CLD-CT1230.007 PRODUCT FAMILY DATA SHEET Cree® PLCC4 3 in 1 RGB SMD LED CLMVB-FKA PRODUCT DESCRIPTION FEATURES APPLICATIONS The CLMVB-FKA full-color RGB LED • Size (mm):2.0x 2.0 • Full-Color Video Screen offers a high-intensity light output and a • Dominant Wavelength: Red (619 - 624nm) Green (520 - 540nm) Blue (460 - 480nm) • Decorative lighting wide viewing angle. The compact 2mm x 2mm package allows for a very high resolution screen and is designed to work in a wide array of environmental conditions. Cree PLCC full-color RGB LEDs are suited for indoor video screen, decorative lighting WWW.CREE.COM/HB applications. and amusement • Amusement • Luminous Intensity (mcd) Red (224 - 450)@ 20mA Green (180 - 450)@10mA Blue (56 - 140)@ 10mA • Lead-Free • RoHS Compliant Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. the Cree logo are registered trademarks of Cree, Inc. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp Cree PLCC4 3 in 1 SMD RGB LED CLMVB-FKA ABSOLUTE MAXIMUM RATINGS (TA = 25°C) Items Symbol Absolute Maximum Rating Unit R G B IF 25 17 17 mA IFP 100 70 70 mA Reverse Voltage VR 5 5 5 V Power Dissipation PD 65 65 65 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 110 110 °C Junction/ambient 1 chip on RTHJA 450 400 450 °C/W Junction/solder point 1 chip on RTHJS 300 280 300 °C/W Forward Current Note 1 Peak Forward Current Note 2 Note: 1.Single-color light. 2.Pulse width ≤0.1 msec, duty ≤1/10. TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (TA = 25°C) Characteristics Condition Symbol Dominant Wavelength IF = 20 mA(R) IF = 10 mA(B.G) Spectral bandwidth at 50% IREL max IF = 20 mA(R) IF = 10 mA(B.G) Forward Voltage IF = 20 mA(R) IF = 10 mA(B.G) Luminous Intensity Reverse Current (max) Values Unit R G B λDOM 619~624 520~540 460~480 nm Δλ 24 38 28 nm VF(avg) 2.0 3.0 3.0 V VF(max) 2.6 3.8 3.8 V IF = 20 mA(R) IF = 10 mA(B.G) IV(min) 224 180 56 mcd IV(avg) 280 260 81 mcd VR = 5 V IR 10 10 10 μA Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 2 Cree PLCC4 3 in 1 SMD RGB LED CLMVB-FKA INTENSITY BIN LIMIT (RED IF = 20 mA,GREEN & BLUE IF = 10 mA ) Red Green Blue Bin Code Min.(mcd) Max.(mcd) Bin Code Min.(mcd) Max.(mcd) Bin Code Min.(mcd) Max.(mcd) F 224 280 E 180 224 L 56 71 de 252 318 bc 202 252 3c3b 64 81 G 280 355 F 224 280 A 71 90 fg 318 403 de 252 318 3a4 81 101 H 355 450 G 280 355 B 90 112 fg 318 403 56 101 126 H 355 450 C 112 140 Tolerance of measurement of luminous intensity is ±10%. COLOR BIN LIMIT (RED IF = 20 mA,GREEN & BLUE IF = 10 mA ) Red Green Blue Bin Code Min.(nm) Max.(nm) Bin Code Min.(nm) Max.(nm) Bin Code Min.(nm) Max.(nm) RB 619 624 G7 520 525 B3 460 465 G23 522.5 527.5 B23 462.5 467.5 G8 525 530 B4 465 470 G45 527.5 532.5 B45 467.5 472.5 G9 530 535 B5 470 475 G67 532.5 537.5 B67 472.5 477.5 Ga 535 540 B6 475 480 Tolerance of measurement of dominant wavelength is ±1 nm. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 3 Cree PLCC4 3 in 1 SMD RGB LED CLMVB-FKA ORDER CODE TABLE* Luminous Intensity (mcd) Kit Number Color CLMVB-FKA-CFHEHLCBB7a363 CLMVB-FKA-CF1E1L1BB7D3D3 CLMVB-FKA-CG1F1A1BB8C3C3 Color Bin Min. (nm) Color Bin Max. (nm) Package 450 RB 619 RB 624 Reel 450 G7 520 Ga 540 Reel B3 460 B6 480 Reel RB 619 RB 624 Reel Min. Max. Red 224 Green 180 56 140 Blue Dominant Wavelength (nm) Red Any 1 Intensity bin from F(224) - G(355) Green Any 1 Intensity bin from E(180) - G(355) Any 1 hue bin from G7(520) - Ga(540) Reel Blue Any 1 Intensity bin from L(56) - B(112) Any 1 hue bin from B3(460) - B6(480) Reel Red Any 1 Intensity bin from G(355) - H(450) Green Any 1 Intensity bin from F(224) - H(450) Any 1 hue bin from G8(525) - Ga(540) Reel Blue Any 1 Intensity bin from A(71) - C(140) Any 1 hue bin from B3(460) - B5(475) Reel RB 619 RB 624 Reel Notes: 1. The above kit numbers represent the order codes which include multiple intensity-bin and color-bin codes. Only one intensity-bin code and one color-bin code will be shipped on each reel. Single intensity-bin code and single color- bin code will be orderable in certain quantities. 2. For example, any 1 intensity-bin from F - H means only 1 intensity-bin (F or de or G or fg or H) will be shipped by Cree. 3. For example, any 1 color-bin from G7 - Ga means only 1 color-bin (G7 or or G23 or G8 or G45 or G9 or G67 or Ga) will be shipped by Cree. 4. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 5. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 4 Cree PLCC4 3 in 1 SMD RGB LED CLMVB-FKA GRAPHS The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 5 Cree PLCC4 3 in 1 SMD RGB LED CLMVB-FKA GRAPHS The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 6 Cree PLCC4 3 in 1 SMD RGB LED CLMVB-FKA MECHANICAL DIMENSIONS All dimensions are in mm. NOTES RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 7 Cree PLCC4 3 in 1 SMD RGB LED CLMVB-FKA KIT NUMBER SYSTEM Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 8 Cree PLCC4 3 in 1 SMD RGB LED CLMVB-FKA REFLOW SOLDERING • • • • The CLMVB-FKA is rated as a MSL 5a product. After opening the sealed bag,the SMD LED must be stored under the condition<30ºC and<60%RH. Under these conditions,the SMD LEDs must be used (subject to reflow) within 24 hours after bag opening, and baking 24-hour/80ºC is required when exceeding 24 hours. Note that baking must only be done once. Document No.: COTCO-05-0057 The temperature profile is as below. Rev. NO.: 13 Temperature Melting-point Pre-heat Soak Cooling Reflow Time Use all SMD besides LP6-NPP1-01-N1 Solder = Sn63-Pb37 Soldering pad: Solder = Lead-free Average ramp-up rate =4ºC/s max. Average ramp-up rate =4ºC/s max Use only with CLMVB-FKA Preheattemperature = 100ºC ~150ºC Preheattemperature = 150ºC ~200ºC Ramp-down rate =6ºC/s max. Ramp-down rate =6ºC/s max. Average ramp-up rate = 4ºC/s max Preheat temperature = 150ºC ~200ºC = 230ºC max. Time within5ºC actual Ramp-down rate = 6ºC/sofmax Peak temperature = 235ºC maxis Duration above 183ºC Peaktemperature = 250ºC max. Peak Temperature = 10s max. 80s max. Time within5ºC of actual Peak Temperature = 10s max. Duration above 217ºC is 80s max. Peaktemperature Preheat time = 120s max Preheattime = 100s max. Solder Preheattime = 100s max. Time within 5ºC of actual Peak Temperature = 10s max Only use217ºC LP6-NPP1-01-N1 Duration above is 45s max [13] Solder = Low Lead-free Average ramp-up rate =3ºC/s max. Preheattemperature = 130ºC ~170ºC Preheattime = 120s max. Ramp-down rate =6ºC/s max. Peaktemperature = 213ºC max. Time within3ºC of actual Peak Temperature = 25s max. Duration above 200ºC is 40s max. Recommended solder pad designfor heat dissipation (2-pin SMD LED): Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 7.0 9 2.6 Cree PLCC4 3 in 1 SMD RGB LED CLMVB-FKA PACKAGING • • • • • The boxes are not water resistant and they must be kept away from water and moisture. The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation. The reel pack is applied in SMD LED. Max 12800 pcs per reel. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 10