
No Minimum CRI
75 CRI Typical
82 CRI Typical
80 CRI Minimum
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 29).
•
Cree XLamp XT-E HVW LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the
minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by
the order code.
*
Flux values at 25 °C are calculated and for reference only.
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
9
XLamp ® XT-E HVW LED
Flux Characteristics - 48 V (22 mA, TJ = 85 °C) - Continued
Chromaticity
Minimum Luminous Flux (lm)
@ 22 mA
Kit
Code
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
Q4
100
Q3
F8
E8
CCT
Order Codes
82 CRI Typical
80 CRI Minimum
114
XTEHVW-Q0-000000000LCF8
XTEHVW-Q0-000000000HCF8
93.9
107
XTEHVW-Q0-000000000LBF8
XTEHVW-Q0-000000000HBF8
Q2
87.4
100
XTEHVW-Q0-000000000LAF8
XTEHVW-Q0-000000000HAF8
P4
80.6
91.9
XTEHVW-Q0-000000000L9F8
XTEHVW-Q0-000000000H9F8
P3
73.9
84.3
XTEHVW-Q0-000000000L8F8
XTEHVW-Q0-000000000H8F8
P2
67.2
76.7
XTEHVW-Q0-000000000L7F8
XTEHVW-Q0-000000000H7F8
Q4
100
114
XTEHVW-Q0-000000000LCE8
XTEHVW-Q0-000000000HCE8
Q3
93.9
107
XTEHVW-Q0-000000000LBE8
XTEHVW-Q0-000000000HBE8
Q2
87.4
100
XTEHVW-Q0-000000000LAE8
XTEHVW-Q0-000000000HAE8
P4
80.6
91.9
XTEHVW-Q0-000000000L9E8
XTEHVW-Q0-000000000H9E8
P3
73.9
84.3
XTEHVW-Q0-000000000L8E8
XTEHVW-Q0-000000000H8E8
P2
67.2
76.7
XTEHVW-Q0-000000000L7E8
XTEHVW-Q0-000000000H7E8
2850 K
2700 K
No Minimum CRI
75 CRI Typical
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 29).
•
Cree XLamp XT-E HVW LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the
minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by
the order code.
*
Flux values at 25 °C are calculated and for reference only.
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
10
XLamp ® XT-E HVW LED
Relative Spectral Power
Relative Spectral Power Distribution (12 V, 88 mA; 24 V, 44 mA; TJ = 85 °C)
Relative Radiant Power (%)
100
80
60
2600 K - 3700 K CCT
40
20
0
380
430
480
530
Relative Spectral Power
580
630
680
730
780
Wavelength (nm)
Relative Spectral Power Distribution (48 V, 22 mA; TJ = 85 °C)
100%
Relative Radiant Power
80%
60%
5000 K - 8300 K CCT
2600 K - 3700 K CCT
40%
20%
0%
380
430
480
530
580
630
680
730
780
Wavelength (nm)
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
11
XLamp ® XT-E HVW LED
Relative Flux Output vs. Junction Temperature
Relative Flux vs. Junction Temperature (12 V, 88 mA; 24 V, 44 mA; 48 V, 22 mA)
120%
Relative Luminous Flux
100%
80%
60%
40%
20%
0%
25
50
75
100
125
150
Junction Temperature (ºC)
Electrical Characteristics
(Tj = 85ºC) (T = 85 °C)
Electrical
Characteristics
J
375
Forward Current (mA)
300
12-V XT-E HVW
225
150
75
0
10.5
11.0
11.5
12.0
12.5
13.0
Forward Voltage (V)
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
12
XLamp ® XT-E HVW LED
Electrical Characteristics (Tj = 85ºC)
Electrical
Characteristics (TJ = 85 °C) - Continued
125
Forward Current (mA)
100
75
24-V XT-E HVW
50
25
0
21.0
21.5
22.0
22.5
23.0
23.5
24.0
24.5
25.0
25.5
Forward Voltage (V)
Electrical Characteristics (Tj = 85ºC)
66
Forward Current (mA)
55
44
48-V XT-E HVW
33
22
11
0
40
42
44
46
48
50
52
Forward Voltage (V)
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
13
XLamp ® XT-E HVW LED
Relative Intensity vs. Current (Tj = 85ºC)
Relative Flux vs. Current (TJ = 85 °C)
350%
Relative Luminous Flux
300%
250%
200%
12-V XT-E HVW
150%
100%
50%
0%
Relative Intensity vs. CurrentForward
(Tj =
85ºC)
Current (mA)
0
75
150
225
300
375
250%
Relative Luminous Flux
200%
150%
24 V XT-E HVW
100%
50%
0%
0
25
50
75
100
125
Forward Current (mA)
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
14
XLamp ® XT-E HVW LED
Relative Intensity vs. Current (Tj = 85ºC)
Relative Flux vs. Current (TJ = 85 °C) - Continued
250%
Relative Luminous Flux
200%
150%
48-V XT-E HVW
100%
50%
0%
0
11
22
33
44
55
66
Forward Current (mA)
Typical Spatial Radiation Pattern
Typical Spatial Distribution (12-V XT-E HVW)
100
Relative Luminous Intensity (%)
80
60
40
20
-90
-70
-50
-30
-10
0
10
30
50
70
90
Angle (º)
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
15
XLamp ® XT-E HVW LED
Typical Spatial Radiation Pattern
Typical Spatial Distribution (24-V & 48-V XT-E HVW)
100%
Relative Luminous Intensity
80%
60%
40%
20%
-90
-70
-50
-30
-10
0%
10
30
50
70
90
Angle (º)
Thermal Design
Thermal Design
400
Maximum Current (mA)
350
300
250
12-V XT-E HVW
200
150
Rj-a = 10 °C/W
100
Rj-a = 15 °C/W
Rj-a = 20 °C/W
50
Rj-a = 25 °C/W
0
0
20
40
60
80
100
120
140
160
Ambient Temperature (ºC)
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
16
XLamp ® XT-E HVW LED
Thermal Design
Thermal Design - Continued
140
Maximum Current (mA)
120
100
80
24-V XT-E HVW
60
Rj-a = 10 °C/W
40
Rj-a = 15 °C/W
Rj-a = 20 °C/W
20
Rj-a = 25 °C/W
0
0
20
40
60
80
100
120
140
160
Ambient Temperature (ºC)
Thermal Design
70
Maximum Current (mA)
60
50
40
48-V XT-E HVW
30
Rj-a = 10 °C/W
20
Rj-a = 15 °C/W
10
Rj-a = 20 °C/W
Rj-a = 25 °C/W
0
0
20
40
60
80
100
120
140
160
Ambient Temperature (ºC)
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
17
XLamp ® XT-E HVW LED
Performance Groups – Luminous Flux (TJ = 85 °C)
XLamp XT-E High Voltage White LEDs are tested for luminous flux and placed into one of the following luminous-flux groups.
Group Code
Minimum Luminous Flux
Maximum Luminous Flux
N3
56.8
62
N4
62
67.2
P2
67.2
73.9
P3
73.9
80.6
P4
80.6
87.4
Q2
87.4
93.9
Q3
93.9
100
Q4
100
107
Q5
107
114
R2
114
122
R3
122
130
R4
130
139
R5
139
148
S2
148
156
Performance Groups – Forward Voltage (TJ = 85 °C)
48‑V XLamp XT-E High Voltage White LEDs are tested for forward voltage at 22 mA and placed into one the following voltage bins.
Group Code
Minimum Forward
Voltage (V)
0
Maximum Forward
Voltage (V)
No Vf Bin
1
40.0
42.5
2
42.5
45.0
3
45.0
47.5
4
47.5
50.0
5
50.0
52.5
6
52.5
55.0
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
18
XLamp ® XT-E HVW LED
Performance Groups – Chromaticity
Region
0A
0R
1A
1R
2A
2R
3A
3R
4A
4R
x
y
0.2950
0.2970
0.2920
0.3060
0.2984
0.3133
0.3009
0.2980
0.2950
0.2970
0.3009
0.3042
0.3037
0.2937
0.3048
0.3130
0.3144
0.3186
0.3068
0.3068
0.3144
0.3186
0.3161
0.3059
0.3093
Region
x
y
0.2920
0.3060
0.2895
0.3135
0.2962
0.3220
0.3042
0.2984
0.2880
0.2895
0.2870
0.3210
0.2937
0.3312
0.2962
0.3220
0.3207
0.3028
0.3304
0.3290
0.3115
0.3391
0.3130
0.3290
0.3213
0.3373
0.3113
0.3048
0.3207
0.3130
0.3113
0.3005
0.3415
0.3099
0.3099
0.3509
0.3196
0.3602
0.3115
0.3391
0.3205
0.3481
0.2993
0.3028
0.3304
0.3115
0B
0S
1B
1S
Region
x
y
0.2984
0.3133
0.2962
0.3220
0.3028
0.3304
0.3133
0.3048
0.3135
0.2962
0.2937
0.3312
0.3005
0.3415
0.3028
0.3304
0.3115
0.3205
0C
0T
1C
1T
Region
x
y
0.2984
0.3133
0.3048
0.3207
0.3068
0.3113
0.3207
0.3009
0.3042
0.3220
0.3037
0.2937
0.3009
0.3042
0.3068
0.3113
0.3093
0.2993
0.3391
0.3130
0.3290
0.3481
0.3213
0.3373
0.3221
0.3261
0.3290
0.3144
0.3186
0.3509
0.3144
0.3186
0.3221
0.3261
0.3231
0.3120
0.3391
0.3161
0.3059
0D
0U
1D
1U
0.3215
0.3350
0.3207
0.3462
0.3290
0.3538
0.3290
0.3417
0.3290
0.3417
0.3290
0.3538
0.3376
0.3616
0.3371
0.3490
0.3290
0.3300
0.3290
0.3417
0.3371
0.3490
0.3366
0.3369
0.3222
0.3243
0.3215
0.3350
0.3290
0.3417
0.3290
0.3300
0.3222
0.3243
0.3196
0.3602
0.3290
0.3690
0.3290
0.3300
0.3290
0.3300
0.3290
0.3690
0.3381
0.3762
0.3366
0.3369
0.3290
0.3180
0.3290
0.3538
0.3376
0.3616
0.3361
0.3245
0.3231
0.3120
0.3207
0.3462
0.3290
0.3538
0.3290
0.3180
0.3371
0.3490
0.3376
0.3616
0.3463
0.3687
0.3451
0.3554
0.3451
0.3554
0.3463
0.3687
0.3551
0.3760
0.3533
0.3620
0.3440
0.3427
0.3451
0.3554
0.3533
0.3620
0.3515
0.3487
0.3366
0.3369
0.3371
0.3490
0.3451
0.3554
0.3440
0.3427
0.3366
0.3369
0.3381
0.3762
0.3480
0.3840
0.3440
0.3428
0.3440
0.3428
0.3480
0.3840
0.3571
0.3907
0.3515
0.3487
0.3429
0.3307
0.3463
0.3687
0.3551
0.3760
0.3495
0.3339
0.3361
0.3245
0.3376
0.3616
0.3463
0.3687
0.3429
0.3307
0.3530
0.3597
0.3548
0.3736
0.3641
0.3804
0.3615
0.3659
0.3615
0.3659
0.3641
0.3804
0.3736
0.3874
0.3702
0.3722
0.3590
0.3521
0.3615
0.3659
0.3702
0.3722
0.3670
0.3578
0.3512
0.3465
0.3530
0.3597
0.3615
0.3659
0.3590
0.3521
0.3512
0.3465
0.3571
0.3907
0.3668
0.3957
0.3590
0.3521
0.3590
0.3521
0.3668
0.3957
0.3771
0.4034
0.3670
0.3578
0.3567
0.3389
0.3641
0.3804
0.3736
0.3874
0.3640
0.3440
0.3495
0.3339
0.3548
0.3736
0.3641
0.3804
0.3567
0.3389
2B
2S
3B
3S
4B
4S
2C
2T
3C
3T
4C
4T
2D
2U
3D
3U
4D
4U
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
19
XLamp ® XT-E HVW LED
Performance Groups – Chromaticity (continued)
Region
5A
5A1
5B1
5C1
5D1
5R
6A
6A1
6B1
6C1
x
y
0.3702
0.3722
0.3825
0.3798
0.3783
0.3646
Region
5B
x
y
0.3736
0.3874
0.3870
0.3958
0.3825
0.3798
Region
5C
x
y
0.3870
0.3958
0.4006
0.4044
0.3951
0.3876
Region
5D
x
y
0.3825
0.3798
0.3951
0.3876
0.3898
0.3716
0.3670
0.3578
0.3702
0.3722
0.3825
0.3798
0.3783
0.3646
0.3670
0.3578
0.3686
0.3649
0.3744
0.3685
0.3726
0.3612
0.3686
0.3649
0.3702
0.3722
0.3763
0.3760
0.3744
0.3685
0.3744
0.3685
0.3763
0.3760
0.3825
0.3798
0.3804
0.3721
0.3726
0.3612
0.3744
0.3685
0.3804
0.3721
0.3783
0.3646
0.3702
0.3722
0.3719
0.3797
0.3782
0.3837
0.3763
0.3760
0.3719
0.3797
0.3736
0.3874
0.3802
0.3916
0.3782
0.3837
0.3782
0.3837
0.3802
0.3916
0.3869
0.3958
0.3847
0.3877
0.3763
0.3760
0.3782
0.3837
0.3847
0.3877
0.3825
0.3798
0.3825
0.3798
0.3847
0.3877
0.3912
0.3917
0.3887
0.3836
0.3847
0.3877
0.3869
0.3958
0.3937
0.4001
0.3912
0.3917
0.3912
0.3917
0.3937
0.4001
0.4006
0.4044
0.3978
0.3958
0.3887
0.3836
0.3912
0.3917
0.3978
0.3958
0.3950
0.3875
0.3783
0.3646
0.3804
0.3721
0.3863
0.3758
0.3840
0.3681
0.3804
0.3721
0.3825
0.3798
0.3887
0.3836
0.3863
0.3758
0.3863
0.3758
0.3887
0.3836
0.3950
0.3875
0.3924
0.3794
0.3840
0.3681
0.3863
0.3758
0.3924
0.3794
0.3898
0.3716
0.3670
0.3578
0.3771
0.4034
0.3916
0.4127
0.3783
0.3646
0.3783
0.3646
0.3916
0.4127
0.4064
0.4221
0.3898
0.3716
0.3743
0.3502
0.3869
0.3958
0.4006
0.4044
0.3848
0.3565
0.3640
0.3440
0.3736
0.3874
0.3869
0.3958
0.3743
0.3502
0.3941
0.3848
0.3996
0.4015
0.4146
0.4089
0.4080
0.3916
0.4080
0.3916
0.4146
0.4089
0.4299
0.4165
0.4221
0.3985
0.4017
0.3752
0.4080
0.3916
0.4221
0.3985
0.4147
0.3814
0.3889
0.369
0.3941
0.3848
0.4080
0.3916
0.4017
0.3752
0.3889
0.3690
0.3915
0.3768
0.3981
0.3800
0.4080
0.3916
0.3915
0.3768
0.3941
0.3848
0.4010
0.3882
0.3981
0.3800
0.3981
0.3800
0.4010
0.3882
0.4080
0.3916
0.4048
0.3832
0.3953
0.3720
0.3981
0.3800
0.4048
0.3832
0.4017
0.3751
0.3941
0.3848
0.3968
0.3930
0.4040
0.3966
0.4010
0.3882
0.3968
0.3930
0.3996
0.4015
0.4071
0.4052
0.4040
0.3966
0.4040
0.3966
0.4071
0.4052
0.4146
0.4089
0.4113
0.4001
0.4010
0.3882
0.4040
0.3966
0.4113
0.4001
0.4080
0.3916
0.4080
0.3916
0.4113
0.4001
0.4186
0.4037
0.4150
0.3950
0.4113
0.4001
0.4146
0.4089
0.4222
0.4127
0.4186
0.4037
0.4186
0.4037
0.4222
0.4127
0.4299
0.4165
0.4259
0.4073
0.4150
0.3950
0.4186
0.4037
0.4259
0.4073
0.4221
0.3984
5A2
5B2
5C2
5D2
5S
6B
6A2
6B2
6C2
5A3
5B3
5C3
5D3
5T
6C
6A3
6B3
6C3
5A4
5B4
5C4
5D4
5U
6D
6A4
6B4
6C4
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
20
XLamp ® XT-E HVW LED
Performance Groups – Chromaticity (continued)
Region
6D1
6R
7A
7A1
7B1
7C1
7D1
8A
8A1
8B1
x
y
0.4017
0.3751
0.4048
0.3832
0.4116
0.3865
0.4082
0.3889
0.4017
0.3751
0.3957
0.3596
0.3840
0.3540
0.4221
0.4342
0.4260
0.3853
0.4147
0.3814
0.4147
0.3814
0.4183
0.3898
0.4242
0.3919
Region
x
y
0.4048
0.3832
0.4080
0.3916
0.4150
0.3950
0.3782
0.4116
0.3690
0.4054
0.4217
0.4273
0.4146
0.4089
0.3996
0.4015
0.3985
0.4299
0.4028
0.4430
0.4342
0.4028
0.4221
0.3985
0.4183
0.3898
0.4221
0.3984
0.4281
0.4006
6D2
6S
7B
7A2
Region
x
y
0.4116
0.3865
0.4150
0.3950
0.4221
0.3984
0.3865
0.4183
0.4191
0.4217
0.4382
0.4356
0.4299
0.4165
0.4146
0.4089
0.4165
0.4430
0.4212
0.4562
0.4465
0.4071
0.4342
0.4028
0.4242
0.3919
0.4281
0.4006
0.4342
0.4028
6D3
6T
7C
7A3
Region
x
y
0.4082
0.3782
0.4116
0.3865
0.4183
0.3898
0.3898
0.4147
0.3814
0.4273
0.4017
0.3751
0.4147
0.3814
0.4077
0.3652
0.3957
0.3596
0.4212
0.4342
0.4028
0.426
0.4465
0.4071
0.4373
0.3893
0.4260
0.3853
0.4203
0.3833
0.4242
0.3919
0.4300
0.3939
6D4
6U
7D
7A4
0.4203
0.3833
0.4242
0.3919
0.4300
0.3939
0.4259
0.3853
0.4221
0.3984
0.4259
0.4073
0.4322
0.4096
0.4281
0.4006
0.4259
0.4073
0.4299
0.4165
0.4364
0.4188
0.4322
0.4096
0.4322
0.4096
0.4364
0.4188
0.4430
0.4212
0.4385
0.4119
0.4281
0.4006
0.4322
0.4096
0.4385
0.4119
0.4342
0.4028
0.4342
0.4028
0.4385
0.4119
0.4449
0.4141
0.4403
0.4049
0.4385
0.4119
0.4430
0.4212
0.4496
0.4236
0.4449
0.4141
0.4449
0.4141
0.4496
0.4236
0.4562
0.4260
0.4513
0.4164
0.4403
0.4049
0.4449
0.4141
0.4513
0.4164
0.4465
0.4071
0.4259
0.3853
0.4300
0.3939
0.4359
0.3960
0.4316
0.3873
0.4300
0.3939
0.4342
0.4028
0.4403
0.4049
0.4359
0.3960
0.4359
0.3960
0.4403
0.4049
0.4465
0.4071
0.4418
0.3981
0.4316
0.3873
0.4359
0.3960
0.4418
0.3981
0.4373
0.3893
0.4465
0.4071
0.4562
0.4260
0.4687
0.4289
0.4582
0.4099
0.4582
0.4099
0.4687
0.4289
0.4813
0.4319
0.4700
0.4126
0.4483
0.3918
0.4582
0.4099
0.4700
0.4126
0.4593
0.3944
0.4373
0.3893
0.4465
0.4071
0.4582
0.4099
0.4483
0.3918
0.4373
0.3893
0.4418
0.3981
0.4475
0.3994
0.4428
0.3906
0.4418
0.3981
0.4465
0.4071
0.4523
0.4085
0.4475
0.3994
0.4475
0.3994
0.4523
0.4085
0.4582
0.4099
0.4532
0.4008
7B2
7C2
7D2
8B
8A2
7B3
7C3
7D3
8C
8A3
7B4
7C4
7D4
8D
8A4
0.4428
0.3906
0.4475
0.3994
0.4532
0.4008
0.4483
0.3919
0.4465
0.4071
0.4513
0.4164
0.4573
0.4178
0.4523
0.4085
0.4513
0.4164
0.4562
0.4260
0.4624
0.4274
0.4573
0.4178
0.4573
0.4178
0.4624
0.4274
0.4687
0.4289
0.4634
0.4193
0.4523
0.4085
0.4573
0.4178
0.4634
0.4193
0.4582
0.4099
8B2
8B3
8B4
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
21
XLamp ® XT-E HVW LED
Performance Groups – Chromaticity (continued)
Region
8C1
8D1
x
y
0.4582
0.4158
0.4634
0.4252
0.4695
0.4250
0.4641
0.4483
0.4532
0.4008
0.4589
0.4021
0.4538
0.3931
Region
x
y
0.4634
0.4193
0.4687
0.4289
0.4750
0.4304
0.4156
0.4695
0.3919
0.4532
0.4582
0.4099
0.4641
0.4112
0.4589
0.4021
8C2
8D2
Region
x
y
0.4695
0.4207
0.4750
0.4304
0.4813
0.4319
0.4207
0.4756
0.4008
0.4589
0.4641
0.4112
0.4700
0.4126
0.4646
0.4034
8C3
8D3
Region
x
y
0.4641
0.4112
0.4695
0.4207
0.4756
0.4221
0.4221
0.4700
0.4126
0.4021
0.4538
0.3931
0.4589
0.4021
0.4646
0.4034
0.4593
0.3944
8C4
8D4
Cree’s Standard White Chromaticity Regions Plotted on the CIE 1931 Curve
ANSI Cool White
0.40
5000 K
0.39
5700 K
0.38
3S
0.37
6500 K
2T
0.36
0.35
CCy
3B
2S
2C
1T
8000 K
0T
0.33
0S
0.32
0B
0.31
0.30
3R
2A
1D
2U
ANSI
C78.377A
2R
1A
1U
0D
0A
2D
1C
1B
0C
3A
2B
1S
0.34
1R
0U
0R
0.29
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.29
0.28
0.28
CCx
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
22
XLamp ® XT-E HVW LED
Cree’s Standard White Chromaticity Regions Plotted on the CIE 1931 Curve - Continued
ANSI Neutral White and ANSI Warm White - 48-V XT-E HVW
0.46
0.45
2700 K
3000 K
0.44
0.43
3500 K
0.42
4000 K
CCy
6C3
4500 K
6C2
6B3
0.40
6B2
5C3
5000 K
0.39
5C4
0.38
5B1
4C
0.37
6A2
5D3
5D2
5A3
7A1
7A4
8A1
7D4
7D1
8A3
8A2
8D1
8A4
4D
8C4
8D3
8D2
8D4
6D4
6D1
6A4
5D1
ANSI
C78.377A
5A4
3C
8C1
8B4
8C3
8C2
6A1
5D4
5A2
4B
6D2
6A3
5B4
7A3
7A2
6D3
6B1
5C1
5B2
0.36
6C1
6B4
5C2
5B3
7D3
7D2
8B1
7C4
7C1
7B4
7B1
6C4
7C2
7B3
7B2
0.41
8B3
8B2
7C3
5A1
3B
4A
3D
0.35
3A
0.34
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.33
CCx
ANSI Neutral White and ANSI Warm White - 12-V & 24-V XT-E HVW
0.45
0.44
2900 K
0.43
2600 K
3000 K
3200 K
0.42
3500 K
7B
4000 K
0.40
6C
4300 K
0.39
0.37
4B
3C
0.36
3B
3D
0.35
8D
7A
6D
5B
4C
8A
7D
5C
4750 K
5300 K
0.38
6B
4500 K
5000 K
8C
8B
7C
3700 K
0.41
CCy
2700 K
6A
5D
ANSI
C78.377A
5A
4D
4A
3A
0.34
0.33
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.32
0.32
CCx
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
23
XLamp ® XT-E HVW LED
Cree’s Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions
0.40
0.40
5000 K
0.39
0.38
3S
51
6500 K
0.36
0T
0C
0D
0A
0T
CCy
0.33
2U
ANSI
C78.377A
2R
1U
0S
0.32
0C
0.31
1R
1R
0U
0.36
0.35
0.34
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.30
0.28
0.29
0.28
0.28
0.29
0.29
ANSI
C78.377A
1U
0R
0.29
0.28
2U
2R
1A
0.30
0R
CCx
CCx
0.40
0.40
5000 K
0.39
0.38
0.38
3S
50
6500 K
0.36
1U
0.31
1R
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.28
0.29
0.28
0.28
0.29
0.30
1R
0U
0R
0R
0.29
1U
0D
0.30
0.29
0.28
ANSI
C78.377A
2R
1A
0A
0U
2U
0.36
0A
0.30
0C
0B
1D
0.35
0D
0S
0.32
3R
2A
1B
0.34
0.31
ANSI
C78.377A
2R
1A
0T
0.33
2U
2D
1C
0.33
0C
0B
1D
3A
2B
1S
0.32
0S
0.32
3R
2A
1B
2C
8000 K
0.34
3B
2S
1T
0.31
0T
0.33
3A
2D
1C
2T
E1
0.35
2B
1S
0.36
3B
CCy
8000 K
3S
6500 K
2C
1T
0.34
5700 K
0.37
2T
2S
0.35
5000 K
0.39
5700 K
0.37
CCy
3R
2A
1D
0D
0A
0U
2D
1C
1B
0B
3A
2B
1S
0.33
0.30
3R
2A
1D
1A
1T
0.34
0.32
0B
0.31
1C
1B
0S
0.32
2D
3B
2C
8000 K
3A
2B
3S
2T
2S
0.35
0.31
0.33
0.36
3B
1T
1S
53
6500 K
2C
8000 K
0.34
5700 K
0.37
2T
2S
0.35
CCy
0.38
5700 K
0.37
5000 K
0.39
CCx
CCx
0.40
5000 K
0.39
0.38
5700 K
E2
0.37
6500 K
0.36
3B
2S
0.35
CCy
3S
2T
2C
1T
8000 K
0.34
0T
0.33
0S
0.32
0C
0.31
3R
2A
2U
1D
ANSI
C78.377A
2R
1A
0D
0A
2D
1C
1B
0B
3A
2B
1S
1U
1R
0U
0.30
0R
0.29
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.29
0.28
0.28
CCx
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
24
XLamp ® XT-E HVW LED
Cree’s Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions
0.46
0.45
2700 K
3000 K
0.44
0.43
0.42
4000 K
0.41
E6
4500 K
E5
0.40
CCy
E7
3500 K
5000 K
0.39
0.38
E3
0.37
E4
6D2
6A3
6A2
7A4
7A1
8B3
8C1
8B4
8C2
8C3
8C4
8D3
8D2
8D4
6A4
6A1
5D4
5D1
ANSI
C78.377A
5A4
3B
8B2
6D1
5D2
5A2
6D4
8D1
8A4
8A1
7D4
7D1
8A3
8A2
7D3
7D2
7A3
7A2
6D3
8B1
7C4
7C1
7B4
7B1
6C1
6B1
5C4
5D3
5A3
4B
3C
5A1
4D
0.36
5B1
6C2
6C4
6B4
5C1
5B4
4C
6B2
5C3
5C2
5B3
5B2
6C3
6B3
7C2
7B3
7B2
7C3
E8
4A
3D
0.35
3A
0.34
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.33
CCx
0.46
0.45
2700 K
3000 K
0.44
0.43
3500 K
0.42
4000 K
0.41
4500 K
CCy
0.40
0.39
F4
0.38
0.37
6B1
5C4
6A2
5D3
7A2
6D3
6D2
6A3
5D2
5A3
5A2
4B
6D4
7A1
7A4
7A3
7D1
7D2
7D4
7D3
8A1
8A2
8A4
8A3
8D1
8B4
8D2
8C1
8C2
8C3
8C4
8D3
8D4
6D1
6A4
5D4
6A1
5D1
ANSI
C78.377A
5A4
4D
3B
5B1
6C1
7C1
7B4
7B1
6C4
6B4
5C1
5B4
3C
0.36
5B3
5B2
4C
6C2
8B1
7C4
8B3
8B2
7C3
7C2
7B3
7B2
6B2
5C3
5C2
F7
6C3
6B3
F5
5000 K
F6
F8
5A1
4A
3D
0.35
3A
0.34
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.33
CCx
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
25
XLamp ® XT-E HVW LED
Cree’s Standard Chromaticity Kits
The following table provides the chromaticity bins associated with chromaticity kits for 12-V XT-E HVW LEDs.
Color
Warm
White
CCT
Kit
Chromaticity Bins
3000 K
E7
7A, 7B, 7C, 7D
2850 K
F8
7C, 7D, 8A, 8B
2700 K
E8
8A, 8B, 8C, 8D
The following table provides the chromaticity bins associated with chromaticity kits for 24-V XT-E HVW LEDs.
Color
CCT
Kit
Chromaticity Bins
Neutral
White
5000 K
E3
3A, 3B, 3C, 3D
4750 K
F4
3C, 3D, 4A, 4B
3000 K
E7
7A, 7B, 7C, 7D
2850 K
F8
7C, 7D, 8A, 8B
2700 K
E8
8A, 8B, 8C, 8D
Warm
White
The following table provides the chromaticity bins associated with chromaticity kits for 48-V XT-E HVW LEDs.
Color
Cool
White
Neutral
White
Warm
White
CCT
Kit
Chromaticity Bins
6200 K
51
0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S
6000 K
53
1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S
6200 K
50
1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D
6500 K
E1
1A, 1B, 1C, 1D
5700 K
E2
2A, 2B, 2C, 2D
5000 K
E3
3A, 3B, 3C, 3D
4750 K
F4
3C, 3D, 4A, 4B
4500 K
E4
4A, 4B, 4C, 4D
4250 K
F5
4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4
4000 K
E5
5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4
5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4
3750 K
F6
3500 K
E6
6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4
3250 K
F7
6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4
3000 K
E7
7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4
2850 K
F8
7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4
2700 K
E8
8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
26
XLamp ® XT-E HVW LED
Bin and Order Code Formats
Bin codes and order codes for XT-E High Voltage White LEDs are configured as follows:
Bin Code
Order Code
Series
XTE = XT-E
Series
XTE = XT-E
Configuration
B = Voltage class
D = Reel size
Configuration
B = Voltage class
Luminous flux group
Color Specification
L = Standard CRI
H = 80 CRI minimum
Chromaticity
SSSCCC-BD-HHHH-NNNNNVFGG
Color specification
L = Standard CRI
H = 80 CRI minimum
SSSCCC-B-WWW-FFF-VR-AAAA
Flux
Internal code
Internal code
Voltage performance group
Color
HVW = High Voltage White
Chromaticity group
Color
HVW = High Voltage White
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
27
XLamp ® XT-E HVW LED
Reflow Soldering Characteristics
In testing, Cree has found XLamp XT-E HVW LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a
general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder
paste used.
Note that this general guideline may not apply to all PCB designs and configurations of reflow-soldering equipment.
tP
TP
Critical Zone
TL to TP
Temperature
Ramp-up
TL
tS
Tsmax
Tsmin
Ramp-down
ts
Preheat
25
t 25˚C to Peak
IPC/JEDEC J-STD-020C
Time
Profile Feature
Average Ramp-Up Rate (Tsmax to Tp)
Lead-Free Solder
1.2 °C/second
Preheat: Temperature Min (Tsmin)
120 °C
Preheat: Temperature Max (Tsmax)
170 °C
Preheat: Time (tsmin to tsmax)
Time Maintained Above: Temperature (TL)
Time Maintained Above: Time (tL)
Peak/Classification Temperature (Tp)
65-150 seconds
217 °C
45-90 seconds
235 - 245 °C
Time Within 5 °C of Actual Peak Temperature (tp)
20-40 seconds
Ramp-Down Rate
1 - 6 °C/second
Time 25 °C to Peak Temperature
4 minutes max.
Note: All temperatures refer to topside of the package, measured on the package body surface.
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
28
XLamp ® XT-E HVW LED
Notes
Measurements
The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely
represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors
that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated values are
provided for informational purposes only and are not intended as specifications.
Pre‑Release Qualification Testing
Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp
LEDs and details of Cree’s pre-release qualification testing for XLamp LEDs.
Lumen Maintenance
Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance.
For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document.
Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting.
Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect
the LED junction temperature.
Moisture Sensitivity
Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering.
Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp XT-E HVW LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life
in conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered LEDs
in the original MBP.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product
Documentation sections of www.cree.com.
REACh Compliance
REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA)
has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to
insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available
upon request.
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
29
XLamp ® XT-E HVW LED
Notes - Continued
UL® Recognized Component
Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/
UL 8750.
Vision Advisory
WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please
refer to the LED Eye Safety application note.
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
30
XLamp ® XT-E HVW LED
6
5
6
4
5
NOTICE
NOTICE
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
CONTAINED WITHIN ARE THE PROPRIETARY AND
CONTAINED
WITHIN ARE THE PROPRIETARY AND
CONFIDENTIAL INFORMATION OF CREE, INC. THIS
PLOT
CONFIDENTIAL
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED
TO ANY INFORMATION OF CREE, INC. THIS PLOT
NOT CONSENT
BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON WITHOUT
THE MAY
WRITTEN
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
OF CREE INC.
OF CREE INC.
3
4
2
3
REV
Mechanical Dimensions
Thermal vias, if present, are not shown on these drawings.
All measurements are ±.13 mm unless
otherwise indicated.
3.30
3.30
D
D
2.36
3.45
6
6
.76
.76
5
5
4
D
D
.50
3
3
2
3.30
3.45
3.45
.50
REV
2
3
C
C
2.30
REV
3
4
.50
2.30
4
4
NOTICE
CREENOTICE
CONFIDENTIAL. THIS PLOT AND THE INFORMATION
CREE CONFIDENTIAL.
THIS PLOT WITHIN
AND THE
INFORMATION
CONTAINED
ARE
THE PROPRIETARY AND
CONTAINED WITHINCONFIDENTIAL
ARE THE PROPRIETARY
AND OF CREE, INC. THIS PLOT
INFORMATION
CONFIDENTIAL INFORMATION
OFCOPIED,
CREE, INC.
THIS PLOT OR DISCLOSED TO ANY
MAY NOT BE
REPRODUCED
MAY NOT BE COPIED,
REPRODUCED OR
DISCLOSED
TO ANY 3.45
UNAUTHORIZED
PERSON
WITHOUT
THE WRITTEN CONSENT
OF CREE
INC.
UNAUTHORIZED3.45
PERSON
WITHOUT
THE WRITTEN CONSENT
OF CREE INC.
5
.50
2.36
3.45
2.36
REV
DESCRIPTION
REV
R1.53
.76
2.36
1
REVISONS
BY
R1.53
.76DESCRIPTION
.65
Top View
3.30
3.30
1
2
REVISONS
DATE
APP'D
BY
1.302.30
.65
Side View
.50
.50
2.30
APP'D
DATE
1.30
.50
.50
PRIMARY
PRIMARY
3.30
2.36
2.36
3.45
.76
3.30
.50
2.30
3.45
.76
3.30 REF.
.50
3.30 REF.
D
D
2.30
.50
3.30
3.30
.50
.50
.50
.50
.50
.64
.50
.64
.50
C
C
B
3.30
B
R1.53
R1.53
3.30
3.30
ANODE
3.30
.65
1.30
3.30 REF.
3.30
ANODE
3.30
1.30
3.30 REF.
.65
C
.25PRIMARY
.25
PRIMARY
C
.75
1.30
R1.53
.65
A
.50
PRIMARY
.50
3.30
.75
1.30
12‑V, 24‑V
.65 & 48‑V Bottom View
1.30
1.30
3.30
PRIMARY
.50
A
.50
1.01
RECOMMENDED PCB SOLDER PAD
1.01
ALTENATIVE
.50
.50
RECOMMENDED PCB SOLDER PAD
B
B
12‑V & 24‑V Alternate Bottom View
A
2.30
3.30
ALTENATIVE
.64
2.30
3.30
ALL DIMENSIONS ARE UNLESS±OTHER
.1
.64
X°
THIRD ANGLE PROJECTION
.50
1.01
3.30
.64
3.30
.64
.50
6
6
3.30
5
3.30
5
B
4
.25
.25
3.30
3.30
1.30
3.30
1.30
1.01
1.01
.25
DAT
FOR SHEET MET
.X
.XX
.XX
X°
--
SURFACE FINI
3
FINAL PROTECTIVE FINISH
-2
ALL DIMEN
ALL DIMENSIONS ARE
2.30
3.30
2.30
3.30
MATERIAL
B
.75
.75
--
1.6
SURFACE FINISH:
3
APPROVED
.5 °
FOR SHEET METAL PARTS ONLY
.X
±
1.5
.XX
±
.75
.XXX ±
.25
X°
±
.5 °
.25
4
±
DIMENSIO
MILLIMETERS DAT
AN
TOLERANCE UN
D. CRONIN
8
.XX
CHECK
DAT
.XX
X°
-DRAWN BY
UNLESS OTHERWISE SPECIFIED
RECOMMENDED STENCIL PATTERN DIMENSIONS ARE IN
(HATCHED AREA IS OPENING) MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
RECOMMENDED STENCIL PATTERN
THIRD ANGLE PROJECTION
.XX
±
.25
.XXX ±
.125
(HATCHED AREA IS OPENING)
UNLESS OTHERWISE
SPECIFIED
DRAWN BY
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN
D. CRONIN
DIMENSIONS ARE INMILLIMETERS AND AFTER
FINISH.
CHECK
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS
SPECIFIED:
.75
TOLERANCE UNLESS SPECIFIED:
.XX
± -- .25
RECOMMENDED PCB SOLDER PAD
.XX
±
.25
.XXXAPPROVED
±
.125
RECOMMENDED PCB SOLDER PAD
X°
±
.5 °
.XXX ±
.125
(HATCHED AREA IS OPENING)
-THIRD ANGLE PROJECTION
X°
±
.5 °
FOR SHEET METAL PARTS ONLY
THIRD ANGLE PROJECTION
®
®
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information inALL
thisDIMENSIONS
document is subject
notice.
Cree and
XLamp are registered trademarks and the Cree
logo
a trademark
FOR
SHEETis
METAL
PARTS ONLY of .X MATERIAL
ARE to±change
.13MMwithout
UNLESS
OTHERWISE
NOTED
±
1.5
.XX
±
.75
.X
±
1.5
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
2.30 1.01
.XX
±
.75
.XXX ±
.25
ALL DIMENSIONS ARE
± .13MM UNLESS OTHERWISE NOTED
DATE
DRAWN BY
X° FINAL±PROTECTIVE
.5 FINISH
°
.XXX ±
.25
UNLESS OTHERWISE SPECIFIED
3.30
2.30
4600
Silicon
Drive
X°
±
.5
°
D. CRONIN
8/1/11
1.6
DIMENSIONS ARE IN
SURFACE FINISH:
A
A
Recommended Stencil Pattern
RECOMMENDED STENCIL PATTERN
(Shaded
Area Is Open)
RECOMMENDED(HATCHED
STENCIL
PATTERN
AREA IS OPENING)
.75
Recommended
PCB Solder Pad
-
RECOMMENDED STENCIL PATTERN
6
3.30
6
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
.XX
± 5 .25
CHECK
DATE
UNLESS OTHERWISE
SPECIFIED
5-- DIMENSIONS ARE
-- IN
MILLIMETERS ANDDATE
AFTER FINISH.
APPROVED
DRAWN BY
D. CRONIN
CHECK
4
Durham, N.C 27703
DATE
8/1/11
DATE
4
SURFACE FINISH:
Phone (919) 313-5300
Fax (919) 313-5558
A
3
4600 Silicon Drive
Durham, N.C 27703
3
1.6
31
-
2
REF
REF
4.375
R
Ao
4
2.2
P2
2.0 ±0.05 (I)
±0.
0
Po
4.0 ±0.1 (II)
CATHODE SIDE
Y
5
F(III)
SECTION X-X
REF
4.375
X
X
3.70
REF
R
2.2
P1
+/- 0.1
+0.0/-0.1
+/- 0.05
(III)
Ao
4
+/- 0.1
3.70
2.40
5.50
8.00
12.00
(II)
ANODE SIDE
+/- 0.1
+0.0/-0.1
5
+/- 0.05
Y
3.70
Bo
Ko
F
(I)
+/- 0.1
3.70
D1
2.40
1.5 MIN.
SECTION Y-Y
5.50
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
CONTAINED WITHIN ARE THE PROPRIETARY AND
CONFIDENTIAL INFORMATIONPOF1CREE, INC. THIS PLOT 8.00
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT
OF CREE INC.
W
12.00
Bo
Ko
6
NOTICE F
Ao
P1
W
W
Bo
Ao
R0.2
TYPICAL
Ko
All dimensions in mm.
E1
1.75 ±0.1
Do
Y
D1
1.5 MIN.
REF
Y
P1
D1
All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard.
1.5
MIN.
SECTION Y-Y
REF 0.59
5
RE
R0.2
TYPICAL
Ko
X
SECTION Y-Y
R0.2
Tape and Reel TYPICAL
Ko
1.5
F(III)
Bo
XLamp ® XT-E HVW LED
Bo
X
T 0.30 ±0.05
4.375
3
4
REF 0.59
2
(IV)
REV
+/- 0.1
+0.3/-0.1
+/- 0.1
+0.3/-0.1
Measured from centerline of sprocket hole
to centerline of pocket.
Cumulative tolerance of 10 sprocket
holes is ± 0.20.
Measured from centerline of sprocket
hole to centerline of pocket.
REVISONS
Other material available.
BY
1
DATE
DESCRIPTION
ADDED CATHODE AND ANODE NOTE
REORIENTED DEVICE
B
DC
APP'D
2/26/12
SECTION X-X
D
(I)
Ao
3.70
+/- 0.1
3.70
+/- 0.1
2.40
+0.0/-0.1
5.50
+/- 0.05
END
6
8.00
P1
+/- 0.1
NOTICE
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
W WITHIN ARE THE PROPRIETARY
12.00 AND
+0.3/-0.1
CONTAINED
Measured from centerline of sprocket hole
to centerline of pocket.
Cumulative tolerance of 10 sprocket
User Feed Direction
holes is ± 0.20.
(III)
Measured from centerline of sprocket
hole to centerline of pocket.
CATHODE(IV)SIDEOther material available.
START
(II)
1.5± .1
Bo
Ko
F
8±.1
5
4
3
ÓÉ Foxit PDF Editor ±à¼°æȨËùÓÐ (c) by Foxit Software Company, 2004
½öÓÃÓÚÆÀ¹À¡£
4±.1
2.5±.1
1.75
±.10
2
1
12.0
+.3
-.0
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
OF CREE, INC.
C
ANODE SIDE
D
Trailer
160mm (min) of
empty pockets
sealed with tape
(20 pockets min.)
6
NOTICE
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
CONTAINED WITHIN ARE THE PROPRIETARY AND
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
Ø190
OF CREE, INC.
Leader
400mm (min.) of
empty pockets with
at least 100mm
3
ÓÉ Foxit PDF Editor ±à¼sealed by tape
°æȨËùÓÐ (c) by Foxit Software Company, 2004
½öÓÃÓÚÆÀ¹À¡£
(50 empty pockets min.)
Loaded Pockets
(1000 Lamps)
5
4
D
2
1
16.40
User Feed Direction
D
D
C
CB
Carrier Tape
16.40
Ø190
Pocket Tape
OD
C
7"
7.5
''
13mm
Ø61 ± 0.5
C
12.40 +2.00
0
MEASURED AT HUB
A
B
Ø13
THIRD ANGLE PROJECTION
6
5
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
.XX ±
.25
.XXX ±
.125
X°
±
.5 °
FOR SHEET
Ø61
± 0.5METAL PARTS ONLY
.X
±
.XX ±
.XXX ±
X°
±
12.40
OD
7.5 MEASURED AT INSIDE EDGE
4
12.40 +2.00
''
0
MEASURED AT HUB
SURFACE FINISH:
1.5
.75
.25
.5 °
DATE
DRAWN BY
D. CRONIN
CHECK
B
11/29/10
4600 Silicon Drive
Durham, N.C 27703
DATE
--
Phone (919) 313-5300
--
Fax (919) 313-5558
DATE
APPROVED
--
TITLE
--
XP HEW LOADING SPEC
MATERIAL
--
SIZE
FINAL PROTECTIVE FINISH
--
1.6
3
2402-00014
SHEET
3.000
2
1
B
B
UNLESS OTHERWISE SPECIFIED
®
DIMENSIONS ARE IN
MILLIMETERS & BEFORE FINISH.
TOLERANCE UNLESS SPECIFIED:
.X ± 0.3
.XX ± .13
DRAWN BY
DATE
A
Copyright
© 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and XLamp are registered trademarks and the Cree logo is a trademark of
Ø13
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
THIRD ANGLE PROJECTION
12.40
MEASURED AT INSIDE EDGE
X°
± 1°
FOR SHEET METAL PARTS ONLY
.X ± .25
.XX ± .10
X°
± 2°
®
LIUDEZHI
2012/5/25
CHECK
DATE
APPROVED
DATE
4600 Silicon Drive
Durham, N.C 27703
Phone (919) 361-4770
A
TITLE
Reel,
MATERIAL
PS
SIZE
FINAL PROTECTIVE FINISH
SCALE
C
1:2
32
7" x 12mm Wide
DRAWING NO.
2400-00005
REV.
B
SHEET 1 OF 1
REV.
DRAWING NO.
C
SCALE
B
OF
1 /1
XLamp ® XT-E HVW LED
Packaging
Unpackaged Reel
Vacuum-Sealed
Vacuum-Sealed
Moisture
Barrier Bag
Moisture Barrier Bag
Label
CREE
Binwith
Code Cree Bin
&
Barcode
LabelLot #
Code,
Qty,
Label with Cree Bin Code,
Quantity, Reel ID
Label
with
Cree Bin
Label with
Customer
P/N, Qty,Qty,
Lot #, Lot
PO # #
Code,
Packaged Reel
Patent Label
Label with Customer Order
Label
with Cree Order Code,
Code, Qty, Reel ID, PO #
Quantity, Reel ID, PO #
Label with Cree Bin Code,
Quantity, Reel ID
Boxed Reel
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Bin Code,
Quantity, Reel ID
Patent Label
(on bottom of box)
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
33