XLampXPG2

CLD-DS51 Rev 12C
Product family data sheet
Cree® XLamp® XP-G2 LEDs
Product Description
FEATURES
Table of Contents
The XLamp® XP-G2 LED builds on the • Available in white, outdoor white and
Characteristics.............................................2
unprecedented
Flux Characteristics.....................................3
performance
of
the
80-, 85- and 90-CRI white
original XP-G by increasing lumen output • ANSI-compatible chromaticity bins
Relative Spectral Power Distribution....... 10
up to 20% while providing a single die LED • Binned at 85 °C
Relative Flux vs. Junction Temperature... 10
point source for precise optical control. • Maximum drive current: 1500 mA
Electrical Characteristics.......................... 11
The XP-G2 LED shares the same footprint • Low thermal resistance: 4 °C/W
Relative Flux vs. Current........................... 11
as the original XP-G, providing a seamless • Wide viewing angle: 115°
Relative Chromaticity vs Current and
upgrade path and shortening the design • Unlimited floor life at
Temperature.............................................. 12
cycle.
Typical Spatial Distribution....................... 13
≤ 30 ºC/85% RH
• Reflow solderable - JEDEC J‑STD‑020C
Thermal Design......................................... 13
XLamp XP-G2 LEDs are the ideal choice • Electrically neutral thermal path
Performance Groups – Luminous Flux... 14
for lighting applications where high • RoHS and REACh compliant
Performance Groups – Chromaticity....... 15
light output and maximum efficacy are • UL recognized component (E349212)
Cree’s Standard Chromaticity Regions
required, such as LED light bulbs, outdoor
Plotted on the 1931 CIE Curve................. 18
lighting, portable lighting, indoor lighting
Cree’s Standard Cool White Kits Plotted
and solar-powered lighting.
on ANSI Standard Chromaticity
®
Regions...................................................... 20
Cree’s Standard Warm and Neutral
White Kits Plotted on ANSI Standard
Chromaticity Regions............................... 21
Cree’s Standard Chromaticity Kits........... 23
www.cree.com/Xlamp
Bin and Order Code Formats.................... 24
Reflow Soldering Characteristics............. 25
Notes......................................................... 26
Mechanical Dimensions........................... 28
Tape and Reel............................................ 29
Packaging.................................................. 30
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are
registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
1
XLamp ® XP-G2 LED
Characteristics
Characteristics
Unit
Thermal resistance, junction to solder point
°C/W
4
degrees
115
mV/°C
-1.8
Viewing angle (FWHM)
Temperature coefficient of voltage
ESD withstand voltage (HBM per Mil-Std-883D)
Minimum
Typical
Maximum
V
8000
mA
1500
Reverse voltage
V
5
Forward voltage (@ 350 mA, 85 °C)
V
2.8
Forward voltage (@ 700 mA, 85 °C)
V
2.9
Forward voltage (@ 1000 mA, 85 °C)
V
3.0
Forward voltage (@ 1500 mA, 85 °C)
V
3.1
LED junction temperature
°C
DC forward current
3.15
150
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
2
XLamp ® XP-G2 LED
Flux Characteristics (TJ = 85 °C)
The following table provides order codes for XLamp XP-G LEDs. For a complete description of the order code nomenclature, please see
the Bin and Order Code Formats section (page 24). For definitions of the chromaticity kits, please see the Cree’s Standard Chromaticity
Kits section (page 23).
Chromaticity
Minimum Luminous Flux (lm)
@ 350 mA
Order Codes
Kit
Code
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
70 CRI Typical
S4
164
180
XPGBWT-L1-0000-00L51
S3
156
171
XPGBWT-L1-0000-00K51
S2
148
163
XPGBWT-L1-0000-00J51
R5
139
153
XPGBWT-L1-0000-00H51
R4
130
143
XPGBWT-L1-0000-00G51
R3
122
134
XPGBWT-L1-0000-00F51
S4
164
180
XPGBWT-L1-0000-00L53
S3
156
171
XPGBWT-L1-0000-00K53
S2
148
163
XPGBWT-L1-0000-00J53
R5
139
153
XPGBWT-L1-0000-00H53
R4
130
143
XPGBWT-L1-0000-00G53
R3
122
134
XPGBWT-L1-0000-00F53
S4
164
180
XPGBWT-L1-0000-00L50
S3
156
171
XPGBWT-L1-0000-00K50
S2
148
163
XPGBWT-L1-0000-00J50
R5
139
153
XPGBWT-L1-0000-00H50
R4
130
143
XPGBWT-L1-0000-00G50
R3
122
134
XPGBWT-L1-0000-00F50
S4
164
180
XPGBWT-L1-0000-00LE1
S3
156
171
XPGBWT-L1-0000-00KE1
S2
148
163
XPGBWT-L1-0000-00JE1
R5
139
153
XPGBWT-L1-0000-00HE1
R4
130
143
XPGBWT-L1-0000-00GE1
R3
122
134
XPGBWT-L1-0000-00FE1
51
53
50
E1
CCT
6200 K
6000 K
6200 K
6500 K
Notes
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 26).
• Cree XLamp XP-G2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
3
XLamp ® XP-G2 LED
Flux Characteristics (TJ = 85 °C) - Continued
Chromaticity
Minimum Luminous Flux (lm)
@ 350 mA
Order Codes
Kit
Code
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
70 CRI Typical
S4
164
180
XPGBWT-L1-0000-00LE2
S3
156
171
XPGBWT-L1-0000-00KE2
S2
148
163
XPGBWT-L1-0000-00JE2
R5
139
153
XPGBWT-L1-0000-00HE2
R4
130
143
XPGBWT-L1-0000-00GE2
R3
122
134
XPGBWT-L1-0000-00FE2
E2
CCT
5700 K
Chromaticity
Minimum Luminous Flux (lm)
@ 350 mA
Kit
Code
Flux (lm)
@ 85 °C
Flux (lm)
@25 °C*
70 CRI Typical
S4
164
180
XPGBWT-01-0000-00LE3
S3
156
171
XPGBWT-01-0000-00KE3
S2
148
163
XPGBWT-01-0000-00JE3
XPGBWT-L1-0000-00JE3
R5
139
153
XPGBWT-01-0000-00HE3
XPGBWT-L1-0000-00HE3
R4
130
143
XPGBWT-01-0000-00GE3
XPGBWT-L1-0000-00GE3
R3
122
134
XPGBWT-01-0000-00FE3
XPGBWT-L1-0000-00FE3
R2
114
125
XPGBWT-01-0000-00EE3
XPGBWT-L1-0000-00EE3
Q5
107
118
S4
164
180
XPGBWT-01-0000-00LF4
S3
156
171
XPGBWT-01-0000-00KF4
S2
148
163
XPGBWT-01-0000-00JF4
XPGBWT-L1-0000-00JF4
R5
139
153
XPGBWT-01-0000-00HF4
XPGBWT-L1-0000-00HF4
R4
130
143
XPGBWT-01-0000-00GF4
XPGBWT-L1-0000-00GF4
R3
122
134
XPGBWT-01-0000-00FF4
XPGBWT-L1-0000-00FF4
R2
114
125
XPGBWT-01-0000-00EF4
XPGBWT-L1-0000-00EF4
Q5
107
118
E3
F4
CCT
5000 K
4750 K
Order Codes
75 CRI Typical
80 CRI Minimum
XPGBWT-L1-0000-00DE3
XPGBWT-L1-0000-00DF4
Notes
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 26).
• Cree XLamp XP-G2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
4
XLamp ® XP-G2 LED
Flux Characteristics (TJ = 85 °C) - Continued
Chromaticity
Minimum Luminous Flux (lm)
@ 350 mA
Kit
Code
Flux (lm)
@ 85 °C
Flux (lm)
@25 °C*
70 CRI Typical
S4
164
180
XPGBWT-01-0000-00LE4
S3
156
171
XPGBWT-01-0000-00KE4
S2
148
163
XPGBWT-01-0000-00JE4
XPGBWT-L1-0000-00JE4
R5
139
153
XPGBWT-01-0000-00HE4
XPGBWT-L1-0000-00HE4
R4
130
143
XPGBWT-01-0000-00GE4
XPGBWT-L1-0000-00GE4
R3
122
134
XPGBWT-01-0000-00FE4
XPGBWT-L1-0000-00FE4
R2
114
125
XPGBWT-01-0000-00EE4
XPGBWT-L1-0000-00EE4
Q5
107
118
S4
164
180
XPGBWT-01-0000-00LF5
S3
156
171
XPGBWT-01-0000-00KF5
S2
148
163
XPGBWT-01-0000-00JF5
XPGBWT-L1-0000-00JF5
R5
139
153
XPGBWT-01-0000-00HF5
XPGBWT-L1-0000-00HF5
R4
130
143
XPGBWT-01-0000-00GF5
XPGBWT-L1-0000-00GF5
R3
122
134
XPGBWT-01-0000-00FF5
XPGBWT-L1-0000-00FF5
R2
114
125
XPGBWT-01-0000-00EF5
XPGBWT-L1-0000-00EF5
Q5
107
118
S4
164
180
XPGBWT-01-0000-00LE5
S3
156
171
XPGBWT-01-0000-00KE5
S2
148
163
XPGBWT-01-0000-00JE5
XPGBWT-L1-0000-00JE5
R5
139
153
XPGBWT-01-0000-00HE5
XPGBWT-L1-0000-00HE5
XPGBWT-H1-0000-00HE5
R4
130
143
XPGBWT-01-0000-00GE5
XPGBWT-L1-0000-00GE5
XPGBWT-H1-0000-00GE5
R3
122
134
XPGBWT-01-0000-00FE5
XPGBWT-L1-0000-00FE5
XPGBWT-H1-0000-00FE5
R2
114
125
XPGBWT-01-0000-00EE5
XPGBWT-L1-0000-00EE5
XPGBWT-H1-0000-00EE5
Q5
107
118
XPGBWT-L1-0000-00DE5
XPGBWT-H1-0000-00DE5
R5
139
153
XPGBWT-L1-0000-00HZ5
XPGBWT-H1-0000-00HZ5
R4
130
143
XPGBWT-L1-0000-00GZ5
XPGBWT-H1-0000-00GZ5
R3
122
134
XPGBWT-L1-0000-00FZ5
XPGBWT-H1-0000-00FZ5
R2
114
125
XPGBWT-L1-0000-00EZ5
XPGBWT-H1-0000-00EZ5
Q5
107
118
XPGBWT-L1-0000-00DZ5
XPGBWT-H1-0000-00DZ5
E4
F5
E5
Z5
CCT
4500 K
4250 K
4000 K
4000 K
Order Codes
75 CRI Typical
80 CRI Minimum
XPGBWT-L1-0000-00DE4
XPGBWT-L1-0000-00DF5
Notes
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 26).
• Cree XLamp XP-G2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
5
XLamp ® XP-G2 LED
Flux Characteristics (TJ = 85 °C) - Continued
Chromaticity
Minimum Luminous Flux (lm)
@ 350 mA
Kit
Code
Flux (lm)
@ 85 °C
Flux (lm)
@25 °C*
70 CRI Typical
S2
148
163
XPGBWT-01-000000JF6
R5
139
153
R4
130
R3
F6
E6
Z6
CCT
Order Codes
80 CRI Typical
80 CRI Minimum
XPGBWT-01-000000HF6
XPGBWT-L1-000000HF6
XPGBWT-H1-000000HF6
143
XPGBWT-01-000000GF6
XPGBWT-L1-000000GF6
XPGBWT-H1-000000GF6
122
134
XPGBWT-01-000000FF6
XPGBWT-L1-000000FF6
XPGBWT-H1-000000FF6
R2
114
125
XPGBWT-01-000000EF6
XPGBWT-L1-000000EF6
XPGBWT-H1-000000EF6
Q5
107
118
XPGBWT-01-000000DF6
XPGBWT-L1-000000DF6
XPGBWT-H1-000000DF6
S2
148
163
XPGBWT-01-000000JE6
R5
139
153
XPGBWT-01-000000HE6
XPGBWT-L1-000000HE6
XPGBWT-H1-000000HE6
R4
130
143
XPGBWT-01-000000GE6
XPGBWT-L1-000000GE6
XPGBWT-H1-000000GE6
R3
122
134
XPGBWT-01-000000FE6
XPGBWT-L1-000000FE6
XPGBWT-H1-000000FE6
R2
114
125
XPGBWT-01-000000EE6
XPGBWT-L1-000000EE6
XPGBWT-H1-000000EE6
Q5
107
118
XPGBWT-01-000000DE6
XPGBWT-L1-000000DE6
XPGBWT-H1-000000DE6
R4
130
143
XPGBWT-L1-000000GZ6
XPGBWT-H1-000000GZ6
R3
122
134
XPGBWT-L1-000000FZ6
XPGBWT-H1-000000FZ6
R2
114
125
XPGBWT-L1-000000EZ6
XPGBWT-H1-000000EZ6
Q5
107
118
XPGBWT-L1-000000DZ6
XPGBWT-H1-000000DZ6
3750 K
3500 K
3500 K
85 CRI Minimum
90 CRI Minimum
Notes
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 26).
• Cree XLamp XP-G2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
6
XLamp ® XP-G2 LED
Flux Characteristics (TJ = 85 °C) - Continued
Chromaticity
Minimum Luminous Flux (lm)
@ 350 mA
Kit
Code
Flux (lm)
@ 85 °C
Flux (lm)
@25 °C*
70 CRI Typical
S2
148
163
XPGBWT-01-000000JF7
R5
139
153
R4
130
R3
F7
E7
CCT
80 CRI Typical
80 CRI Minimum
85 CRI Minimum
90 CRI Minimum
XPGBWT-01-000000HF7
XPGBWT-L1-000000HF7
XPGBWT-H1-000000HF7
143
XPGBWT-01-000000GF7
XPGBWT-L1-000000GF7
XPGBWT-H1-000000GF7
122
134
XPGBWT-01-000000FF7
XPGBWT-L1-000000FF7
XPGBWT-H1-000000FF7
R2
114
125
XPGBWT-01-000000EF7
XPGBWT-L1-000000EF7
XPGBWT-H1-000000EF7
Q5
107
118
XPGBWT-L1-000000DF7
XPGBWT-H1-000000DF7
S2
148
163
XPGBWT-01-000000JE7
R5
139
153
XPGBWT-01-000000HE7
XPGBWT-L1-000000HE7
XPGBWT-H1-000000HE7
R4
130
143
XPGBWT-01-000000GE7
XPGBWT-L1-000000GE7
XPGBWT-H1-000000GE7
R3
122
134
XPGBWT-01-000000FE7
XPGBWT-L1-000000FE7
XPGBWT-H1-000000FE7
R2
114
125
XPGBWT-01-000000EE7
XPGBWT-L1-000000EE7
XPGBWT-H1-000000EE7
XPGBWT-P1-000000EE7
XPGBWT-U1-000000EE7
Q5
107
118
XPGBWT-L1-000000DE7
XPGBWT-H1-000000DE7
XPGBWT-P1-000000DE7
XPGBWT-U1-000000DE7
Q4
100
110
XPGBWT-L1-000000CE7
XPGBWT-H1-000000CE7
XPGBWT-P1-000000CE7
XPGBWT-U1-000000CE7
Q3
93.9
103
XPGBWT-P1-000000BE7
XPGBWT-U1-000000BE7
Q2
87.4
96.1
XPGBWT-P1-000000AE7
XPGBWT-U1-000000AE7
P4
80.6
88.6
XPGBWT-P1-0000009E7
XPGBWT-U1-0000009E7
P3
73.9
81.2
XPGBWT-P1-0000008E7
XPGBWT-U1-0000008E7
3250 K
3000 K
Order Codes
Notes
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 26).
• Cree XLamp XP-G2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
7
XLamp ® XP-G2 LED
Flux Characteristics (TJ = 85 °C) - Continued
Chromaticity
Minimum Luminous Flux (lm)
@ 350 mA
Kit
Code
Flux (lm)
@ 85 °C
Flux (lm)
@25 °C*
R4
130
R3
Z7
F8
CCT
3000 K
Order Codes
80 CRI Typical
80 CRI Minimum
85 CRI Minimum
90 CRI Minimum
143
XPGBWT-L1-000000GZ7
XPGBWT-H1-000000GZ7
122
134
XPGBWT-L1-000000FZ7
XPGBWT-H1-000000FZ7
R2
114
125
XPGBWT-L1-000000EZ7
XPGBWT-H1-000000EZ7
Q5
107
118
XPGBWT-L1-000000DZ7
XPGBWT-H1-000000DZ7
XPGBWT-P1-000000DZ7
XPGBWT-U1-000000DZ7
Q4
100
110
XPGBWT-L1-000000CZ7
XPGBWT-H1-000000CZ7
XPGBWT-P1-000000CZ7
XPGBWT-U1-000000CZ7
Q3
93.9
103
XPGBWT-P1-000000BZ7
XPGBWT-U1-000000BZ7
Q2
87.4
96.1
XPGBWT-P1-000000AZ7
XPGBWT-U1-000000AZ7
P4
80.6
88.6
XPGBWT-P1-0000009Z7
XPGBWT-U1-0000009Z7
P3
73.9
81.2
XPGBWT-P1-0000008Z7
XPGBWT-U1-0000008Z7
R4
130
143
XPGBWT-L1-000000GF8
XPGBWT-H1-000000GF8
R3
122
134
XPGBWT-L1-000000FF8
XPGBWT-H1-000000FF8
R2
114
125
XPGBWT-L1-000000EF8
XPGBWT-H1-000000EF8
Q5
107
118
XPGBWT-L1-000000DF8
XPGBWT-H1-000000DF8
XPGBWT-P1-000000DF8
XPGBWT-U1-000000DF8
Q4
100
110
XPGBWT-L1-000000CF8
XPGBWT-H1-000000CF8
XPGBWT-P1-000000CF8
XPGBWT-U1-000000CF8
Q3
93.9
103
XPGBWT-L1-000000BF8
XPGBWT-H1-000000BF8
XPGBWT-P1-000000BF8
XPGBWT-U1-000000BF8
Q2
87.4
96.1
XPGBWT-P1-000000AF8
XPGBWT-U1-000000AF8
P4
80.6
88.6
XPGBWT-P1-0000009F8
XPGBWT-U1-0000009F8
P3
73.9
81.2
XPGBWT-P1-0000008F8
XPGBWT-U1-0000008F8
P2
67.2
73.9
XPGBWT-P1-0000007F8
XPGBWT-U1-0000007F8
2850 K
70 CRI Typical
Notes
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 26).
• Cree XLamp XP-G2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
8
XLamp ® XP-G2 LED
Flux Characteristics (TJ = 85 °C) - Continued
Chromaticity
Minimum Luminous Flux (lm)
@ 350 mA
Kit
Code
Flux (lm)
@ 85 °C
Flux (lm)
@25 °C*
R4
130
R3
E8
Z8
CCT
80 CRI Typical
80 CRI Minimum
85 CRI Minimum
90 CRI Minimum
143
XPGBWT-L1-000000GE8
XPGBWT-H1-000000GE8
122
134
XPGBWT-L1-000000FE8
XPGBWT-H1-000000FE8
R2
114
125
XPGBWT-L1-000000EE8
XPGBWT-H1-000000EE8
Q5
107
118
XPGBWT-L1-000000DE8
XPGBWT-H1-000000DE8
Q4
100
110
XPGBWT-L1-000000CE8
XPGBWT-H1-000000CE8
XPGBWT-P1-000000CE8
XPGBWT-U1-000000CE8
Q3
93.9
103
XPGBWT-L1-000000BE8
XPGBWT-H1-000000BE8
XPGBWT-P1-000000BE8
XPGBWT-U1-000000BE8
Q2
87.4
96.1
XPGBWT-P1-000000AE8
XPGBWT-U1-000000AE8
P4
80.6
88.6
XPGBWT-P1-0000009E8
XPGBWT-U1-0000009E8
P3
73.9
81.2
XPGBWT-P1-0000008E8
XPGBWT-U1-0000008E8
P2
67.2
73.9
XPGBWT-P1-0000007E8
XPGBWT-U1-0000007E8
R3
122
134
XPGBWT-L1-000000FZ8
XPGBWT-H1-000000FZ8
R2
114
125
XPGBWT-L1-000000EZ8
XPGBWT-H1-000000EZ8
Q5
107
118
XPGBWT-L1-000000DZ8
XPGBWT-H1-000000DZ8
Q4
100
110
XPGBWT-L1-000000CZ8
XPGBWT-H1-000000CZ8
Q3
93.9
103
XPGBWT-L1-000000BZ8
XPGBWT-H1-000000BZ8
XPGBWT-P1-000000BZ8
XPGBWT-U1-000000BZ8
Q2
87.4
96.1
XPGBWT-P1-000000AZ8
XPGBWT-U1-000000AZ8
P4
80.6
88.6
XPGBWT-P1-0000009Z8
XPGBWT-U1-0000009Z8
P3
73.9
81.2
XPGBWT-P1-0000008Z8
XPGBWT-U1-0000008Z8
P2
67.2
73.9
XPGBWT-P1-0000007Z8
XPGBWT-U1-0000007Z8
2700 K
2700 K
Order Codes
70 CRI Typical
Notes
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 26).
• Cree XLamp XP-G2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
9
XLamp ® XP-G2 LED
Relative Spectral Power
Relative Spectral Power Distribution
100%
Relative Radiant Power
80%
60%
5000 K - 8300 K CCT
3700 K - 5000 K CCT
40%
2600 K - 3700 K CCT
20%
0%
380
430
480
530
580
630
680
730
780
Wavelength (nm)
Relative Flux Output vs. Junction Temperature
Relative Flux vs. Junction Temperature (IF = 350 mA)
120%
Relative Luminous Flux
100%
80%
60%
40%
20%
0%
25
50
75
100
125
150
Junction Temperature (ºC)
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
10
XLamp ® XP-G2 LED
Electrical Characteristics (Tj = 25ºC)
Electrical Characteristics (TJ = 85 °C)
1500
Forward Current (mA)
1250
1000
750
500
250
0
2.65
2.75
2.85
2.95
3.05
3.15
Forward Voltage (V)
Relative Intensity vs. Current (Tj = 25ºC)
Relative Flux vs. Current (TJ = 85 °C)
350%
Relative Luminous Flux
300%
250%
200%
150%
100%
50%
0%
0
250
500
750
1000
1250
1500
Forward Current (mA)
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
11
XLamp ® XP-G2 LED
Delta CCT vs. Current
Relative Chromaticity vs Current and Temperature (Warm White*)
0.020
0.015
0.010
0.005
ΔCCx
0.000
ΔCCy
-0.005
-0.010
Delta
-0.015 CCT vs Temp
-0.020
100
300
500
700
900
1100
1300
1500
Current (mA)
0.020
0.015
0.010
0.005
ΔCCx
0.000
ΔCCy
-0.005
-0.010
-0.015
-0.020
25
50
75
100
125
150
Tsp (°C)
* Warm White XLamp XP-G2 LEDs have a typical CRI of 80.
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
12
XLamp ® XP-G2 LED
Typical Spatial Radiation Pattern
Typical Spatial Distribution
100%
Relative Luminous Intensity
80%
60%
40%
20%
-100
-80
-60
-40
-20
0%
0
20
40
60
80
100
Angle (º)
Thermal Design
Thermal Design
Cool
White forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end
The maximum
product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life
and optical characteristics.
1600
Maximum Current (mA)
1400
1200
1000
800
600
Rj-a = 10°C/W
400
Rj-a = 15°C/W
Rj-a = 20°C/W
200
0
Rj-a = 25°C/W
0
20
40
60
80
100
120
140
160
Ambient Temperature (ºC)
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
13
XLamp ® XP-G2 LED
Performance Groups – Luminous Flux
XLamp XP-G2 LEDs are tested for luminous flux and placed into one of the following luminous‑flux groups:
Group Code
Minimum Luminous Flux
(lm) @ 350 mA
Maximum Luminous Flux
(lm) @ 350 mA
P2
67.2
73.9
P3
73.9
80.6
P4
80.6
87.4
Q2
87.4
93.9
Q3
93.9
100
Q4
100
107
Q5
107
114
R2
114
122
R3
122
130
R4
130
139
R5
139
148
S2
148
156
S3
156
164
S4
164
172
S5
172
182
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
14
XLamp ® XP-G2 LED
Performance Groups – Chromaticity
Region
0A
0R
1A
1R
2A
2R
3A
4A
4R
x
y
0.2950
0.2970
0.2920
0.3060
0.2984
0.3133
0.3009
Region
x
y
0.2920
0.3060
x
y
0.2984
0.3133
x
y
0.2984
0.3133
0.2895
0.3135
0.2962
0.3220
0.3048
0.3207
0.2962
0.3220
0.3028
0.3304
0.3068
0.3113
0.3042
0.2984
0.3133
0.3048
0.3207
0.3009
0.3042
0.2980
0.2880
0.2895
0.3135
0.2962
0.3220
0.3037
0.2937
0.2950
0.2970
0.2870
0.3210
0.2937
0.3312
0.3009
0.3042
0.3009
0.3042
0.2937
0.3312
0.3005
0.3415
0.3068
0.3113
0.3037
0.2937
0.2962
0.3220
0.3028
0.3304
0.3093
0.2993
0.3048
0.3207
0.3028
0.3304
0.3115
0.3391
0.3130
0.3290
0.3130
0.3290
0.3115
0.3391
0.3205
0.3481
0.3213
0.3373
0.3144
0.3186
0.3130
0.3290
0.3213
0.3373
0.3221
0.3261
0.3068
0.3113
0.3048
0.3207
0.3130
0.3290
0.3144
0.3186
0.3068
0.3113
0.3005
0.3415
0.3099
0.3509
0.3144
0.3186
0.3144
0.3186
0.3099
0.3509
0.3196
0.3602
0.3221
0.3261
0.3161
0.3059
0.3115
0.3391
0.3205
0.3481
0.3231
0.3120
0.3093
0.2993
0.3028
0.3304
0.3115
0.3391
0.3161
0.3059
0.3215
0.3350
0.3207
0.3462
0.3290
0.3538
0.3290
0.3417
0.3290
0.3417
0.3290
0.3538
0.3376
0.3616
0.3371
0.3490
0.3290
0.3300
0.3290
0.3417
0.3371
0.3490
0.3366
0.3369
0.3222
0.3243
0.3215
0.3350
0.3290
0.3417
0.3290
0.3300
0.3222
0.3243
0.3196
0.3602
0.3290
0.3690
0.3290
0.3300
0.3290
0.3300
0.3290
0.3690
0.3381
0.3762
0.3366
0.3369
0.3290
0.3180
0.3290
0.3538
0.3376
0.3616
0.3361
0.3245
0.3231
0.3120
0.3207
0.3462
0.3290
0.3538
0.3290
0.3180
0.3371
0.3490
0.3376
0.3616
0.3366
0.3369
0.3381
0.3762
0.3451
0.3554
0.3463
0.3687
0.3440
0.3428
0.3480
0.3840
0.3440
0.3427
0.3451
0.3554
0.3429
0.3307
0.3463
0.3687
0.3366
0.3369
0.3371
0.3490
0.3361
0.3245
0.3376
0.3616
0.3530
0.3597
0.3548
0.3736
0.3641
0.3804
0.3615
0.3659
0.3615
0.3659
0.3641
0.3804
0.3736
0.3874
0.3702
0.3722
0.3590
0.3521
0.3615
0.3659
0.3702
0.3722
0.3670
0.3578
0.3512
0.3465
0.3530
0.3597
0.3615
0.3659
0.3590
0.3521
0.3512
0.3465
0.3571
0.3907
0.3668
0.3957
0.3590
0.3521
0.3590
0.3521
0.3668
0.3957
0.3771
0.4034
0.3670
0.3578
0.3567
0.3389
0.3641
0.3804
0.3736
0.3874
0.3640
0.3440
0.3495
0.3339
0.3548
0.3736
0.3641
0.3804
0.3567
0.3389
0B
0S
1B
1S
2B
2S
3B
4B
4S
Region
0C
0T
1C
1T
2C
2T
3R
4C
4T
Region
0D
0U
1D
1U
2D
2U
3S
4D
4U
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
15
XLamp ® XP-G2 LED
Performance Groups – Chromaticity (continued)
Region
5A1
5B1
5C1
5D1
6A1
6B1
6C1
6D1
7A1
x
y
0.3670
0.3578
0.3686
0.3649
0.3744
0.3685
0.3726
Region
x
y
0.3686
0.3649
x
y
x
y
0.3744
0.3685
0.3726
0.3612
0.3702
0.3722
0.3763
0.3760
0.3744
0.3685
0.3763
0.3760
0.3825
0.3798
0.3804
0.3721
0.3612
0.3744
0.3685
0.3804
0.3721
0.3783
0.3646
0.3702
0.3722
0.3719
0.3797
0.3782
0.3837
0.3763
0.3760
0.3719
0.3797
0.3736
0.3874
0.3802
0.3916
0.3782
0.3837
0.3782
0.3837
0.3802
0.3916
0.3869
0.3958
0.3847
0.3877
0.3763
0.3760
0.3782
0.3837
0.3847
0.3877
0.3825
0.3798
0.3825
0.3798
0.3847
0.3877
0.3912
0.3917
0.3887
0.3836
0.3847
0.3877
0.3912
0.3917
0.3869
0.3958
0.3937
0.4001
0.3912
0.3917
0.3937
0.4001
0.4006
0.4044
0.3978
0.3958
0.3887
0.3836
0.3912
0.3917
0.3978
0.3958
0.3950
0.3875
0.3783
0.3646
0.3804
0.3721
0.3863
0.3758
0.3840
0.3681
0.3804
0.3721
0.3825
0.3798
0.3887
0.3836
0.3863
0.3758
0.3863
0.3758
0.3887
0.3836
0.3950
0.3875
0.3924
0.3794
0.3840
0.3681
0.3863
0.3758
0.3924
0.3794
0.3898
0.3716
0.3889
0.3690
0.3915
0.3768
0.3981
0.3800
0.3953
0.3720
0.3915
0.3768
0.3941
0.3848
0.4010
0.3882
0.3981
0.3800
0.3981
0.3800
0.4010
0.3882
0.4080
0.3916
0.4048
0.3832
0.3953
0.3720
0.3981
0.3800
0.4048
0.3832
0.4017
0.3751
0.3941
0.3848
0.3968
0.3930
0.4040
0.3966
0.4010
0.3882
0.3968
0.3930
0.3996
0.4015
0.4071
0.4052
0.4040
0.3966
0.4040
0.3966
0.4071
0.4052
0.4146
0.4089
0.4113
0.4001
0.4010
0.3882
0.4040
0.3966
0.4113
0.4001
0.4080
0.3916
0.4080
0.3916
0.4113
0.4001
0.4186
0.4037
0.4150
0.3950
0.4113
0.4001
0.4146
0.4089
0.4222
0.4127
0.4186
0.4037
0.4186
0.4037
0.4222
0.4127
0.4299
0.4165
0.4259
0.4073
0.4150
0.3950
0.4186
0.4037
0.4259
0.4073
0.4221
0.3984
0.4017
0.3751
0.4048
0.3832
0.4116
0.3865
0.4082
0.3782
0.4048
0.3832
0.4080
0.3916
0.4150
0.3950
0.4116
0.3865
0.4116
0.3865
0.4150
0.3950
0.4221
0.3984
0.4183
0.3898
0.4082
0.3782
0.4116
0.3865
0.4183
0.3898
0.4147
0.3814
0.4147
0.3814
0.4183
0.3898
0.4242
0.3919
0.4203
0.3833
0.4183
0.3898
0.4221
0.3984
0.4281
0.4006
0.4242
0.3919
0.4242
0.3919
0.4281
0.4006
0.4342
0.4028
0.4300
0.3939
0.4203
0.3833
0.4242
0.3919
0.4300
0.3939
0.4259
0.3853
5A2
5B2
5C2
5D2
6A2
6B2
6C2
6D2
7A2
Region
5A3
5B3
5C3
5D3
6A3
6B3
6C3
6D3
7A3
Region
5A4
5B4
5C4
5D4
6A4
6B4
6C4
6D4
7A4
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
16
XLamp ® XP-G2 LED
Performance Groups – Chromaticity (continued)
Region
7B1
7C1
7D1
8A1
8B1
8C1
8D1
x
y
0.4221
0.3984
0.4259
0.4073
0.4322
0.4096
0.4281
Region
x
y
0.4259
0.4073
x
y
x
y
0.4322
0.4096
0.4281
0.4006
0.4299
0.4165
0.4364
0.4188
0.4322
0.4096
0.4364
0.4188
0.4430
0.4212
0.4385
0.4119
0.4006
0.4322
0.4096
0.4385
0.4119
0.4342
0.4028
0.4342
0.4028
0.4385
0.4119
0.4449
0.4141
0.4403
0.4049
0.4385
0.4119
0.4430
0.4212
0.4496
0.4236
0.4449
0.4141
0.4449
0.4141
0.4496
0.4236
0.4562
0.4260
0.4513
0.4164
0.4403
0.4049
0.4449
0.4141
0.4513
0.4164
0.4465
0.4071
0.4259
0.3853
0.4300
0.3939
0.4359
0.3960
0.4316
0.3873
0.4300
0.3939
0.4359
0.3960
0.4342
0.4028
0.4403
0.4049
0.4359
0.3960
0.4403
0.4049
0.4465
0.4071
0.4418
0.3981
0.4316
0.3873
0.4359
0.3960
0.4418
0.3981
0.4373
0.3893
0.4373
0.3893
0.4418
0.3981
0.4475
0.3994
0.4428
0.3906
0.4418
0.3981
0.4465
0.4071
0.4523
0.4085
0.4475
0.3994
0.4475
0.3994
0.4523
0.4085
0.4582
0.4099
0.4532
0.4008
0.4428
0.3906
0.4475
0.3994
0.4532
0.4008
0.4483
0.3919
0.4465
0.4071
0.4513
0.4164
0.4573
0.4178
0.4523
0.4085
0.4513
0.4164
0.4562
0.4260
0.4624
0.4274
0.4573
0.4178
0.4573
0.4178
0.4624
0.4274
0.4687
0.4289
0.4634
0.4193
0.4523
0.4085
0.4573
0.4178
0.4634
0.4193
0.4582
0.4099
0.4582
0.4099
0.4634
0.4193
0.4695
0.4207
0.4641
0.4112
0.4634
0.4193
0.4687
0.4289
0.4750
0.4304
0.4695
0.4207
0.4695
0.4207
0.4750
0.4304
0.4813
0.4319
0.4756
0.4221
0.4641
0.4112
0.4695
0.4207
0.4756
0.4221
0.4700
0.4126
0.4483
0.3919
0.4532
0.4008
0.4589
0.4021
0.4538
0.3931
0.4532
0.4008
0.4582
0.4099
0.4641
0.4112
0.4589
0.4021
0.4589
0.4021
0.4641
0.4112
0.4700
0.4126
0.4646
0.4034
0.4538
0.3931
0.4589
0.4021
0.4646
0.4034
0.4593
0.3944
7B2
7C2
7D2
8A2
8B2
8C2
8D2
Region
7B3
7C3
7D3
8A3
8B3
8C3
8D3
Region
7B4
7C4
7D4
8A4
8B4
8C4
8D4
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
17
XLamp ® XP-G2 LED
Cree’s Standard Chromaticity Regions Plotted on the 1931 CIE Curve
ANSI Cool White
0.40
5000 K
0.39
5700 K
0.38
3S
0.37
6500 K
2T
0.36
0.35
CCy
3B
2S
2C
1T
8000 K
0T
0.33
0S
0.32
0.31
2D
1C
0C
1D
2U
ANSI
C78.377A
2R
1A
1U
0D
0A
3R
2A
1B
0B
3A
2B
1S
0.34
1R
0U
0.30
0R
0.29
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.29
0.28
0.28
CCx
Neutral White
0.44
0.43
3500 K
6T
0.42
4000 K
0.41
4500 K
5T
0.40
5S
5000 K
0.39
CCy
6S
4T
5B3
5B2
4S
0.38
3T
3S
0.37
5A2
4B
3C
0.36
3B
3D
0.35
4D
4A
5A1
5B4
5D2
5A3
5A4
5C4
5C1
5D1
5D3
5D4
6B1
6A1
6A4
6D3
6D2
6A3
6A2
6C4
6C1
6B4
6D4
6D1
6U
6R
5U
5R
4U
3A
0.34
5B1
4C
6B2
5C3
5C2
6C3
6C2
6B3
ANSI
C78.377A
4R
3U
3R
0.33
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.32
CCx
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
18
XLamp ® XP-G2 LED
Cree’s Standard Chromaticity Regions Plotted on the 1931 CIE Curve - continued
ANSI Neutral White and ANSI Warm White
0.46
0.45
2700 K
3000 K
0.44
0.43
3500 K
0.42
4000 K
CCy
6C3
4500 K
6C2
6B3
0.40
6B2
5C3
5000 K
0.39
5B3
5C4
5B4
0.38
5B1
4C
0.37
7A1
7A4
7A3
7D1
7D2
7D4
7D3
8A1
8A3
8A2
8A4
4D
8D1
8B4
8D2
8C2
8C1
8C3
8C4
8D3
8D4
6D4
6D1
6A4
5D4
6A1
5D1
ANSI
C78.377A
5A4
3C
0.36
5D2
5A3
5A2
4B
6D2
6A3
6A2
5D3
7A2
6D3
6B1
5C1
5B2
6C1
6B4
5C2
8B1
7C4
7C1
7B4
7B1
6C4
7C2
7B3
7B2
0.41
8B3
8B2
7C3
5A1
3B
4A
3D
0.35
3A
0.34
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.33
CCx
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
19
XLamp ® XP-G2 LED
Cree’s Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions
0.40
0.40
5000 K
0.39
0.38
3S
51
6500 K
0.36
6500 K
0T
0C
0A
0S
CCy
0.32
0.31
1R
0C
0D
0A
0U
CCx
CCx
0.40
0.40
5000 K
0.39
5000 K
0.39
0.38
5700 K
0.38
6500 K
0.36
2T
6500 K
8000 K
1U
0A
0R
ANSI
C78.377A
2R
1U
1R
0U
0.36
0.35
0.28
0.35
0.34
0.33
0.32
0.31
CCx
0.34
0.28
0.36
0.28
0.30
2U
0R
0.29
0.29
1D
1A
0D
0.30
0.29
0.28
0C
0B
0.31
1R
0U
0.30
0S
0.32
3R
2A
1B
0.33
0A
ANSI
C78.377A
2R
1A
0D
0T
0.33
2U
2D
1C
0.32
0B
0.31
1D
3A
2B
1S
0.31
0.32
2A
1B
0C
2C
8000 K
0.34
3B
2S
1T
3R
0.30
0S
2D
1C
0.29
0T
0.33
3A
2B
1S
2T
E1
0.35
CCy
0.34
0.36
3B
2C
1T
3S
0.37
2S
0.35
5700 K
3S
50
0.37
CCy
0.36
0.28
0.35
0.34
0.33
0.32
0.31
0.30
0.30
0.28
0.29
0.28
0.36
0.29
0.29
1R
0R
0.29
0.28
1U
0U
0.30
0R
ANSI
C78.377A
2R
1A
0B
2U
1D
0.35
0.30
1U
3R
2A
1B
0.34
0.31
ANSI
C78.377A
2R
1A
0D
2D
1C
0.33
0B
0T
3A
2B
1S
0.33
2U
1D
0.34
0.32
0S
0.32
3R
2A
1B
8000 K
2D
3B
2C
1T
3A
2B
1C
3S
2T
2S
0.35
0.31
0.33
0.36
3B
1T
1S
53
0.37
2C
8000 K
0.34
5700 K
2T
2S
0.35
CCy
0.38
5700 K
0.37
5000 K
0.39
CCx
0.40
5000 K
0.39
0.38
5700 K
E2
0.37
6500 K
0.36
3B
2S
0.35
CCy
3S
2T
2C
1T
8000 K
0.34
0T
0.33
0S
0.32
0C
0.31
3R
2A
2U
1D
ANSI
C78.377A
2R
1A
0D
0A
2D
1C
1B
0B
3A
2B
1S
1U
1R
0U
0.30
0R
0.29
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.29
0.28
0.28
CCx
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
20
XLamp ® XP-G2 LED
Cree’s Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions
0.46
0.45
2700 K
3000 K
0.44
0.43
0.42
4000 K
0.41
E6
4500 K
E5
0.40
CCy
E7
3500 K
5000 K
0.39
0.38
E3
0.37
E4
6D2
6A2
5D3
7D1
7A4
7A1
8D1
8A4
8A1
7D4
3B
8B3
8C1
8B4
8C2
8C3
8C4
8D3
8D2
8D4
6A4
6A1
5D4
5D1
ANSI
C78.377A
5A4
3C
8B2
6D1
5D2
5A2
6D4
7A3
7A2
6D3
6A3
5B4
5A1
4D
0.36
6B1
5C4
5A3
4B
6C1
8A3
8A2
7D3
7D2
8B1
7C4
7C1
7B4
7B1
6C4
6B4
5C1
5B1
4C
6B2
5C3
5C2
5B3
5B2
6C2
6B3
7C2
7B3
7B2
6C3
7C3
E8
4A
3D
0.35
3A
0.34
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.33
CCx
0.46
0.45
2700 K
3000 K
0.44
0.43
3500 K
0.42
4000 K
0.41
4500 K
CCy
0.40
0.39
F4
0.38
0.37
5C4
5D2
7A2
6D3
6D2
6A3
6A2
5D3
5A3
6C1
6D4
7A1
7A4
7C1
7B4
7B1
6C4
6B4
6B1
5C1
5B1
5A2
4B
7A3
7D1
7D2
7D4
7D3
8A1
8A2
8A4
8A3
8D1
8B4
8D2
8C1
8C2
8C3
8C4
8D3
8D4
6D1
6A4
5D4
6A1
5D1
ANSI
C78.377A
5A4
4D
3B
5B3
5B4
3C
0.36
5C3
5B2
4C
6C2
8B1
7C4
8B3
8B2
7C3
7C2
7B3
7B2
6B2
5C2
F7
6C3
6B3
F5
5000 K
F6
F8
5A1
4A
3D
0.35
3A
0.34
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.33
CCx
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
21
XLamp ® XP-G2 LED
Cree’s Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions Continued
0.46
0.45
2700 K
3000 K
0.44
0.43
0.42
Z6
4000 K
0.41
Z5
4500 K
0.40
CCy
Z7
3500 K
0.39
5B3
5B1
4C
0.37
6D4
7A1
7A4
7A3
7D1
7D2
7D4
7D3
8A1
8B1
7C4
8A2
8A4
8A3
8D1
4D
8B2
8B3
8B4
8D2
8C1
8C2
8C3
8C4
8D3
8D4
6D1
6A4
5D4
6A1
5D1
ANSI
C78.377A
5A4
3C
3B
6A2
5D3
7A2
6D3
6D2
6A3
5D2
5A3
5A2
4B
6B1
5C4
5C1
5B4
0.38
6C1
7C1
7B4
7B1
6C4
6B4
5C2
5B2
0.36
6C2
6B3
6B2
5C3
5000 K
7B3
7B2
6C3
7C3
7C2
Z8
5A1
4A
3D
0.35
3A
0.34
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.33
CCx
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
22
XLamp ® XP-G2 LED
Cree’s Standard Chromaticity Kits
The following table provides the chromaticity bins associated with chromaticity kits.
Color
Cool
White
Neutral
White
Warm
White
CCT
Kit
Chromaticity Bins
6200 K
51
0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S
6000 K
53
1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S
6200 K
50
1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D
6500 K
E1
1A, 1B, 1C, 1D
5700 K
E2
2A, 2B, 2C, 2D
5000 K
E3
3A, 3B, 3C, 3D
4750 K
F4
3C, 3D, 4A, 4B
4500 K
E4
4A, 4B, 4C, 4D
4250 K
F5
4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4
4000 K
E5
5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4
4000 K
Z5
5A3, 5B4, 5C1, 5D2
3750 K
F6
5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4
3500 K
E6
6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4
3500 K
Z6
6A3, 6B4, 6C1, 6D2
3250 K
F7
6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4
3000 K
E7
7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4
3000 K
Z7
7A3, 7B4, 7C1, 7D2
2850 K
F8
7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4
2700 K
E8
8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4
2700 K
Z8
8A3, 8B4, 8C1, 8D2
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
23
XLamp ® XP-G2 LED
Bin and Order Code Formats
XP-G2 bin codes and order codes are configured in the following manner:
Order Code
Bin Code
Series
XPG = XP-G
Series
XPG = XP-G
Color specification
01 = Outdoor White
B1 = 70 CRI minimum
L1 = Standard CRI
H1 = 80 CRI minimum
P1 = 85 CRI minimum
U1 = 90 CRI minimum
Color specification
01 = Outdoor White
B1 = 70 CRI minimum
L1 = Standard CRI
H1 = 80 CRI minimum
P1 = 85 CRI minimum
U1 = 90 CRI minimum
Kit number
Luminous flux group
SSSCCC-BD-HHHH-NNNNN
SSSCCC-BD-WWW-FF-G-AA
Internal code
Internal code
Color
BWT = Gen 2 White
Chromaticity bin
Color
BWT = Gen 2 White
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
24
XLamp ® XP-G2 LED
Reflow Soldering Characteristics
In testing, Cree has found XLamp XP-G2 LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general
guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used.
Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
tP
TP
Critical Zone
TL to TP
Temperature
Ramp-up
TL
tS
Tsmax
Tsmin
Ramp-down
ts
Preheat
25
t 25˚C to Peak
IPC/JEDEC J-STD-020C
Time
Profile Feature
Average Ramp-Up Rate (Tsmax to Tp)
Lead-Free Solder
1.2 °C/second
Preheat: Temperature Min (Tsmin)
120 °C
Preheat: Temperature Max (Tsmax)
170 °C
Preheat: Time (tsmin to tsmax)
Time Maintained Above: Temperature (TL)
Time Maintained Above: Time (tL)
Peak/Classification Temperature (Tp)
65-150 seconds
217 °C
45-90 seconds
235 - 245 °C
Time Within 5 °C of Actual Peak Temperature (tp)
20-40 seconds
Ramp-Down Rate
1 - 6 °C/second
Time 25 °C to Peak Temperature
4 minutes max.
Note: All temperatures refer to topside of the package, measured on the package body surface.
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
25
XLamp ® XP-G2 LED
Notes
Measurements
The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely
represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors
that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated values are
provided for informational purposes only and are not intended as specifications.
Pre‑Release Qualification Testing
Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp
LEDs and details of Cree’s pre-release qualification testing for XLamp LEDs.
Lumen Maintenance
Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance.
For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document.
Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting.
Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect
the LED junction temperature.
Moisture Sensitivity
Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering.
Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp XP-G2 LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in
conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered LEDs
in the original MBP.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product
Documentation sections of www.cree.com.
REACh Compliance
REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA)
has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative
to insure you get the most up-to-date REACh Declaration. REACh banned substance information (REACh Article 67) is also available upon
request.
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
26
XLamp ® XP-G2 LED
Notes - Continued
UL® Recognized Component
Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/
UL 8750.
Vision Advisory
WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please
refer to the LED Eye Safety application note.
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
27
6
5
NOTICE
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
CONTAINED WITHIN ARE THE PROPRIETARY AND
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON
THE
WITHOUT
WRITTEN CONSENT
OF CREE INC.
1
1.01
3
Mechanical Dimensions (TA = 25 °C)
Thermal vias, if present, are not shown on these drawings.
D
3.30
All measurements are ±.13 mm unless otherwise indicated.
.50
2.30
2.26
3.45
6
5
6
5
NOTICE
NOTICE
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
CREE CONFIDENTIAL.
THIS
PLOT AND THE
OPTICAL
CONTAINED
WITHIN ARE THE
PROPRIETARY
AND INFORMATION
CONTAINED
WITHIN AREOF
THE
PROPRIETARY
AND
CONFIDENTIAL
INFORMATION
CREE,
INC. THIS PLOT
REFERENCE
CONFIDENTIAL
INFORMATIONOR
OFDISCLOSED
CREE, INC. THIS
PLOT
MAY NOT
BE COPIED, REPRODUCED
TO ANY
MAY NOT BE
COPIED,
REPRODUCED
OR DISCLOSED TO ANY
UNAUTHORIZED
PERSON
THE
WITHOUT
WRITTEN CONSENT
UNAUTHORIZED
PERSON
THE
WITHOUT
WRITTEN
CONSENT
OF CREE INC.
OF CREE INC.
4
.73
4
.50
3
3
REV
3.45
D
4 4 D
3 3
3.45
C
2 2
REVISONS
REVISONS
OPTICAL
2.26
REV
REV REFERENCE DESCRIPTION
2.26
DESCRIPTION
3.45
R1.53
OPTICAL
OPTICAL
REFERENCE
REFERENCE
Top View
3.30
1 1
3.45
2.26
2.26
.73.73
C
3.30
.50
2.30
1.30
.58
Side View
PRIMARY
D D
.50.50
2.30
2.30
3.45
.50
2.30
BYBY DATE
APP'D
DATE
APP'D
.73
.73
.50
.50
3.30
3.30
3.30
REF.
3.30
REF.
.50.50
OPTICAL
OPTICAL
REFERENCE
REFERENCE
C
.50
R1.53
.50
R1.53
.50
.58
1.30
.64
.58
3.30
3.30
B
3.30
REF.
3.30
REF.
1.30
PRIMARY
PRIMARY
C C
3.30
R1.53
R1.53
30
XLamp ® XP-G2 LED
4
Anode
.58.58
Anode
1.30
1.30
Bottom View
.50
PRIMARY
PRIMARY
.50
Alternate
Bottom View
ALTERNATIVE
ALTERNATIVE
.50
.50
.50
.50
1.30
B
.25
3.30
.64
1.01
2.30
3.30
3.30
B
A
RECOMMENDED PCB SOLDER PAD
3.30
.75
3.30
3.30
3.30
5
1.30
A
.25.25
A
3.30
1.30
4
1.01
1.01
2.30
3.30
3.30
Recommended PCB Solder Pad
RECOMMENDED PCB SOLDER PAD
RECOMMENDED PCB SOLDER PAD
ALL DIMENSIONS
UNLESS OT
DIMENSI
MILLIMETER
TOLERANCE
.XX ±
.XXX±
.25
X° ±
THIRD ANGLE PROJECTION
FOR SHEET
.X ±
.XX ±
.XXX±
B B
.75
X° ±
.75
SURFACE F
RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING).25
.64.64
6
.64
3
ALL DIMENSIONS ARE ±
ALL DIMENSIONS
2.30
3.30
UNLESS OTHERWISE
UNLESS ARE
OTH
DIMENSIONS
DIMENSIO
MILLIMETERS
AND AF
Recommended Stencil Pattern
RECOMMENDED STENCIL PATTERN
MILLIMETERS
TOLERANCE
UNLESS
RECOMMENDED
STENCIL PATTERN
TOLERANCE
(Hatched
is Open)
.XX
± .25
(HATCHED
AREAArea
IS OPENING)
.XX ±
(HATCHED AREA IS OPENING)
.XXX± .125
.75.75
.XXX±
X° ± .5°
THIRD ANGLE PROJECTION
X° ± P
SHEET METAL
THIRD ANGLE FOR
PROJECTION
FOR SHEET
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
ALLALL
DIMENSIONS
ARE
± .13MM
UNLESS
OTHERWISE
NOTED
DIMENSIONS
ARE
± .13MM
UNLESS
OTHERWISE
NOTED
2.30
2.30
3.30
3.30
6
6
5
DATE
DRAWN
BY
DATE
DRAWN
BY
5SPECIFIED
UNLESS
OTHERWISE
UNLESS
OTHERWISE
SPECIFIED
4
4
3
3
.X ± 1.5
.X ±
.XX ± .75
.XX ±
.XXX± .25
.XXX±
X° ± .5°
X° ±
28
1.6
SURFACE FINISH:
SURFACE F
REF
REF
4.375
X
SECTION Y-Y
R
Ao
4
2.2
±0.
0
Po
4.0 ±0.1 (II)
CATHODE SIDE
Y
5
4.375
F(III)
5
3.70
2.40
5.50
8.00
12.00
+/- 0.1
+0.0/-0.1
+/- 0.05
X
3.70
+/- 0.1
Bo
Ko
F
3.70
2.40
5.50
8.00
12.00
+/- 0.1
+0.0/-0.1
+/- 0.05
+/- 0.1
+0.3/-0.1
(I)
4
Ao
REV
B
REF 0.59
4
Measured from centerline of sprocket hole
to centerline of pocket.
(II)
Cumulative tolerance of 10 sprocket
2
1
holes is ± 0.20.
REVISONS
(III)
Measured from centerline
of sprocket
BY
DATE
APP'D
DESCRIPTION
ADDED CATHODE AND ANODE NOTE
hole to centerlineDC
of pocket.
2/26/12
REORIENTED DEVICE
(IV)
Other material available.
ANODE SIDE
3
P1
2.2
P1
W
Y
R
SECTION Y-Y
D1
1.5 MIN.
+/- 0.1
REF
Bo
Ko
F
NOTICE
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
CONTAINED WITHIN ARE THE PROPRIETARY AND
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT
OF CREE INC.
3.70
Ao
P1
W
W
Bo
Ao
R0.2
TYPICAL
Ko
All dimensions in mm.
E1
1.75 ±0.1
5
P2
2.0 ±0.05 (I)
X
6
Y
D1
1.5 MIN.
REF
1.5
SECTION X-X
REF
R
R0.2
TYPICAL
Ko
R0.2
TYPICAL
Y
Ko
P1
D1
All Cree carrier tapes conform to EIA-481D, Automated
Component Handling Systems
Standard.
1.5
MIN.
SECTION Y-Y
REF 0.59
Tape and Reel
Do
F(III)
Bo
XLamp ® XP-G2 LED
Bo
X
T 0.30 ±0.05
4.375
+/- 0.1
+0.3/-0.1
D
D
SECTION X-X
1.5± .1
Ao
3.70
8±.1
3.70
+/- 0.1
2.40
+0.0/-0.1
5.50
+/- 0.05
8.00
P1
+/- 0.1
6
NOTICE
CREE CONFIDENTIAL.
THIS PLOT AND
W
12.00THE INFORMATION
+0.3/-0.1
Bo
Ko
F
User Feed Direction
+/- 0.1
END
5
4
Loaded Pockets
(1000 Lamps)
6
NOTICE
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
CONTAINED WITHIN ARE THE PROPRIETARY AND
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
OF CREE, INC.
+.3
2
-.0
3
ÓÉ Foxit PDF Editor ±à¼°æȨËùÓÐ (c) by Foxit Software Company, 2004
½öÓÃÓÚÆÀ¹À¡£
C
1
ANODE SIDE
Trailer
160mm (min) of
empty pockets
sealed with tape
(20 pockets min.)
D
Measured from centerline of sprocket hole
to centerline of pocket. 4±.1
Cumulative tolerance of 10 sprocket
2.5±.1
1.75
STARTholes is ± 0.20.
±.10
(III)
Measured from centerline of sprocket
hole to centerline of pocket.
(IV)
Other material available.
12.0
(II)
CATHODE SIDE
CONTAINED WITHIN ARE THE PROPRIETARY AND
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
OF CREE, INC.
C
(I)
5
4
Leader
400mm (min.) of
empty pockets with
at least 100mm
sealed by tape
(50 empty pockets min.)
D
3
2
ÓÉ Foxit PDF Editor ±à¼°æȨËùÓÐ (c) by Foxit Software Company, 2004
½öÓÃÓÚÆÀ¹À¡£
1
16.40
User Feed Direction
Ø190
B
D
D
B
C
Carrier Tape
C
16.40
Pocket Tape
Ø190
Ø61 ± 0.5
13mm
C
7"
OD
C
A
7.5
12.40 +2.00
0
MEASURED AT HUB
''
THIRD ANGLE PROJECTION
B
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
.XX ±
.25
.XXX ±
.125
X°
±
.5 °
DATE
DRAWN BY
D. CRONIN
DATE
---
--
6
5
OD
4
--
1.6
7.5
3
''
Fax (919) 313-5558
A
DATE
APPROVED
FOR SHEET METAL PARTS ONLY MATERIAL
.X
±
1.5
.XX ±
.75
Ø61 FINAL
± 0.5
.XXX ±
.25
PROTECTIVE FINISH
X°
±
.5 °
SURFACE FINISH:
Phone (919) 313-5300
--
--
Ø13
4600 Silicon Drive
Durham, N.C 27703
11/29/10
CHECK
TITLE
SIZE
SCALE
B
XP HEW LOADING
SPEC
C
REV.
DRAWING NO.
2402-00014
SHEET
3.000
2
B
OF
1 /1
1
12.40
12.40 +2.00
0
MEASURED AT INSIDE EDGE
MEASURED AT HUB
B
B
Copyright © 2012-2016 Cree, Inc.
Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Ø13All rights reserved. The information in this document is subject to change without notice.UNLESS
OTHERWISE SPECIFIED
®
2012/5/25
LIUDEZHI
Cree,
A Inc. UL and the UR logo are registered trademarks of UL LLC.
DIMENSIONS ARE IN
12.40
THIRD ANGLE PROJECTION
MEASURED
AT INSIDE EDGE
MILLIMETERS & BEFORE FINISH.
TOLERANCE UNLESS SPECIFIED:
.X ± 0.3
.XX ± .13
X°
± 1°
FOR SHEET METAL PARTS ONLY
.X ± .25
DRAWN BY
DATE
CHECK
DATE
APPROVED
DATE
4600 Silicon Drive
Durham, N.C 27703
Phone (919) 361-4770
A
TITLE
Reel,
MATERIAL
PS
FINAL PROTECTIVE FINISH
SIZE
7" x 12mm Wide
DRAWING NO.
2400-00005
REV.
B
29
XLamp ® XP-G2 LED
Packaging
Unpackaged Reel
Vacuum-Sealed
Vacuum-Sealed
Moisture
Barrier Bag
Moisture Barrier Bag
Label
CREE
Binwith
Code Cree Bin
&
Barcode
LabelLot #
Code,
Qty,
Label with Cree Bin Code,
Quantity, Reel ID
Label
with
Cree Bin
Label with
Customer
P/N, Qty,Qty,
Lot #, Lot
PO # #
Code,
Packaged Reel
Patent Label
Label with Customer Order
Label
with Cree Order Code,
Code, Qty, Reel ID, PO #
Quantity, Reel ID, PO #
Label with Cree Bin Code,
Quantity, Reel ID
Boxed Reel
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Bin Code,
Quantity, Reel ID
Patent Label
(on bottom of box)
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
30